Same Disk Utility issue appeared on 2 different Macs after 10.4.6 upgrade

Yesterday I upgraded the following two different Macs from 10.4.5 to 10.4.6:
1. iMac G3 400MHz, 384MB ram, Maxtor 40GB HD (update via Software Update)
2. PowerMac G4 450MHz AGP, 500MB ram, Ata 133 interface with 160GB HD from a brand I don't remember (update via separate 10.4.5->10.4.6 installer)
The update went fine and both computers booted and function normally in all obvious respects.
On the other hand, when I ran Disk Utility on both Macs and verified the startup drive, the SAME IDENTICAL problem was reported:
Verifying volume “Internal HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Internal HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I ran Disk Utility from the 10.4 Install Disk but it says it coulnd't repair the damage.
I'm not sure about how severe this issue is. I'll refrain from reinstalling everything on both computers until more light is shed on the problem. I'm posting this in the hope that others confirm the issue and Apple take a look into it.
Lorenzo

Lollo, Welcome to the discussion area!
This error appears to be related to Photoshop CS2, Illustrator CS2, and Adobe Creative Suite 2. See File system, I/O, Illegal Name errors, or system crash after you install (Photoshop CS2, Illustrator CS2, Adobe Creative Suite 2).
Message was edited by: Duane

Similar Messages

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

Disk Utility Issues Wait to Install Leopard

Dear fellow Mac users,
Rather than a question, this is a recommendation to those who are wondering whether to install Leopard now or to wait until it gets really stable.
My experience in installing Leopard has not been positive and I chose to revert to Tiger. After discovering several issues and going to the "Genius Bar" of the local Apple Store, I fortunately have been able to restore all my previous settings.
The loss has been mostly time and money, and they frightened me up suggesting that I had to change my hard drive. For those who might experience similar problems, let me provide some details.
1. Installation of Leopard
After carefully making a bootable backup of my HD on an external drive, I installed Leopard choosing the Option "Erase and install." This occurred without visible glitch. After updating the system to its latest version, I migrated all my data and settings. The result was an incredibly slow system, completely useless. It cannot have been the results of my settings, because I also created a "clean" account called "Maintenance," with the same results. On the recommendation of the "Apple Genius" I also added 1 GB of memory, getting a total of 1.5 GB of RAM installed to the cost of $150. It did NOT improve the situation.
2. Disk Utility
Because I suspected problems with privileges, I tried to run the Disk Utility. The result was an endless spinning wheel. After waiting several hours, I had to force quit the application. Tried to run it from the install DVD of Leopard, with the same results. People at the Genius Bar also tried their disk utility after booting from an external drive, without any success. They diagnosed a probable failure of the hard drive and recommended that I replace it. Fortunately, I didn't trust this groundless recommendation and made a last attempt by erasing Leopard and reinstalling Tiger. Now it runs just fine, and there is not the slightest mechanical problem. Apparently, and I only discovered this today, the whole disk check procedure changed with Mac OS 10.5, and at this stage it is a complete mess, with enough bugs in Disk Utility to keep the developers busy for a couple of months. I came across discussions of this on the Mac FixIt Website.
Thus, my recommendation at this stage is that if you have Mac OS 10.4.11 running fine you JUST STICK WITH IT and be patient for a few more months. Upgrading at this stage amounts to loosing time, energy, and money. Of course, I am sure that Mac OS 10.5 has many promising features and look forward to using it in the future, but not now. I would be happy to hear contradictory opinions, if any.
Best wishes for patience.

Nerowolfe,
I have installed Leopard and have had nothing but problems as well. Perhaps you can help me. I am ready to roll back to Tiger. These are just a few:
1. I cannot mount my external firewire drives. I have separately tested each and they work fine, I booted with the Tiger disk and they mounted fine, I reset the firewire port and when I connected them they mounted on my desktop, but not in the finder window and when I tried to open one, it just hung. I have been unsuccessful after many attempts to mount one of them with Leopard.
2. I appear to get random hangs. I have a 160GB hard drive and 2GB memory. I have 42 GB space left on the hard drive....yet I continue to have random hangs, especially when I try to open disk utility
3. Spotlight just does not work, period
4. I keep finding locked folders. Right now my CS3 is locked and even after going into get info and unlocking it, it just locks back and I am unable to open the application. I am a photographer and have been unable to do any work for the past 2 weeks while I am messing around with my computer. Now I have Christmas photos to sort and can't access the photos on the external drives or even open CS3
I have searched the forums, tried many of the recommendations, but nothing is working for me....perhaps since you have been successful you could give me a hand with these issues.
I wait for help.......
Other than that, how do I uninstall Leopard and reinstall Tiger????

Mail, Keychain & Disk Utility Issues After Install

My clean install of Leopard seem to go fine. After restart it wanted to grab an Apple Remote Desktop update, I believe, via software update. Re-installed clean copies of further mac software and known Leopard compatible 3rd party apps.
My problems started to appear when I used migration assistant to transfer 2 accounts from my 10.4.10 backup. Both accounts went over, but on one the mail upgrade process consistently failed and on the other the keychain seemed to be of no use.
All's fine now, I manually imported the errant mail acount and just started with a fresh keychain on the other offending account. I know the backup was sound as I subsequently used it to restore a Tiger install as a fallback on another disk.
My last issue appears every-time I run Disk Utility to verify and repair permissions. I get the following text displayed part way through a verify and or repair.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
The verify/repair completes and I can quit Disk Utility. I'm presuming this is as a result of the early software update Leopard wanted to perform and the current shipping version of Disk Utility has no idea of the desired permission state of this file?
Was just wondering if anyone else had experienced any of the above or had any explanation?
Hope you're all having more fun than headaches with Leopard.

Nerowolfe,
I have installed Leopard and have had nothing but problems as well. Perhaps you can help me. I am ready to roll back to Tiger. These are just a few:
1. I cannot mount my external firewire drives. I have separately tested each and they work fine, I booted with the Tiger disk and they mounted fine, I reset the firewire port and when I connected them they mounted on my desktop, but not in the finder window and when I tried to open one, it just hung. I have been unsuccessful after many attempts to mount one of them with Leopard.
2. I appear to get random hangs. I have a 160GB hard drive and 2GB memory. I have 42 GB space left on the hard drive....yet I continue to have random hangs, especially when I try to open disk utility
3. Spotlight just does not work, period
4. I keep finding locked folders. Right now my CS3 is locked and even after going into get info and unlocking it, it just locks back and I am unable to open the application. I am a photographer and have been unable to do any work for the past 2 weeks while I am messing around with my computer. Now I have Christmas photos to sort and can't access the photos on the external drives or even open CS3
I have searched the forums, tried many of the recommendations, but nothing is working for me....perhaps since you have been successful you could give me a hand with these issues.
I wait for help.......
Other than that, how do I uninstall Leopard and reinstall Tiger????

Disk utility issues

Having an issue with Disk Utility/Repair HD. Basically I ran a disk utility and was told I need to restart my computer using the command R function to enter into the disk utility via the Repair HD. However when I did so, the Repair HD disk utility tells me that there appears to be no issue. Stuck in a bit of a loop right now. Any help would be appreciated.

You tried a Verify Disk while in OS X's Disk Utility and afterwards DU said there were errors and you needed to restart into the Recovery HD to do a Repair Disk? Then, when you restarted into the Recovery HD using Command+R, launched Disk Utility and did a Verify Disk, DU told you your disk was OK and there were no errors?

DVD Drive dropping off grid, followed by Finder and Disk Utility issues

I'm having a very strange series of problems with my 8 core 2.8 MacPro.
A few weeks back I did a DIY repair/replace of my optical drive. For the last few months it was failing to open when the eject button was pushed. The drive would make a noise as if it was going to eject but it would take more and more time/tries to fully engage. After a few calls to Applecare and a few attempts of trouble shooting I got a replacement drive.
And now I'm having a whole slew of other problems and am at a loss as to what is causing them and how to fix them.
The drive ejects beautifully...for a while. But for some odd reason after an indeterminate period of time (by which I mean it's not consistently the same amount of time), the drive simply ceases to exist in the eyes of the computer. It will not show up in "About this Mac" (all that shows up is a blank screen when I click the "Disc Burning" section of "More Info"). It will not eject any disc that is in the drive (which shows up in finder sometimes...even if it can't be played by the DVD player application). It doesn't show up in Disk Utility.
In fact, after a while nothing shows up in Disk Utility. It gets frozen on "Gathering Disk Information" and doesn't show any of the hard drives (yet all of them show up in the Finder window and on the desk top).
And then the great grinding down of operations goes into full swing - sometimes the finder window won't open. Applications won't quit. Going to the Finder/desktop results in Beach Ball of Death. Yet I can force quit using the Dock. Sometimes I can shut down, sometimes I need to use a hard shut down using the power button.
I have rebuilt permissions. I've used Disk Warrior to rebuild/repair all disks. I've unplugged all external hard drives. And upon restarting, things will work...for a while...and then things start going wrong in a domino effect.
I haven't seen any pattern in regards to programs being used (it doesn't, for example, start after I launch any specific program.
Any ideas or suggestions would be appreciated before I call Applecare again!
Thanks

Thanks for the hard drive tip. I'll see if that helps...
Wish I could tell you what drive I have but today it didn't work upon start-up and I didn't realize it until I started to process/compress something.
Forgot to mention two other things...
1) I did a virus scan and everything came clean
2) This all started last week after coming home and doing an Apple automatic software update. Unfortunately I don't know what it was and not sure if it is linked, as I swapped out the drive right before I left for a long weekend (so only tested the new drive briefly)

Hard Drive Issue? Disk Utility issue?

Every once in a while i run disk utility to see if my disk is running properly. I ran permissions and got all of this in the log window. I backed up my drive and re-installed MacOS X and re-ran permissions and got the same log below. I then ran DiskWarrior and rebuilt my directory, then re-ran permissions again, again getting the same log below. What does all of this mean, and what can i do to fix this?
"Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Warning: SUID file "bin/rcp" has been modified and will not be repaired.
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
ACL found but not expected on "Applications".
Permissions repair complete"

What does all of this mean,
Nothing to worry about.
and what can i do to fix this?
Nothing - Apple will need to clean this up, which they will probably do with some future update. In the meantime, there's no need to worry about any of the above.
See this kbase article, which lists permissions errors that can be safely ignored:
http://support.apple.com/kb/TS1448

DISK Utility issue..Please HELP

OK I had a 200 GB Hard Disk that I was using on my Windows machine. Since I am a Mac Guy now, I decided to buy an external USB enclosure, and use this as extra storage space. I am using DISK Utility to first partition the drive (1 partition) and then proceeded to Erase with zeros (1 time). Last night when I started this process it estimated a completion time of 3 hours. A few hours later it estimated at 1 hour and 16 mins. That was 8 hours ago. I hear the disk making noise as if it is writing, but I do not see any progress.
I was doing a Mac OS Extended (Journaled) and had the Install Mac OS 9 Disk Driver option checked. Not sure what difference this makes as all I want to use this disk is for storing photographs.
Has the process failed and am I in an eternal wait state? Does it normally take this long? Should I keep it running for the next 24 hours just to see? Suggestions please...
Thx in advance.

Well it sounds like Disk Utility has hanged. Open up Activity Monitor Applications/Utilities. If it is hung it will be in red...I'm pretty sure, I don't really remember the last time an app hung on my machine.
If everything is fine, it might just be that it's a big drive and it takes along time.
BTW, it seems sort of backwards to me to partition and then erase. If I were I would erase the disk FIRST, using the format you described, and THEN partition.

Disk Utility issue-Error: The underlying task reported failure on exit

When I run Disk Utility on the hard drive( repair permissions/verify disk), I see an "illegal name" message and the following error message and DU will not complete the "verify disk" function.
-Error: The underlying task reported failure on exit
What does this mean and how do I fix it?
Thanks, Pete
iMac 17 G5 Mac OS X (10.4.3) Igb ddr ram and winning attitude

Thanks, I have deleted the legal and legal. files but DU is erroring with this message now;
Volume Header needs minor repair
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit

OS X 10.6.8 Disk Utility Issue

I am running OS X 10.6.8
Through disk utility, I have been informed that the hard disk needs to be repaired by booting from my OS X disk, and running the utility. The problem is I can't find my disk. Any other solutions?

When you restart with the shift key held down, that's called a safe boot. One of the actions a safe boot does is to do some disk maintenance, and it may take care of your disk repair. Might not, but it might.
If that doesn't do it, if you have another mac you can attach via a firewire cable, you can reboot your iMac holding the T key down, then, with the iMac in target disk mode, you can run the disk repair from the other mac on the iMac's hard drive.

TS2986 I keep getting the message that my HD is full, when I run the disk utility it appears that over 400 GB are in the "Other" section, how can I access that area to clean up?

Please help me to figure out how to clean up my HD. When I run the disk utility I get the following view:
As you can se 467.79 GB are in the "Other" section, but I cannot find a way to get to that and clean it up, please anyone out there How can I clean that up?

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

HT2648 I want to Repair Disk Permissions, but I do not have disk utility 10.4.3 on my Mac os X. How do I download it? Why did I not get it when I purchased the computer 2 years ago?

I am having frequent pop-up boxes. It is very annoying. It was suggested that I repair permissions, but when I try, my 2 year old computer. with OSX operating systems has an old desk utility, and I cannot use it. How do I acquire disk utility 10.4.3?

Any reason why you have not updated to the final version 10.4.11 of Tiger?
General advice on updating Tiger:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

IMac OS 10.9.4 software updates apparent cause of Corel Painter X3 crash: I have run Disk Utility - no probs there, reinstalled Painter X3 (after first uninstalling X3). What now?

iMac 10.9.4 software updates last week is apparent cause of my Corel Painter X3 now crashing. I ran Disk Utility check - no probs there. I reinstalled Painter X3 (after first uninstalling X3), still no success. Online Mac support suggest I use MacCleaner - tried at online Mac store & was referred to 0800 tech support for guidance - still waiting for reply.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Disk utility reports "unused node is not erased" after installing 1TB HD

Hi there,
I just installed a brand new 1TB HD into a 2006 Intel iMac. I booted from the Snow Leopard installer DVD and tried installing the OS, but I received a kernel panic. I rebooted from the installer DVD again and ran Disk Utility which reported multiple instances of "unused node is not erased" and could not repair the disk. I re-partitioned the disk but each time Disk Utility gave the same error. I rebooted from the DiskWarrior DVD and rebuilt the directory (DW found no errors). I then rebooted from SL DVD again and ran Disk Utility which found the same "unused node is not erased" errors but this time was able to repair them! I'm now trying to reinstall the OS for a second time.
I'm wondering from this bizarre behaviour whether
a) I have a faulty (new) HD
b) there might be something else wrong with my mac causing these errors.
Any assistance would be greatly appreciated!
Cheers,
Greg

Well, I attached another good external drive via FireWire, booted the 2006 iMac from the SL installer DVD, partitioned it with DU, then ran DU Repair Disk, and Disk Utility immediately gave me "unused node is not erased" errors and was unable to repair the drive.
I attached the same good external drive via FireWire to another Mac and repeated the same procedure: this time DU gave me no errors at all.
I'm going to assume my 2006 iMac has a faulty logic board or SATA controller (with cost of repairs probably more than the computer is worth). Would you agree?
Thanks again!

Help! Disk Utility failed to restore my 750gb Mac HD

Here's the story. A couple weeks ago I successfully installed Windows 7 Home as a bootcamp partition using Disk Utility, not Bootcamp Assisstant, I clicked on my 750gb mac drive, clicked on partition, clicked the "+" symbol to split the HDD into a second partition, allocated 200gb for this Windows 7 partition remaining 550gb for Mac HD, made it into MS-Dos Format so I can format it into NTSF during the Windows installation; everything was working fine, I even was successfully running Parallels 7 with it.
So here's my problem, the other day I purchased Windows 7 Professional, decided I wanted to do a complete new installation so I went into my Mac OS X Lion and went into Disk Utility, deleted the Windows partition, then dragged the corner of my Mac HD putting it back to 750gb. Now my bootcamp partition of Windows 7 HD is deleted so I went ahead and hit the "+" to create a partition for Windows 7 Pro HD, it gave me a Failed Error message, so I went into my Mac OS HD and repaired Disk, even hit the set permissions button), those both didnt fix my problem of creating a partition.
So i go into bootcamp assistant and went through the process, i already have the mac drives, hit continue, then it showed me what i can allocate for Windows. It tells me I only have 345gb to allocate a Windows partition, but I should have 200gb ontop of that. My total HDD is 750gb and I only have 550gb available for me to use :(. How do I get the remaining 200gb i used from my old windows partiton I already deleted. By the way, I already allocated 750gb to my Mac HDD freeing up all the free space.
Can anyone help? I can send screenshots if needed.
Thank you!

Carbon Copy Cloner your Lion partition to a HFS+ Journaled formatted external powered drive, "hold option boot" from it, check it out and then use Disk Utility there to erase the entire drive and reformat, reverse clone.
You'll loose the Lion Recovery Partition, but you got clones on external drives.
You have to reformat the whole drive, as the GUID partition map is off and needs to be updated correctly.
Also you can download the Lion Recovery Disk Assistant in advance and/or create "hold c" Lion boot DVD's from the MacAppStore Lion installer by holding option key and clicking on Purchases and downloading the Lion installer again and following these instructions.
http://eggfreckles.net/notes/burning-a-lion-boot-disc/
Also just in case you need it as you can always boot your Snow Leopard disk and install then upgrade to Lion on a blank drive without a Lion Recovery Partition.
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Once you got Lion up, then Bootcamp the Windows 7 Pro.
You can try WinClone to clone Windows, I don't know how well it will work with Lion, it hasn't been updated recently, your best bet would be to fresh install.

Same Disk Utility issue appeared on 2 different Macs after 10.4.6 upgrade

Similar Messages

Maybe you are looking for