SAME all Form Elemets on a Screen.

Guys,
I have a complex form. the elements ara all mapped to attributes of a complex object. Is there a way of SAVING everything on the click of a button. I am trying to avoid saving values from each form element back to the attribute for each of this form elements.
-Thanks

I am trying to implement the save functionality .
Lets say a user opens a BPM screen with 100 elements and fills out 50 elements on the screen and leave out the rest 50. The user then decided to do the rest next day. He clicks on the Save button , Submit button will complete the teak but save will push the task back into the queue. Next day the user opens the form again and he has to work on the rest 50 only.
Hope I am able to explain this.

Similar Messages

Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow which point to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing

Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?

This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

Video and audio not sync when i play all forms of video. from music videos, to tv shows. but they play perfect on my iPod. and tv shows display out of order on iPod, but in correct order on iTunes/computer. I even ran a virus check just to make sure.

audio and video do not syncronize. all forms of videos. music videos to tv shows. what do i need to do the syncronize them again
they are in sync on iPod, but not on computer.
another issue that might be from the same cause is, the order of episodes of the tv shows i have downloaded, they appear in order on computer, but on iPod they show out of order.
any tips on how to fix this would very much help.
thank you.

Welcome to Apple Discussions!
An old version of iTunes will cause this and mess up the videos on your iPod. Always make sure you always use an up-to-date version of iTunes.
Make sure all the software on your computer is up to date...
iTunes
iPod Updater
Updating iPod's Software
You will then need to restore the iPod and then let iTunes update your iPod and put your music, videos, etc. back onto your iPod...
Restore the iPod
btabz

How to compile all forms in a directoy at time?

Hi friends, thank for your replies for the previous questions.
Now
How to compile all form modules located in a directory
at a time? usually what I know is opening form one by one
and compile it. But I want to compile all forms and create
executable files at a time.
Is project Builder helpfule to achive this??
thanks
madhu

Yes, his file is useful -- it should run on Windows XP. You need to copy the above text into a file using a standard text editor, something like Notepad. To run it, you open a Cmd.exe DOS window on your pc, change directory (CD) to the folder where your forms are, and enter the command script file name.
Here are several more links to other topics in this forum asking how to do the same thing:
Re: How To Compile 370 forms ?
Re: Creating Oracle 10g Forms and Reports Builds

I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings If yu can see the screen enough to do it)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
Apple Retail Store - Genius Bar

I have an InfoPath with submit button, publish the same to form library.

Hi All,
i have an InfoPath with submit button, publish the same to form library.
Now, i open the form fill it and attach some files, when i press submit button, that attachments will go to the particular document library.
Can any one help me out.
Thanks in Advance!

Hi Anil,
According to your description, my understanding is that the attachments attached to the form were submitted to an documents library.
By default, the attachments should be attached with the InfoPath form and will not be submitted anywhere.
There may be some customizations on the form that is to submit the attachments to the document library.
Please check the links below if the customizations are made in the form.
http://www.bizsupportonline.net/blog/2010/01/upload-document-sharepoint-infopath-form/
http://www.bizsupportonline.net/blog/2010/04/top-10-questions-infopath-file-attachments/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

HT201269 one fine day, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost conta

one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

XYGraph: export minimized data set for same plot form

hello all
we are loading about 50'000 data points into a XY Graph.
Assuming that the graph is 1'000 pixel wide and the line width of the plot is in minimum 1 pixel, we see about every 50th value when looking at the whole horizontal range of the data set.
that's fine.
now we would like to export the data into a further processing where only the visual aspect of the plot is important.
if we use the initial data set of 50'000 values it needs much time. and most of the data is not important (not visible) because there are stucked, hidden behind the 1'000 visible data points.
so we look for a way to use only the most important values, the 1000 points which are shown as own pixels in the forground. like the plot itself when exporting it to a bitmap for example.
filtering out every 50th point does not seem a good way because the original form of the plot can be tampered. we assumed it at least and think that is not the way Labview handles the graph visualisation.
Does anyone know how Labview builds and optimize the graph build up or how a minimized data set with the same plot form can be made out of the whole set?
thanks for any help
best, mischl

Hi,
the algorithm how Labview builds and optimize the graph is not published. Attached you find an example how you can minimize data for export. A typical usage in application is therefore finding peaks, which could be filtered out by the actual graph visualizaiton.
Dont heasitate to ask again if you have any new quesitons concerning the subject.
Best Regards, Fabian

I recently updated my new iphone 4 from ios6 to ios7. All of a sudden, my screen crashed and is now in a flashing white state with lines. I've reset the settings multiple times and the flickering has not disappeared. Please help

I recently updated my new iphone 4 from ios6 to the current ios7. It has been in use for a few days now and all of a sudden the screen crashed to a white display with lines. I have reset it a couple times but there has been no improvement in reducing the screen flicker. Please help

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

Extracting all form fields from a fillable pdf

Is there any way of extracting/exporting/copying all form fields from a pdf? Meaning, the wordings from all the fields so I can pass it along to another individual to use for cross referencing, since they are not able to see all the various form fields within the split screen?
Thanks!!!

The person that needs this is looking for the entire running list of all the fillable field names within the pdf. Any kind of document that I can deliver them in, I am willing to take suggestions.
Right now, what I was thinking of doing was having the screen split between the pdf and the listing of field names in the sidebar and taking screen captures as I scroll down the pdf and corresponding field names in the sidebar until I got all pages.
Is there an email address I could contact you at to discuss offline? I have an example I could send you but don't want posted online.
Thanks!

HT3215 How do you keep the clock face showing all the time without the screen going dark?

How do you keep the clock face showing all the time without the screen going dark?

Thanks. I saw a number of answers to the same basic question after I posted my question and apparently there are ways to to keep it on but, as you said, it will drain the battery quickly.

I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared I have an IPhone 5. Has this happened to anyone before?

I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared I have an IPhone 5. Has this happened to anyone before?

That is very strange! Have you been able to get your apps icons back now? Have you attempted a soft reset by holding the power button and home button at the same time until the phone restarts? Keep me posted with the results!
BryanS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

TS3274 All of a sudden my screen is not rotating. Did I accidentally hit something I shouldn't have?

All of a sudden my screen is not rotating. Did I accidentally hit something I shouldn't have?

Look and see if there is a lock icon in the upper right corner of the iPad screen. If the icon is there, that indicates that you locked the screen orientation.
There are wo ways to unlock the screen - depending on how you have the settings configured on your iPad.
Check the side switch above the volume rocker on the side of the IPad. Flip the switch. If the lock icon goes away, the screen is unlocked and you had the iPad set to use the side switch for screen orientation.
The other place to look is in the task bar. Double tap the home button and swipe to the right at the bottom of the screen. Look all the way to the left. If there is a lock icon there, tap that to unlock the screen. Then tap the screen above the task bar to get back to the home screen.
IF ... There was no lock icon in the upper right corner of the screen, reboot the iPad and see if that unlocks the orientation.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
The article that Alan referenced above, explains how to use the side switch as the screen lock - or the way to mute system sounds. It is well worth a look.

HT1212 I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.What should i do ? Somebod

I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.And also ipad goes into same disabled postion.What should i do ? Somebody help please.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some users have reported as many as 8 or 9 attempts were necessary before success.
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

SAME all Form Elemets on a Screen.

Similar Messages

Maybe you are looking for