Same coverlfow for different play lists on iphone.

Hey guys. So I have two different playlists on my iphone. I called one iphone and the other one iphoneAltRock. Everything synced well and I see the songs in each playlist correctly but when I rotate the iphone to show coverflow in iphoneAltRock it shows every album I have on my phone not just the ones in that playlist. Is this a bug or something? it would be nice to have coverflow just show the artists in that playlist.
Thanks for the help.
-m

Not a bug, just the way it's supposed to work.
Coverflow is just another way of viewing your library, not the playlist you are playing. It's similar to if you switched to library view in iTunes -- you don't see only the songs in a certain playlist in that view, but all your music.

Similar Messages

Can you have 2 ipods on the same accounts with different play list?

Can I have 2 ipods on the same accounts with different plalists?

Sure. Each iPod is identified in iTunes with its own name and you configure each one as you wish:

SAP XI 3.0 Same source for different target in std Value mapping function

Hi,
We have replicated 4 value mapping entries from R3 to XI having the same Context , Agency , Schema and value for source, but each of the 4 values has the same Context and Agency but different Schema and Value respectively.
To illusstate :
Source                             |Target
Context Agency Schema    Value -----Context Agency   Schema     Value
CS1      AS1      SS1      1        CT1       AT1      ST1       A
CS1      AS1      SS1      1        CT1       AT1      ST2       A
CS1      AS1      SS1      1        CT1       AT1      ST3       B
This value mapping is not working and we always get the source value as the result.
We are wondering if the reason for this is that we use the same source for different targets. But we are not 100 % sure of it.
When I read the documentation on Value mapping or when we use the value mapping standard function in graphical mapping, we pass the context , agency and schema of the source and target respectively and the source value to get the target value, and this combination is always unique in our case as seen in the above example.
Has anyone faced this kind of an issue, if yes I would appreciate if anyone could help us resolve this problem.
Thanks in advance.
regards,
Advait

Hi Advait,
From the below what I understand is that you are not able to do value mapping for the follwoing
1     A
2     A
3     B
As value mapping allow one to one mapping only. Please do it like as mentioned below
1     1*A
2     2*A
3     3*B
Then in the graphical mapping of Integration Repository do the mapping for the same as shown below
source field > VALUEMAPPING> UDF--> TARGET Field
In UDF suppress the value of 1* , 2* , 3* which can be done as follows
create one UDF with one input field
//write the code as below to suppress the field
return input.substring(2);
Here the davantage of using 1* , 2* , 3* etc is that you have the option to use value mapping for 100 values which I think is not normally the case for any Interface.
If you have same source you can do the same thing for that.
Hope this helps you to resolve your query.
Thanks & Regards
Prabhat

PPOME - Can't insert the SAME task for different organization unit

Hi all,
I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
The question: is there any way to insert the <b>SAME</b> task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
Thanks all
Paolo

Hi Naveen
thank you for your prompt reply.
The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
Thank you
Paolo

Scrambled "Top 25 Most Played" list on iPhone, but fine on iTunes

Hi everyone
I’ve got a (relatively) minor but annoying anomaly with my playlist “Top 25 Most Played”
This playlist isn’t downloaded to my iPhone properly, in fact it's utter garbage, and in no way resembles the content in the list in iTunes, there are songs on my “Top 25 Most Played” on my iPhone that I haven’t listened to for ages and certainly are absolutely nowhere near the top play count in a library of over 2,000 songs.
I've tried all the recommend things to fix it, reset, hard reset, restore from backup, restore to factory settings, deleting all music and adding one playlist at a time, nothing has worked!
To make it all the more annoying it appears on my iPod Touch perfectly fine.
I've never had a problem with an Apple update before (user for 6 years or so), but I feel I must type this one up, as the iPhone is now my most used portable music device!
Does anyone else suffer the same? An upgrade to iTunes 9.1 does not seem to have fixed the problem.
Thanks in anticipation.

See this: http://support.apple.com/kb/TS3044.

I have used the same laptop for all three of my iPhones but awhile back this laptop had a virus so my husband wiped it out and now when I sync my iPhone I no longer get my entire music library ( including purchased songs) on my iPhone. How do I fix this?

I have always used the same laptop for all of my iPhones but awhile back this laptop had a virus so my husband wiped out the laptop and now when I sync my iPhone I no longer receive my entire music library (including purchased songs) on my iPhone. How do I fix this?

kimberlyfromtopeka wrote:
Ok,thanks but, I should be able to something so that I am able to sync the entire library again not just the purchased songs.
If the non purchased music is not on your computer, how can it Sync to your iPhone...

Doing the same task for different data.. Do I need Queues? How to use them if yes?

Hello all,
I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
2) As you people are experts so I really like any suggestion to improve the VI..
3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
I will really appreciate is someone can either provide me the relevant example or can give me some idea.
The main VI is the 'TASK START'.VI please find the attached files.
Thanks
Regards,
Naqqash
Naqqash
Attachments:
Project.zip ‏151 KB

Hi Peter,
Thank you very much for your reply. I have understood your idea but there are few problems.
Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants) and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
hope guys here in the forum will help me as you guys always did.
Naqqash
Attachments:
Final test.vi ‏11 KB
Enum FTP Events.vi ‏14 KB

How to assign the same GTIN for different material?

Hi,
I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
Now we need to assign the same GTIN to different material numbers.
Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
So, here is the question again:
How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
Any advice is appreciated,
thanks,
Marco.

1. the GTIN is generated
This should be "external" number range only.
2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
Unable to understand that why you need same GTIN in two different articles?
Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

Can you change rollover text in the same slice for different triggers?

Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development. My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss. I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side. I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over. Can this be done?
I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers. I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

Yes, you can trigger different slice contents on rollover from multiple other slices.
It's easier to show than describe, so here is a sample file that does what I think you're looking for:
(1) six buttons
(2) each button has unique text
(3) each button has a rollover state
(4) unique text is displayed in the same place for each button on rollover
Hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:

Same Contact for different customers

I have same contacts (all details same) for different customer accounts (ex: Customer A, B, C etc). I have to duplicate contatcs in XD* or VAP* transactions.
Is there a standard simple way to avaoid creating duplicate contact entries? Create contact (without attaching to customer) seperately and assign to different customers?
Please help.

Hi,
If you want to assign as contact person sales employee responsible for contacts wit hthe customer, you shoudl rather use parther function PE and assign the employee number in the partner functions of the customer. Otherwise the requirement to assign the same contact person to several different customers is completely not clear for me (several companies rather do not employ the same people).
Regards,
Marcin

Same BI for different dev envir

Dear All,
We have two development environment groups in our organization, both needs to be worked independently in our implementation work for ECC industrial modules.
we are planning to implement the netweaver systems such as BI, EP for both development systems.
Question here is, can we use same BI system for different ECC development environments?
or do we need to separately create two BI systems and integrate with respective ECC 6.0 modules.
Thanks and Regardsa

Hi,
Yes, you can connect 2 different development systems from same BI system. You need to create 2 different source systems in RSA1 in BI.
Thanks
Sunny

Using same Context for different phy. environments

Hi,
i have a small question regarding contexts in ODI. Hope someone can help me.
Following situation:
We have 3 databases with same db object structure on three different servers and want to integrate them into one target structure.
Step1: Initialize target structure (truncate table etc.)
Step2: Load data from first Database
Step3: Load data from second Database
Step4: Load data from third Database
We want to use the same interface for all of them in order to keep it simple and avoiding duplicate interfaces. So i think we need something like a context/server change during execution. Is this possible to use the same interface for serveral environments and how?
thx, for your help
best regards,
Kai

Hi Kai,
Please, take a look into the post http://odiexperts.com/?p=652 maybe it can help you a little....
And the answer to you questio is YES. That is one of the context functions.
Just create one context to each database and execute the same interface, but at each context...
Does it help you?
Cezar Santos
http://odiexperts.com

ITunes removes podcast playing list from iPhone

This is a truly odd behaviour IMO - adds salt to injury in light of iPhone placing order of podcast oddly (http://discussions.apple.com/thread.jspa?threadID=2552626&tstart=0)
1. Create a play list consisting of podcasts on the iPhone. Everything works nicely on the iPhone until
2. Sync with iTunes.
Boom! Your podcast list is now in iTunes but disappears from iPhone!

Kudos to iTunes 10.1 or/and iOS 4.2! The bug is now fixed, with extra bonus - and a new bug.
Before the update, another frustration was that I couldn't add any episode from iTunes U to a playlist. (Not sure if this is possible in iTunes.) Now, not only iTunes is no longer removing playlist with podcasts, but it now allows iTunes U to be included.
In fact, not only it allows both podcast and iTunes U, iTunes 10.1 even recovered all the contents it rejected in the past, and restored my test playlist to include everything I attempted to include that is still on the iPhone.
The only problem is: I could no longer maintain any edit I made on iPhone. As the restored list became so big, I cleared the list, added the few items I wanted. But as soon as I resync, the long, unwieldy list comes back!

HashCode method return same value for different string?

Hello. I am finding hashCode method of string return same hashcode for many different string? It seem when string is long we get same value many times? What is solution? I am useing JDK 1.0.2. Thank you.

Hello. I am finding hashCode method of string return
same hashcode for many different string? There are about 4 billion possible hashcode values.
How many possible strings do you think there are?
Obviously many strings will have the same hashcode.
What is
solution?The solution is to not depend on hashcodes being unique.

Can you install iTunes twice on same computer for different accounts?

Can you install itunes twice on a mac for different accounts?

There are a couple of ways you can do this, have a look at this guide: "How to use multiple iPods with one computer" http://docs.info.apple.com/article.html?artnum=300432

Same coverlfow for different play lists on iphone.

Similar Messages

Maybe you are looking for