Same curve twice

I am trying to draw a simple dialog box. How can I achieve exactly the same curve twice with smooth points (the red arrows point to the bit I am talking about).
Any help would be much appreciated
Elliot

I have done this a number of times and i do not know if it is just my way or if I got this from someone.
http://mysite.verizon.net/wzphoto/Curves.mov
You don't of course have to show the center just adding the anchor point with the command will put it in the center. I just wanted to show that you are getting a center just in case someone comes around who is unsure.

Similar Messages

  • How do I use the same photo twice in a slideshow created in iPhoto'11?

    I created a slideshow in iPhoto'11 and would like to use the first slide also as the last slide.
    How can I use the same photo twice?

    Seems you have to duplicate the photo in your Library to add the same picture twice.

  • How can I retrieve the same figure twice in report?

    Hi guys,
    If we have the same selection twice in the same report, it only retrieves the figure once (see example below, were the same period has been chosen twice). Is there any setting I can adjust, so it will retrieve the figures for double-selected members also?
    Thanks,
    Dorthe

    Hi Dorthe,
    No issues in my system (BW 7.3, BPC SP12, EPM SP16 patch1):
    B.R. Vadim

  • HT204053 my wife and i have seperate itunes accounts is there a way we can link our accounts to share songs so we dont have to pay for the same song twice?

    When the first ipad came out i set it up and created an itunes account, since then she got an iphone and an ipad and everything was good. I had an android but wanted to try out the iphone. When i set it up ut jumpled all of our contacts, apps, and everythin. it was a mess.
         Since, i purchased and ipad 2 and an iphone and to keep our stuff from combing i used a different computer and created an new apple ID for myself so our info wouldnt combine, I was wondering if i did the right thing or if i should have went about it a different way. I was going to see if there was a way when she purchased a song i could get it. I dont want to pay for the same song twice and only want to share songs. If i cant do this can i copy her library and paste it into my itunes??
    Any help wouldl be greatly apprecieated we both have icloud set up but i cant figure out the best solution.

    Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
    A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
    Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
    Also, I'm not a lawyer so don't take this as legal advice.

  • I keep getting calls from non existing area codes and phone numbers.  They are never the same number twice.  How do I stop this?

    About a week ago I started getting phone calls on my cell phone from numbers that do not exist, including the area codes.  I can not report these to the Do Not Call list because the area code is non existent.  I'm getting these calls all the time now and never from the same number twice so there's no point in blocking them.  If I answer I may or may not get a person who has an accent from India so heavy that I can't understand what they are saying.  This is getting to the point where I just want to cry I'm so frustrated.  Anyone else having this issue or does anyone know how to stop it?
    Thank you

    I'm sorry that you are having all these troubles. I have sent you a private message.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Can I use the same SSI twice in same page?

    Hey all,
    i'm having a problem whereby several SSI's are not showing on my page.
    I'm wondering if it's because the instances that are not showing are the ones called the second time round.
    Before i start posting code etc, i just wondered if it was actually not possible to call the same SSi more than one time on a page.
    I can't seem to find documentation stating this anywhere.
    Thanks in advance,
    Katrina
    Edit 1: I tested using a new unique SSI (i.e. one that wasn't called anywhere else on teh page, and it doesn't show either... so I've started a new thread where i post my code here: http://forums.adobe.com/message/5345250#5345250
    Edit 2: I guess i didn't test properly initially. It seems it is NOT possible to use the same SSI twice on a page...   What a bummer!!!

    This issue was resolved in a different thread where s member supplied the following information...
    t's certainly possible depending on the PHP command which you use as the include directive.
    <?php require_once('includes/include-address.php'); ?> will only include the file once
    <?php require('includes/include-address.php'); ?>  will include the file more than once
    <?php include('includes/include-address.php'); ?>  will include the file more than once
    Each has its own rules and quirks.
    http://php.net/manual/en/function.require-once.php
    http://www.php.net/manual/en/function.include.php
    http://www.w3schools.com/php/php_includes.asp

  • How to restrict the entry of same material twice on the order

    HI,
    How to restrict the entry of same material twice on the order before saving the Order ?
    I do not want my users to enter the same material as two different line items in the order.
    Any inputs wud b appreciated

    Hi Vam,
    For this you need to take the help of an ABAPer . Ask him to modify the user exit and add the logic.
    For user exit please go through the below link it will help you to resolve your issue.
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    Regards,
    Krishna O
    Edited by: Krishna O on Jun 3, 2010 12:29 PM

  • End user receving same mail , twice in a day .

    Hi,
    Throu this report , i am sending mail to a user. I the scheuld this program as background job.
    But My problem is end user receving same mail twice a day.I am sure , Program is executed onces in day.
    Plz help me to solve the problem
    REPORT  zplm008_tdr_mail_alert        .
    *DATA DECLARATION.
    DATA: it_ztdr TYPE TABLE OF ztdr WITH HEADER LINE.
    DATA  wa_maktx TYPE makt-maktx..
    *SELECTION SCREEN
    PARAMETER: p_date TYPE sy-datum DEFAULT sy-datum MODIF ID dat .
    *START-OF-SELECTION
    START-OF-SELECTION.
      SELECT * FROM  ztdr INTO TABLE it_ztdr
             WHERE  rlddt  = p_date.
      IF it_ztdr[] IS NOT INITIAL.
        LOOP AT it_ztdr.
          PERFORM send_mail.
        ENDLOOP.
      ENDIF.
    *&      Form  SEND_MAIL
          text
    -->  p1        text
    <--  p2        text
    FORM send_mail .
      DATA: lt_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                       WITH HEADER LINE.
      DATA:   ls_message TYPE char255.
      DATA: lt_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            lt_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            lt_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            lt_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            gf_cnt TYPE i,
            gf_sent_all(1) TYPE c,
            gs_doc_data LIKE sodocchgi1,
            gf_error TYPE sy-subrc.
          Adds text to email text table
      lt_message = 'Hi,'.
      APPEND lt_message.CLEAR lt_message.APPEND lt_message.
      lt_message = 'Requested design is released. Pls raise the TPR (If required to be ordered).'.
      APPEND lt_message.CLEAR: lt_message.APPEND lt_message.
      lt_message = 'Details of the released design:'. APPEND lt_message.
      lt_message = '*******************************'.APPEND lt_message.CLEAR: lt_message.APPEND lt_message.
      MOVE : 'TDR No '  TO lt_message.
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-tdrid   .APPEND lt_message.
      MOVE  : 'PED Part no '  TO lt_message.
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-matnr.
      APPEND lt_message.
      CLEAR: wa_maktx.
      SELECT SINGLE maktx FROM makt INTO  wa_maktx WHERE matnr = it_ztdr-matnr.
      MOVE 'PED Part Description' TO lt_message.
      lt_message+21(1) = ':'.
      lt_message+22(40) = wa_maktx   .APPEND lt_message.
      MOVE : 'PED Part Rev no' TO lt_message .
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-matnr_rv .APPEND lt_message.
      MOVE: 'Rnd part No  ' TO lt_message .
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-ref_matnr . APPEND lt_message.
      MOVE : 'Rnd Part Rev '  TO lt_message .
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-ref_matnr_rv .APPEND lt_message.
      CLEAR: lt_message.
      APPEND lt_message.
      APPEND lt_message.
      lt_message = 'To View the Design:'.
      APPEND lt_message.
      lt_message = '*******************'.APPEND lt_message.
      CLEAR: lt_message.
      APPEND lt_message.
      lt_message ='For Standard gauge, use Transaction: ZPED_TOOLPRINT'.
      APPEND lt_message.
      lt_message ='For Non-Standard gauge, use Transaction:  ZCV04N or CV04N'.
      APPEND lt_message.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    Fill the document data.
      gs_doc_data-doc_size = 1.
      DATA subject TYPE string.
      CONCATENATE 'Design Released for'  it_ztdr-tdrid  'of'  it_ztdr-ref_matnr
            INTO subject SEPARATED BY space.
    Populate the subject/generic message attributes
      gs_doc_data-obj_langu = sy-langu.
      gs_doc_data-obj_name  = 'TDREQ'.
      gs_doc_data-obj_descr = subject .
      gs_doc_data-sensitivty = 'O'.
    Describe the body of the message
      CLEAR lt_packing_list.
      REFRESH lt_packing_list.
      lt_packing_list-transf_bin = space.
      lt_packing_list-head_start = 1.
      lt_packing_list-head_num = 0.
      lt_packing_list-body_start = 1.
      DESCRIBE TABLE lt_message LINES lt_packing_list-body_num.
      lt_packing_list-doc_type = 'RAW'.
      APPEND lt_packing_list.
      CLEAR lt_receivers.
      REFRESH lt_receivers.
    Add the recipients email address
    For SAP mail
    IF NOT GSCR_UNAME IS INITIAL.
      lt_receivers-receiver = it_ztdr-reqnm.
      lt_receivers-rec_type = 'U'.
      APPEND lt_receivers.
    ENDIF.
    For external mail
    IF NOT gs_outtab-reqnm IS INITIAL.
       lt_receivers-receiver = gs_outtab-reqnm.
       lt_receivers-rec_type = 'U'.
       APPEND lt_receivers.
    ENDIF.
    Call the FM to post the message to SAPMAIL
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = gs_doc_data
          put_in_outbox              = 'X'
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = gf_sent_all
        TABLES
          packing_list               = lt_packing_list
          contents_txt               = lt_message
          receivers                  = lt_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    Store function module return code
      gf_error = sy-subrc.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Get lt_receivers return code
      LOOP AT lt_receivers.
      ENDLOOP.
      PERFORM initiate_mail_execute_program.
        CLEAR:lt_message[] , lt_message , gs_doc_data ,gf_sent_all,lt_packing_list[]
        ,lt_packing_list ,lt_receivers[], lt_receivers.
    ENDFORM.                    " SEND_MAIL
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          text
    -->  p1        text
    <--  p2        text
    FORM initiate_mail_execute_program .
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM

    Hi,
    In your code
    You are looping the perform in which you are calling below FM.
    LOOP AT it_ztdr.
       PERFORM send_mail.
    ENDLOOP.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = gs_doc_data
    put_in_outbox = 'X'
    commit_work = 'X'
    IMPORTING
    sent_to_all = gf_sent_all
    TABLES
    packing_list = lt_packing_list
    contents_txt = lt_message
    receivers = lt_receivers
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    So keep your FM after the loop.
    Pls. reward if useful...

  • Sender File Adapter picking the same file twice

    We are facing a weird issue with File Sender Adapter
    We are using PI File Adapter ( NFS ) to read files for a NFS folder and
    processing those in PI.Normally it works fine. But for a scenario we
    are noticing it sometimes process the same file twice before archiving,
    thus duplicating the financial postings.
    What we have is :
    File Sender Adapter - NFS, Polling interval 60 secs, and Processign
    mdoe Archive. File name includes Wildcards - JE_Upload*.txt
    what we are noticing is that :
    when it picks up a file, it immediately polls again to check for
    another file, and sometimes the file is not yet archived so it picks up
    and reprocess the same file.
    If you see the message below, both belong to the same file, and it
    picked up the same file again in 12 secs after processing it the first
    time
       Successful 02.11.2009 15:01:00 02.11.2009 15:01:01   APMANUAL     urn:bl:i2g:003:100
    SI_SKF_FIDOC_OB XI Message
       Successful 02.11.2009 15:00:49 02.11.2009 15:00:50   APMANUAL     urn:bl:i2g:003:100
    SI_SKF_FIDOC_OB XI Message
    Anyone seen this behavior before?

    Hi,
    Please check the script which creates file in source NFS Folders. There is possibility that script is making change in file when PI is picking up the file.
    When PI picks the file first time it creates one message ID in system. After that if script is making any change in file without file name change (This need not necessary data change), for PI it becomes new file and new message gets generated in PI for same file.
    This error normally comes when File adapter is not able to archive file succesfully. For eg. file with same name alredy exists in Archive folder.
    File adapter generates the new message id whenfile get modified(eg.change in its length or data change) even though
    the file name is same and when file get change ,XI file adapter thinks that its new file and hence generate the new message id for same file.
    If file has same name and notmodified then XI adapter will not generate new message id and will keep on throw the error till you remove that file with same name from the
    archieve directory.
    -Warm Regards,
    Gouri

  • How to print same layout twice changing only one field dynamically

    I have a report which prints three pages invoice in Dollar currency, I want that same report to print those three pages again but the currency will be changed dynamically based on certain criteria. It means I three pages for Dollar and next three pages for other currency.
    Or if you can help me printing the same report twice(do not want # of copies to be set to 2).
    Please it's urgent.
    Thanks
    Kailash.

    Hi
    Distribution.
    and the pass different currency in distribution.
    Regards
    chaluve

  • Double contacts as "iPhone"...my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact

    my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact

    My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
    Can anyone shed some light on this problem or is it only her and this poster?
    2m42s

  • Use same table twice in subform

    Hi,
    i´ve created a form like this
    subformA   -> positioned
    --subformB -> flowed
    table
    header
    body row
    Everything is working fine and a I´m able to see the expected data.
    But when my table includes more than 10 rows it destroys the layout of my page.
    My idea:
    Create a second subform with same table data and place it right beside it. And using FormCalc to show data from row 11 to end.
    But only the first subform is filled. There is no data in second subform (FormCalc code is not implemented).
    It seems, that I can´t use same tabele twice.
    Any ideas?
    Regards
    Andy

    Hi Andy,
    Have both the subforms as flowed and page breaked, it should work.
    As per as having 2 tables techically i believe its not possible.reason behind.
    When you do data binding for 1st table and say multiple rows, at runtime data is iterated and displayed in the 1st table.
    when it reaches to the 2nd table the pointer on the table data source is already eof i.e., last record so it will not display it again.
    to acheive this on form load of the 2nd table you need to initialize and iterate through the data source again.
    I have never tested this scenario but read it in some adobe fourms.
    Check it and let me know, if its still not working i can design a sample form with this scenario for you.
    Cheers,
    Sai

  • My iphones contact list in whats app is showing same contacts twice how to solve this problem

    my iphones contact list in whats app is showing same contacts twice how to solve this problem

    APPLE says:If the previous owner is not present
    Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
    Sign in to their iCloud account at www.icloud.com/find.
    Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
    Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
    When the erase is complete, click "Remove from Account" to remove the device from the account.
    After the device has been erased and removed from the account, you can proceed with the device setup process.
    i forgot to erase the phone.i just removed it without erasing.

  • Query result shows the same data twice

    Hello All,
    I've created UDFs like Supplier Name, Supplier Address, and (Excise Details like)Supplier ECC No,
    Supplier Range.
    And I've created Query for Supplier Name and Supplier Address, and I assigned to FMS, Its working Correctly.
    I've created Query for Supplier ECC No. the Query is,
    SELECT  T0.[ECCNo],T1.[CardName]
    FROM CRD7 T0  INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    WHERE T0.[ECCNo]  Like  '[%]'
    I saved the Query, and assigned to FMS.
    At this stage (i.e. Query for Supplier ECC No.) the above Query showing the same data twice.
    Please suggest to rectify the problem.
    Thanks,
    Pratheeviraj

    You can get rid of the duplicates by changing the query to
    SELECT DISTINCT T0.ECCNo,T1.CardName
    FROM CRD7 T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    WHERE T0.ECCNo Like '[%]'
    But it is always worth understanding why you are getting multiple records to check that you are getting back what you want.  I think you may be seeing this because CRD7 can have multiple records for a business partner - maybe one for each of 'pay-to' and 'ship-to' address?

  • Workflow sends the same email twice

    I created in Sharepoint Designer a workflow to send an email when a new item is created, but i recieve the same mail twice at the same time. Can somebody help me?
    workflow:
    email Lukas Kuypers
    then add 30 days to today (save in variable datum)
    then pause to variable datum
    then delete current item
    then stop workflow

    Hi,
    Per my understanding, a custom SharePoint Designer workflow send an email twice when there is only one send email action in it.
    A possible reason is that the workflow has been triggered twice. Sometimes, due to the performance issue of the SharePoint Server, even after a workflow instance is
    finished, the item submitting is still during processing which triggers another workflow instance and send the second email again.
    As a workaround, you can add one step at the end of your workflow to pause the workflow for a few minutes for a test.
    A link about the similar issue with explanation in details for your reference:
    https://sharepointnomad.wordpress.com/tag/duplicate-notifications/
    Feel free to reply if there is any progress.
    Thanks 
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for