Same file, same date - different file!

I've just begun to use Pages with iCloud.
Looks like a bad mistake ...
I have my iCloud window open in Safari showing a file with the time stamp 17.16. I have my iPad open with the time stamp 17.16. The document was edited on the ipad at 17.16, but the file in Pages on my iMac (presumably taken from iCloud which was taken from the iPad) is different.
The iPad file is not showing 'updating', everything is connected to the internet.
is there any way to 'force' a file on my iPad to update? (Like 'Force Quit' ... )
I would email it to myself and drop it into Pages but since starting iCloud I haven't been able to send email from my iPad, only receive.
Any help gratefully received
Stuart

I should add at this stage that I am VERY nervous about deleting files to re-install as I presume that if I delete a file from my iPad it will also delete on every other device.
Unless it is a local version, apparently - how do you tell if it's a local version or an iCloud version?
Additionally, I downloaded the file again from iCloud (which said 17.16 update time) and when I opened it in the Downloads folder it was in fact a 9.05am version!
What's going on?

Similar Messages

HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer. I would like to have my pictures in i-photo because it syncs them to my ipad.
I want to download the pictures from my camera to camara window, and then drag and drop the pictures to i-photo. If I keep my pictures in both programs would I be wasting space in my computer hard drive by having the same pictures in two different files?

Yes.
Ignore the Canon software. It gains you nothing and adds complexity. Just use iPhoto for the lot.
Regards
TD

Adobe Captivate Collaboration – Same Comments Appearing in Different Files

Hi All,
I am having problems with the collaboration process. I reviewed a file yesterday and today I went to review a different file and it has the same comments I created in the other file yesterday.
More details:
I sent a captivate file to a collogue to review using the collaboration process (file > collaborate > send file for shared review). I choose to collect comments via my internal server. I made two new folders
one for comments and one for review. My collogue made comments and exported the file back and everything appeared fine, however today I sent my collogue anther file to review using the same process as above and she sees the same comments she made on my other file yesterday.
Why are the comments on one file appearing in the other file before it is even reviewed?
I can not find anyway for the comments to be deleted as a work around either.
If anyone has any ideas it would be greatly appreciated.
Thank you
Amanda

Amanda-
Have you had any luck solving this issue? I have five *.CREV files that have been reviewed by two people and for three of the lesson that one person commented on, all of their comments are the same even though they are in separate folders. I also have the issue of comments appearing when it is a brand new file. Thanks for any followup info you can provide.
-RoseyH

Importing Markers to the same track from 3 different files

Hi all,
This is a marker question:
I have about 60 minutes of video and I originally have it in 1 big file (export from FCP, then compressed with chapter marker so that they will be imported into DVDSP). I have no problem with importing the markers from FCP->Compressor->DVDSP.
I broke up 60 minute file into 3 smaller files (so that I don't have to re-export/compress the whole 60 minutes worth of material when I do revisions). However, when I try to import these 3 smaller files into the SAME track, only the first one that I import carries over the chapter marker, the 2nd and 3rd don't.
What can I do to get the remaining markers imported from the 2nd or 3rd files?
Any help appreciated!
Aa

Hi all,
Just figured it out: I right click on the clip and the choose "Import Embedded Markers". So that solves the problem. Just unsure why it didn't do it automatically.

Cannot find class in same package but in different file

I have following two source files. Both the file has same package statement as below
package java.buron.doeacc ;
But whenever i try to compile File: shoepolish.java ( mainfram.java compiled succesfully before)
following error message appear
..\..\buron\doeacc\shoepolish.java:12: cannot resolve symbol
symbol : class MainFrame
location: class java.buron.doeacc.shoepolish
          MainFrame mainFrame = new MainFrame();
^
..\..\buron\doeacc\shoepolish.java:12: cannot resolve symbol
symbol : class MainFrame
location: class java.buron.doeacc.shoepolish
          MainFrame mainFrame = new MainFrame();
^
Please tell me What is the problem and how it can be solved.
why cannot find the class that are in same package.
I have JDK 1.3
FOLLOWING ARE THE TWO FILES
File: mainframe.java/////////////////////////////////////////////////////////////////////
package java.buron.doeacc ;
import javax.swing.* ;
import java.awt.*;
import java.awt.event.* ;
class MainFrame extends JFrame
     private final String APP_NAME = "Shoe Polish";
     // constructor
     public MainFrame()
          super("Shoe Polish");
          setSize(500, 500);
          setVisible(true);
File : shoepolish.java
package java.buron.doeacc ;
import java.io.* ;
import java.buron.doeacc.* ;
class shoepolish
     public static void main(String args[])
          MainFrame mainFrame = new MainFrame();

The javac compiler uses the Classpath to find classes. If your directory structure is c:\myjava\buron\doeacc (for example) then you need to have c:\myjava in the Classpath when you compile. For example javac -classpath c:\myjava MainFrame.java

How do I separate pages in a file to create different files?

I have a two page file and want each page in its own file.

Hi,
If your file is PDF file then you can use Adobe Acrobat to extract the pages from the PDF file.
Adobe Acrobat XI Pro trial version can be downloaded from www.adobe.com.
1. Open your PDF file in Acrobat
2. Select "Tools" from top right corner
3. Select "Pages" tab
4. Select "Extract" then save the extracted page
Hisami

Display images with same file name and different file types.

I want to write a method, which receives file names (image1, image2, image3) but without the extension. This method will handle most of the image types (.jsp, .png, and ...) , what is the best way to write the method? Should I loop through all the image types for a given file name? I really don't want to do that...

Topcan5 wrote:
I want to write a method, which receives file names (image1, image2, image3) but without the extension. This method will handle most of the image types (.jsp, ..Since when are Java Server Pages an image type?
.. .png, and ...) , what is the best way to write the method? Should I loop through all the image types for a given file name?.. Sounds reasonable.
..I really don't want to do that...Why not?
As an aside, this entire task sound suspicious. Why on earth would you need such a method?

DirectoryFile & File - getting Date of file on Solaris 8

I'm trying to write a method that will clean up the old logfiles that are generated by the applications. When I use DirectoryFile.listFiles() and File.getUsageTime() - it does not return the same date/time that is on the normal "ls" in the "/uds50/log" directory. Any ideas of what the problem is or a better method to use?

I think writing a shell script would be a better solution. That's how we do it. Before we start up the node manager we also clean the log directory and archive it away. You can also shell out of Forte and let the shell script do the job. Just a thought.
ka

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

How to collect to different files into one message

Hi,
I have the following scenario:
Two (5Mb) Files with different file structures each ->
XI (transform and generate a single structure record) ->
Insert a record in a DB for each new record generated
Let suppose file1 has order headers - one order per line -and file2 has the corresponding order items - one item per line, e.g;
File 1
OrderNr Description
1        A
2        B
3        C
File 2
OrderNr   ItemNr   MaterialCode ....
1         1        111
1         2        222
1         3        555
2         1        888
2         2        777
3         1        111
Imagine I want to insert a record in the database for
each order/item like this
OrderNr ItemNr Description MaterialCode .....
1        1      A           111
1        2      A           222
1        3      A           555
My real scenario is a little more complicated but never mind for now.
I need to collect the two different files with two different file structures into the same message. Although I have read about the subject I am not sure about how to do it using BPM because there isn't any field I could use to correlate file1 with file2 - I can only correlate a record of file1 with several records of file2. I simply know that the two files will be available in a specific directory once a day at 06:00AM.
First question is:
How can I collect the two messages originating each from a different file into only one message with two different subtypes one for each file structure?
Because my background is ABAP I could do it with a workaround for temporarily storing the info from each file into database tables in XI and then correlate the info from the two files to generate a single message.
Like this
File1 -> XI -> INSERT DATA XI ZDB1 (via ABAP Proxy or RFC)
File2 -> XI -> INSERT DATA XI ZDB2 (via ABAP Proxy or RFC)
Them I could use an event to check when the two tables have all the data from both files. I could then combine the data from the two tables and start another integration process like this
XI SERVER (ABAP Proxy) -> XI Integration Server -> Third-party (JDBC)
But this way I would have to code the hole data conversion which is not a good idea from the perspective of XI (EAI/Broker).
Maybe I sould use BPM. But how?
Futhermore:
Is BPM performant enough (we are talking about files with thousand of records)?
Thanks in advance
Diz

Hi,
for N:1 Multimapping you have to use BPM.
After going through this weblog you will be quite familiar with how to collect 2 messages into one message.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Steps:
1. Create a abstract/ inbound / outbound interfaces. (in your case 3 /1/2).
2. Perform 2:1 Multimapping.
You can specify more than one message in either side.
Just go to message tab in MM.
3. Now follow the blog and you will get a output in the form of abstract interface.
4. Define JDBC reciever Channel as usual.
Your database will be updated.
Just try this out.
Regards
Piyush

How to create one file to 2 output files with a condition?

hello friends,
i have a scenario to split one file into two different files using a condition.
based on the account number ( 100's of accounts) i have to split the file into two. ex: acc# 1, acc#2, acc#3 goes into one file rest of the account number records goes into another file how to build the logic.
thanks
sri

Hi Sri,
One way-
You can achieve this with the help of Java Mapping..
In the Java Mapping, read input, parse the input while parsing the document , group the data into 2 structures and in the Interface Mapping use this java mapping. So here you have 2 target message interfaces..
Hope this helps,
Regards,
Moorthy

Comapre 2 same channels from two different dat filea

Hi ,
I want to compare the wave forms of two same channels names (in my sample data which is in attachment, the same channel names are S1KNSLLE00H3DSZP) from different dat file(S2100044 and S2100041) .
Load the 2 dat files from navigator.
Come to report and open two 2d axis systems to see the wave forms of two different channels ( Like in attachment result.jpg)
I need an autosequence to do the same for all the channels for 2 dat files automatically.
Attachments:
cmp.zip ‏1967 KB
result.JPG ‏158 KB

Hi RSH,
I appreciate you posting 2 data files and the jpg, but I'm afraid I still have lots of questions before I can advise you. You sent 2 *.dat files which each had 1 channel in them named "Data", which is different from your email text and the jpg you posted. Will your data sets typically have many channels in them? Your posted *.dat files had no time channel and the "Data" channel was not a waveform channel, yet the 2 different "Data" channels were different lengths. Do you want to plot your channels vs. the array index all the time (as is shown in your jpg)?
Do you want to have N sheets in REPORT, one for each channel? Why don't you want to have both "S1KNSLLE00H3DSZP" channels as curves with different colors on the same graph-- wouldn't that make it easier to compare them?
When you drag over the data channel onto a REPORT graph, you will get a reference like "[1]/Data" or "[2]/Data", which is exactly what you want to compare the "Data" channel from 2 arbitrary data files (note that the file name does not show up in the channel references). So it seems to me that the REPORT layout you sent a jpg of already satisfies what you're asking us to create for you. Why do you need a script at all?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to work with two different backend with same MI Server and war file

Hi All,
We have a requirement that we need to work with one Middleware for two backends. For that we had to copy MAM30 sync bo's to zsync BO'S with the name ZMAM30. Now both sync BO'S will point to different backends.
I have a standard war file which was working well with standards sync bo's. Now to work on zsync bo's what all the changes do I have to do in the standard war file(code).
As per my knowledge we have a file called "syncbonamelist.properties" which maps the sync bo keys. Also there is another file called "mapping.xml" file which maps the package name with BO name.
Can any body please tell me, are there any other files needed to be change like "meRepMeta.xml", other than any existing code like java objects are also needed to be changed.
Your help in this regard is highly appreciable.
Regards
Murthy

Hi Murthy,
I try to get my head around the question:WHY?
The reason for my question is, that this influences the answer!
Because of several reasons it is NOT possible to handle MAM and zMAM Bos at the SAME TIME on the SAME MACHINE in the way you describe it - and it makes no sence to do so at all! But anyway......
Lets say you have two backends, cause you have two different areas of the company. But both want to use the same MI server - but the client should be independend.
So you need two apps. One uses the MAM BOs and the second one uses the zMAMBos.
If this is the case, dev should be straight forward I think and you solution should work already......... so I ask myself, what is the problem you have? Do you get an error?
- First create a new MEREPMETA-XML with just the zMAMBOs instead of the MAM BOs.
- Change the two files you mentioned above.
This should be all then.
If you have a look into the implementation for MAM001Impl for example, there you find a line like:
private static final String SYNC_BO_NAME
= ResourceBundle.getBundle("com.sap.mbs.mam.bo.impl.syncbonamelist").getString("MAM30_040");
This takes the name from the properties file and maps it to the real BO. So changing the name in the property file to
MAM30_040 = zMAM30_040
will result in MAM uses the zMAM BOs.
Be aware: after you place the WAR file in the WEBAPPS folder and do a restart to deploy the file, you need to do a data reset to make sure the new MEREPMETA.XML is read.
AND: two apps! one for MAM and one for zMAM BOs. One APP is not possible! Cause if you have something like that in the properties file:
MAM30_040 = MAM30_040
MAM30_040 = zMAM30_040
if will only take the first reading.
But I think this is clear to you anyway
Regards,
Oliver

How to import a table which is in mdb file(same table in different mdb's)

Hello,
how to import a table which is in mdb file(same table in different mdb's)
e.g. table 'EMPLOYEE' is in 'test.mdb' the same table 'EMPLOYEE' is in 'current.mdb'
How this can be done on click of a button on my form if the path of mdb is provided?
Thanks

This question is not related with ora dev forms, its about Microsoft Access.
Use import option (File >> Get External Data >> Import)
or use TransferDatabase action.

2 different files in the same location?

When we upload files they go all in one folder.
The first editor calls his graphic "Picture 1.png" (wonder where that came from..)
Sure sometimes before the item gets deleted another one will upload an completly different picture with the same filename.
The thing that it different between the 2 would be the Asset ID. So I was wondering if there is a way to make folders with asset IDs in the location where everybody uploads there stuff to.
To tidy up on the long run I guess we just would need to delete the empty folders (as the content has been archived).
How would I do this? How do other people deal with the same filenames for different files? It even happens within the same production so the solution to create an subfolder for each production (read this a while ago) does not work for us.
I know that for future projects we will tell people to use more describing filenames (but even there: there might be two different kitchens called the same..) but I also talk about a huge, messy archive to migrate..
thanks
tobi

Let me rephrase things a bit as I used the term Excel chart to literally. We create charts in SSRS. We then use a query string that includes "rs:command=render&rs:format=Excel" to get the chart into Excel. The "chart" in Excel is really just an
image and the associated data table is the cells filled in with the data. We then "select" the area that encompasses all of these objects and paste that into the PowerPoint slide.
Our source folder structure is as follows (note that I while I am being generic, the Ecel file names are the same between folders:
Folder A: File1.xls, File2.xls, File3.xls ..... File40.xls
Folder B: File1.xls, File2.xls, File3.xls .....File40.xls
This goes on for 8 folders but can be as many as 30
The routine we use to create the xls file from the SSRS chart names the xls file and puts it in the correct folder.
The idea was we would create a template chart set in PPT for folder A and then create copies of the PPT and change the links to point to Folder B, etc.
We have ensured that all Excel Documents are closed when we try to do an update.
We are also getting the following error and I'm paraphrasing: Cannot open multiple instances of a file of the same name even if it is in a different location. This occurs when doing an update links when we don't get the initial error message I listed first.
If we change the names of the files in each folder: i.e. FolderAFile1.xls, FolderAFile2.xls, etc then we can do the update links. This is time consuming as the SSRS exports are done by the end users and we are the developers trying to create a reusable solution.
One other issue we are seeing which I hope you can address is that when we are getting the update links to work, the process opens up each Excel file THREE times. It takes almost 15 minutes to update a PPT with 18 linked xls files.

Same file, same date - different file!

Similar Messages

Maybe you are looking for