Same issue all over this board with HP Printer! Where did your quality go, HP?

I have an HP Photosmart 6520 that is used to print less than 20 pages per month. Now the black ink will not print. I just spent $$$$ to replace all the cartridges and still have the same issue. The cartridge is not clogged. I have aligned the print heads, etc. and performed all the necessary troubleshooting. I am so disappointed.
I have always been HP brand loyal, but when I have to buy a NEW printer since this one has obviously failed after 13 months, it WILL NOT be an HP. I also have an HP 3051A that is a cheap piece of junk. I rarely use it but it won't last long either. Cheap plastic. Where did your quality go, HP?
So now what? Out of warranty. Out of luck. Out $ for cartridges and a printer that should have lasted longer.

@angieeb
Thank you for using HP support forum. I have sent you a private message. If you're not sure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

Similar Messages

When I deleted and then recreated the same account all the emails are now gone. Where did they go?

I was having problems with getting mail from my verizon email account. Suddenly stopped working when checking mail. Sending was fine. No server settings were changed. So as a last try before the nightmare of finally giving up on them I deleted the account and then set it up again. I now get the emails but all the old ones are gone. Where did they go?
I've read all the posts about the verizon smtp ssl issues but this (the missing emails that were alreadiny in thunderbird) seems to be a TB question.
Any help would be very much appreciated.
Jack

Hei,
so i hope that was the problem.
I advice you to check the solution from christ1.
After that try the solution with the login on the webinterface.
I wish you, that one of this is successfull.
Greets

I know this topic is covered all over this board but I can't find the Answe

I burned a DVD using DVDSP 4.0 but it plays on almost nothing and the ones it plays on it stticks and sputters and pixalates. I have an old G-4 733 tower 1 gig ram and I compressed a 2 hour 15 min show using Compressor two pass VRB and Dolby 2.0 audio. (Took only about 36 hours to encode) The disk said it burned fine. When I try it in the simulation mode it works fine. The burner is one of apples first super drives. I am using blank Verbatim DVDs. It even sticks in my Mac's burner. Plays somewaht in my desk top DVD burner. Doesn't play at all in any of my desk top players, Pioneer, Toshiba, Sharp, GE, Panosonic, Sanyo. All bought with in the last two years. Two 250 gig fire wire drives but a brand New 120 gig internal HD and that has all the media I used on that drive. The MPG2 file was exported from a FCP4 project to compressor.

Actually, the (anecdotal) evidence suggests that when burning your project, use a max of 7.4MBPS for the video and ALWAYS encode the audio to AC3. If you choose not to encode the audio, and end up using .aiff format, you are adding over 1.5MBPS to the combined bitrate for the disc.
DVDs have a ceiling of 9.8MBPS for the video on a replicated disc, and 10.08MBPS for all assets combined. When using a writeable format this has to be lowered because the discs are just not as reflective and players will choke on the data throughput as they cannot read the information from the disc so effectively.
Even at 7.4MBPS some players can struggle, especially with .aiff audio. However, encoding to AC3 at 192Kbps really does help improve the playback quality on a wide range of players, and therefore helps improve overall compatibility.
You should also avoid using paper labels on your discs. Use inkjet printables by all means, but avoid sticking paper to the disc!
Finally, use the best quality disc you can get, and burn it slowly. You cannot adjust the burn speed within DVDSP, but by using Toast you can... build to a disc image on your hard drive and use Toast to burn that. Slower burns make for more compatible discs.

Same issue all over but no file to delete????

Finder no longer displays about 99% of my RAW or JPG photo files. I can still preview them manually but I cannot see them in Cover Flow or Icon view. Instead, I get a little jpeg icon. Not very helpful when you need to scan hundreds of images fairly quickly.
Anyone else seen this? Anyone found any remedies? I have already tried several things mentioned on the forums for similar problems.
I had this issue back in october and someone recommended I delete the finder.plist file in my preferences folder.
I did that and voila! My images came back. However I am experiencing the same thing again and that file no longer exists.
What to do now?

I would suspect that preference file is actually there but you are looking in the wrong place. delete the file /users/username/library/preferences/com.apple.finder.plist, control-option-click on Finder in the dock and choose "relaunch".

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

Can not make FF my default browser...When asked I get "Your computer must be restarted to complete a previous upgrade of FF". When this is done, it's the same thing all over again...

Can not make FF my default browser...When asked to make, I get "Your computer must be restarted to complete a previous upgrade of FF". After restart, it's the same thing all over again. I have explorer & chrome installed on my PC.
== This happened ==
Every time Firefox opened
== A few monts ago.

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

How do I turn off the default radio in my music app. I cannot play my playlist until it first defaults to radio and then I have to start all over. this is very tedious!!!

how do I turn off the default radio in my music app. I cannot play my playlist until it first defaults to radio and then I have to start all over. this is very tedious!!!

This got me curious when I first saw it... It does indeed seem very Un-Apple-like (at least historically) to prevent a user from customizing their own device - Mac or iDevice - but today I'm unsure. I cannot grasp how a UX designer could leave a simple "OFF" switch out of the control panel. Another thing that Music Data Streaming does is eat up your Data Plan.
This May not be the exact issue as you describe, but seems to solve an issue of a Radio Playlist in iTunes resuming where it left off from the last use...
My Carly girl May 18, 2014 6:25 PM
Re: How do you turn off i tunes radio on the ipad air once it starts playing songs? in response to Betty91545
Play last song on list, songs will then stop. Works for me on iPad. Haven't tried yet on iPhone.
It is likely that THIS may be part of the real reason to push the iTunes Radio feature - revenue stream (nobody remembers "Payola?"):
Apple is more beholden to the shareholders than in the old days

When i plug in my iPad2, iPhoto comes on not iTunes. I see iPad in system profiler under USB. I have reset, removed and re-downloaded iTunes. When I download iTunes it works until the next time i plug in the iPad2 and then the same thing all over.

When i plug in my iPad2, iPhoto comes on not iTunes. I see iPad in system profiler under USB. I have reset, removed and re-downloaded iTunes. When I download iTunes it works until the next time i plug in the iPad2 and then the same thing all over.

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Firefox has been crashing a lot lately. All of this started with the 2nd-to-last Firefox update -- I refuse to do the new update because I'll lose an invaluable --to me-- add-on, ljlogin).

It does happen when I have multiple tabs open, but I generally have a LOT of tabs open so this is not new behavior from my browsing, Firefox is just not handling it anymore. All of this started with the 2nd-to-last Firefox update -- I refuse to do the new update because I'll lose an invaluable --to me-- add-on, ljlogin

Are you sure the multi-links icon on the bottom bar of your firefox window is enabled (ie not greyed out)?

" Cannot Delete iCloud Account - There was a problem deregistering this iPhone with iCloud. Try deleting your account again"! i can't sign out my icloud account

I want to sign out my icloud account but I can't. When I try sign out, I received notification " Cannot Delete iCloud Account - There was a problem deregistering this iPhone with iCloud. Try deleting your account again"

Backup to computer first and sync Apps to iTunes first!
Restore in recovery mode will work, be persistent and retry
Recovery restore challenges
- computer didn't detect recovery iphone, attempted and failed 3 times
rebooted computer then recovery restore worked
- recovery restore was successful, unlocked, and iMessage/Facetime, Find My Iphone, ALL WORKS!
Restore from backup challenges
* Make sure you have plenty of harddrive space!
- have to restore first then restore from backup, i did this incorrectly by restoring from backup and the find my iphone feature got stuck forcing me to recovery restore
- each restore from backup attempt will copy the original backup and create another backup folder. My original was about 10gb, so it copied another 10gb onto my computer's harddrive
- when i restore from backup, my computer ran out of space and errored out/failed.
- I tried again to restore from backup then figured out where the backup data folder was and tried to transfer to external harddrive but not quick enough and failed again.
- finally cleared the extra backup data files and restore from backup was successfull
Missing apps from restore from backup
- Downloaded all my missing Apps from APP store
- I have 300+ apps and there are only 15 screen scrolls, have to organize before apps will populate and load, very difficult to organize now. Wished I had sync Apps first.
Conclusion
This process took me literally 20+ hours to correct and will probably take me few more hours to organize the apps into their respective folders...
At least I got everything to work. Hope this helps!

I am missing all my music that I paid for , where did it go?

I am missing all my music that I paid for , where did it go? I am so bleeping frustrated I could scream!

See Empty/corrupt library after upgrade/crash.
tt2

Power issues all over: is this the end?

Full historic on the laptop:
- PB G4 15" 1.67 GHz bought in May 2005
- logic board replaced under warranty
- hard drive replaced under warranty last year
- battery was part of the battery recall program
- AC adapter died late last year, the thin wire finally came undone and I stopped using it as I started seeing sparks...
I then bought a third-party replacement AC adapter. My replacement battery also started to show its age after more than 300 cycles. I was starting to have issues with me leaving my PB more than a day under sleep, I would have difficulty waking the computer up (had to remove the battery, reset the PRAM, etc...). Finally, a couple of weeks ago, that same occurrence happened again but this time, impossible to charge the battery back. Computer would start fine from AC, I would pop in the battery but it would stay at 0% even after a day being plugged in.
I decided it was time to buy a new battery (NewerTech from OWC) and things were looking good last week. Everything was working fine and I was back at 3+ hours of battery life... Then yesterday, I left my PB open on my desk, plugged in. I came back a couple of hours later, impossible to wake it up. If I press the power, I get the chime, fans kick in and then nothing. Even removing the battery and resetting the PMU with the power button was not working. Only thing that worked was leaving the computer w/o battery and power for like 30 minutes and then starting again to power it up... At first I got a kernel panic (grey screen + noway sign) but after a couple more tries, I was able to start and everything seemed to work fine... But today, again, I'm unable to power on the PB...
Any suggestions? Do I have to start looking at the 13" MBP? It stinks cause I was really hoping I could eek out enough from the PB to have a USB 3 laptop as my next one...

thing is, the release notes state that messing around with core settings in audio prefs can help but they add that different settings will be needed with different projects and i jus can't be bothered to start with all that considering how stable things have been 4 me in the last year or more
maybe i have slightly over-reacted (after one stressful week) but comments like the above (from sliderson) are truly dull & limited. this board is full of peeps lamenting crashes with 9.1.3, big thanx to those like mike connelly who can offer something positive in the midst of general panic
hopefully i'll change my mind as i continue to monitor the consensus of the community here, particularly around this issue of settings for numbers of cores. when peeps who know much more than me about the inner workings of macs tell me these settings really solve the issues i'll listen and take note

HT201263 ok, I did the above, and I waited 2 hours for this to download the "update." Then I try it again on the ipod, and it starts to redo the same download all over again !

I started the update, and in the middle of it, the same previous screen pops up that it can't connect to the ipod,and the ipod screen goes back to "disabled." I waited it out, let the download finish. Then I had to try the process over again, and it started the download all over again, even though I just did that. Another two hours??? This is driving me mad. All for a stupid password ! How do I reset this dang thing, so I can open it. Bad enough I have to re do everything, because I have to restore it. PLEASE HELP !
Just wanted to add that apparently the ipod is disconnecting and reconnecting to the computer somehow. I know because when you plug in the ipod, the computer makes a noise, as with any hardware. Well I click on "restore," agree to the restore, then it starts to download the update. A few minutes later, I hear the computer make the same noise, as if I have disconnected the ipod, even though I haven't even touched the cord. Then it makes the sound again, as being reconnected or plugged in, then the message pops up that it can't be connected, because a password has to be entered. The ipod screen then goes from the restore picture ( the itunes logo with usb cord) to the same "disabled, connect to itunes."
I am not trying a different cord and seeing if that helps the plugged in portion.

Do a manual install using the instructions here.
have you download the update/firmware, place the iPod in recovery mode and then update/restore using the instructions in the article.
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
Can somebody advise me on this matter. Thanks in advance

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

Why is the webpage jumping all over the place with parallax scrolling?

Hi all, I'm getting a little frustrated here... I've built a looooong (10,200 pixel) parallax scrolling site, when I click 'Preview' it plays like a dream, but when I render the HTML, view in browser or publish to business catalyst to view, it just jumps all over the place. I realise that the page is extremely long, I'm thinking it could be that but just need to clarify it before I rework it all and maybe find out after, that it was something else that was causing it to happen.
Your views would be greatly appreciated!

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

Same issue all over this board with HP Printer! Where did your quality go, HP?

Similar Messages

Maybe you are looking for