Same Disc error? (When they are separate internal drives)
Mac G5 with (2) internal drives
HD #1 - Macintosh HD
HD #2 - G5 Backup
Mac OS 10.5.8
I want to backup the Macintosh HD onto the G5 Backup but I'm getting the following error:
http://powermixx.com/atemp_dir/timemachine/error.png
I've checked the disc usage and it appears I have enough on the G5 Backup to fit everything from Macintosh HD. I'm puzzled why it says the same disc is being used. These are (2) separate drives, not partitions. These images may help illustrate my architecture:
http://powermixx.com/atemp_dir/time_machine/machd.png
http://powermixx.com/atemp_dir/time_machine/g5backup.png
Any suggestions? Thank you.
Message was edited by: powermixx
powermixx wrote:
I want to backup the Macintosh HD onto the G5 Backup but I'm getting the following error:
http://powermixx.com/atemp_dir/timemachine/error.png
I've checked the disc usage and it appears I have enough on the G5 Backup to fit everything from Macintosh HD.
Not easily. To back up everything on the 382 GB used on the Macintosh HD volume at once, Time Machine will add 20% "padding" (workspace and in case the estimate is low), to get 458 GB, which won't fit. You can squeeze a backup onto it only by excluding at least 40 GB (so the added 20% will fit), then removing the exclusions and running another backup. But that's not going to leave much space for future backups of either drive.
I'm puzzled why it says the same disc is being used. These are (2) separate drives, not partitions.
It's probably warning you, as it should, about +G5 Bootable's+ backups being on the same drive as it's backups (when that drive fails, as they all do sooner or later, you risk losing everything). But it will do it, if you click +Use Selected Volume.+
Since you can now get 1 TB external drives for about $100, that's your best bet to back up both internals.
Similar Messages
-
I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.
Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store
-
Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?
Here's what I've found on the issue:
Pantone color definitions have changed (coinciding with CS6) — they are now "Pantone+" (I think that's what they're called). The "+" apparently means they're now LAB colors. Lab colors are not properly displayed in Preview (or in Finder previews) — they display as black (as far as I can tell, in all circumstances). I'm sure it's a tad more complicated than that, but that's the gist.
Now the bad news — nobody seems to know anything about a fix or workaround (unless you convert your PDFs to process — this might be a fix for sending to clients). It causes issues for me in AI files — being able to view them in the finder (with previews) is a HUGE time saver for my workflow... when they're all black, not so much.
In my chat with a director of product dev at Adobe, they placed the responsibility to fix on Apple (assuming Apple wants to support Pantone color definitions in their OS). -
New phone: lost old phone in a fire. How can I access my photos on iCloud from my old phone? In settings I see the storage for BOTH phones. They are separate but same account. Can I access iCloud through PC or is the info now useless since phone is gone?
What a crappy design. This is where Android is so much better. It seems to me like you have no control over your iPhone. It does whatever Apple has designed it to do without asking you first. On Android you can actually go in see all folders, document files, photo files etc and you have so much more control of everything. Apple s..cks!
-
Why am i getting this error? they are not the same?
1021: Duplicate function definition.
1021: Duplicate function definition.
stop();
import flash.events.MouseEvent;
// home button definition \\
// Portfolio button definition \\
Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
function pClick(event:MouseEvent):void{
gotoAndStop("getPortfolio");
// Contact Me button defintion \\
Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
function cClick(event:MouseEvent):void{
gotoAndPlay("contactme");
why am i getting this error the functions have different names... idk what to do they are for two different buttons I am using action script 3.0i did what u said and it said these two lines were the same
// Portfolio button definition \\
Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
function pClick(event:MouseEvent):void{ <--------this one
gotoAndStop("getPortfolio");
// Contact Me button defintion \\
Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
function cClick(event:MouseEvent):void{ <--------and this one
gotoAndPlay("contactme");
it gave me the same error but they are not the same -
Freeing memory for Internal Frames when they are closed
Does anyone have any advice for a way to completely free all references to InternalFrames and their contents when they are closed? It appears that many references to the frame are held deep within Swing. Our application hold references to large memory structures in the InternalFrame, which means that we have a large memory leak whenever a frame is closed.
try to remove all listeners added to components which are part of the JIF before you dispose of the JIF.
;o)
V.V. -
Hello Guys I have a problem that I can not get to the bottom.
Time Machine has suddenly stopped working it really slow to make up. Copy a few kb at a time and long hours it takes to close the back. (up to a few tens of megs, 10, 20 Mb).
I made the following list of tests that will follow along with the log file.
First of all I made a copy as root with Carbon Copy Cloner disk of the iMac. (So that they can go back in case of disaster)
Following the guides Pondini (pondini.org) I did the following steps:
1) Changed the internfaccia FW800 to USB hard drive (does not change anything, still slow)
2) Changed to another external HD for time machine with FW800 and USB (nothing changes still slow)
3) Recreated the full backup with Time Machine on either drive (still slow)
4) Reinstalled the 10.6.8 Combo Pack (still slow)
5) Re spootlight indexed with the disk (still slow)
6) At this point, in desperation I reinstalled on the internal drive of my iMac 10.6.8 creating a new user, User Migration Assistant from my hd clone with Carbon Copy Cloner. Recreated the full backup with Time Machine.
The first full backup is fast, but slow incremental backups are back (as to 'start a few kb at a time).
I compared the log files with those of my other machine with same configuration and I found these errors:
backupdir [19376]: CFPropertyListCreateFromXMLData (): Old-style plist parser: missing semicolon in dictionary.
mdworker32 [20950]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
You know help me? I saw that this error is from 10.5 to 10.7, but no one has found a real solution to the issue.
I never installed antivirus software and tried with different external drives COPN capacity equal to or greater than the external drive. Only at the end I tried to divide the external drive to back up into two parts by a 1.5 TB and 500 GB but with the same mistakes that I have described.
thanks
Stefano
Ciao Ragazzi ho un problema a cui non riesco a venire a capo.
improvvisamente time machine ha smesso di funzionare va veramente lento a fare backup. Copia pochi kb alla volta e impiega tanto tempo ore per chiudere il backup. (backup di poche decine di mega, 10, 20 Mb).
Ho effettuato le seguenti prove che vi elenco di seguito insieme al file log.
Prima di tutto ho fatto una copia come utente root con Carbon Copy cloner del disco del imac.(in maniera tale di poter tornare indietro in caso di disastro)
Seguendo le guide di Pondini (pondini.org) ho effettuato i seguenti passaggi:
1) Cambiato internfaccia del disco rigido da FW800 a USB (non cambia nulla, sempre lento)
2) Cambiato hd esterno con un altro per time machine con FW800 e USB (non cambia nulla sempre lento)
3) Ricreato il full Backup con time machine su entrambe i dischi (sempre lento)
4) Reinstallato il Combo pack 10.6.8 (sempre lento)
5) Re indicizzato con spootlight il disco (sempre lento)
6) A questo punto preso dalla disperazione ho reinstallato sul disco interno del mio imac il 10.6.8 creando un nuovo utente, Assistente migrazione utente dal mio hd clonato con Carbon copy cloner. Ricreato il backup completo con time machine.
Il primo full backup è veloce, ma i backup incrementali sono tornati lentissimi (come all' inizio pochi kb alla volta).
Ho confrontato il file log con quelli di un mio altro mac con la stessa configurazione ed ho trovato questi errori:
backupd[19376]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
mdworker32[20950]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sapete darmi aiuto? Ho visto che questo errore è presente dal 10.5 al 10.7 ma nessuno ha trovato una vera soluzione alla questione.
Non ho mai installato software antivirus ed ho provato con diversi dischi esterni copn capacità uguale o superiore al disco esterno. Solo alla fine ho provato a dividere il disco esterno del backup in due parti una da 1,5TB e una da 500 Gb ma con i medesimi errori che vi ho descritto.
grazie
Stefano
File LOG:
Jan 9 00:31:37 ihomez newsyslog[19803]: logfile turned over
Jan 9 00:33:26 ihomez com.apple.backupd[19376]: Copied 534.0 GB of 1020.2 GB, 649387 of 1786353 items
Jan 9 01:33:27 ihomez com.apple.backupd[19376]: Copied 728.3 GB of 1020.2 GB, 805293 of 1786353 items
Jan 9 02:33:27 ihomez com.apple.backupd[19376]: Copied 938.5 GB of 1020.2 GB, 807979 of 1786353 items
Jan 9 02:55:58 ihomez com.apple.backupd[19376]: Copied 808871 files (1012.7 GB) from volume i5 2TB.
Jan 9 03:08:03 ihomez com.apple.backupd[19376]: No pre-backup thinning needed: 100.0 MB requested (including padding), 383.44 GB available
Jan 9 03:10:13 ihomez backupd[19376]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 03:27:54 ihomez [0x0-0x12012].com.getdropbox.dropbox[0]: Sampling process 12446 for 5 seconds with 10 milliseconds of run time between samples
Jan 9 03:27:59 ihomez [0x0-0x12012].com.getdropbox.dropbox[0]: Sampling completed, processing symbols...
Jan 9 03:28:00 ihomez mds[19366]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Jan 9 03:28:00 ihomez [0x0-0x12012].com.getdropbox.dropbox[0]: Sample analysis of process 12446 written to file /Users/home/.dropbox/s4f0a50aa
Jan 9 03:33:30 ihomez com.apple.backupd[19376]: Copied 717781 files (13.0 MB) from volume i5 2TB.
Jan 9 04:06:38 ihomez com.apple.backupd[19376]: Starting post-backup thinning
Jan 9 04:06:38 ihomez com.apple.backupd[19376]: No post-back up thinning needed: no expired backups exist
Jan 9 04:06:39 ihomez com.apple.backupd[19376]: Backup completed successfully.
Jan 9 04:33:45 ihomez com.apple.backupd[20287]: Starting standard backup
Jan 9 04:33:46 ihomez com.apple.backupd[20287]: Backing up to: /Volumes/Time Machime LA/Backups.backupdb
Jan 9 04:33:46 ihomez mds[19366]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Jan 9 04:40:18 ihomez com.apple.backupd[20287]: No pre-backup thinning needed: 100.0 MB requested (including padding), 382.47 GB available
Jan 9 04:59:25 ihomez backupd[20287]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 05:31:48 ihomez com.apple.backupd[20287]: Copied 720482 files (13.0 MB) from volume i5 2TB.
Jan 9 05:45:22 ihomez com.apple.backupd[20287]: No pre-backup thinning needed: 100.0 MB requested (including padding), 381.98 GB available
Jan 9 06:05:14 ihomez backupd[20287]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 06:32:57 ihomez com.apple.backupd[20287]: Copied 12.7 MB of 12.7 MB, 538084 of 538084 items
Jan 9 06:36:52 ihomez com.apple.backupd[20287]: Copied 717781 files (12.7 MB) from volume i5 2TB.
Jan 9 08:12:05 ihomez mds[19366]: (Normal) DiskStore: Creating index for /
Jan 9 08:12:30 ihomez System Preferences[20910]: Preference bundle "/Users/home/Library/PreferencePanes/Archives.prefPane" is misplaced, ignoring...
Jan 9 08:12:32 ihomez System Preferences[20910]: Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:\n /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
Jan 9 08:12:32 ihomez System Preferences[20910]: Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x20056cb80 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
Jan 9 08:23:40 ihomez mdworker[20945]: Error, could not create MachMessagePort for com.apple.AddressBook.abd
Jan 9 08:23:46 ihomez mdworker32[20948]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 08:23:52 ihomez mdworker32[20950]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 08:30:47 ihomez com.apple.Finder[225]: Failed to send message to backup server: error = -2
Jan 9 08:30:41 ihomez com.apple.backupd[20287]: Starting post-backup thinning
Jan 9 08:30:49 ihomez com.apple.backupd[20287]: No post-back up thinning needed: no expired backups exist
Jan 9 08:30:51 ihomez com.apple.launchd[1] (0x1001017c0.mach_init.mdworker[20949]): Exited: Killed
Jan 9 08:35:39 ihomez mdworker[20959]: (Normal) Import: Spotlight giving up on importing file /Users/home/Desktop/testdisk-6.11.3/recupero/recup_dir.34/f2515784.abcdp after 240.256 seconds, 239.841 seconds of which was spent in the Spotlight importer plugin.
Jan 9 08:35:39 ihomez com.apple.launchd[1] (0x1001017c0.mach_init.mdworker[20959]): Exited with exit code: 75
Jan 9 08:36:55 ihomez com.apple.backupd[20287]: Backup completed successfully.
Jan 9 08:37:17 ihomez mdworker32[20974]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 08:39:36 ihomez mdworker[20969]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 08:41:09 ihomez mdworker[20969]: Corrupt JPEG data: 10053 extraneous bytes before marker 0xed
Jan 9 08:41:37 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20969]: zip importer encountered an error (3) scanning "/Users/home/Downloads/Griffin Seconda serie.zip".
Jan 9 08:45:44 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20969]: FontImporter: Validation failed - "/Users/home/Library/Fonts Disabled/MT Extra".
Jan 9 08:45:44 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[20969]: FontImporter: Validation Result - "<CFArray 0x10204f310 [0x7fff70eaeee0]>{type = mutable-small, count = 5, values = (\n 0 : <CFString 0x102762af8 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityInformation"}\n 1 : <CFString 0x102762b18 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityTechnicalError"}\n 2 : <CFString 0x102762b58 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityMajorError"}\n 3 : <CFString 0x102762b78 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityFatalError"}\n 4 : <CFString 0x102762b38 [0x7fff70eaeee0]>{contents = "kATSFontTestSeverityMinorError"}\n)}".
Jan 9 08:45:55 ihomez mdworker[20969]: Error, could not create MachMessagePort for com.apple.AddressBook.abd
Jan 9 08:46:09 ihomez mdworker[20969]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 09:03:32 ihomez mdworker[21011]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 09:04:02: --- last message repeated 5 times ---
Jan 9 09:05:15 ihomez mdworker[20969]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 09:05:43 ihomez mdworker32[21036]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 09:05:44 ihomez mdworker[20969]: iCal.mdimporter: could not parse ICS file: /Applications/Microsoft Office 2008/Office/EntourageCore.framework/Versions/12/Resources/it.lproj/Timezones.ic s
Jan 9 09:13:28 ihomez mdworker32[21053]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 09:16:17 ihomez mdworker32[21074]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 9 09:33:45 ihomez com.apple.backupd[21102]: Starting standard backup
Jan 9 09:33:46 ihomez com.apple.backupd[21102]: Backing up to: /Volumes/Time Machime LA/Backups.backupdb
Jan 9 09:40:46 ihomez com.apple.backupd[21102]: No pre-backup thinning needed: 100.0 MB requested (including padding), 381.68 GB available
Jan 9 09:57:57 ihomez backupd[21102]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 10:29:58 ihomez com.apple.backupd[21102]: Copied 718890 files (12.9 MB) from volume i5 2TB.
Jan 9 10:43:35 ihomez com.apple.backupd[21102]: No pre-backup thinning needed: 100.0 MB requested (including padding), 381.48 GB available
Jan 9 11:02:16 ihomez backupd[21102]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 9 11:31:08 ihomez com.apple.backupd[21102]: Copied 12.7 MB of 12.7 MB, 642967 of 642967 items
Jan 9 11:33:07 ihomez com.apple.backupd[21102]: Copied 716189 files (12.7 MB) from volume i5 2TB.
Jan 9 13:26:26 ihomez com.apple.backupd[21102]: Backup deletion was canceled by user
Jan 9 13:26:26 ihomez com.apple.backupd[21102]: Starting post-backup thinning
Jan 9 13:26:27 ihomez com.apple.backupd[21102]: Backup completed successfully.Thanks for the quick response.
I followed the steps you listed and also remove the files that were creating problems spootlight, including the audio plugin and the panel preferences file.
Then I stopped by the timemachine reindexed spootlight 'option in the preferences panel spootight privacy. After I restarted my iMac and formatted the external drive again, Time Machine and restarting a full backup. This morning after a quick full backup and disk indexing completed incremental backups are always slow. Proceeds with a few kb at a time. I resend you the log files and screen capture. My iMac is constantly backed up.
Thank you for your time.
Stefano
File log:
Jan 10 00:30:05 ihomez newsyslog[757]: logfile turned over
Jan 10 00:43:30 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling process 278 for 5 seconds with 10 milliseconds of run time between samples
Jan 10 00:43:35 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling completed, processing symbols...
Jan 10 00:43:35 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sample analysis of process 278 written to file /Users/home/.dropbox/s4f0b7ba2
Jan 10 00:44:08 ihomez mdworker32[805]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:00:51 ihomez mdworker[579]: -[ABAddressBook sharedAddressBook] Can't ABACQUIRE_FILE_LOCK /SourceCache/AddressBook/AddressBook-883/Framework/AddressBook/ABAddressBook.m: 3314
Jan 10 01:04:41 ihomez osascript[897]: Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/QXPScriptingAdditions.osax"
Jan 10 01:07:56 ihomez mdworker32[930]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:08:01 ihomez mdworker32[931]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:09:44 ihomez com.apple.backupd[479]: Copied 94.7 GB of 990.4 GB, 506176 of 1771170 items
Jan 10 01:13:34 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling process 278 for 5 seconds with 10 milliseconds of run time between samples
Jan 10 01:13:39 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sampling completed, processing symbols...
Jan 10 01:13:39 ihomez [0x0-0xe00e].com.getdropbox.dropbox[278]: Sample analysis of process 278 written to file /Users/home/.dropbox/s4f0b82ad
Jan 10 01:14:19 ihomez mdworker32[946]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 01:20:02 ihomez mdworker32[969]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:00:16 ihomez mdworker32[1025]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:09:44 ihomez com.apple.backupd[479]: Copied 316.2 GB of 990.4 GB, 530801 of 1771170 items
Jan 10 02:10:51 ihomez mdworker32[1052]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:11:00 ihomez mdworker[937]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 02:15:01 ihomez mdworker[937]: Corrupt JPEG data: 10053 extraneous bytes before marker 0xed
Jan 10 02:15:37 ihomez mdworker32[1063]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:30:55 ihomez mdworker32[1098]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 02:38:32 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[937]: FontImporter: Validation failed - "/Users/home/Library/Fonts Disabled/MT Extra".
Jan 10 02:38:32 ihomez /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[937]: FontImporter: Validation Result - "<CFArray 0x10256a570 [0x7fff70e20ee0]>{type = mutable-small, count = 5, values = (\n 0 : <CFString 0x104eb5af8 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityInformation"}\n 1 : <CFString 0x104eb5b18 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityTechnicalError"}\n 2 : <CFString 0x104eb5b58 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityMajorError"}\n 3 : <CFString 0x104eb5b78 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityFatalError"}\n 4 : <CFString 0x104eb5b38 [0x7fff70e20ee0]>{contents = "kATSFontTestSeverityMinorError"}\n)}".
Jan 10 02:38:55 ihomez mdworker[937]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 02:38:56 ihomez mdworker32[1115]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 10 03:09:44 ihomez com.apple.backupd[479]: Copied 517.9 GB of 990.4 GB, 651137 of 1771170 items
Jan 10 04:09:45 ihomez com.apple.backupd[479]: Copied 723.7 GB of 990.4 GB, 787449 of 1771170 items
Jan 10 05:09:46 ihomez com.apple.backupd[479]: Copied 947.2 GB of 990.4 GB, 789860 of 1771170 items
Jan 10 05:20:55 ihomez com.apple.backupd[479]: Copied 790597 files (982.2 GB) from volume i5 2TB.
Jan 10 05:32:32 ihomez com.apple.backupd[479]: No pre-backup thinning needed: 1.60 GB requested (including padding), 873.52 GB available
Jan 10 05:33:14 ihomez mdworker[1452]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 05:35:07: --- last message repeated 5 times ---
Jan 10 05:35:36 ihomez backupd[479]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 05:35:45 ihomez mdworker[1475]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 10 05:59:42 ihomez com.apple.backupd[479]: Copied 699486 files (1.9 MB) from volume i5 2TB.
Jan 10 06:34:52 ihomez com.apple.backupd[479]: Starting post-backup thinning
Jan 10 06:34:52 ihomez com.apple.backupd[479]: No post-back up thinning needed: no expired backups exist
Jan 10 06:34:52 ihomez com.apple.backupd[479]: Backup completed successfully.
Jan 10 07:10:09 ihomez com.apple.backupd[1752]: Starting standard backup
Jan 10 07:10:09 ihomez com.apple.backupd[1752]: Backing up to: /Volumes/TimeMachine LA/Backups.backupdb -
I recently had to purchase a new computer, after doing so I no longer can open my audible books. the list is there, but I get an error message telling me that the original file cannot be found. How can I redownload them when they are not in my purchased list anymore when I go to the Apple Store??
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases. -
I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?
Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak -
Error when sending message: 500 Internal Server Error
Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
NisarI think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar -
How to allow user refer back to lecture when they are taking a quiz?
Hi everyone,
I'm new to Captivate and now I am kinda in a dilemma. Thanks for your
time watching my post!
I created a CBL in Captivate 3, the first 10 slides is a lecture and it
is followed by a 10 slides quiz set as SCORM standard.
I want the learner to be able to refer back to the lecture when they
are taking the quiz, I tried to in 2 approaches and they both have
issues in different ways.
Approach 1: "allow backward movement", and "infinite attempts". The
problem with this approach is, when the learner click "review the
quiz" and when they click "back" on the first quiz slide, the whole
quiz will be start all over, the score is flipped back to zero.
Because the quiz seeing this as a new attempt, and the learner is
allowed to make "infinite attempts" as it was configured.
Approach 2: Set "allow backward movement" and allow only "1 attempt".
The problem with this approach is, when the learner is in the middle
of the quiz and refers back to the lecture, the quiz will be
automatically shown as completed. And the learner will not get a
chance to answer those unanswered questions.
So it looks like whenever I let the learner refer back to the lecture
in the middle of a quiz, the quiz will be seen as completed!!! What am
I doing wrong? Is there a better approach that I can "allow backward
movement" and still allow user resume their quiz from where they left
off?
Sorry for the long post, I was not able to express it in a more
concise way.
Any help is really appreciated!!
-DavidWhat you are seeing is the behaviour as-designed in Captivate for quizzing.
Each Captivate movie has a "quiz scope" which begins with the very first scorable object, and ends at the Quiz Results slide. If you enter the quiz scope by starting a quiz slide, then jump back outside the quiz scope, by going back to the main content, Captivate's default behaviour is to freeze the quiz at that point. So when Captivate refers to Allow Backward Movement, it's only talking about backward movement within the quiz scope.
For example, if you get to question 1 but don't answer it and go to question 2, then answer that one, and go back to question 1, you'll still be able to answer question 1. The quiz won't be frozen. However, if you had jumped back to any slide before question 1, your quiz would have been frozen with whatever score you had accumulated at that point.
There may be a workaround you can use to get closer to what you want. Since any scorable object is classified as being part of the quiz, you can add a button on one of the very first slides that the user needs to click in order to advance. Set the properties of this button (or click box) to report a score to the quiz. This makes it part of the quiz scope. Now any content slides that fall after this button slide are also within quiz scope and moving back to them will not have the same effect of freezing the quiz.
Please bear in mind one more aspect of quiz questions: If you answer a quiz question, and then move off the slide (forward or back) that quiz question answer is frozen and cannot be changed unless you Retake the Quiz or relaunch the entire module.
Hope this helps clear up the way things work. -
My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?
You might need to clean the headphone port (I was in the same situation and this worked for me). Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in. After cleaning the issue was resolved.
-
Bridge CS3 shows different colour on previews when they are selected
LS,
Problem, all of a sudden: Bridge CS3 shows different colours on previews when they are clicked and selected. At first, they are ok, they look the same as they are on camera. When I click an image and select it, it looks like there's a colour profile being applied to it, making the colours dull, its also pulls back the contrast of the image. Can this be corrected in prefences or something? So that the previews are the same as non corrected raw processed files?
DavidOh, good grief… Sorry. I forgot you haven't updated yet. My bad.
In CS3 you'll find the Auto Tone adjustments in the Camera Raw preferences, and the use of high quality in Bridge preferences. You won't have all the options available in CS4.
If you are shooting raw, the upgrade to CS4 just to be able to use ACR 5.3 (and now 5.4) is a no-brainer. Well worth the money.
If you don't upgrade, you'll be leaving a lot of raw image quality on the table, as Jeff Schewe says. ACR 4.6 is light years behind 5.3 and 5.4.
In addition, Bridge 2.x (CS3) is easily the worst piece of software ever released by Adobe or any other major software developer. It should have been fixed for free by Adobe, but shamefully, it wasn't. I would not hesitate to call it an unusable, worthless piece of cr@p. Fortunately Bridge 3.x (CS4) is much better.
However, I repeat: What you are seeing is perfectly normal, expected behavior.
Message was edited by: Ramón G Castañeda -
WOT and Webutation is showing as disabled when they are not
WOT and Webutation is showing as disabled when they are not .The icons show,but no color on icons. Says WOT is disabled when its not. Also the same on Webutation. Tried uninstalling then reinstalled both and the same thing happened. Tried Wot on another users account and theirs work. Can someone help me on these issues?
capaho wrote:
That's like saying a boat is an airplane because it's not a car.
SMH
In other words, how does your explanation account for ED (enhanced definition)?
ED is generally considered to be 576p or 480p, but this is not universally accepted and these resolutions are often accepted as HD also. Additionally an ED signal uses non square pixels just as SD does so the horizontal pixel dimensions should be no more than 720. Exactly how the tv would treat these resolutions I don't know (yet).
If you have a copy of the source code for the function that displays the HD icon, please post it so I can take a look at it.
Why should I have such a copy and why is it relevant. The issue here is that the OP believes his video is incorrectly labelled HD which is not the case. There may or may not be anomalies in the way the tv attributes the HD label to some files (although it isn't the case for me), however the OP has incorrectly converted his source video and they are no longer SD, they are also not ED by whichever definition you wish to apply and any such anomalies should they exist are not responsible for the OP's files being labelled HD. -
Since I have Maverick, my children can't start any app when they are on their accounts
I installed Maverick and since that, when my children open their counts as users, they are note able to start any application, neither Safari, Mail, Word, nothing...
The only thing I found that was related is here: http://reviews.cnet.com/8301-13727_7-57523360-263/fixing-parental-controls-probl em-in-os-x-10.8.2/
I don't have manage accounts, so I'm not sure if the files are in the same place.
If they are, I would first convert the accounts back to standard, then apply steps 2 and 3.
Maybe you are looking for
-
Went to update my itunes upon request from apple, updated now I have an error 7. I went to apple site to download itunes get message saying it is uploaded successfully. Go to itunes unable to because of error message. Called apple... they are a joke
-
Getting error in transporting table ztable...
HI i am getting the below error from basis whne moving a table and table maintainence.... the field error which is being given i already delted from table and replaced with the corect one ie zcusemail-email_id but it is giving error of old one? why
-
Problem in designing multiple columns crystal report
I have got a crystal report having around 25 columns(all are test boxes) in header section.Out of these 25, I can view only 10 columns in crystal reports design window. When I view the contents as 25% I can view all the columns. Now I want to add one
-
Calender Notification quit after installing os 6 on 9800
I should have left well alone!! I did a software update to os 6 and now my default calendar is missing and my notifications don't work. The only "Send Using" options available are facebook and my email address. I believe this use to have "Default" as
-
What types of NFC tags does the Lumia 920 support?
I bought some Mifare Classic 1k tags online hoping I could write and read some custom tags with the few apps on the marketplace but it doesn't seem the Nokia interacts with them well. I found this on wikipedia. "At the moment BlackBerry phones and th