Same files but new location, how to change location.

Hello, I am editing a project but Premiere is running really slow. I know realize that my files are located on a network drive. Now I want to change my files in premiere to at new location, hard drive for example. is this possible?
Best regards
Anders.

Open the deployment manager, right click on the location and choose "Register" from the popup menu.
Note that you will not be allowed to change the login information if you have deployed any objects to the location. If this is the case, then all deployed objects must be dropped before you can make any changes.
If what you want to do is to deploy to two different environments (eg development and production) the best thing to do is probably to use two sepparate locations.

Similar Messages

Different photos with the same file name!! How to change this?

While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?

Celtic Mom
Welcome to the Apple user to user discussion forums
While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?
It sounds like you are using the finder inside the iPhoto library - do not do that - you will corrupt your library and lose the edits, keywords, etc that you have
iPhoto does not care about duplicate file names - it handles it fine
changing the title of a photo does not affect the file name - although when you export the photo you can use the title for the file name as an option
What are you doing and what do you want to accomplish?
Remember do not ever make any changes in the iPhoto library using the finder or any other program
LN

HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me

Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?

Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.h

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?

Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly

I had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all

i had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all

Ditto on Clinton's suggestion using OmniDiskSweeper. It is an excellent tool.
It may seem elementary, but do empty Trash. Only then do you gain storage space.
You may also find a few hints here:
http://pondini.org/OSX/DiskSpace.html
Ciao.

I have adobe cc on pc but i have now joined the mac world but not sure how i change my pc software to mac please help

i have adobe cc on pc but i have now joined the mac world but not sure how i change my pc software to mac please help

Your Photoshop CC can be installed on a Mac or PC. Just install the Mac CC Desktop app and install Photoshop CC from there. It will be in your Application folder.

Saving a file in Vi creates same file but with ~ added [SOLVED]

Hi,
I'm not sure if I pressed a key combination, but when I save a file in Vi I get another file that has the same name as the original file but with the ~ character added to the end of the filename. For example, if I edit foo.txt and save it, then the original will be saved, but I'll also get a new file named foo.txt~. Does anyone know how to fix this?
Thanks!
-nterpol
Last edited by nterpol (2008-11-09 12:30:59)

I think that the default backup settings (in /etc/virc if you use the basic vi package) changed with the recent upgrade to Vim 7.2.25.
For information on file backup setting combinations, see :help backup-table in Vim.
Edit:
fwojciec wrote:http://thehumblecoder.wordpress.com/200 … kup-files/
That article advocates disabling the use of swap files (:set noswapfile); however, I wouldn't recommend it. Whereas backup files are designated with a trailing tilde (~), swap files have names ending with .swp. The latter should be removed automatically when Vim exits (unless it is exited abnormally, such as when the user closes a terminal emulator without first quitting an instance of Vim that is running inside it).
Last edited by ssjlegendx (2008-11-10 04:13:24)

New router - how to change wifi settings for Photosmart B109n

I got a new router. How do I change the wifi settings for my Photosmart B109n? I changed the PC wifi settings (no problem). I connected the PC (Windows 7) to the printer by USB cable. In the HP Solutions Centre, when I click on Settings / Network Settings, it tries to open a browser (IE9) page, with the URL being the IP address (192.168.2.3), but it goes to the "cannot display" page. Do I need the HP software CD? (I think I've lost it.) The manual explains how to set up (using the CD), but I can't find how to change settings for a new router.

Glad to see that you have everything solved. If you run into any other problems, feel free to ask.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Multiple users using same files, but with different libraries

My wife and I both have our own iPhone 3Gs. We also have separate user accounts on our MacBook Pro. We would like to share the music/video files that we've got stored on a network drive, but we don't want to have the same library file. We both have different tastes in music, so I'd prefer if our song ratings were separate, as well as the rest of the library info (namely "last played date"). Is there a way that we can keep separate library files, but also be able to have new song purchases on one library automatically added to the other?

FryeX wrote:
I have this in my controller:
-(IBAction) setSize:(id)sender
And it would be enough to get to the title of the button
The sender param should be a pointer to the originating button, and you can use the button's tag property to id it. E.g.:
-(IBAction) setSize:(id)sender {
UIButton *button = sender;
NSString *title = button.currentTitle;
int tag = button.tag;
NSLog(@"sender=%@, title=%@, tag=%d", sender, title, tag);
- Ray

From byte[] that rapp an image file TO a byte[] of the same file but in jpg

Hello
I've a byte[]. These bytes are of an image file with any extension (gif, png, jpeg etc.)
I want to convert these byte[] in another byte[] array that has the same image but represented in jpeg format.
I've found something like
JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder .... and others
but I've a lot of confusion about what are the steps to do something like that..
Someone can post some sample code?
thanks a lot guys
giada

Check out this thread. I had a similar problem awhile back, and that thread has pretty much everything you'd need to know about working with byte[] image streams. Although my problem was not exactly what yours is, I know the answer to your problem lies in that thread. Read it over a bit, and check out the links provided.

Just recently changed mobile number but dont know how to change my number on imessage or facetime

so i have recently changed my mobile number but i have no idea on how to change my number so it works with imessage and facetime rather then them using my email address it should let you do it threw the imessage settings someone please help me

@broomez420
iMessage:
Go to settings>messages>send & receive>make your edits there.
Facetime:
Go to settings>facetime>make your edits there.
Hope that helps

I am a new Mac user. How do I easily move files to new locations and folders in Finder, like I was used to doing with Windows Explorer?

I am a new Mac user, converting from the Windows world. How do I easily transfer files from one folder location to another in Finder, like I was used to doing in Windows Explorer?

You can expand Finder into multi-panes, I am not at my Mac right now to get the exact key strokes so don't want to mislead you. Do so many things on auto-pilot that when someone asks I need the machine so I can get the exact things to click on.
But you can get the multi-pane view and drag and drop from pane to pane.

Default File Type for New Forms - How to change?

Hi,
How can I change propperty: Default File Type for New Forms?
It is enabled! Do I have to be Administrator to change it? I have SAP ALL..
SFP -> Layout -> Tools --> Options -> Document Handling
tnx, Adibo.

There is no authorisation required for changing the file type. You are saying its enabled, then you can change it.
Edited by: Nikhil Poojari on Aug 28, 2009 6:50 AM

I am trying to save a document with the new pages and it will only save as a zip file any ideas on how to change this?

I am trying to save a document with the new Pages and it is only saving as a ZIP file anyone know how to fix this or choose a different file type?

Take a look at the FileSelector
First make sure the FileSelector is expanded so you can see the directory and sidebar. That's what the little disclosure triangle up by the filename is for. Once the FS has been expanded to look like the above picture, look to see what subdirectory has been selected. Use the SideBar to select an appropriate one.

Apple ID: same one for 2 IPhones - how to change in order to have 2 separate ID?

Hello!
My husband and I have a problem with our IPhones: when we bought them 2 years ago, we put the same Apple ID on both, which was not very clever. Til now, we haven't had so much problem but now, with iOS6 and imessage, it horrible. How can I change my Apple ID and that my husband keeps his existing one?
Many thanks for your help!

If you wish to continue as you are... See Here...
setting-up-multiple-ios-devices-for-messages-and-facetime.html
If you create your Own / New Apple ID...
From Here http://support.apple.com/kb/HE37
"... you can still access your purchased items such as music, movies, or software using your other Apple ID.... "

Same files but new location, how to change location.

Similar Messages

Maybe you are looking for