Same Batch with different expiry dates

Dear all,
My vendor produced the same batch Y28 at an interval of 3 days eg 10/10/2008 , 11/10/2008, 12/10/2008 with an expiry date of 1year.
He sent in the batch Y28 to me with the following expiry date 10/10/2009, 11/10/2009 and 12/10/2009.
During GR, I need to enter the expiry date. However, I realised that the Batch Master for the same batch can only have 1 expiry date. I end up with the latest expiry date of 12/10/2009.
Could anyone advise on how the above scenario sould be handled?
Can I maintain 3 different expiry date for the same batch?
Is it a norm that the same batch can have different expiry date?
Thank you

You should create a separate batch per day, if you really think that the exact date of expiry matters for a material that has a shelf life of one year.

Similar Messages

  • Combined delivery with different delivery dates:

    Combined delivery with different delivery dates:
    We are experiencing a problem when doing combined delivery from multiple orders of the same ship to party.
    All the requirements are being met (for the order combination) accept the Delivery dates.
    Sometimes an order Qty is confirmed on the 1at of a month , then the second order qty is confirmed on the 15th of the month.  But when we want to make the combined delivery , the delivery dates differ and the user has to go into the individual order ans changes the dates.
    Is there a way to make the combination, the system not taking in account the delivery dates? Because we have huge no. of orders to combine. Please guide.
    Regards,
    Mansur.

    Dear Mansur,
    I think there is no any solution exaclty map with your problem in standard SAP.
    Better you control based on the MRP type, not sure. And also check with availability check and tranfer of requirments.
    Thnx,
    Pratik

  • HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me

    Please I need help regarding this problem I faced today.
    I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me?

    Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
    Errors related to downgrading iOS
    The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

  • In the packing list, batch number and expiry date is not appearing for a ma

    Dear Friends,
    I have an issue in the packinglist.
    In the packing list, batch number and expiry date is not appearing for a material.
    But in the delivery the batch number and expiry date is appearing.
    Why this has triggered and how to solve this?
    With regards

    Hi Vamsi,
              Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
    Regard's
    Murali.

  • Combine stock transfer orders with different delivery dates into 1 delivery

    Hello,
    In transaction VL10B, the system normally combines stock transfer orders that have the same ship-to-party and same delivery date (if the combination indicator in the customer master specific to sales and distribution is checked). My business requirement is to combine stock transfer orders that have the same ship-to-party but different delivery dates. Is this possible through standard configuration? Is there a user exit that can allow this?
    At the moment the system is creating different outbound deliveries according to the delivery dates specified in the stock transfer orders.
    Please advice a solution.
    Regards,
    Felipe

    Felipe, please have a look at OSS note 386340, it may help to solve your problem about combining STO items with different delivery dates to one delivery (as I understand the code correction overwrites the delivery dates...).
    Edited by: Csaba Szommer on Jan 21, 2011 5:06 PM

  • HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
    You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
    Then resync with your iPhone and all will be well.

  • How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
    (74502)

  • Why can't two different users use Itunes on the same computer with different log ins

    Why can't two different users use Itunes on the same computer with different log ins

    Pmorgan5672 wrote:
    Why can't two different users use Itunes on the same computer with different log ins
    They can, but not at the same time.
    If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message.  If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
    If you are asking the technical reason why, it is something about context switching.

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • Can you have 2 ipods on the same accounts with different play list?

    Can I have 2 ipods on the same accounts with different plalists?

    Sure.  Each iPod is identified in iTunes with its own name and you configure each one as you wish:

  • Merge of two same items with different Qty in po

    Hi Experts,
    Is it possible to merge two Same items with different Quantity into 1.
    For Eg:- 2 similar  items  with qty 2 & 3 must show 5 qty appearing once.Is it possible through Transnotification what should be the query.
    Mona

    Hi Mona,
    If you want to display a Purchase Order on screen summarized by item, set the "Summary Type"  to "By Item" (by default it is "No Summary"). The PO lines will then be summarized by item with total quantity for each item.
    If you want to display it on the printout then you need to modify the PLD. It is quite easy actually. You can use the Repetitive Area Footer to display the summary of each item and set all fields in the Repetitive Area to be not visible and set the height to minimum height.
    Cheers,
    Marini

  • Same sqlID with different  execution plan  and  Elapsed Time (s), Executions time

    Hello All,
    The AWR reports for two days  with same sqlID with different  execution plan  and  Elapsed Time (s), Executions time please help me to find out what is  reason for this change.
    Please find the below detail 17th  day my process are very slow as compare to 18th
    17th Oct                                                                                                          18th Oct
    221,808,602
    21
    2tc2d3u52rppt
    213,170,100
    72,495,618
    9c8wqzz7kyf37
    209,239,059
    71,477,888
    9c8wqzz7kyf37
    139,331,777
    1
    7b0kzmf0pfpzn
    144,813,295
    1
    0cqc3bxxd1yqy
    102,045,818
    1
    8vp1ap3af0ma5
    128,892,787
    16,673,829
    84cqfur5na6fg
    89,485,065
    1
    5kk8nd3uzkw13
    127,467,250
    16,642,939
    1uz87xssm312g
    67,520,695
    8,058,820
    a9n705a9gfb71
    104,490,582
    12,443,376
    a9n705a9gfb71
    62,627,205
    1
    ctwjy8cs6vng2
    101,677,382
    15,147,771
    3p8q3q0scmr2k
    57,965,892
    268,353
    akp7vwtyfmuas
    98,000,414
    1
    0ybdwg85v9v6m
    57,519,802
    53
    1kn9bv63xvjtc
    87,293,909
    1
    5kk8nd3uzkw13
    52,690,398
    0
    9btkg0axsk114
    77,786,274
    74
    1kn9bv63xvjtc
    34,767,882
    1,003
    bdgma0tn8ajz9
    Not only queries are different but also the number of blocks read by top 10 queries are much higher on 17th than 18th.
    The other big difference is the average read time on two days
    Tablespace IO Stats
    17th Oct
    Tablespace
    Reads
    Av Reads/s
    Av Rd(ms)
    Av Blks/Rd
    Writes
    Av Writes/s
    Buffer Waits
    Av Buf Wt(ms)
    INDUS_TRN_DATA01
    947,766
    59
    4.24
    4.86
    185,084
    11
    2,887
    6.42
    UNDOTBS2
    517,609
    32
    4.27
    1.00
    112,070
    7
    108
    11.85
    INDUS_MST_DATA01
    288,994
    18
    8.63
    8.38
    52,541
    3
    23,490
    7.45
    INDUS_TRN_INDX01
    223,581
    14
    11.50
    2.03
    59,882
    4
    533
    4.26
    TEMP
    198,936
    12
    2.77
    17.88
    11,179
    1
    732
    2.13
    INDUS_LOG_DATA01
    45,838
    3
    4.81
    14.36
    348
    0
    1
    0.00
    INDUS_TMP_DATA01
    44,020
    3
    4.41
    16.55
    244
    0
    1,587
    4.79
    SYSAUX
    19,373
    1
    19.81
    1.05
    14,489
    1
    0
    0.00
    INDUS_LOG_INDX01
    17,559
    1
    4.75
    1.96
    2,837
    0
    2
    0.00
    SYSTEM
    7,881
    0
    12.15
    1.04
    1,361
    0
    109
    7.71
    INDUS_TMP_INDX01
    1,873
    0
    11.48
    13.62
    231
    0
    0
    0.00
    INDUS_MST_INDX01
    256
    0
    13.09
    1.04
    194
    0
    2
    10.00
    UNDOTBS1
    70
    0
    1.86
    1.00
    60
    0
    0
    0.00
    STG_DATA01
    63
    0
    1.27
    1.00
    60
    0
    0
    0.00
    USERS
    63
    0
    0.32
    1.00
    60
    0
    0
    0.00
    INDUS_LOB_DATA01
    62
    0
    0.32
    1.00
    60
    0
    0
    0.00
    TS_AUDIT
    62
    0
    0.48
    1.00
    60
    0
    0
    0.00
    18th Oct
    Tablespace
    Reads
    Av Reads/s
    Av Rd(ms)
    Av Blks/Rd
    Writes
    Av Writes/s
    Buffer Waits
    Av Buf Wt(ms)
    INDUS_TRN_DATA01
    980,283
    91
    1.40
    4.74

    The AWR reports for two days  with same sqlID with different  execution plan  and  Elapsed Time (s), Executions time please help me to find out what is  reason for this change.
    Please find the below detail 17th  day my process are very slow as compare to 18th
    You wrote with different  execution plan, I  think, you saw plans. It is very difficult, you get old plan.
    I think Execution plans is not changed in  different days, if you not added index  or ...
    What say ADDM report about this script?
    As you know, It is normally, different Elapsed Time for same statement in different  day.
    It is depend your database workload.
    It think you must use SQL Access and SQl Tuning advisor for this script.
    You can get solution for slow running problem.
    Regards
    Mahir M. Quluzade

  • Same  Material with different itemcatagory groups

    We have 3rd party manufacturers that make product for company and sometimes they send the finished product back to company and other times they will drop ship it to one of our customers.
    this scenario we need to have the same material with different itemcatagory groups
    i tried to create same material with different storage locations, but it's possible but the thing is when i change the item catagory group for the material , the same is applicable for 2nd same material, my requirement is i need 2 different itemcatagory for the same material,  hope u understand my requirement
    i will be expecting your possible replys.
    Thanks & Regards
    Venkat.Dhanemkula

    Hi Venkat..
    Please explain it more clear manner..
    With whatever i have understand, i think you scenerio is manual 3rd party order processing.
    In that case the material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing.
    Keep only one material and specify the item category group NORM in the material master.
    If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
    hope it helps you.
    Regards
    Harry

  • Standard PO with different delivery dates

    Hai All,
    Pls. clafiry my below query.
    e.g. my PR Qty may be 30 PC (in one line item)
    I want to create the PO in one line item with different delivery dates.
    Like: 10 PC 15.12.2008
            10 PC 20.12.2008
            10 PC 25.12.2008
    Rams

    Hi,
    In ME22N, on "Delivery Schedule" tab you can set manually on which dates the shipments should come.
    If you want to have the right date for the PO item, you should carry out your settings accordingly to get proper results after MRP run. However, you cannot set MRP (as per my best knowledge) to create several Delivery date for one PR - MRP will create a separate PR for each different date.
    Regards,
    Csaba

  • Batch shelf life expiry date at Plant level

    Hi All,
                We have a requirement from the client to maintain Batch shelf life at plant level.
    Current process: Batch shelf life expiry date is maintained at the global level.
    Requirement: Shelf life data to be maintained at Global level and plant level both.We want flexibility to maintain shelf life both at Global level and plant level .
    If any one has worked in this scenario then kindly throw some light to resolve this issue.And also let me know if we move ahead to maintain shelf life data at  global n plant level then which all the area it will get effected in other stream reagrding shelf life best before date.
    This is very critical requirement from client prospective as we have legacy system involved like LIMS & COREDB.
    Your valuable input will be highly appreciated.
    Thanks n Regards,
    Vikas Soni.

    Hi Vikas,
    A doubt out of your query,
    How the expiry date is maintained Globally .
    Whenever a GR is done then the expiry date will be tagged to the particulat batch & the expiry date is valid for the batch in the particulat plant. Am I right?
    Thanks & regards
    Mahesh

Maybe you are looking for