Samba As Windows PDC problem + AD

Hello All,
In an effort to minimize the amount of different logins my users have, I am trying to create a windows domain with Samba as a PDC in OSX Server 10.6.6. Before attempting to "create" this domain Samba was running on the server as a "Standalone" server with default settings. When the role of the SMB server is changed to "Primary Domain Controller" a Fatal Error shows up in the logs saying it cannot find its workgroup. Here is a sample:
# [2011/04/13 19:22:06, 0, pid=148] /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup "#####"
I have gone thru and tried to reset all settings for samba, shutting it down and restarting, deactivating the service. I have also scoured the internet to find a solution. Reading thru the manual for Samba PDC in apples documentation make this process seem as if it were as easy as pie. I am stumped.
My ultimate goal is to create this domain and have a Windows 2008 SBS authenticate to it. The SBS will be acting as a terminal services machine.
In everything I have read, the "Normal" or accepted setup is to have OD authenticate to AD, not the other way around. Since our system is entirely Mac(except the accounting server) and our OD is active and running, I would prefer not to change to AD.
Can anyone shed some light on what might be wrong? Any help is greatly appreciated.
Sincerely,
-Netti

Did I post this in the wrong place. Please, any advice is appreciated.

Similar Messages

Error while working samba through Windows XP+SP2

Subject: Error while working samba through Windows XP+SP2
Hi,
I have problem with SAMBA Server on SOLARIS 10.0 while browsing shares through MS Windows XP Pro + SP2.
Descriptions:
1) SAMBA Configuration:
#==== global settings ======
[global]
security = user
hosts allow = 192.168.9. 200.0.0. 127. 127.0.0.1
unix password sync = yes
remote announce = 200.0.0.255/Workgroup
192.168.9.255/workgroup
remote browse sync = 200.0.0.255 192.168.9.255
restrict anonymous = yes
root directory = %H
deadtime = 5
#==== shares ======
[homes]
comment = Directory for User: %U
browseable = no
writable = yes
[%U]
comment = Private Directory for User: %U, R.Host: %m
path = %H
valid users = %U
browseable = yes
read only = no
profile acls = yes
[temp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
2) This configuration tested with MS Windows 2000 family and Windows XP Pro+SP2
When I'm going to browse server by windows family stations, server asked for username/password, after authentication on both clients (Win XP and Win 2000) the share list appears correctly. for browsing shares contents through windows 2000 I have no problem but when i want to browse shares contents with windows xp+sp2 error message appears with "Access denied." subject.
How can I solve this problem?
Any help would be greatly appreciate.
M.Chitsaz

UPDATE
i was able to connect and synced songs yesterday.
but when i tried it again today. i cant connect again.
i tried to disconnect and reconnect million times and i even dropped
my iPOD and now it has some scratch and i hate it.

Samba mounting windows share

Hi, I'm trying to mount a windows share but all I can do after mounting is seeing the folders and files on the share. I can not read any file, I get "permission denied". On windows everything should be set to allow for the files to be read (if my brother didn't forget, overlooked anything). I even disabled the windows firewall.
The windows 2000 computer can access the arch linux samba shares without a problem.
I'm running arch current up to date.
Here's how I mount, as root:
mount -t smbfs -o username=gast,password=gast //192.168.0.132/Muziek /mnt/LW/Muziek/
(gets mounted succesfully, but I can't read the files)
Here's my /etc/samba/smb.conf:
#Global Parameters
[global]
workgroup = THUIS
netbios name = gel
passdb backend = smbpasswd
force create mode = 0770
force directory mode = 0770
wins support = yes
case sensitive = no
encrypt passwords = yes
security = share
server string = Linux
[share]
path = /mnt/hda1
public = yes
only guest = yes
writable = no
printable = no
create mask = 777
Can anyone help me out? I've been trying to get it working for at least a few hours :s.

You are right. I did not need the dir_mode and file_mode, and I did have full control enable, but no dice.
However it seems there is a folder aliasing feature, that was introduced in windows vista (though I don't recall the windows name for the feature and I am running win7), I believe to be the problem. For example, if I share and mount C:\Users I have access to C:\Users\myuser and can create folders and documents there. However the predefined folders Music, Documents, Pictures I have no write permission inside of.
Next if I share and mount C:\Users\myuser I have the same result for those folders however now I can see additional folders one is 'My Documents' in this folder I have write access and changes are mapped back to the Documents Folder. Additionally there are now showing in the Documents folder, I had no write access to, additional folders which also weren't showing before 'My Music', 'My Pictures', and 'My Videos' in which I now have write access and they map back as well.
When I connected to the shares from an XP machine I could simply access the original folders.

Reports 6i windows display problem on Windows NT system

Iam using Reports 6i on Windows NT.All the reports 6i windows are became transporent windows, displying problem (repainting problem). I did fresh installation. But iam not able to solve this.

I am using same fonts on all these plateforms.Look more closely at those fonts. They may have the same names, but the Windows 2000 versions may be larger (able to render more characters).

Cisco Prime - Running LMS on a Windows PDC

Greetings,
Due to certain limitations we must run Cisco Prime on a Windows PDC (Primary Domain Controller). This isn't supported, and the install/upgrade won't let you accomplish this, but I think on our Windows 2008 R2 Server Cisco Prime was originally installed on a stand-alone server that was later changed to a PDC. We're running LMS 4.2.3 and it seems to run fine but now we need to upgrade but the installer won't allow it. Has anyone out there come up with a workaround that allows you to run an upgrade on a PDC?
Any clever ideas on how to circumvent this greatly appreciated!
George

I see better what you mean now I didn't associate AD with the windows domain.
Yes I too had a customer where the LMS server down after it was "targeted" by a GPO from a policyserver.
I was good for doing a reinstall of LMS until on of people of their network team found what policy clobbered the server. He could then revert the damage.
Basically the server is best left alone as well as the casuser account.
Actually the prefered situation from cisco is to take the machine out of the domain (standalone).
Cheers,
Michel

[SOLVED] GNOME 3.8 annoying window resize problem

Hello all fellow early-adopters :-)
A very annoying quirk I've noticed, moving from GNOME 3.6 to 3.8, is that it no longer remembers, nor retains, the size/positions I set for many of my application windows. For example, my mail client (Evolution) is sized to fill most of my screen (centrally), with Empathy and Skype as long narrow windows on both sides - giving me a nice, broad "communications" overview on that particular desktop (with dev tools etc open on others).
On 3.6, this layout was retained during my session, as well as next time I started these apps up.
In GNOME 3.8, not only does it insist that these windows are always started as small little bunched-up windows that I need to resize, but every time a window displays a notification/warning (message in internal yellow bar inside the window - such as loss of internet connection, mail retrieval failure etc) it resizes the windows spontaneously to a stupid, small size that overlays the other windows. This is driving me crazy!
Where can I learn a bit more about how window sizing / positioning works in GNOME 3.8, or is it finally time to switch to awesome wm? I want to love GNOME 3.8, I really do. It's so slick, but so... unpolished.
I want to dig in an assist with problems like these, but I need some pointers to some background material first to understand the problem. Is it the window manager? Is it the app?
** UPDATE: Doing a full system upgrade, as of May 18, 2013, has resolved this annoying problem. My windows now stay where they belong, and start with the same size they were closed with. GNOME is now pleasant to use again :-)
Last edited by dawid.loubser (2013-05-21 13:37:25)

dawid.loubser wrote:Thanks for the suggestion drtebi - I'll give it a try.
I really like GNOME 3.x though (and would like to understand the windowing behaviour), but if the annoying quirks are insurmountable, I will happily switch.
Man I love GNOME 3.x. I admire the courage they had to change, basically, everything, and I find myself more productive with my GNOME 3 Arch box than with my good ol' Slackware KDE 4 box. I just hate those bugs - for example I filed a task in their bugtracker for this window resize problem I have with gedit. If it's a love/hate relationship, I think it's marriage ^_^
With the 3.8 upgrade, deadbeef was having a similar problem with window size/position. I just recompiled it against the latest GTK+3 package upgrade (that came after the 'big upgrade' here on Arch) and it was fixed. But not with gedit
bwat47 wrote:
Man I really hope this gets fixed soon, because aside from this one incredibly annoying issue I am loving gnome 3.8.
I get the feeling gnome badly needs more beta testers, sizable regressions like this in "stable" releases happen way too often sad.
I get the exact same feeling. Well bugs exist everywhere, there's no denying. But I think it would be wiser to 'alternate' the nature of each major stable release - one focusing on new features and one focusing on fixing bugs. For example if the only new features in GNOME 3.10 were the AppsFolder full implementation and the introduction of gnome-calendar, and the rest of the development cicle being devoted to fix bugs, I'd be more than happy.
Like Fedora and Ubuntu, the fixed 6-month release cycle colaborates with the bugs. They don't do like Debian or Slackware which are released 'when they are ready'.
EDIT: fout (yet) another bug. At least with facebook chat (haven't tested with other telepathy plugins) the buddy tray icon appear duplicate. Anybody with the same issue?
Last edited by lmello (2013-05-02 14:06:06)

Connecting iPod Nano 8GB video model to Windows 2k problems

Hello!
I hope someone can help, I had a MacBook that died and now I need to move our 4 iPods to the windows 2k environment. When you plug in the iPod it says that it needs to be converted to Windows, not problem, I click "OK" then iTunes starts and gives me the following message:
The iPod "IPOD2" cannot be used because it requires iTunes version 7.6 or later.
Go to www.itunes.com to download the latest version of iTunes.
Ther is NO 7.6 for Windows 2K? Any help could be appreciated.
I have the latest version for W2K, and I have 1 Nano that has syncd fine. Anyone have any ideas, I have searched and tried all the tech docs I could find to no avail. The iPod is visible in "My Computer" but when you click on it it asks if I want to format it, worried about doing that. Can't find any instructions on resetting the iPod back to factory/out of the box WITHOUT ITUNES! that may help!
Thanks,
John

Ther is NO 7.6 for Windows 2K?
I'm afraid not. The last version of iTunes for Windows compatible with Windows 2000 was 7.3.2:
http://www.apple.com/support/downloads/itunes732forwindows2000.html
... and the third generation (video) nanos require at least iTunes 7.4.x (and 7.6 is currently recommended).

Cant Set windows PDC

hi hope some one can help
im now trying to promote my os x 10.4.11 server to a windows PDC, the server has been running for sometime as a directory master with no probs, when i then try and save the PDC setting i just get error while writing settings
from reading other posts i checked the system logs and get
Servermgr_smb:opendirectorypdbconfig error [238]
Servermgr_smb:opendirectorypdbconfig error [-14098]
again back to the forum i followed further advice to
make sure my computer name is less than 16 char
try using root as the username
try using your ldap director admin name and password
so far nothing has worked and still get this error
can anyone please help

What happens wehn you try?
For setting it up on the iPod see:
Parental Control???: Apple Support Communities]
How to Setup Parental Controls on iPhone & iPod Touch | Mobicip Blogs, Discussions & Help
how do i put parental control on my...: Apple Support Communities
parental control: Apple Support Communities
iOS: Understanding Restrictions

Cannot download itunes.....says there is a windows inslaller problem

ttried to update my iphone 4 to ios5.......needed to update itunes....tried came up with windows inslaller .........removed itunes, now cannot install due to same windows inslaller problem, any ideas peeps......its doin my head in!!!!!!

Are you using a 32-bit or 64-bit version of Windows, Jim?
If it's 64-bit (Vista or Windows 7), I'd try the following instructions:
Vista Home Premium (x64) and installing Itunes - SOLUTION

Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: firefox.exe Application Version: 1.9.2.3855 Application Timestamp: 4c48d5ce Hang Signature: 9962

I am having this problem, in the first window when I try to do anything.
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 1.9.2.3855
Application Timestamp: 4c48d5ce
Hang Signature: 9962
Hang Type: 0
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Hang Signature 1: 5df72ce88195c0212c542e9c8c172716
Additional Hang Signature 2: 2b94
Additional Hang Signature 3: 9acafbb8ad01bf9d2eb258d8fddad3ca
Additional Hang Signature 4: 9962
Additional Hang Signature 5: 5df72ce88195c0212c542e9c8c172716
Additional Hang Signature 6: 2b94
Additional Hang Signature 7: 9acafbb8ad01bf9d2eb258d8fddad3ca
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I suspect a RAM or hardware problem.

Windows 7 problem loading CS4ext.

Hi. My problem started when I decided to use Windows 7 Home Premium and Photoshop CS4 Ext, .upgrading from XP Home and CS2. Prior to loading these I reformatted my HDD's etc using an 80GB drive for C:// and repartitioning a 320GB drive to 150GB and 150GB. Windows 7 is on the C: drive, but now I cannot load the Adobe PSCS4 ext. DVD disk. Each time I try it comes up with Access Denied. I am not too well versed in software and wonder if anyone can sulpply a solution.. I know there are some compatibility problems with some older programs. Thanks .

========================================
Message Received: Jan 24 2010, 04:11 PM
From: "rogleale"
To: "Ted Pull"
Cc:
Subject: Windows 7 problem loading CS4ext.
Have you tried opening the DVD in Explorer, navigating to the 'setup.exe' folder, and right clicking on it to run it as administrator?
This might work.
Roger

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1

I have received the following error message with Adobe Acrobat Pro XI when working with Portfolio Files. I am operating Windows 7 Professional.
Has anyone found a fix for this issue?
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: Acrobat.exe
Application Version: 11.0.10.32
Application Timestamp: 547e97af
Hang Signature: 8dc7
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Hang Signature 1: 8dc7ed9d7ff41b8cc5ee35b7294b45e9
Additional Hang Signature 2: e6d0
Additional Hang Signature 3: e6d001594873a6b1363ccd82616a4edf
Additional Hang Signature 4: 8dc7
Additional Hang Signature 5: 8dc7ed9d7ff41b8cc5ee35b7294b45e9
Additional Hang Signature 6: e6d0
Additional Hang Signature 7: e6d001594873a6b1363ccd82616a4edf
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Please help
John Sorkin [email protected]

jamodi
What computer operating system is your Premiere Elements 12 installed?
How far into the opening of the program do you get? Do you get to the Expert or Quick workspaces?
And, if so, how long can you stay there? What are you doing when you get this message, opening a new project
or opening an existing one that has been saved/closed or just trying to launch the program from the desktop icon.
Are you running the program Run As Administrator and from a User Account with Administrative Privileges?
Do you have the McAfee antivirus program? Do you have the latest version of QuickTime installed on your computer
with Premiere Elements 12?
What video card/graphics card does your computer use? Have you verified at the web site of the manufacturer of the
card that the video card/graphics card driver is up to date?
If you do not know, check the Device Manager/Display
Adapters to determine if you have 1 or 2 cards.
Depending on your answers, the next step will be
Uninstall the program the usual Control Panel way.
(If you can get into the program long enough to go to Help Menu/Sign Out, please do that to deactivate the program
before going to the uninstall in Control Panel area.)
Do a run through with ccleaner (both the regular cleaner and registry cleaner parts) to get rid of leftovers from
incomplete uninstalls and reinstalls.
https://www.piriform.com/ccleaner
Reinstall the program with the antivirus and firewalls disabled.
(If you have McAfee as the antivirus, that may be problem, and we can take care of that without having to go
through this uninstall/ccleaner/reinstall.)
Let us start here and then decide what next.
Thank you.
ATR

Does Running Boot Camp Solve Mavericks' Windows-Networking Problems?

Anyone running Mavericks in a Windows-server environment knows how agonizingly slow it is populating a window on the server if there are more than a few dozen files in it (we have 25-30 folders on our Windows server that have more than 10,000 files in each one, and they are all images files with sizes between 5 and 50 MBs each). When we open a folder that's on the server in Mavericks' Finder, it can take up to 30 minutes to populate that window. We have since reverted to Mountain Lion and although it's still slow to populate those windows, it's nowhere near as slow as Mavericks, and once the window populates, as long as we don't shut down the computer, the next time we open that window it populates within seconds (I'm guessing that some sort of cache file is created).
Does anyone know if running Windows in Boot Camp (or Parallels) would speed up the Windows-server window population problem? I'm guessing it might but I'm not sure if the computer is still connecting to the server using the Mac networking protocol. If I use my Windows 7 PC the server windows populate almost instantly.
Any help would be greatly appreciated.
Lloyd

From the Boot Camp System Requirements page: http://support.apple.com/kb/HT5634
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD
Your computer supports Windows 7 32bit with Boot Camp 4.

Detection of windows registry problem

I'm using illustrator 5.1 on PC (win 8.1). Currently the software has prompted with the message issuing the detection of windows registry problem. I can still use it if I choose allowing it to get fixed immediately. But it still prompted every time I open it. What can I do to fix it as I lost the installation disc?

I was finally able to solve this by:
1. copying a Sun/swdp directory from a different computer to this one.
2. tried to uninstall, this failed.
3. reinstalled swdp over this directory, specifying server integration. This failed.
4. reinstalled swdp over this directory, specifying no server integration. This succeeded.
5. uninstall. Delete swdp directory.
6. reinstall fresh.

Samba As Windows PDC problem + AD

Similar Messages

Maybe you are looking for