Same ALE logical system for multiple BP

Hello,
we are using two processes to deal with the messages we receive from an external partner.
For our system this partner is a logical system.
My problem is now that we cannot give the same name to to processes.
Do you have an idea how to solve it?
Greets,
Helge

Hi,
I now tried a bit with your input and the result is that I know gave the adapter specific identifier to one process (A) and in the receiver agreement I used a header mapping with A as the sender.
I dunno why but now its working. Whatever the difference with the external partner my be ...
Greets,
helge

Similar Messages

ALE logical systems for business service or process

Hi,
I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
"Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
How can I handle this problem?
Should I hard code values somewhere?
Which ones?
I have read the other posts for the error above, but my situation seems to be different.
Help!
Chris

Hi,
To solve your problem, here my solution:
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Mickael.

ERROR"Unable to convert sender service to an ALE logical system,(Urgent)

Hi All when i am not giving the sender service address in the Receiver Aggrement i am getting this perticular error .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
==========================================
And if i am giving this one then i am not getting any such error rather i am getting another error "Unable to convert sender service to an ALE logical system" for this also i have checked the LS system name in the Adapter specific Identifier and the logical name are exactly same. But still i am getting this error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
=============================================
Still i am getting this error can anyone please let me know what to do now..??
Please treat this as urgent

Hi,
This error is caused when Sender System name does not match the logical system name of partner. As you mentioned you have done all the steps to ensure that, here's a checklist that could be helpful:
1. Check adapter specific parameters for sender system.
2. Maintain header mapping in receiver agreement and ensure that sender service name provided is same as business partner name required in R3 and business partner type is LS.
3. This may sound very basic, but ensure that checkbox for 'Apply control record from payload' is not checked and if it is then the values passed through payload are appropriate.
Hope this would be helpful.
Thanks,
Bhavish

How to create Logical System for ALE?

Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.

Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi.

Define one logical system for PI or multiple LS for 3rd-party system?

Hi gurus,
We are using IDOC2SOAP and SOAP2IDOC scenario in PI7.11. My question is regarding the logical system(or partner profile) on R3 side. We have two 3rd party system:A and B, so we have two choices.
1. define one single logical system for PI integration server;
2. define two logical systems for A and B.
For choice 1, it seems we can only use one business sytem or business component (business service in 7.0) as the two 3rd party system, especially for SOAP2IDOC scenario.
For choice 2, it seems we have no restrictions.
Is it correct?Any help will be appreciated.

technically you can use both options.
The question is - do you want all the IDOCs in your R3 system to appear as though they were sent from the PI?
What if a lot of 3rd party systems were sending the same IDOC (for example - ORDERS) and you want to investigate only those who were sent from system A?
I like it configured that every system will be identified by a name I give it.
I just use the IDOC communication channel checkbox of "Take Sender from Payload"
or use a different service in the IBC that has a different logical system configured in its Adapter specific identifiers.
Hope it helps,
Imanuel Rahamim.

Logical systems for ALE

HI all,
I'm configuring for an IDoc to be generated and downloaded to a file via a file port.
This IDoc is of message type PAYEXT.
The file is to be sent ot the bank via the meansa of third party software.
Do I have to create logical systems for these? Or only the outbound logical system?
Do I also need to set up the distribution model , and if so, how far do i need to set it up?
Points wil be awarded. Thanks!

Hi
Use BD64 Tcode to setup distribution Model
Define the 2 logical systems.
see the flow:
Outbound:
Step 1. Application document is created when transaction is saved.
         2. Message control is invoked.
         3. Messages are processed by system.
         4. Messages are Edited (if desired).
         5. Output (ALE / EDI) is checked
         6. Validate against Message control record from Partner Profile
         7. Application Document is saved.
         8. Entry NAST table is created for every selected output program
              along with Medium & Timing.
         9. Check for Process Immediately .
                 If (yes)
                   Determine Processing Program from TNAPR Table.
                 ELSE
                   Execute RSNASTED Program.
       10. Read Partner Profile to determine Process Code.
       11. Process Code points to the Function Module & Invoked.
       12. IDoc is generated.
       13. Check for ALE Request.
                    if (Yes)
                        Perform Filters, Conversions, Version Changes etc.
                    Else.
                        IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
        2.   Subsystem calls Functional Module                                 EDI_DATA_INCOMING from startRFC program.
         3. Data in Control Record is validate against the Partner                       Profile.
        4. IDoc is generated in Database and syntax check is                      carried out.
        5. IDoc file is deleted once file read.
        6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
                   7. Check for Process Immediately.
               If NO
                 Execute RBDAPP01 Program
               Else
                  Read Process Code from Partner Profile
                       Process Code Points to Function Module
                 Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Reward points if useful
Regards
Anji

Internal order - Error - Different logical system for order

Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
David

I have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"?

Unable to convert the sender service to an ALE logical system

Hello,
file adapter > XI 3.0 > Idoc adapter > r/3 system
In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI > idoc scenario to this same r/3 system (using same sld business system)
I read other topics on this error but it seems they all talk about an IDOC outbound interface.
What should I check?
Thanks
Boaz

I do have the same problem as Boaz Paz
When I try :
file adapter > XI 3.0 > Idoc adapter > r/3 system
> This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
I get an error while XI tries to call its IDoc Adapter:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>AwayOrders</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
With the following trace logs :
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = AVTItalie</Trace>
<Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
2. declare "AVTItalia" as a business partner in SLD with the logical system name
Plz help!

Receiver service ??? cannot be converted into an ALE logical system

Hi,
I am hoping for some help with an Idoc issue in XI version 3.0. The scenario is like this:
Flat file->File adapter->XI->Idoc adapter->R/3
I have configured a scenario in one system like this that works fine. But in the current system I am getting the error message "Receiver service ??? cannot be converted into an ALE logical system" from the Idoc adapter.
As it is XI 3.0, I have set the Agency and Scheme in the destination communication channel to <Service>, ALE#LS and in the destination party, I have created a alternative identifier <Service>, ALE#LS, SYSCLNT200.
I have configured an ALE logical system name in the SLD.
I have cleared the SLD cache in the integration builder.
The ALE logical system name was not in the SLD when the message first appeared, but I thought clearing the cache would fix that. I have not tried deleting the service and re creating it. That is my next step....if all else fails.
Not sure what else I haven't tried.
Can anyone offer any advice?

Thanks Sam Raju for the reply.
On your questions:
1. I checked IDX1 - port for the receiving R/3 is defined as SAPIR1_300 (port: SAPIR1 and Client: 300) and it is mapped to RFC destination of IR1300.
2. Checked RFC destination IR1300 - it is setup as R/3 connection and checked test connection and remote login and both are working fine
3. Checked IDX5 - did find one message (status is successful) corresponding to the file I am sending into R/3 and this entry is an Outbound entry.
Question: Should there be two entries here in IDX5 - one for inbound and the other for outbound?
May be I am doing something wrong here in setting up the interface mapping and endpoints. Anyway when I check the IDOCOutbound in the Soap Header, I see the following:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/exchange/MessageFormat/">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCNUM>0000000000008002</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>FLIGHT_SAVEREPLICA01</SAP:IDOCTYP>
<SAP:MESTYP>FLIGHT_SAVEREPLICA</SAP:MESTYP>
<SAP:SNDPOR>SAPBXI</SAP:SNDPOR>
<SAP:SNDPRN>PRISM</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:RCVPOR>SAPIR1</SAP:RCVPOR>
<SAP:RCVPRN>IR1CLNT300</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
</SAP:IDocOutbound>
Do you see anything wrong or missing here. SNDPOR is XI port, SNDPRN is the source partner (file) and RCV... information is all the receiving R/3.
I am suspecting that something is missing either here or in the endpoint setup.
Also, in the TechnicalRouting I have this:
- <SAP:address version="20">
<SAP:systemKey>IR1CLNT300</SAP:systemKey>
<SAP:endpointType>IDOC</SAP:endpointType>
<SAP:url>IDOC://SAPIR1?RFCDEST=IR1300&DOCREL=&VERSION=3&SAPREL=46C</SAP:url>
</SAP:address>
Any issues you see here in url?
Also, when I look on the XI server, I do not see these files deposited anywhere- so they are going somewhere (as the status in IDX5 is successful)!
Do I need to activate any queues or triggers anywhere.
Can you please offer advice and help us out.
Thanks again.
Srini
[email protected]

Unable to convert the sender service BS_PARTNER to an ALE logical system..!

Hi All,
File to IDoc scenario.
1. Business system is correct because its working for other scenarios.
2. I checked Adapter Specific attributes in Business service and given Partner number which in maintained in WE20 for the partner in R/3.
3. Refreshed cache.
But still... its showing the below error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BS_PARTNER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service BS_PARTNER to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea what might be wrong?
Regards
Deepthi.

Hi Experts,
Could you please help me to fix this.
SCENARIO: SAP - IDOC -
> XI -
> SOAP Adapter (Webservice)
Workaround:
1. Verified Adapter Specific configurations and its fine with same Logical system in SLD and ALE service.
2. Header mapping in Receiver com channel : Sender service and Receiver Service is assigned
3. Identifier Tab in comm channel details: Its empty - no values.
SXMB_MONI :
Error Details:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>CAPTOR3_PRU</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service X12345X to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks in Advance,
Sunil.

SOAP to IDOC: Unable to convert sender service BS to an ALE logical system

Hello everyone,
I have this scenario where i receive web services calls and have to integrate the received xml messages (idocs) into SAP R3 system.
I allready reveive the message in my XI engine, but i'm getting this error (being BS the name of my Business Service included in my external party):
"Unable to convert sender service BS to an ALE logical system"
I allready tried everything that is specified in this blog:
The specified item was not found.
Probably it doesn' fit my requirements. I'm not sure...
Can anyone help ?
Thank you in advance for any help
Nuno

- do u have the same logical name defined in the BS and in the Adapter specific attributes.
also check if u have defined the logical system (SALE ) with the same name.

Unable to convert sender service(BPM) to an ALE logical system

Hi All,
I am working on simple File to File Scenario where XI picks the File and process thru BPM and sends the file to R/3 Application server and wait for SYSTAT STATUS IDoc for the acknowledgement from R/3 System.
My scenario is working fine by receiving the STATUS IDoc and closing the BPM instance.
But later I am getting System error message as below:
Unable to convert sender service (BPM) to an ALE logical system
Any clues in this case?
Thanks in Advance.
Regards
Sudha.

Hi Rajesh,
1. I am receiving the file into BPM and after validation Iu2019m splitting the file into multiple files.
2. Each split file sent to R/3 Application Server(by activating the correlation with the filename)
3. BPM will wait for SYSTAT STATUS IDoc (by using correlation with the filename) from R/3 System
    for acknowledgement purpose. After receiving the respective STATUS IDoc (with the filename) then
    BPM will close the instance.
4. If the STATUS IDoc not received with in specified duration an alert will raise and close the BPM
    instance.
   So we are not sending the STATUS IDoc data to Sender system.
Regards
Sudha.

Once again: Unable to convert sender service to an ALE logical system

Hi,
I know there's a lot of threads regarding that error but I didn't find one that fits to our current scenario:
IDoc -> XI -> File
We have checked if the logical system name in SALE (of sending system) fits to the one in the business system and it does now.
It didn't fit at first but we've changed it in the SLD and reimported the business system.
We still get the same message:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
There is no logical system entered in the receiver business system. Do we need that? But of which logical system?
Thanks for any advice
Karsten

Hi,
Acknowledgments
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender.( Ex : Idoc----File). Here by default Idoc has the inbuilt feature of requesting the Ack.
Acknowledgments are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments.
Sender adapters of the Adapter Engine do not request any acknowledgments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Regards
Seshagiri

Problem converting Integration Process to ALE logical system(acknowledgmen)

Hello,
I have a scenario where a sender SAP system sends an IDoc via an Interface Mapping to an Integration Process.
This worked perfectly fine on our development environment, but after transporting the scenario to our quality systems I got the following acknowledgement error:
Unable to convert the sender service <i>name of integration process</i> to an ALE logical system.
What could be the reason for this? We have a logical system on the sender SAP system set up for the XI system itself but not for the Integration Process.
We also use SYSTAT IDocs and there we set the the logical sender system name to the logical system for SAP XI and not for the integration process.
Is this also necessary for acknowledgements? Where could this be done. Strange thing is that it works perfectly fine on our development environment.

I raised the same question a few months back.Answer to this question is in the same thread.
Idoc Acknowledgements - Logical System Name
You will have to select option "Restore Original Parties for Idoc Acknowledgments " in the Acknowledgment Idoc adapter.
Regards
Bhavesh

Logical system for business service!!!!!!!!!

Hi all,
I send a file from filesystem to XI which inturn converted to IDOC and posted to SAP system. Filesystem i've added as a business system(which has a logical system in R/3).
now i've added the filesystem as a business service(assinged to a party). So if send the file i'm getting the error as "Unable to convert sender service to an ALE logical system".
How can i resolve this problem?
can we assign the business service a logical system name ?(as business system)
What could be the procedure for processing this kind of b2b scenario where we dont have information about systems or sevices in SLD?
Thanks in advance for your replies........
Santhosh.

Hi just check this Bolg for Help
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Ques.3
Or refer to this link
<b>/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
if u want to learn more bout
How to configure Idoc adapters
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
reward if helpful
Regards
Sachin Dhingra
Message was edited by: Sachin Dhingra

Same ALE logical system for multiple BP

Similar Messages

Maybe you are looking for