Same interface name in alert for the synchronous messages

Dear Friends,
I have configured the alert for my interfaces. In the container i have added the message id, sender interface and receiver interface variables. While the error occurs, the alert is getting triggered. But in the alert long text in both the sender and receiver interface the Same 'is_Update'(receiver interface) is only coming.
But in the case of asynchronous interface alerts the sender and receiver interface are coming correctly in the long text of the alert.
Please tell me what might me the problem.
Thanks and Regards
Prem

thanks for ure reply....
ya i have given the correct interrface names.... this problem is nt only for my interface. this is for all the developers over here...in long text the same interface name is coming for both the sender interface and in receiver interface

Similar Messages

Multiple alerts for the same Message ID

Hi
I have configured outbound ftp adapter. I have configured alerts inorder to capture any error in the adapter engine.
Now,alert is triggered showing an error in the ftp adapter ( say incorrect ftp details). But i get multiple alerts for the same message ID several times. I have also set the parameter Max No od Delvs to 1 in the ALRTCATDEF transaction.
I keep getting the same alert number of times a day. How can i restrict the number of alerts to 1 for 1 message ID.
Regards,
Vani

Hello Andreas,
Thanks for your reply.
In my scenario i would need an alert per Message. That is the reason why I have not checked the option "Supress Multiple Alerts" since it would allow only alert per rule.
Is there is any way we can get one alert per message.
Also, after correcting the eror in the file adapter will the file which was not placed due to error in the adapter be placed automatically. I wanted to know what would happen to the lost file or unprocessed file since it dint reach the destination due to error.
Regards,
Vani

ERROR: MyService.jws:715:There are two or more operations with the same schema-element 'ns0:MyNameSpace' on the input message in a web service file or callback interface.

I have two web service operations that have the same complex type as their input
parameter. I want to map this type to an existing schema. I can successfully
do this with the first operation using XQuery but when I attempt to do this with
the second operation I get the following error:
ERROR: MyService.jws:715:There are two or more operations with the same schema-element
'ns0:MyNamespace' on the input message in a web service file or callback interface.
ERROR: SUGGESTION: Use different schema-element values for each of those operations.
How can I use different schema-element values? The input parameters are to be
mapped to the same schema and same element since they are the same for both operations....

I am having the same problem. How did you resolve this..?? could you please tell me the solution??
Thanks
Shari

ConnectionException: Name space accessor for the java: name space has not b

Hi,
While running JUnti test cases I am getting the following. Can anyone help?
com.deere.u90.iaf.jdbc.connection.ConnectionException: Name space accessor for the java: name space has not been set. Possible cause is that the user is specifying a java: URL name in a JNDI Context method call but is not running in a J2EE client or server environment.
IAF JDBC Connection Management Framework exception in JNDI lookup of DataSource.
Source of configuration data = C:\starteam\JDPS - Software Delivery system\3123_CanDB\sds\WebContent\WEB-INF\classes\config\SDSConnectionManagerLocal.properties
Dynamic Properties = false
Property Name Suffix = SDS
Connection Pooling Enabled = true
JNDI Provider URL = corbaloc:iiop:wpuds90700.jdnet.deere.com:2811
DataSource Name = java:comp/env/jdbc/SDSDEVLDataSource
     at com.deere.u90.iaf.jdbc.connection.ConnectionManager.initializeEnvironment(ConnectionManager.java:282)
     at com.deere.u90.iaf.jdbc.connection.ConnectionManager.<init>(ConnectionManager.java:224)
     at sds.view.intranet.servlets.SDSGenericServlet.getConnectionManager(SDSGenericServlet.java:192)
     at junittest.ProgrammedECUAddComponentTest.setUp(ProgrammedECUAddComponentTest.java:75)
     at junit.framework.TestCase.runBare(TestCase.java:125)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:118)
     at junit.framework.TestSuite.runTest(TestSuite.java:208)
     at junit.framework.TestSuite.run(TestSuite.java:203)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:392)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:276)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:167)
Thanks in advance,
Dhir

I also get the same problem, this is very tedious but if you edit the song somehow and re-save it then it will copy. Not sure what the problem is at all, tried contacting Apple about this to no avail.

Does OVI suite alert for the new incoming calls?

I know it alerts for the new incoming SMS, but not for calls. Am I right?
But why, the PC suite do it and this is important feature for me.
Solved!
Go to Solution.

Same problem for me!!
I allways used an E52 with PC-Suite which showed me the incomming call notifications on my laptop.
Now with a new E6, I have to use OVI and there are no notifications anymore.Which is really annoying in a bussy office environment!
So please provide us with a solution, because I think you are losing a (unique selling point here).
Thanks,
Ron

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to add a Wait Step in BPM for the synchronous send step

Hi,
we have a scenario where in one of the step in BPM is a synchronous step which sends data to ECC system and gets the Respose .
The Requirement is that we need to add a wait for the Synchronous step in BPM as the data sent to RFC(ECC) need to get comitted before sendng the response which requires some wait time.
Currently we are getting the Response to PI from ECC where it was reported as the response is not correct.
Is this possible to add wait

> Is this possible to add wait
No, this does not make any sense.
The BPM waits for the response anyway.
You could change the scenario to an asynchonous pair of messages.
But in my opinion the error is inside the ECC, because the response from ECC is not correct.

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

Enter your name and password for the server when trying to connect PC and Mac?

I'm trying to connect my iMac and my WIndows tablet (got it for free) together through my home network. I open iPhoto, then "Import to Library" ; the connection fails and when I click on "Connect as" up pops this box asking me to "enter your name and password for the server -computer name here-". HELP!! Where do I find the password? I've tried everything possible and no go.
I am running Windows 8 and Lion.

Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.

How to remove "Enter your name and password for the server"

Hi there,
I have a Mac Book Pro from 2008. I have mountain lion running on it.
We used to have a server (pc) in the office that I connected to and stored all of my photos and videos etc.
We have jsut upgraded to a new server and this connects great!
However, ever since the switch, when i open keynote, imovie or iphoto i get the error message:
"Enter your name and password for the server "192.168.0.10".
(it is trying to connect to the old server)
I have tried a bunch of fixes online but i dont think they are relevant for this issue - or i cant find what they want tme to change or remove.
Any help would be great! having this pop up while trying to create things slows everything down.
thanks!!

Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.

Confgure email alerts for the *INTERNAL SAP MAILBOX* for CCMS

Hello,
I am currently workling on setting up a CCMS for monitoring the system performance of the server.
This involves setting some profile parameters for the system in a way that if any of the parameters exceeded their threshold value an automatic alert message is sent to a contact on his internal sap mailbox.
Can someone provide guidance on how to confgure this email alerts for the INTERNAL SAP MAILBOX.
Thanks,
Rohit

Hi,
Please try this link.
http://help.sap.com/saphelp_nwpi71/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/content.htm
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
V...

Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

Problem was founded: plugin "Speed dial" was autoupdating this page when open new tabs with him

How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.

The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

Emails alerts for skype voice messages = haywire

within the last week, i can't count on emails alerts for skype voice messages. the email notifications during the past week have been false or out of date. its confusing because these skype email alerts tell me i just got a voice message (sometimes in the middle of the night) when there has been none. btw the emails are clearly not spam, they are emails from skype (i've checked the raw header) there is no trojan attached, the links work to skype's website. this is a problem on skype's end. i temporarily unsubscribed from email alerts about voice messages just to save myself from the confusion. skype, please fix this, i miss my email notifications working as they should!

so, even though i changed my settings to NOT send me email alerts for voice messages, i'm still receiving the same false email alerts. so, your email alert system is broken skype. there is no rhyme or reason to the order of them too, i get an alert about a message from 4 days ago and then one from 5 days ago and then one from 3 days ago all at random times compared to when the message was actually left.

No administrator found for the task Message no. 5W141

Dear all,
i am doing asset mass changes i am not able to release my work list (AR31) it"s giving message like
No administrator found for the task Message no. 5W141
plz can any one help me following steps i followed
1.substitution for assets mass changes to substitute Dep Key
condition is asset class = 15000 and Dep area = 01
substitute with Dep key S200
for 15000 asset class actually dep key S475
2.i created work list for asset class 15000 and dep area 01
then attached my substitution
3. in AR31 here all assets status is Ready when i release work list it"s giving message same
i tried in DEV and QTY no solution
this is high priority in my project
plz Dear friends send reply
Regrds
Govind

HI Jayendra
I am having the same problem with releasing the worklist in AR31.
No administrator found for the task
please let me know the solution.
Thanks
Sharath

Same interface name in alert for the synchronous messages

Similar Messages

Maybe you are looking for