Same e-mail for 2 different persons

Today when i checked my e-mails, i found out that i had a automated mail from skype that said
"Your registered e-mail haw changed succesfully ... etc", but i hadnt do that. The e-mail came to  the e-mail address that i already have  registered for my skype account.
At first i thought that someone tried to take over my account. So i request a new password in that address, and when i entered the new pass and followed the link i found out that there is another profile of another person with the same initials with me, that has registered a new skype account with the same e-mail as mine, a hotmail e-mail address.
So the problem is this. How can he open a skype account with the same e-mail as me? Doesnt skype sends a confirmation e-mail that you have to open and follow to complete a new account registration? How could that person do that? And also since both skype and hotmail/outlook are microsoft products which customer support is going to assist me? Because the other guy since i changed the pass he can not enter his account

apparently it is possible to register someone else's email address when a new account is created -- if so, that is bad
but the good news is that no one can hack your account by doing this as long as you alone control the email address that is registered
when you ask Skype for a password reset you are asked to provide the registered email address, and the reset token can be applied to any Skype Name that registered that specific email address
so if you only reset the password for your own Skype Name, then the password for the other account has not been changed at all, and never can be unless YOU do it (since the tokens only come to you)
otoh, if you already usead a token to change the password for the other account then, yes, that user can no longer sign in to Skype
in either case, you should contact customer service to get this sorted
Regards,
Neil

Similar Messages

  • Same number range for two different series groups?

    Dear all,
    There are two scenarios
    1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
    2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
    But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case)  as per excise legal requirement
    Ie running number is for series group 20 is 300016
    For the above deemed exp case (second scenario)it should pickup 300017
    And again when they do under bond case(first scenario), it should pick up 300018 like that
    Is it possible to maintain the same number range for two different series groups(20 and 30)?
    Even if you maintain the same number range for 30, as per running number range of 20
    Will the system update simultaneously the same number range for 20 and 30 series groups?
    Please suggest the way.

    With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
    Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
    Regards,
    Aroop

  • How to use same RESULT SET for two different events

    hello friends,
    I need to use same result set for two different events. How to do it.
    here My code,
    private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
    // TODO add your handling code here:
    try
    String selstate,selitem;
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
    selstate="select * from tab_places where state=?";
    PreparedStatement ps=con.prepareStatement(selstate);
    ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
    ResultSet rs=ps.executeQuery();
    if(rs.next())
    jTextField1.setText(rs.getString("place_ID"));
    jTextField2.setText(rs.getString("place_name"));
    jTextField3.setText(rs.getString("category"));
    byte[] ba;
    ba=rs.getBytes("image");
    ImageIcon ic = new ImageIcon(ba);
    jLabel6.setIcon(ic);
    in=true;
    catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
    catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
    Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
    private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
    }  how do i get dat resultset,
    help me out

    One post wasn't enough?
    {color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
    db

  • How to link the same horizontal page for two different vertical pages without duplicate them?

    Hey guys,
    Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
    I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
    Thank you all

    Confusing But interesing.
    I think it's possible. I have a idea. It will need one advanced trick.
    To explain it, I need test simply haha.

  • Using Same Bank Account for two different company code

    Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
    Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

    The system will allow the same ABA and bank account on two different company codes.  However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes.  The EBS program uses the house bank/account ID tables to assign a company code to the bank statement.  If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
    Regards,
    Shannon

  • How to Use Same Navigation Panal for two different query

    Hello,
    My requirement is I have to display three different report in same web template in three different tab.
    I have created a custom web template with tab.
    in each tab i have assigned three different analyser table and assigned three different report in each data provider. once I run the report that works fine, each tab is displying each report seperately.
    The problem I am having here with navigation panal. Navigation panal is working ok for 1st report, but when I go to the 2nd  tab for  2nd report nev attribute itself is not displying. is there any special setting that i am missing?
    If any one know about the same pls help me
    Thanks
    Samit

    Hi
    When u select the Generic navigational block to ur template. select that and right click go to properties, in the lift side of u web item will come in that last but one option is Affected data providers is there double click on the list u will get the option
    Shashi

  • How can I define same Price Conditions for two different Sales Deals ??

    I need to define for the same price condition, lets say ZPMP, two different values or condition records, for two different sales deals and the same valid dates
    For example, Sales deal 1, ZPMP equal to USD 15 and valid dates from 04/15/08 to 04/30/08.
    Another condition record for Sales deal 2, ZPMP equal to USD 20 and valid dates from 04/15/08 to 04/30/08
    How can I do this.
    Thanks in advance.

    While creating condition tables, you have the option to create different key combinations. So if you want the system to take different condition records for different sales deals, there has to be a point of differentiation between those 2 sales deals.
    This can be done in one of the following ways:
    by giving customer specific prices
    by giving material specific prices for a particular customer etc
    All this can be defined as different key combinations while creating the condition tables. For each key combination, you can specify different condition records, so that the system is able to pull prices according to the requirement.
    But if the sales deals are entirely similar (that is even the validity dates, delivery dates etc are also same), and there is no differentiating factor, then you will have to manually input the prices.
    Do get back if you require more clarification. Please reward points if useful.
    Regards,
    Swapna

  • Same Apple ID for two different country accounts?

    Is it possible to use just one Apple ID for two different iTunes accounts? I've recently located to Australia from the uk and want to run an iTunes Store account in each but with just one apple id and email address. Can it be done?

    You have to be in a country to use its store (and an account can only have one billing address on it), so whilst you are in Australia you can only use the Australian store, you cannot use the UK store (including redownloading past purchases). You can either update your billing address on your existing account to have your Australian address on it, or create a new account with your Australian billing address on it
    Changing country on an account : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support.

  • Same cost booking for two different cost center

    i am facing a problem.
    the problem is that here same cost is book under two different cost center @ the ratio of 50%.
    how it is possible.

    Hi,
    What i understand from your question is that in one FI document there are 2 cost center against same cost element with 2 different line.
    If it is so then it is correct.
    User has enter same cost element twice and enter different cost center and dividing the cost equally.
    Regards,
    Shayam

  • Can i use mail for 2 different email accounts?

    I use my MacBook as a work computer and a home computer.
    I dont really like Office for Mac.
    Can I use Mail for work email and home email ( 2 seperate accounts )

    Absolutely, you just need to add and setup the second account in the Preferences menu.

  • Content Conversion- Same keyfield value for two different sub structure

    Hi,
    I have a scenario where the key field value for the 2 substructure of record structure is same.
    MY XML structure is like this :
    <documentName>
       <recordset>
    <Header>
        <field-nameA1>
        <field-nameA2>
        <field-nameA3>
    <ITM1>
       <field-nameB1>
       <field-nameB2>
       <field-nameB3>
    <ROW1>
       <field-nameB1>
       <field-nameB2>
       <field-nameB3>
    <ITM2>
       <field-nameB1>
       <field-nameB2>
       <field-nameB3>
    <ROW2>
       <field-nameB1>
       <field-nameB2>
       <field-nameB3>
    The sample text file is given below where line no. 3 and 5 are different substructure(For ROW1 and ROW2 respectively) with same keyfield value.
    "HDR",399,"file",20050302,100642,3289
    "ITM1",2,3,4,5,6,7,8,9,10
    "ROW",3,4,5,6
    "ITM2",2,3,4,5,6,7,8,9,10
    "ROW",7,8,9,10
    After content conversion I get a XML structure in which there is no ROW2 and all data within the fields of ROW2 are put under ROW1 as the key field values are identical.
    In the records only the first field is constant (e.g. ROW).
    How to handle such a scenario?
    Regards
    Satish Chauhan

    Unless you can somehow expand the key, I don't know that this is possible.  The key implies uniqueness - and in your case, unfortunately, it isn't.  Is there any way to edit the structure to make it more unique for you?  Do you have any control or ability to change that?
    Maybe if you add unique keys in your mapping, you can strip them off with content conversion on the way out using the parameter keyFieldInStructure=ignore?

  • Mail sending from different person's name. Help!

    Hi! This problem is a little confusing…I’ll try to make it as simple as possible.
    I’ve gone through dozens of threads and still can’t find an answer for this.
    I have my work email set up on a Macbook. I’m the only one who uses the Macbook. The address is [email protected] and the name associated with the account is "My Name." This is the same for all my coworkers. Example: Coworker’s Name <[email protected]>
    Until recently, when I sent an email recipients used to always see my name followed by my address in the “From” field (My Name <[email protected]>).
    Now when I send an email, people see my coworker’s name in front of MY email address (Coworker’s Name <[email protected]>). His actual address is [email protected] I have never sent an email from this address. I can’t even log into his account.
    And now, in addition to seeing my coworker’s name in the “From” field, if someone composes an email to me it comes to my address, but even I now see it as To: Coworker’s Name <[email protected]>. At first this was only happening to one person. Now literally everyone who emails me sees his name paired with my address.
    I’ve tried clearing out the previous recipients list, updating all names in my address book, making sure the account is named properly in settings…everything. Please help!!!

    I should add that until today, the sending address read as
    Anne Leader <[email protected]>
    Thanks.

  • Ability to set same Start date for two different discrete Job in ASCP

    We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
    E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
    ATO_Model2*325325, the rolled up LT=3
    So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
    Hoping for your expert advice.
    Thanks
    Edited by: user604737 on Nov 10, 2010 9:55 AM

    Hi,
    964188 wrote:
    It is a date
    Such as
    10/31/2012 11:55:03 PMThen, as Hoek says, you don't want TO_DATE. For example:
    WHERE   TRUNC (start_datetime) = TRUNC (SYSDATE - 7) or the more efficient
    WHERE   start_datetime >= TRUNC (SYSDATE - 7)
    AND     start_datetime <  TRUNC (SYSDATE - 6)Also, it doesn't look like the EXISTS sub-query is corelated to the main query. That's almost certainly a mistake.
    If you're still having trouble, post your revised query, a little sample data (CREATE TABLE and INSERT statements). Point out where that query is givimg the wrong results, and explain how to get te right results.
    See the forum FAQ {message:id=9360002}

  • Same error code for two different errors

    I have a simple state machine with a few states, two of which are read ini file and read GPIB data. I also have an error handling state where I would like to handle all errors. Errors are checked for on each iteration of the loop, passed by shift register. However, I can't just unbundle the error cluster and wire the error code to a case structure because if the ini file doesn't exist (error code 7) I want to exit the program. But if I get error 7 from the gpib (Nonexistent GPIB interface) I want the program to continue running. What is the best way to track where the error is coming from so I know how to handle it when two error codes for different errors have the same error code value?
    Message Edited by for(imstuck) on 01-27-2010 03:47 PM
    CLA, LabVIEW Versions 2010-2013

    Another option is to check the existence of the file before opening the config file, then exit the program if nessecary. Relying on error codes might be a bad option.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Having the same itunes library for two different users on the same computer

    ok guys i've looked at the previous topics and replies to this subject. None of these seem to work for me with itunes 7. When I go to itunes and edit-preferences-advanced-change, the only folders that are recognized is all of my personal folders and none of my shared folders with my other user. Please tell me how to do this! i need step by step instructions please--I am new to itunes

    i seen that link on another discussion. I have tried it and that does not work. I transferred the itunes music folder (not the others per the directions) to my shared folder. When I go to preferences-change, my shared folder isn't one of the folders to pick from. When i moved the itunes music folder to the shared folder--another empty itunes music folder is created. is there another way?

Maybe you are looking for