Samba client doesn't work in Mountain Lion

I have Mac Mini Early 2009 and Lion installed on it. I tried to update it to Mountain Lion. All was well, there's just one problem. Mountain Lion does not want to be connected to the smb-shares. This applies to all smb-shares - both on Windows, and on Linux. The error is displayed: "Can not connect. Consult your system administrator."

Information.
SMB Shares - Mount
SMB Shares - Mount (2)

Similar Messages

I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion

I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
So here's what I done so far:
tried resetting PRAM - No success
Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
Tried re installing mountain lion via download . It froze halfway installing -no success.
Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
Tried booting from safe mode - no success
Tried the command line boot - no success.
Please someone help!

Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running.

Adesso wireless mouse doesn't work in Mountain Lion.

My Bluetooth Adesso iMouse S100 doesn't work in Mountain Lion. It barely moves and constantly halts as if its driver is continuously interrupted. It is unusable. It worked beautifully in Snow Leopard.
I don't believe the problem is in the mouse, but just for completeness the batteries are full strength. The Bluetooth control panel signal strength for the mouse ranges from -50 to -48, which may be low but I'm pretty sure was the same in Snow Leopard.
Has anyone experienced and have a fix for this problem?
Thanks.

A mouse pad solved the problem. The Ikea Lack table I'm using is the source of the problem. Its table top surface is apparently scattering the mouse's laser and not reflecting it back properly. I have not experienced this problem with any other table I've used, wood, Formica, et al.

ZTE mf626 doesn't work in mountain lion

By some reason, the USB Modem ZTE MF626 doesn't work in mountain lion. With Snow Leoppard it worked very well. Please give me some advice to configure of a best way the modem. Thanks.

If it doesn't work get a new modem. Or, contact the manufacturer and have them advise you.

Canon CAPT 355 doesn't work for Mountain Lion

SInce I installed Mountain Lion onto my MacBookPro I can't print to my Canon LBP5050N. I've install CAPT 355 that Canon claims will work for Mountain Lion but it doesn't work. I've tried uninstalling all my older driver and installing CAPT 355 but that doesn't work either.

The ccpd.conf file is still
# Canon Printer Daemon for CUPS Configuration Data
<Path>
# CUPS configuration files Path
# Default /
CUPS_ConfigPath /
# LOG Directory Path
#LogDirectoryPath /var/log/CCPD/
</Path>
# Printer entries
# Mapping each "Printer-Name" to "Printer Device Port".
# The "Printer-Name" has to be identical to the CUPS printer queue name.
# For example, if you prepare a printer named "LBP3200" as a CUPS printer
# queue name, and the printer is connected to the USB port "/dev/usb/lp0",
# you can use the following three lines example just by removing the
# comment symbol "#" of each line.
#<Printer LBP3200>
#DevicePath /dev/usb/lp0
#</Printer>
<Ports>
# Status Monitor API socket port
# Default PORT 59787
UI_Port 59787
</Ports>
# Backend Data API socket port
# Default PORT 59687
PDATA_Port 59687
</Ports>
I've tried putting in
<Printer Canon_LBP5050N>
DevicePath lpd://192.168.1.152
</Printer>
manually but no success in getting the results. I've even tried changing the preference file org.cups.printers to include
<string>cnbma://localhost:59687/</string>
Regards,
Edwin

Does anyone have an email client that is working with Mountain Lion? I'm giving up on Mail after installing Mountain Lion

Hi
I give up. I just cannot see my exchange inbox in Mail after installing Mountain Lion. My mail is not being deleted. Its still in my inbox I just can't see it. I've tried everything suggested on the forums and nothing is working for me.
My productivity has completely stalled and I really need to move to an email client that is going to work seamlessly with Mountain Lion.
Any recommendations?

endobrendo wrote:
I have the same problem. Upgraded to ML, and my Mac Mail suddenly can't communicate with Gmail's SMTP server.
I have been having the SAME problem with ALL my Gmail accounts with Mail.app - It is very annoying, especially when you have clients and other important email to respond to. So you're definitely NOT alone in this department.
Might have to go back to Thunderbird or something until this gets fixed, which is going to really suck because I have 5000+ emails along with all my Email Folders in Mail not too mention the Rules I have had setup for years!
AND with the RSS Feeds NOT working in BOTH Mail and Safari! That was a HUGE MISTAKE and defintely a STEP BACKWARDS on whoever's idea that was for sure!

Four finger swiping between spaces doesn't work in Mountain Lion

I have my magic trackpad settings to include 3 finger dragging which means that activating Mission Control, or swiping between full screen apps and spaces requires 4 fingers. I have a MBP running Mountain Lion and it works fine, but on a MBA connected to a thunderbolt display and using a magic trackpad, it doesn't work. I can 4 finger swipe for Mission Control, but I cannot swipe between full screen apps and spaces using 4 fingers. The only way it will work is to disable the 3 finger drag, and set it to use 3 finger swipes for moving between full screen apps and spaces.
Am I missing something? I don't think so.

I already have that checked. All settings are correct. The weird thing is, that with those settings turned on, four finger swiping reacts like 2 finger swiping, except for engaging Mission Control. So, on a properly working machine, no matter what app is open, four finger swiping left to right will take me between spaces. BUT, on this machine four finger swiping left to right over a browser will make the browser pages go back and forth. I have all the settings set exactly like all my other Macs. It's only this one machine that is using the magic trackpad that is not working correctly.
New batteries are installed, and I have no other issues with the trackpad. It seems like a software bug. This MBA does have FileVault turned on. I'm wondering if that's an issue.

My samsung printer ml 1665 doesn't work with mountain lion

since i've updated, my smansun printer doesn't work anymore, i've tried reinstalled drivers, etc.

Hey majiqlady,
I have a couple of articles here for you that may help you resolve this issue. This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Samsung Printer ML 2010 doesn't work since Mountain Lion

Upgraded to Mountian Lion today and now my Samsung printer (ML 2010) doesn't work. I uninstalled it then added it back and still doesn't work.

Hey majiqlady,
I have a couple of articles here for you that may help you resolve this issue. This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Mobile Datastick HUAWEI E1221 doesn't work with Mountain Lion!

After updating from Snow Leopard to Mountain Lion I have noticed that my mobile datastick doesn't work. The stick is recognized as virtual disc and I can only install the install.pkg. Then happens nothing. No window opens (as before). How can I connect to the internet now? Will there be new drivers for the E1221 or do I have to get another one? And if yes, which is supported by 10.8?
Tom

giantbigmac wrote:
Will there be new drivers for the E1221
Tom
Ask Huawei

Hover event doesn't work on mountain lion

I just upgraded to mountain lion and have one MAJOR issue. Any hover event doesn't work.
This includes the dock animations, hover on context menus, buttons in certain apps (noticable in minecraft a lot, so it affects java), and hot corners don't work either.
Anyone else experience this issue and have it solved?
I tried resetting the PRAM and it fixed it, for like 5 minutes, so not a great fix.

I tore my hair out over the same issue. Based on SaitoLux's suggestion, I decided to try deleting and reinstalling the prefs panel for my Logitech mice (Logitech Control Center).
Success!
If you've got this problem and you have a non-Apple mouse driver installed, try deleting and reinstalling. Can't explain why it worked, but happy it did.

Airport Express doesn't work with Mountain Lion

I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers.
Not only that... but the airport utility doesn't support my airport express.
Time Machine doesn't work either....
I want my snow leopard back!!!
Any insight????

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

Safari doesn't work with Mountain Lion

I have installed OS X Mountain Lion. Now Safari and Apple Store doesn't work anymore. :-( What can I do? I've tried to Install Safari again but the problem is always the same!

Generally this will solve it, you can also try repairing permissions, once in a while it will help as well:
Repair your permissions. Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box. Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen. Wait for it to complete, then see if this fixes the issue.
<edited by host>

Isight doesn't work with mountain lion

Hi, I recently upgrade my Macbook Pro to mountain lion, but, my Isight camera doesn't work. Neither, Photo booth or face time recognize it.
Did I miss something during installation? Does it have solution?
thanks for the help.

Hi, I have probably the same or related problem.
After I made the upgrade to 10.8, the camera (integrated iSight) started making problems.
When I log out or restart, everything works (PhotoBooth, Skype), but after a couple of days running
the integrated iSight can not be accessed any more. Skype and PhotoBooth say "no camera".
About my configuration:
I have a 15" Macbook Pro Mid 2009, 2.53GHz with Nvidia 9400M 256MB RAM.
I hope the coming update 10.8.2 will fix it.
This is the my first time, where after an upgrade something stops working.
I would almost say, this must related to Sleep/Resume because I never shut down my notebook,
except for calibrating the battery.

Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

Hi,
After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
Does anyone have similar experience. Anyway to fix it?
Thanks,
Henrik

Have done some further investigating (to no avail). The TV is displaying in my system Info as follows:
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type: GPU
Bus: Built-In
VRAM (Total): 384 MB
Vendor: Intel (0x8086)
Device ID: 0x0116
Revision ID: 0x0009
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
TOSHIBA-TV:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
But nothing on the screen.
Does anyone know if Apple have banned certain screens????

Samba client doesn't work in Mountain Lion

Similar Messages

Maybe you are looking for