Same file name - Different extension - Viewing problem

I know this has been written about quite a bit and I have searched through the posts but I cannot find a solution to my problem. I shoot RAW, import then into Lightroom, make changes, import into CS3 & make more changes, save as a .psd file; no problem so far. I use Neat Image on some files that need the noise reduction so in CS3 I save the .psd as a .tif, run it through Neat Image and save it to the same directory where the RAW and .psd files are. Go back to Lightroom and no .tif file. If you "find" the file in Lightroom it shows up but shows as the .psd file. I have tried unstacking and everything else I can think of but I cannot make the .tif file display. I can go back to CS3 and locate the file through it but if in a few months or however long it takes me to forget that the .tif is there, the .tif will be lost in never never land. Bottom line, how do I get Lightroom to show ALL files, no matter name, extension, etc?
I am using Version 1.3.1 on Windows XP, 2Gigs ram, 3.4 Gig P4 processor

This issue was argued down to skeletal remains in beta and after. Adobe finally rlented somewhat and allowed the importation of files with same name and the RAW and jpeg extensions, because for one good reason some cameras produce both and some shooters utilize both for differring purposes.
Jao,
I will disagree with your reading of what is standard. That MS's stupid explorer or anything else won't show extensions is immaterial. First, anyone wanting to work at any speed and efficiency will be using something like Total Commander instead of Explorer, and it and virtually every other app I own shows extensions and treats files with the same name but differing extensions as unique files unto themselves--as it should be.
After all it is digital data in the file that is unique. The extension is a tag to tell you and the computor how to deal with that data. The content is not identical, and therefore it ought not be treated as if it were by any application.
Anyone with an interest in wasting several hours can trace the arduous wailing at the LR team to treat the extension as part of a unique name. As I said bdefore, they did make some concessions. Hopefully, they will go the whole distance soon.

Similar Messages

  • Can't import RAW and psd file with same name different extension

    Trying to import a folder of images from desktop that I have been working with in Bridge CS3.
    LR won't import a RAW file that has a PSD file by the same name. Tried renaming the PSD and deleting the one with the same name, but says it is still there and won't import the RAW file - What is the correct workaround on this? Why can't it import same name files with different extensions?

    A forum search for 'RAW + JPEG' will give you more posts on this than you care to read. This will change. For now, import the RAW and PSD's from separate folders and then move them together for within LR.
    LR is seeing the RAW as a sidecar to the PSD. It is an unforseen effect of the RAW + JPEG thing where they decided to not import the JPEG, seeing it as basically a preview image for the RAW.
    LOL
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Different photos with the same file name!! How to change this?

    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?

    Celtic Mom
    Welcome to the Apple user to user discussion forums
    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?
    It sounds like you are using the finder inside the iPhoto library - do not do that - you will corrupt your library and lose the edits, keywords, etc that you have
    iPhoto does not care about duplicate file names - it handles it fine
    changing the title of a photo does not affect the file name - although when you export the photo you can use the title for the file name as an option
    What are you doing and what do you want to accomplish?
    Remember do not ever make any changes in the iPhoto library using the finder or any other program
    LN

  • When saving a File OS Is Creating Multiple Folders With The Same File Name

    Not sure what I changed but, now when I save a any file (ppt. word, Keynote,Pages e.g.,) to the desktop or any other location the OS will also create multiple file folders with the same file name as the file I'm saving. Inside the folders are what appears to be files locating the saved files. What can I do to fix this problem?
    I'm using the 10.7.2 version
    MacBook Pro

    Misio wrote:
    It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
    BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
    the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
    Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
    When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
    Please advise.
    it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
    check the info panels for the files for full names to verify if this is the case.

  • Can I import 2 sets of photos with the same file name numbers?

    I've inadvertantly not had my camera set to "continuous" for file names and now have 2 memory cards with 2 different sets of images with the same file names.
    Can I still import both into Lightroom 2 without problems?
    What are the consequences?
    Thanks
    Stuart

    Yes. Of course, two files with the same name cannot be in the same folder. And don't forget to uncheck Don't import suspected duplicates during import.
    Another thing is that's not a good idea for good asset management, because someday you'll make some mistake because of this ambiguity. Good DAM practices suggest renaming your files after or during import, so that each files has a unique name across your entire image archive.

  • Automatically replace jpgs with tiffs of the same file name.

    Is there a way to relink automatically files replacing jpgs with tiffs of the exact same file name?
    Thank you!

    http://indesignsecrets.com/relink-from-one-image-file-type-to-another.php/comment-page-1
    Relink from One Image File Type to Another
    by:  David Blatner  | February 20, 2009
    18 Comments
    Share This
    Eugene asked an excellent question in the comments to this old post:
    Say if I do decide to change the .tif to .psd and I move the .tifs out to another folder, would it or would it not be a good idea if Indesign said, “Hey, those .tifs aren’t available, there’s a similar name with a .psd extension, would you like to use these instead?” Then you just press, yes use my .psd files.
    Many folks had asked for this ability, and so Adobe delivered: InDesign CS4 has a feature called Relink to Folder. It’s an awesome command (it lives in the LInks panel menu) because it basically directs InDesign to some other folder on your computer (or server, or whatever), where your images may live. So you can relink a hundred images from one folder to another quickly.
    But even cooler, you can tell InDesign whether to insist on the same file type or use a different one. Here’s the control in the Relink to Folder dialog box:
    So, you select one or more images in the Links panel, choose Relink to Folder, tell it which folder to look in, and choose a file extension. The original image doesn’t even have to be “Missing”! In fact, the two images (psd and tiff, in your case) can even live in the same folder.
    Sweet, yes?

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • Files with same file name in IFS

    Hi,
    Does anyone know if, as IFS uses a "reference model files system", it is possible to store in the database 2 files with the same name (I'm talking to unfoldered files, but I suppose it will be the same for foldered files). If yes, how can I make the difference between the two files using the java api ?
    Thanks in advance,
    Roger.

    Of course Yes, it's not a problem to store two files with the same file name... but they can't be foldered in the same folder.

  • Keeping same file name possible in Compressor 4.1.2?

    Is keeping the same file name possible in Compressor 4.1.2?

    Click twice in the File name field and you can change it. Of course, you need to save it to a different location than the source file.
    Russ

  • Downloads with same file name override each other

    This happens with large files and/or slow connection.
    - The default limit is loading 2 files at a time.
    - Suppose the user is currently loading A.txt and B.txt
    - While loading, user also clicks http://url1/C.txt and http://url2/C.txt (different URL but same name), and they are added to the queue.
    - Firefox loads both of them into a single file, they should be separated instead (C.txt and C-1.txt)

    Celtic Mom
    Welcome to the Apple user to user discussion forums
    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?
    It sounds like you are using the finder inside the iPhoto library - do not do that - you will corrupt your library and lose the edits, keywords, etc that you have
    iPhoto does not care about duplicate file names - it handles it fine
    changing the title of a photo does not affect the file name - although when you export the photo you can use the title for the file name as an option
    What are you doing and what do you want to accomplish?
    Remember do not ever make any changes in the iPhoto library using the finder or any other program
    LN

  • I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it show

    I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

    I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

  • Same file name in target as source file

    Hi,
    I am doing a file to file scenario in which there is no mapping involved, it is a bypass scenario.
    I want my target file name to be exactly same as the source file name.
    Source file name dynamically changes based on date and time.
    I have tried creating the target file using the Add timestamp characteristic. But it is not in the same format as the source file.
    How can I achieve this???
    Since there is no mapping invlolved, I can't use dynamic configuration or variable substitution.
    Please advice.
    Regards,
    Sachi

    Hi Sachi,
    -->Are you bypassing the mapping rite....?
    -->Then in your ID under Interface determanation what interface mapping did you maintained....?
    -->I think you are by passing the IR.
    -->I think this can be achived by using the ASMA but it requires the Mapping Program.
    -->Even the above blog explains about getting the same file name using the ASMA and UDF.
    Thanks

  • DMS - file name and extension

    Hi everybody,
    I will appreciate if somebody could tell me how to read the file name and extension of already uploaded to DMS document (a function module will be best but name of db table is ok too). Is this information stored in SAP DB at all?
    Thanks
    Ogniana

    Check
    http://help.sap.com/saphelp_erp2004/helpdata/en/c6/893d55449311d1893e0000e8323c4f/content.htm
    Regards,
    Santosh

  • SFTP to Mail with attachment as same file name from sender side

    Hi All,
            I am Using a SFTP to Mail scenario, I have a requirement in which an Sftp adapter after picking up a file should have an attachment with same file name to the Receiver Mail Adapter.
    Can anyone help me out?
    Thanks in Advance
    Edited by: uday kumar on Feb 15, 2009 2:00 PM
    Edited by: uday kumar on Feb 15, 2009 2:02 PM

    Hi,
    Find below link will helpful for configuration, but as per my knowledge file name at attachment will take as message id.  Check it with below link, i hope it will work
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure

  • Same file name from sender to receiver file adapter with out using UDF

    Hi All,
    I am working on FILE TO FILE. My requirement is same file name from sender to receiver file adapter. Is it possible to do using only Adapter Specific message properties?  i mean with out using UDF.
    Thanks
    Karthik

    Hi,
    >>>Is it possible to do using only Adapter Specific message properties?
    yes
    just enable Adapter Specific message properties in sender and receiver channel for file name
    and you're done
    Regards,
    Michal Krawczyk

Maybe you are looking for

  • How to see html code in a php file using CS5.5 without using testing server?

    In CS5.5 when I open a page with php extention, DW does not show any html code in design view without me having to set up a testing server. In DW 8 it would open the same files and show me the html in design view. I have no need to test php code, I j

  • Report output via E-mail

    Hi all, i have a written a report where i need to send the report output to somebody via E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>. i want , th

  • Can I log into Game Center with my Apple ID on another phone

    I'm tryin too use another iPhone too log into Gamecenter but I can't figure out how too log out the id that's in it now

  • Musical Typing problem

    Hello there, I just started to use mainstage without a midi controller keyboard. I'm using the musical typing feature to listen to the bank of sounds. When i type something like a F#7 chord ("t", "u", "o", ";") i cannot hear the four notes together (

  • EX2013 - Remove recurring room reservations from a terminated Meeting-Happy user

    Here's my situation: User-A loves meetings! (don't we all?) User-A loves making recurring meetings! (that last till the end of time) User-A gets terminated (so sad) User-A's manager would like me to delete all these meeting's and free up room resourc