Samba cups and windows 8: printer spools but will not print.

Hello,
I have samba and cups setup. I have been trying to connect to my windows printer. Here is my setup
Arch linux linux-3.12.1-3
samba-4.1.2-1
cups-1.7.0-2
Windows 8.1
no firewalls
Samba config
[global]
security = user
#passdb backend = tdbsam
#username map = /etc/samba/smbusers
workgroup = Bobshouse
encrypt passwords = yes
wins support = yes
log level = 1
max log size = 1000
read only = no
#disable netbios = yes
printing = cups
printcap = cups
[homes]
browsable = no
map archive = yes
[Shared]
browsable = yes
read only = yes
path = /home/bob/Share
for cups some things I have tried are
lpd://hostname/printer
smb://username:password@hostname/printer_name
I can see the printer with smbclient
So the printer spools, but will not print. the paper does not move I just hear the printer. Also when I watch the print queues in windows and linux. Cups shows that it sent the document, but when I watch the windows queue it shows the document, but the size of the document stays at 32 kb out of 1.8 mb and says printing. I hope this makes sense. I am just trying to keep things very simple at this point. I just want to understand what the problem is and build on it.

Please provide the following relevant information so someone can help including:
Printer Model - done
Complete and Detailed Problem Description -
Operating System of computer (including service pack revision) - done
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? –
Power off printer and router. Power on router and wait 3 mins, power on printer. Does it connect to the router now? Do you have a valid IP address?

Similar Messages

Firefox 5 with Fedora 15 prints text, but will not print images from web pages.

I have a Pentium 3 laptop running Fedora 15 and using Firefox 5.0. Firefox will print the text from a website, but will not print the images. It just leaves the spaces blank where the images should be. Print preview shows the same results. I have a AMD desktop and a Pentium 4 laptop running the same software, except that the desktop is running the 64-bit version of Fedora 15 and the second laptop is running the 32-bit version. The desktop prints the text and images without very many problems, but both laptops will print the text, but ''not'' the images.
As a test, I downgraded Firefox from version 5.0 to 4.0.1 on the Pentium 4 laptop and encountered the same problem. So, since I do not print much from either laptop, I had not before seen this problem. The desktop has never seen it.
I figure it may be an about:config problem, but I do not know what the parameter may be that is causing the problem.

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Hp all in one 6480 Will print text but will not print pictues

I can not determine why the printer will not print a picture but will print documents. It comes back paper jam but there is no paper jam.

Nobody? This has to be a simple fix, but I can't figure it out!

C6380 is installed in Windows 7 64-bit but will not print

I recently bought a Pavillion dv-2210ev windows 7 64bit, and would like to wi-fi connect it to my c6380. It works well with my desktop (wirelessly also), and got the Solutions Center installed perfectly on the Pavillion. It scans as requested from the computer.
However, it won't print. I will send a document to the printer (c6300 series), but it doesn't even get to the print queue, and won't print on the tray. No error messages at all. Just silence. Only the pop-up window down right corner of HP saying that print job is starting.
I tried 2-3 reinstalls, tried to create a port myself (locally and then standard IP/TCP as suggested by some people here), even created some rules for the firewall which I found from the Network Diagnostic Program that's on hp.com. I tried the trick with the bidirectional support and it didn't work either.
Any ideas? This c6380 starts to hit my nerves, since it works only with the desktop, and not painlessly all the time.

Try to delete printer in Control Panel and re-add:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Photosmart 6520 e Windows 7 printer says it is connected to network, but will not print.

I've followed all suggestions in troubleshooting both from manual and on line. Shut off firewall, unplugged, plugged waited. Nothing changes. All printouts from the printer say connected, but will not print and computer detection of the printer says cannot be located. Help!!

Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

LaserJet Pro Scans, prints test page but will not print from a file

I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

Welcome to the HP Forums JBottensek,
I see by your post that the printer won't print a PDF document from the one computer.
I can help you with this issue.
I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp deskjet 3510 is online but will not PRINT

my hp deskjet 3510 is connected to wireless. printed "wireless network test results" says no probems found, but under network says "no other networks detected matching my SSID". But WILL NOT PRINT NOTHING. HELP PLEASE ASAP

Hi @kc-s
I can help! What operating system, and version do you have? Mac or Windows?
While I wait to hear from your, please use the following document and let me know the outcome; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My 6310 All in One will print a test page but will not print from Publisher, Notepad, etc. WTH?

My HP 6310 will print a test page fine, but will not print from Publisher, Notepad, etc. It goes thru the motions, but the image printed is almost not there. I have new ink cartridges in it. I have adjusted the print settings. STILL won't print properly. WTH???

Hm, okay, thanks for getting back to me again!
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and test print again.
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I seem to have lost my connection to the printer. Printer copies so is operating but will not print

The printer is on and working as in making copies but will not print from computer. I am using wireless option.

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

1. verify on another Mac first. and another port.
2. very likely dead SATA card
read about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

TS1398 my ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wif

My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.

- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

HT201210 tried updating my iphone 4 to ios6, stopped and completely shut my phone down tells me that i have to plug into itunes and restore to factory settings but will not let me do this????

tried updating to ios 6 on iphone 4 has completely shut my phone off tells me i have to plug into itunes and restore to factory settings but will not let me do this?? need help???

Interceptor94 wrote:
What should I do short of restoring my phone to factory settings?
Nothing. The message means you MUST restore your phone to factory settings. There's no way around this . Your phone is in recovery mode. That's the only way to get it out.

Samba cups and windows 8: printer spools but will not print.

Similar Messages

Maybe you are looking for