Same color for different calendars

Prior to upgrading to ios4.0, there was a different color for my exchange calendar (red) and my Mobile me calendar (blue). Since the upgrade they are both the same color (blue). Is there a way to change the color so that they are different?

There many posts on this subject already. Your only option is to remove the calendars using the Mail, Contacts, Calendars settings page and then add them back in a different order.
Apple have decided that the calendars adopt preset colours in a preset order

Similar Messages

How to create a running total formula for different calendar years

Hello everyone,
I am looking for some help in creating a running total formula for different calendar years in Oracle. This is what I currently have organized in the crosstab report: vertically I have the cities from our database organized, then horizontially have the following information for each city:
2006 /2007 /2008
Amount /Amount Spent /Unspent Amount Amount Recieved/Amount Spent /Unspent Amount Amount Recieved/Amount Spent/Unspent Amount
Recieved
I am trying to create a formula that will specify each calendar year. For example, I'd like to have a formula in 2007 which would total the: 2007= {2006 unspent amount + the unspent amount in 2007} and same for 2008= {2007 unspent amount + the unspent amount in 2008}. I hope this is clear, I have simplified the report into a basic interpretation of what i've been trying to accomplish.
Would anybody know if this is possible and how to approach this?
Really appreciate it! Thanks.
Alex

Hi,
you can try and define a running total as a calculation in the crosstab as:
sum(Unspent Amount) over (partition by city order by year)
i find the crosstab format comfusing sometime since the aggregation is auto applied.
I would start with a flat table and then "duplicate is as a cross tab"
for your running total you can sort the data by the city,year and get it to 3 lines for each city, for example:
city year Unspent Amount all other amount...
X 2007 10
X 2008 20
X 2009 30
Y 2007 5
Y 2008 15
Y 2009 25
then you can use a funtion to calculate the amount :
sum(Unspent Amount) over (partition by city order by year)
this is the sql i used just to check it:
SELECT city,year,"Unspent Amount"
,SUM("Unspent Amount") over (PARTITION BY city ORDER BY YEAR)
FROM (
SELECT 'X' city, 2007 YEAR, 10 "Unspent Amount" FROM dual UNION ALL
SELECT 'X', 2008 ,20 FROM dual UNION ALL
SELECT 'X', 2009 , 30 FROM dual UNION ALL
SELECT 'Y', 2007 , 5 FROM dual UNION ALL
SELECT 'Y', 2008 , 15 FROM dual UNION ALL
SELECT 'Y', 2009 , 25 FROM dual
Tamir

Same colors display differently between Illustrator and Photoshop

Hi there,
I would love to know why the same colors display differently between my Photoshop and Illustrator apps (CS3). For example, a logo will display much darker or more vividly in Illustrator than in Photoshop, same file, same colour values. My color settings are synchronized from Adobe Bridge to North American Pre Press 2. I've opened the logo file in RGB color mode, in both apps. It would be so helpful if both apps displayed the colours consistently.
Any suggestions on how to do this would be wonderful!
Thanks!
Bobbie

Hello Bobbie,
I am using CS3 too and let me tell you that this Illustrator version is the worst ever. You best bet is to take the "Eye Drop" tool and select the Photoshop element to match the color.
CS4 also have problems when handle placed items. Sadly I can tell you that CS2 is more reliable than CS3 and CS4.
Not even if you use Pantone colors will match, Illustrator will change the colors making it impossible to match. "Adobe Quality"

SAP XI 3.0 Same source for different target in std Value mapping function

Hi,
We have replicated 4 value mapping entries from R3 to XI having the same Context , Agency , Schema and value for source, but each of the 4 values has the same Context and Agency but different Schema and Value respectively.
To illusstate :
Source                             |Target
Context Agency Schema    Value -----Context Agency   Schema     Value
CS1      AS1      SS1      1        CT1       AT1      ST1       A
CS1      AS1      SS1      1        CT1       AT1      ST2       A
CS1      AS1      SS1      1        CT1       AT1      ST3       B
This value mapping is not working and we always get the source value as the result.
We are wondering if the reason for this is that we use the same source for different targets. But we are not 100 % sure of it.
When I read the documentation on Value mapping or when we use the value mapping standard function in graphical mapping, we pass the context , agency and schema of the source and target respectively and the source value to get the target value, and this combination is always unique in our case as seen in the above example.
Has anyone faced this kind of an issue, if yes I would appreciate if anyone could help us resolve this problem.
Thanks in advance.
regards,
Advait

Hi Advait,
From the below what I understand is that you are not able to do value mapping for the follwoing
1     A
2     A
3     B
As value mapping allow one to one mapping only. Please do it like as mentioned below
1     1*A
2     2*A
3     3*B
Then in the graphical mapping of Integration Repository do the mapping for the same as shown below
source field > VALUEMAPPING> UDF--> TARGET Field
In UDF suppress the value of 1* , 2* , 3* which can be done as follows
create one UDF with one input field
//write the code as below to suppress the field
return input.substring(2);
Here the davantage of using 1* , 2* , 3* etc is that you have the option to use value mapping for 100 values which I think is not normally the case for any Interface.
If you have same source you can do the same thing for that.
Hope this helps you to resolve your query.
Thanks & Regards
Prabhat

TS4337 Why are the colors for my calendar reseting to a color I never chose?

Why are the colors for my calendar in iCal reseting to a color I never chose? It won't stay blue when I choose that color and keeps changing to a custom lavendar color on its own.... Incredibly annoying...

There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel

Is there a way to have multiple color Guides so I can have different colors for different layers

Is there a way to have multiple color Guides in Illustrator and Photoshop CC so I can have different colors for different layers?

I think it's not possible "natively" to have this functionalty but I found these topics for Photoshop :
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4618
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4617
On this one, you will see a workflow which are well described.
http://graphicdesign.stackexchange.com/questions/6030/how-to-set-different-color-to-guides ai-ps-id-fw
I've not tested them but you should give it a try!

PPOME - Can't insert the SAME task for different organization unit

Hi all,
I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
The question: is there any way to insert the <b>SAME</b> task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
Thanks all
Paolo

Hi Naveen
thank you for your prompt reply.
The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
Thank you
Paolo

Same logo printing different colors for different file formats?

I created a logo for a client who will be using it for some printed materials. I provided the logo in 3 different file formats: EPS, JPEG and Tiff.
In INDesign and MS Word, the logo is printing a different color for the EPS vs the Jpeg/Tiff file types. Is there something I'm missing?
I've even tried changing the color to something completely different and we are getting the same result. There is STiLL a considerable difference between the Eps file and the other two files.

No the logo was created for print and I originally had used a pantone color but converted to CMYK. The actual value is C69 M7 Y0 K0. When my client inserts the eps file into her InDesign layout, it prints a bright aqua color and if she uses either the jpeg or tiff, it is a much different blue. We've tried other colors because I was thinking it might just be the fact that it's a blue color... but the same thing happens to other colors. I am wondering if there is some sort of color management setting that is causing the eps to be different?

Same colors appearing different in the same document

I have a document where I have filled different table cells with the same RGB color. However, they sometimes appear as two different shades, one darker than the other. I checked to be sure it was the same RGB color and it was, but it appears quite different both in InDesign and when I export it to pdf. Any idea why the same color is appearing differently in the same document?

It doesn't appear to be a monitor problem, as the colors are different both on my laptop screen and on my external monitor. As I do not have the ability to print a hard copy before the file gets sent to the printer to make a proof, I need to know which is the "right" color (or at least the once closest to how it will print). Even if the colors are showing up differently on screen, if the swatch for both is exactly the same, will it show up as the same color once the actual hard copy is printed?

Split line/tone Pantone swatches of same color look different

QUESTION: In Illustrator I need to split a Pantone color into two different swatches (line and tone). When I duplicate the swatch and rename it with an "L" in front, the color looks different (with overprint preview)! Same CMYK values – I checked. I know it has something to do with how the swatch is named, because if I rename both swatches I don't have this problem. What's going on and how can I fix this?

John Danek wrote:
Not sure, but I would not recommend renaming Pantone Spot color swatches. What's the point? I mean, why would you mess with the names?
I think they wants to use one swatch for certain parts of elements like the stroke and and perhaps the other for fills but of different and not necessarily common paths.
Changing the name make it easier for them to know which is applied to the other. There coud be a reason to keep them separate and to have the names be different to make the work flow effiecient.
I think the reason is that since they are now two different swatches it treats it as two different inks one from the book and the other from a CMYK mix.
It simply does not recognize the second swatch as a book color which would have to be a second plate with the same ink.
You cannot rename a book color.
So unless you were planning to hit the piece with two plates with the same spot color what you want to do is not possible.
I can see where you want this but I see no way of fixing it except a feature request.
Perhaps placing the same swatch in two different color groups?

Color of different calendars

Hy everybody,
I have different Exchange Account (3) connected to my iPhone.
Therefore, i have different calendar available where i can write my appointements into.
My iPhone set the colors red, purple and blue.
I would like to make it more clear/visible by setting the colors red, yellow and green.
Where can i adjust these settings?
Kind regards

I must assume that the calendars respectively the mailboxes are attached to outlook as my option is only 1 calendar.
In my case i just attached the mailboxes to my iPhone.
It is strange to me that there isn't a configuration i can do on the mobile device.
I will look further .... but thanks for your super fast answer...
Cheers

Doing the same task for different data.. Do I need Queues? How to use them if yes?

Hello all,
I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
2) As you people are experts so I really like any suggestion to improve the VI..
3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
I will really appreciate is someone can either provide me the relevant example or can give me some idea.
The main VI is the 'TASK START'.VI please find the attached files.
Thanks
Regards,
Naqqash
Naqqash
Attachments:
Project.zip ‏151 KB

Hi Peter,
Thank you very much for your reply. I have understood your idea but there are few problems.
Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants) and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
hope guys here in the forum will help me as you guys always did.
Naqqash
Attachments:
Final test.vi ‏11 KB
Enum FTP Events.vi ‏14 KB

How to assign the same GTIN for different material?

Hi,
I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
Now we need to assign the same GTIN to different material numbers.
Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
So, here is the question again:
How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
Any advice is appreciated,
thanks,
Marco.

1. the GTIN is generated
This should be "external" number range only.
2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
Unable to understand that why you need same GTIN in two different articles?
Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

Can you change rollover text in the same slice for different triggers?

Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development. My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss. I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side. I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over. Can this be done?
I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers. I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

Yes, you can trigger different slice contents on rollover from multiple other slices.
It's easier to show than describe, so here is a sample file that does what I think you're looking for:
(1) six buttons
(2) each button has unique text
(3) each button has a rollover state
(4) unique text is displayed in the same place for each button on rollover
Hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:

How to set the color scale so that we can get same color for same intensity of color in various runs

Hi
I am trying to get the color pattern of mashed potato trays and diferent trays has different color intensity but if IF i am chsooing rainbow plateu it's giveing red color for dark region of each tray but two tray has different intensity of dark color. Can you suugest me how should I set the color scale so that I can distinguish which tray has higher degree of intensity of darkness.
I will be obliged to get the suggestions

Hello,
Thank you for contacting National Instruments. I just have a few questions for you to help us clarify your application:
What API, such as LabVIEW or C, are you programming your application in?
Are you using Vision, and if so what specific functions are you currently using?
Is the lighting consistent and just the color of the trays changing?
How are you displaying the image in your program? Are you using an Image Display control?/li>
Depending on what functions you have available, then we may be able to work on finding a way to distinguish between the different intensities. If you could provide a little information to your application based on these questions then will be able to better understand and help you with your app
lication.
Regards,
Michael
Applications Engineer
National Instruments

Same color for different calendars

Similar Messages

Maybe you are looking for