Same images in LR3 and LR2.7?

EDIT: I just reset Camera Calibration->process back to 2003 from 2010(Current) and I get the speed.
- Terje
Hi,
I am one of those that has been struck by the LR3 effect with a slow handling .
I have to do some image prosessing and will use LR 2.7 to get the speed back. I have processed some images in LR3 already. Can there be anything in these images "marked" by LR3 that can give me some kind of conflict when opening them in LR2.7?
I will try of course but wonder if someone has done it and experienced something.
- Terje

Hello, deltorno.
Thank you for visiting Apple Support Communities.
I understand that photos are not updating using Photo Stream. Here is a troubleshooting article that may help resolve this issue.
Get help using My Photo Stream
http://support.apple.com/en-us/HT203511
Cheers,
Jason H.

Similar Messages

How to use the same image map over and over

Sorry, I posted this a couple of years ago and got a good answer by Murray. I'm so rusty with it, I can understand how it works anymore.
Question:
I have a large jpeg image map for a hundred pages. The jpegs are all the same except I changed the city name for each one.
So for each corresponding htm page, the 4-5 links out are the same.
Waht is the trick to not have to create by hand hotspots? thanks.
I have previous notes, but I don't understand anymore, (too rusty) what they mean:
The good news is that you really don't need a template at all.
Just open one of your existing pages in DW, select that central image, browse to select the correct replacement image, and save the page with a new name. It will have all of the image maps already there, from the original image. One and done as they say."
My old interpretation of this:
select the large jpeg and then in link field drag over to the new city jpeg

Ok, Nancy, code copy/ paste did work fine.
what does this mean:
"Change the image in the properties panel to display your new image."
(the image is displaying ok)
NEverthesless, I think I got Murrays old notes.
Here is my new version of Murrays writing, easiest way I think:
You open up a pre-existing html, say Chicago. Then drag over with pointer to the new jpeg you want (Buffalo). It replaces Chicago with the buffalo jpeg, all links work perfectly. Then do a save as called Buffalo.

Understanding what it means to move an image off LR3

I've moved thousands of images off LR3 and off my Macbook. But previews of those images remain in LR3 even though the underlying image is no longer there. How do I move the edits and adjustments still appearing in LR3 as a Preview image, off LR3 and off the Mac? I get a notice the image cannot be exported because it's no longer there. When I initially moved the images off the Mac, I mistakenly thought I was moving the edits and adjustments too. But not so. I was just moving the same original file which came over from my Nikon D90 to LR3 on my Mac, now off the Mac. How do I connect the edits and adjustments which are as I understand it what LR3 IS, and which appear as the Preview images, to the images that go with those edits and adjustments, that are no longer on my Mac? Do I import those files again? Get them hooked up with with the edits and adjustments I earlier made? And export them again, this time somehow keeping the edits and adjustments together with the underlying image file? Feeling a tad confused what's going on here.

LR stores the location of an image file and the adjustments you made to each image. If you use LR to move the images, then the location within LR is updated to the new location as part of the LR-move operation. If you use a different method outside of LR to move the images (e.g. Finder or Explorer) then LR has no idea about where the images are.
LR already knows about the images, it just doesn’t know where they are so you don’t need to reimport them, again.
To reconnect the adjustments to the image, you need to tell LR where the image(s) moved to. If you preserved the folder structure as you moved the images then the task is relatively easy, you can just do a right-click on a top-level folder with a question-mark in the lefthand panel in Library and choose Update Folder Location, which lets you tell LR where that folder moved to, and you can do this for each of your top-level folders in LR. If everything was imported under one top-level folder, then you only need to specify that and all the images under that folder will be updated. If there are many top-level folders, then you’ll need to specify the new location of each, one-by-one.
If, however, you moved the images into a different folder structure than when LR last knew about their locations, you’ll need to do the updating at the granularity of the equivalence between the old structure and the new structure. Worst case, you might have to right-click on each folder or each image and update its location, but hopefully you left the folder structure the same as you moved them off the Mac, and there aren’t that many folders to reconnect.

Capture window shows the same image with Viewer

Hi there,
I'm trying to capture a movie from HDCAM-SR via Sony SR-5500 deck.
Deck's settings look fine, It plays the tape very well, I can see it from it's original display screen.
I think somethings wrong with my FCP setting.
I use FCP 5.1. When I say CAPTURE, I see the same image in viewer and in capture windos. if the viewer is black, capture win. is black too. I tried to change my display settings, but it didn't work.
I'm capturing it via KONA 3 card and 10 Bit Uncompressed.
This happened before, but I don't remember how I get rid of that...
thanks in advance

scs...
Can you take another shot at explaining this? I'm confused.
CaptM

Labview vision - while loop + image + shiftregister = 2 times same image.

Well I got this problem here at home.
I've this .vi
I've labview 8.6 + labview vision module + labview vision module for usb webcams.
Well this .vi is pretty simple but it gives me some strange results...
When I run this I get the same image on "image1" and "image2"... while in fact "image2" should be the "image1" of the last loop. This should be visible when you set the sleep time of the loop higher. Now the problem is is that on my frontpanel "image1" and "image2" are ALWAYS equal... But then when I click on the two wires of "image2" and "image1" then the difference is visible. But on the frontpanel "image1" equals "image2"...
A couple of weeks ago when I first was testing with labview + vision on my university there was a visible difference between the two images. This was with the same webcam and software.
Anyone got an idea how this is possible?

Wetzer wrote:
You can think of the purple "Image" Wire as a Pointer to the Buffer containing the actual Image data.
That's what I thought too, but why would it behave differently during execution highlighting? (sorry, I don't have IMAQ, just curious )
LabVIEW Champion . Do more with less code and in less time .

ACR6 and LR2 in anticipation of LR3

Just a quick question. Does this workflow work?
Edit levels, etc of an image in ACR6.0
In LR2.7, click on the arrow in the top right-hand corner of the image to import settings from the xmp file that ACR updated
Then, in LR, edit metadata and export.
What I'm hoping is that when I upgrade to LR3 when it's out of beta, that I will see the metadata adjustments I made in LR2.7 as well as the image edits I made in ACR6. (I would guess that if I adjust eg sharpening in LR after ACR, then I would have problems, but I'm hoping that I will remember to not do that!).

dj_paige That's an awful lot of work, especially since LR2.7 will not interpret ACR6 edits properly. I don't see the benefit of this.
I believe dj_paige understands this - he's simply trying to save his metadata edits in LR2.7. I assume he's using PS CS5 for these edits, and wants to import the photos into LR purely for organisational and metadata purposes.
dj_paige I don't think that you will be able to take work done in LR3 and "revert it back to LR2.7"
By revert, I mean the Lightroom sofware, not the catalog - uninstall LR3, and temporarily re-install LR2.7. You will then have access to the ORIGINAL LR2.7 backup catalog. This process a contingency only, and to be used only if the metadata edits are lost in LR3.

How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1

How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1
A senior citizen needs some help.
Thanks

Saving each image as different size - is it an option for you? I would save images with their name as: 20x30.png, 16x20.png etc etc.
Or explain whether you want these in a webpage in which case only one image is necessary and different sizes are displayed with good CSS code. this is question for Dreamweaver forum if this is what you want.

Same Image every time in JTextField with HTMLEditorKit and HTMLDocument

Hi all
I have a JTextPane with HTMLEditorKit as editorkit and HTMLDocument as document. I am trying to load an html file into the text pane. the html file contains image. When loading first time it is shown perfectly. After I change the image file with other file with the same name(overwrite it) and trying to load the html file again,the image is the first time loaded image. As i think the image is kept somewhere in "cash" or kind of that. But I need to refresh the html every time it is loaded and not to read from "cash".
And code which i use:
package client.temp;
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.BufferedReader;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.InputStreamReader;
import java.net.MalformedURLException;
import java.net.URL;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextPane;
import javax.swing.text.BadLocationException;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
public class TestPanel extends JPanel {
public TestPanel(File htmlFile) {
JTextPane textPane = new JTextPane();
JScrollPane scrollPane = new JScrollPane();
HTMLEditorKit htmlEditorKit = new HTMLEditorKit();
HTMLDocument htmlDocument = new HTMLDocument();
setLayout(new BorderLayout());
scrollPane.getViewport().add(textPane, null);
add(scrollPane, BorderLayout.CENTER);
URL baseUrl = null;
try {
baseUrl = htmlFile.getParentFile().toURL();
} catch (MalformedURLException e) {
e.printStackTrace();
htmlDocument.setBase(baseUrl);
textPane.setEditorKit(htmlEditorKit);
try {
FileInputStream fi = new FileInputStream(htmlFile);
InputStreamReader isr = new InputStreamReader(fi, "UTF8");
BufferedReader r = new BufferedReader(isr);
htmlEditorKit.read(r, htmlDocument, 0);
r.close();
isr.close();
fi.close();
} catch (FileNotFoundException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
} catch (BadLocationException e) {
e.printStackTrace();
textPane.setDocument(htmlDocument);
public static void main(String[] args) {
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JButton b = new JButton();
b.setText("push");
b.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
TestPanel panel = new TestPanel(new File("c:\\temp\\temp.html"));
JFrame fShow = new JFrame();
fShow.getContentPane().setLayout(new BorderLayout());
fShow.getContentPane().add(panel, BorderLayout.CENTER);
fShow.setSize(800, 600);
fShow.setVisible(true);
frame.getContentPane().add(b);
frame.pack();
frame.setVisible(true);
and here is the html file structure of my temp.html file
<html>
<body>
<p>
<img src='image01.jpg'>
</p>
</body>
</html>
the folder in which the temp.html located (in my case c:\\temp\\) contains image01.jpg file too.
The piece above works correctly when clicking on the button first time.i.e. shows the image01.jpg correctly. After closing the showing frame fShow(not exiting application) and replacement of the image01.jpg by other file named image01.jpg, but with other content and clicking button again shows the first image again.If I exit the application and start again the picture is shown correctly.
I need this because I am getting images from database while the template is same always.
Thanks in advance.

URL baseUrl = null;
try {
baseUrl = htmlFile.getParentFile().toURL();
} catch (MalformedURLException e) {
e.printStackTrace();
htmlDocument.setBase(baseUrl);All you want is to defeat the cache. You could do it using random number generation.
String newURL = htmlFile.getParentFile().toURL().toString();
String rand = "rand="+new java.utl.Random().nextLong();
if ( newURL.indexOf("?")>=0)
newURL +="&"+rand;
else
newURL +="?"+rand;
baseURL = new URL(newURL);
htmlDocument.setBase(baseURL);
This will ensure that u are using different url everytime.(well mostly!)

Images in A2 and PS dont look the same!

Hi everybody,
I have a very strange problem with the latest aperture version. maybe i had it before and i never noticed. When i compare an image in A2.1.2. to the same exported image in PS(CS3). The PS Image looks slightly less red. I have tried everything possible. I reimported raw and tifs and jpgs. The same image in PS always looks a little different. Have used 16-bit, 8-bit export, always in Adobe RGB. In PS my preselected profile also is adobe RGB. What could be wrong? When i re-import the image into A2 the raw and the tif are absolut identical. Wheres the fault? PS Presets?
Thanks for Help
best
thomas

How are you getting the images into Photoshop? Are you using ACR to do so?
Note that ACR (and Adobe's Lightroom, in fact), have long been known for poor rendering of reds on Canon cameras. They tend to render read more as orange. If you read Adobe's forums on ACR or Lightroom, you can see this is one of the more common complaints. They are making steps to address this with their profiles, but in general, IMO Aperture does a much better job of getting accurate reds.
So if you are opening a Canon RAW file in Aperture versus Photoshop by way of Adobe Camera RAW, then that is your answer. If, on the other hand, you are starting with Aperture and using the "Edit in Photoshop..." item and seeing a color shift, then there's something else afoot. Which is it?

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

I want to take an image that's from my files, no cropped and be able to set up action(s) where I can drop that image behind an 8x10 frame overlay, then the same with a 5x7 frame overlay, then the same image behind a memory mate overlay that's an 8x10 size

So is there a way to do this using the images right from the camera, where I don't have to crop three different sized images and drag them into the overlays? I can set up an action for each, but cropping the same image 3x is a pain in the ***..!

There are. I did not write you need to learn scripting and write your own scripts. As I wrote most Photoshop will never write a script. However I would write every Photoshop user will at times use a Photoshop script to do some automated process for them.
I wrote the it would be very hard to do what you want to do would a straight Photoshop action. Actions on their own can not use logic. An action would need to to it by brute force.
However in Photoshop CC Adobe added conditional action support. With this support it is now possible to create a group of actions to process some conditions. Like you can separate Landscape from portraits have an Action for processing landscape images and an other for processing portrait images.
Size is still hard to deal with for you can have landscape's the are extremely wide to landscapes that are square and portraits the are extremely narrow to those that are almost square.
Image the extreme aspect ratio will not fill a 8:10 or 5:7 area it resized to 10 and 7 and creating crops the have 8"10 and 5:7 will have images compositions where most of your image content has been discarded.
Camera images do not have extreme aspect ratio the usually have 3:2 or 4:3 aspect ratios there are exceptions. When you have print made the are 5x7 and 8x10 by printers the prints you receive from the printers are center crops from your image files.
It is very easy to make center crops if aree images have the same aspect ratio and orientation to begin with. Now with CC you can have seperate actions to the two orientations.
A general solution would need handle arbitrary aspect ratios the resulting center crop may well not have a satisfactory image composition for source image with extreme aspect ratios.
Photoshop ship with several scripts users use all the time to process their image. You may have used some yourself. Do any of these sound familiar to you. Conditional Mode Change, ContactSheetII, Delete All Empty Layers, Export Layers To Files, ExportColorLookupTables, Fit Image, Flatten All Layer Effects, Flatten All Masks, generate, Image Processor, Layer Comps To Files, Layer Comps To PDF, Lens Correct, Load DICOM, Load Files into Stack, Merge To HDR, Photomerge, Script Events Manager and Statistics.
My action package as I wrote contains more the a dozen script I wrote to be used in actions to add logic into the actions.
It would also be extremely easy to create a Photo Collage Template PSD that contains a background layer that has your two frames the 8x10 and 5x7 and also have two alpha channels to map the locations of the images. That can be batch populated with my script BatchPicturePackage.
Photo Collage Toolkit
Photoshop scripting is powerful and I believe this package demonstrates this A video showing a 5 image collage PSD template being populates with images:
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples

Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7

Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How to Save an image and retreve the same image with edit option!! ???

I am facing with a problem
I have a image which is preloaded, user accessing the image should be provided with a option of adding a text on some part of image etc and save it. Later when that imagine is tried and retrived it should display the edited and saved image and allow user to edit again.The text will be written in a square box which can be dragged anywhere on the image. Is java script and ajax best for this.?
Can anyone help in showing the basic things i need to follow to achieve this.
Thanks in Advance
Edited by: aadi on Feb 12, 2008 9:41 PM

You could try to write a web service that returns a byte array and convert the image to bytes, and convert it back into an image again.

PS4 rendering very "hot" compared to Bridge and LR2- HELP I am stuck

Have done all kinds of tests and still get a difference nearly equal to setting the vibrance to +50 and the saturation to +6 in LR2 to somewhat equal the look of the imported image in PS2.
Here are the facts:
I have used Bridge to convert the NEFs into DNGs using Camera Standard for the D700 with no other changes;
Lightroom 2 and Bridge give the same rederings in terms of colors and relationships of color to each other. PS4 however, adds lots of yelow, brightens reds and blows highlights. I have opened the file three ways in PS4, three attempts through Bridge with Save and convert, another time with Save and option click, another time with Open. All three methods look equally bad. I have opened the file directly through PS4, not using Bridge. Just as bad.
Now here is the interesting part: when I take spot readings for the image in Bridge and the image in PS4, I get the same numbers.
For example: R,G,B for Bridge: 232,205,162 PS4: 232,205,163.
Should look the same, right?
PS4 Color Settings: Prophoto RGB, Gray gamma 2.2,Dot gain 10%,Convert to working profile, ask for mismatch, Engine: Adobe ACE, all other options not checked.
If I desturate monitor colors by about 15% the image looks closer to Bridge and LR2, but is still more yellow. This is not a good solution for printing reasons, however.
PS4 version 11.0.1 Mac OS/X version: 10.5.8 (not using the latest which is SnowLeopard.)
I have sent the query to Adobe Support, but suspect they'll tell me I don't have support and then there is a time lag, also.
Camera Raw: 5.5.097, PS4 11.01, LR2: 2.5 with Camera Raw 5.5 in the dialog box
WHAT VARIABLE HAS NOT BEEN CHANGED?

Yes, sorry, you did mention that the Zoom has replaced the Netgear. Regardless, if the Zoom is providing the NAT & DHCP services ... which I would assume that it is by default, the AEBSn should be reconfigured as a bridge.
With AEBSn still configured as a bridge, please try the following:
o Power-down the Zoom, AEBSn, and computer(s); wait at least 10-15 minutes.
o While the equipment is powered-down, connect one of your computers directly to any available LAN port on the AEBSn using an Ethernet cable.
o Power-up the Zoom; wait at least 10-15 minutes.
o Power-up (plug-into power) the AEBSn; wait at least 5-10 minutes.
o Power-up the computer connected by Ethernet.
The computer should now be able to gain Internet access. Please post back your results.

Same images in LR3 and LR2.7?

Similar Messages

Maybe you are looking for