Same environment - different prints

Hello,
I've got an issue with a print, a CAD drawing where different lines are missing. Funny thing: another installation (same hardware, same adobe version) does it properly. Settings seem to be the same.
It's not a general problem! Other documents work fine. Was hoping that an update (10.1.3 to 11.0.0) might help, but but it didn't.
When I use foxit instead of adobe reader it works!
Now I'm thinking to completely clean the settings to default. How can I do that? Is there an option (preferences) or do I have to delete certain files?
BR
Michael

It shouldn't be a problem to share environment variables between environments.
But, you may run into variable-dependency problems very quickly like, for e.g.,
FORTE_ROOT, FORTE_NS_ADDRESS, FORTE_GC_SPECIAL which you may want to have
different values in each environment. Not to mention that it's even more
confusing when the same application is running in two different environments and
expecting different values in some application-specific variables on the same
machine.
You are better off by launching the environments with two different logins on
the same machine. This would reduce the interdepedencies.
Hope this helps.
Jagadish
Sanjeev J Arab <arabsdteenergy.com> on 11/09/2000 07:24:57
To: forte-users <forte-userslists.xpedior.com>
cc:
Fax to:
Subject: (forte-users) Same Environment variables?
Hi,
I am creating two environments with two different versions of Forte on
same server, can we keep all the environment variables same except port
number. Will this create problems in future if we have to connect the
environments? As usual your help is appreciated. Thanks.
Sanjeev Arab
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Similar Messages

Same specs different print results - hp 130 mac versus PC

ok, the hp tech support has been no help in this all year.
Using the most current drivers, updates, ect.
Using the same printing specs on preview or acrobat (mac) and acrobat (xp, or 2000 on fusion or parallels), I get totally different print quality results. The mac substantially inferior to the pc printing.
I'm really trying to wean myself from using the PC partitions at all, but printing is really bad using the mac side. ALL OTHER FACTORS ARE EQUAL. same paper, same quality specs, just different results. After trying to get HP support to verify, they said it was a leopard issue. I don't recall any issues using the Tiger OS from Macbook, but can't be sure.
Anyone else having print issues with HP from mac to PC?

Sam Beaver wrote:
ok, the hp tech support has been no help in this all year.
Why does this not surprise me?
Using the most current drivers, updates, ect.
Using the same printing specs on preview or acrobat (mac) and acrobat (xp, or 2000 on fusion or parallels), I get totally different print quality results. The mac substantially inferior to the pc printing.
I'm really trying to wean myself from using the PC partitions at all, but printing is really bad using the mac side. ALL OTHER FACTORS ARE EQUAL. same paper, same quality specs, just different results. After trying to get HP support to verify, they said it was a leopard issue. I don't recall any issues using the Tiger OS from Macbook, but can't be sure.
Anyone else having print issues with HP from mac to PC?
Which kind of 'HP 130'? In any case, go to <http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs> and see if your printer is on the supported list. I've found that those drivers work much better than the ones which ship with the printer, _despite being developed by HP employees_. Why HP doesn't ship those drivers instead of the dreck they do ship is something you'd have to ask them.
These guys <http://gimp-print.sourceforge.net/MacOSX.php3> also have drivers which are better than the ones that ship with HP's printers. Check them out and see if your printer is supported.

Two SAP systems, same smartform, different print outputs

We have two SAP systems, because of the different business areas that our company has.
We develop a smartform with a custom style which has Gill Sans MT as default font. The smartform is printed directly into PDF format.
On system A on all environments it works fine and we transported it to system B.
On system B the output on PDF format comes in bold, all the characters are bold. This happens on all environments. On preview we don't see bold font but the spacing between characters is larger than expected (for example, a date is printed in two lines of a cell).
I've checked the settings on SE73 and they are the same on both systems.
I've also created a second style were I've taken out all bold settings. On system A, the smartform' style was changed to this new one. The changes were transported to system B, and still it prints all bold.

Thanks for the replys. I think this is an answer to both.
Checked SPAD and differences are:
1. output device LOCL:
System A:
- Device Type: ZSAPWIN
- Host Spool Access Method: F
System B:
- Device Type: SAPWIN
- Host Spool Access Method: G
2. Device Type:
System A:
- has two custom formats (none used on this specific smartform)

Pdf printing not same in different printers

Hi,
We have a pdf file which different departments would be printing on different printer but on a pre-perforated sheet. But while testing we noticed that the pdf is not being printed same in all the printers. Can we force this somehow? Thanks for your suggestions.
Thanks.

Have you looked at the page scaling in the print dialog?

Priting same SAPscript form on different printer: different results

Hi,
my client has different printer models and is claiming now that the forms appear different.
Do I have to create a SAPscript form for each printer type?
Is there a way to use the same form for all printer models?
Would we have the same problem using SMARTFORM?
Thanks for your help in advance!!!
thomas

Hi.
You should not have one SAPscript for each printer type. Thats not really a good idea. I would first of all try to do some tests with different device types on your output devices.
I don't think converting to SMARTFORM is the way to go if you don't feel like you have to. It is much easier to experiment with the device types.
BR
Niklas

Can PO output in different printer at the same time ?

Hi,Expert
Can PO output in different printer(one is local ,another is printed in SH office) at the same time when created ? and how to config the output type ?
please kindly advise . .

It is not possible to print on two printers at a time.

Same as Source Printing from Acrobat 9

Hello Everyone,
I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavior in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
-Original PDF file
Raster RGB - 191,45,47
Here are the numbers that are submitted by Acrobat, captured by our RIP:
-Acrobat 7 Same As Source
Raster RGB - 191,45,47
-Acrobat 7 Printer/Postscript Color Management
Raster CMYK- 0,244,245,0
-Acrobat 9 Same As Source
Raster CMYK - 0,242,251,0
-Acrobat 9 Printer/Postscript Color Management
Raster CMYK - 0,242,251,0
-Acrobat 9 Acrobat Color Management
Raster CMYK - 17,248,245,1
So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
(This is also posted to the Color Management forum, as it is both a color management concern generally, and an issue specificly related to Acrobat.)
Matt

We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
1. The file sizes differs, which suggests that there is a difference right off the bat.
2. The printed artwork differs visually, which is troublesome.
3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
a.       Acrobat 7
i.      RGB – Line 3342
ii.      CMYK – Line 3400
b.       Acrobat 9
i.      RGB – Line 8406
ii.      CMYK – Line 8468
4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
Matt

Changes to Same as Source Printing - CS4

Hello Everyone,
I'm in the process of testing CS4 for deployment to a large print production environment and I'm seeing some interesting behavoir in so far as it's handling of color management is concerned, specifically with Same as Source printing from Acrobat.
I currently have CS2 deployed, and we're using InDesign for page composition. We primarily accept Adobe RGB (1998) and US Web Coated (SWOP) artwork. PDFs are created from InDesign via File > Export, and we have it configured for "No Color Conversion" and "Include all Profiles." As such, our PDFs contain both RGB and CMYK artwork, all of which is tagged with an ICC profile.
In Acrobat 7, we submit these files "Same as Source" to our RIPs (Fiery and Wasatch) in order to preserve the embedded profiles. All of our color management is handled at the RIP. This works quite nicely. We have tested the submissions and the RGB and CMYK builds (color numbers) come through dead on.
With Acrobat 9 Same as Source submissions, we are seeing that the builds are changing, and that we are getting a conversion to CMYK.
-Original PDF file
Raster RGB - 191,45,47
Here are the numbers that are submitted by Acrobat, captured by our RIP:
-Acrobat 7 Same As Source
Raster RGB - 191,45,47
-Acrobat 7 Printer/Postscript Color Management
Raster CMYK- 0,244,245,0
-Acrobat 9 Same As Source
Raster CMYK - 0,242,251,0
-Acrobat 9 Printer/Postscript Color Management
Raster CMYK - 0,242,251,0
-Acrobat 9 Acrobat Color Management
Raster CMYK - 17,248,245,1
So the question is: What changes have been made in Acrobat 9 to cause for it to handle Same as Source print submissions differently? Why is it that our builds are changing when Same as Source has always been how we get "pass through" color from Acrobat?
Has anyone else run into this? From the perspective of a RIP-driven, color managed workflow, this is a serious issue, no?
Matt

mattrichards wrote:
I hope that the suggestions that this group is dead are wrong...
We’ve done some further investigations into the differences in Same as Source printing from Acrobat 7 and Acrobat 9. For our tests we created a simple InDesign file with two red vector rectangles, one defined as Adobe RGB (1998) and one as U.S. Web Coated (SWOP). This file was then exported to PDF with “No Color Conversion” and “Include All Profiles.” The resulting PDF contained both rectangles tagged as specified, as verified with PitStop.
We then opened this PDF in both Acrobat 7 and 9 and printed to PS files (at the time, the queue for our HP5500PS was selected). Our cursory findings are:
1. The file sizes differs, which suggests that there is a difference right off the bat.
2. The printed artwork differs visually, which is troublesome.
3. In both instances, when opened in Notepad2, the page objects appear to be tagged properly with Adobe RGB and SWOP specified as the objects color space. This, on the other hand, is good.
a.       Acrobat 7
i.      RGB – Line 3342
ii.      CMYK – Line 3400
b.       Acrobat 9
i.      RGB – Line 8406
ii.      CMYK – Line 8468
4. And here's the biggie: When the PS file created from Acrobat 9 is opened in Illustrator, it says "The document does not have an embedded RGB profile" and it allows for the specification of an RGB profile ONLY. When the PS file created from Acrobat 7 is opened in Illustrator, it says "This document contains objects using both CMYK and RGB color modes. Illustrator allows only one color mode per document. Which color mode would you like to use?" Of course, this PS file SHOULD contain mixed color modes (because it came from a mixed color mode PDF), but only the PS files from Acrobat 7 do. The PS files from Acrobat 9 do NOT. This suggests to us that the PS files (and therefor print data submitted to PS queues as Same As Source) created by Acrobat 9 are not honoring the embedded ICC profiles of tagged artwork.
Does anyone out there have any thoughts or experience? If what we are finding is true, this is a major problem for Adobe's Acrobat 9 print engine.
Matt
Matt,
I think I see why you need PS, maybe to get proper device orientation?
I downloaded your PS files and distilled. The Acrobat 7 is all mystery meat. The Acrobat 9 is calibrated.
It looks like 9 is preserving all the tags, and 7 isn't. So the tags may be your problem. One option is decalibrating everything in Acrobat 9 but it's an extra step.
Maybe Don't Include Profiles out of ID would solve your problem BUT
To me it looks like 9 is doing the right thing (preserving tags), and 7 isn't. Generally you want calibrated output. Maybe your RIP is performing an extra unwanted conversion of the tagged content that's in the PS output from Acrobat 9...
Message was edited by: Printer_Rick - added "performing an extra unwanted conversion"

Setup different printer as default in different location in SAP via Citrix

hi all,
i have two location, where the user of SAP B1 uses B1 via Citrix,they have different printer at their respective location, i need to do the setup for two printer one for normal print anather for barcode printer.
Both have two printer in their respective location. how to make the printer setup on both the place in SAP B1, so that those two printer should come as default for both of them. here they have two different user access. but how to do the setup of printer on user basis, so that it can take the two printer as default, on both the location.
kindly suggest me some idea that how to do that
regards
sandip

Sandip,
I remember seeing this post from you before. I would urge you to follow up on your posts and check the replies before posting them again. This is mainly because if you keep posting the same questions again inspite of getting answers you might lose credibility in getting replies. I am saying this in your best interest.
Please see my reply for your previous message
As per what I know you can setup a default Printer for a document (PLD). Also for your situation you should save the same PLD with two different names and default one to each user. Now you have two PLD's for two of your users.
Open the first PLD template and from the design mode of PLD.
In the Top Menu
Print layout designer > Display document properties -- go to Paper format tab and select the Printer you want the document to print for this PLD user.
Do the same for the other user.
I am not sure how this will work in a distributed environment where you are using CITRIX. Please check with your Network associate.
Thanks
Suda

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

"Try Selecting a Different Printer or File Type" Error - iPad2 - Officejet Pro 8600 - ePrint error

Greetings...
I just got an Officejet Pro 8600 and I've been trying to get web pages to print using HP ePrint from my iPad 2 (iOS 7.0.6). I go into the ePrint app, go to web page of choice, and then click on my printer option to print. It renders on screen and then throws out the following error:
"Try Selecting a Different Printer or File Type" "Officejet Pro 8600 [5124FC] doesn't support this file type."
I can use ePrint from the iPad to print pictures from camera roll.
This only is problematic when I try to print web pages (I tried amazon.com for test).
I have no problems doing this from my iPhone...only the iPad.
I've tried rebooting device and trying again....same thing.
Anybody know how to fix this? I really want to be able to print web pages from my iPad.
Thanks in advance...
Possie

Hello Possie,
Thank you for the update. I have to say I'm surprised and disappointed that the uninstall and reinstall did not resolve the issue, especially since you can print the page from your iPhone.
I have spent some time researching this and working with my colleagues in HP's Cloud Services and we have a couple of suggestions/questions.
Do you get the same error when you try to print the web page using Apple's AirPrint feature?
Please ensure the iPad is connect to your home wireless network and try to print again.
Please try changing the settings in the ePrint app before printing the web page. Please ensure that the paper quality is set to normal (see screen shot below) and that the paper size is set to letter (see 2nd screen shot below).
Please let us know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Does the object in BO repository the same in different BO version?

Hi Guys,
Does the object in BO repository the same in different BO version or in different type of Database?
One of my customer said that the objects(index, procedure, table ,view, etc..) are different between their TEST and PRO environments.
Your help is appriciated.
Thanks.
Regards,
Daniel

Hello Daniel,
The BO repository or CMS database has a different database structure between versions of the CMS database. So if you have BO XIR2 versus XIR3, then they have different database structures. If the customers has a one version of XIR2 in TEST and it is a different version like XIR3.1 in PRO environment then that would make sense. Each version of the XIR1, XIR2, XIR3 has a different database structures for the CMS database. I hope this answers your question.
Regards,
Jorge

How to make different print jobs from one PC

Hi
We have a problem to make 2 different print jobs at same printer with one PC.
We use Adobe Acrobat X Standard or Acrobat Reader 9 both no sucess.
we want following
1. print A4
2 Print A6
Program find out itselw when to print A4 or A6 from different location at the same printer or at 2 different printers.
Bothe print 1 and 2 is PDF file.Print 1 is for invoices - print 2 is for labels
Is that posibel with Adobe?
BR
Flemming

Hi and welcome to the RoboHelp forums. You may be better placed to ask this question on the Acrobat forums as I expect knowledge about printing PDFs would be limited here. However I suspect that you'll need to set-up different Print Options inside Acrobat to do what you want. This is not my area of expertise though.
The RoboColum(n)
@robocolumn
Colum McAndrew

Do we have different Print Programs for printing Cheques in Different Lang

Hi Peers,
I have requirement of Cheque printing in SPANISH Language.
We have been using Program RFFOUS_C (International Payment Medium - Check (with check management)) for printing Cheques in French & English.
This same print program does not work with the Spanish Script ZF110_ES_CHEQUE which is copy of French script.
I am wondering if we have to use a different Print Program (RFFOES_T) or is it the issue with the data & configuration.
Could you please clarify.
Thanks in advance!
Regards,
Daniel

Hi,
Thanks for the suggestion!
The Print Program set in FBZP is RFFOUS_C for the country Mexico.
The Print program works well in Client DCO100 but the same printprogram when used in DCO101 doesn't work for the Mexico script.
The Mexico script is also a copy from client DCO 100 . In the this Mexico script I have changed the currency & Defined language as 'S' at some places .
The payments are processed but no Spool requests are generated.
Thanks,
Daniel

Same Environment variables?

Hi,
I am creating two environments with two different versions of Forte on
same server, can we keep all the environment variables same except port
number. Will this create problems in future if we have to connect the
environments? As usual your help is appreciated. Thanks.
Sanjeev Arab

It shouldn't be a problem to share environment variables between environments.
But, you may run into variable-dependency problems very quickly like, for e.g.,
FORTE_ROOT, FORTE_NS_ADDRESS, FORTE_GC_SPECIAL which you may want to have
different values in each environment. Not to mention that it's even more
confusing when the same application is running in two different environments and
expecting different values in some application-specific variables on the same
machine.
You are better off by launching the environments with two different logins on
the same machine. This would reduce the interdepedencies.
Hope this helps.
Jagadish
Sanjeev J Arab <arabsdteenergy.com> on 11/09/2000 07:24:57
To: forte-users <forte-userslists.xpedior.com>
cc:
Fax to:
Subject: (forte-users) Same Environment variables?
Hi,
I am creating two environments with two different versions of Forte on
same server, can we keep all the environment variables same except port
number. Will this create problems in future if we have to connect the
environments? As usual your help is appreciated. Thanks.
Sanjeev Arab
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Same environment - different prints

Similar Messages

Maybe you are looking for