SAME LAYOUT with different heading for invoice and service order invoice

Hi,
I need to use the same layout for printing both invoice and service order invoice. The layout should print the same data except the title should be changed accordingly ( invoice or service order invoice).
Please help me with this
Regards,
Anik

Hi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank

Similar Messages

Costing for Maintenance- and Service Orders

hi
Can any one tell me the Configuration steps for Costing for Maintenance- and Service Orders.
Kindly please guide me.
regards,
R.Ramakrishnaraj

Hi,
Please go through below mentioned threads.
Re: Activity Costing
Re: PM order costing.
Re: Planned cost not getting displayed in Maintenance Order
Re: Costs not appearing in service order
There are many threads available for Costing. Please search in the threads.
Regards,
Maheswaran.

Setting mail with Cox (or other services with different servers for pop and smtp)

My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
As a result, I can only receive mail with these services.
I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
Is there a way to set it such that I can not only receive but also send mail through either of these services?
Thanks in advance,
Didier
PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.

OK, thank you for the input.
The problem I have with this solution is like the one I have now using yahoo.
There are 2 problems:
1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
Anyway, thanks for the exchange and suggestions.
Didier

Different Header for First and Subsequent Pages with Summary on last page

The data in report can vary from 1 to more than 50 rows (order lines). The header on first page is detailed and the header on subsequent pages has only some fields (whenever data is large). There is a summary section which has to be on the last page of the report only and that too at the bottom (just above the fixed footer in the report).
So, for a single page report the the detailed header, all lines, summary at the bottom and then the footer has to be printed.
For a two page report - first page will have detailed header, some lines, fixed footer and second page will have short header, remaining lines, summary at the bottom and then the footer.
For a three page report the summary has to be on third page only and so on.

In a word processing document, select your object, place it where you want & then go to Format > Advanced > Move Object to Section Master. To place a different repeating object, you will need to insert a section break.
With page layout documents, each page is a separate section, so there is no section master. Objects placed on one page don't repeat.

We have two Ipod Touches in the Home and two Ipads. Right now one of the Ipads has a separate user indentity. Can both Ipods be used to use the same library with different user ids's and different passwords.

We have two Ipod touches and two Ipads in our home. Right now both Ipods are using the same used id and password to access itunes and sync music. But recently both os us have downloaded the Ibooks segment to our Ipads and now the only way to sync the second Ipad for Ibooks is to use the same used id and password. But the problem is that with our two Ipads in the home, we established two separate used ids and passwords one for each. Is there a way for me to still use the second Ipod touch and the second Ipad with completely separate userids and passwords. In other words to share the music library I have accumulated and yet to sign in each with our separate identities. That way the Ipads can sync and the Ipod touches can sync. Is this possible.

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

Saving the same image with different croppings for printing various sizes

I've searched for this to no avail. I tend to always have a few pictures in rotation that I end up cropping multiple times when I am printing. Pictures where today I need to print a 4x6 and tomorrow it's a 5x7 of the same picture, etc. I am trying to figure out a way to save the file with that cropping. Ideally there would be a way that if I also modified anything else in the image that would also show up in the other versions. I know there is Create Virtual Copy, and that could work if I could then figure out how to change the file name so it would show that it was cropped for 5x7 or whatever. Are there any other creative ways I am missing?

When you create a Virtual Copy it is given an individual Copy Name (as well as the original file name)....default would be Copy 1, Copy 2, etc. However, that Copy Name is editable in the Metadata Panel, simply click in the name field and you can give it a more descriptive name, e.g "VC Crop 5 x7". See here:
Before:
After:

Is it possible to create a PDF with different colors for screen and printing?

I'm working on a document that features light colored text on a dark background. I'll be sending this document as a PDF to someone who will likely want to print it. Is it possible to set up the document such that it will display this way when viewed on screen, but will print as black text on a white background, without requiring any special action on the part of the recipient?
Printing a color separation of just the text color produces exactly the results I'm after, but I can't ask the recipient to do that. I need it to happen automatically any time it's printed.
I've tried setting up a duplicate text layer in black and placing it under the background layer, then setting the background layer and colored text to 'never print'. This works within Acrobat Pro, but not when I print the same document from Preview.
Is there an acrobat equivalent of a CSS print stylesheet?
Thanks.

Create the document in layers with the background on a seperate layer than the text. Export the PDF with"Create Acrobat Layers" selected (it will need to be at least version 1.5).
Open the PDF in Acrobat, choose the background layer then Options>Properties>Initial State and under "print" choose "Never prints".

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

Same sqlID with different execution plan and Elapsed Time (s), Executions time

Hello All,
The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
17th Oct 18th Oct
221,808,602
21
2tc2d3u52rppt
213,170,100
72,495,618
9c8wqzz7kyf37
209,239,059
71,477,888
9c8wqzz7kyf37
139,331,777
1
7b0kzmf0pfpzn
144,813,295
1
0cqc3bxxd1yqy
102,045,818
1
8vp1ap3af0ma5
128,892,787
16,673,829
84cqfur5na6fg
89,485,065
1
5kk8nd3uzkw13
127,467,250
16,642,939
1uz87xssm312g
67,520,695
8,058,820
a9n705a9gfb71
104,490,582
12,443,376
a9n705a9gfb71
62,627,205
1
ctwjy8cs6vng2
101,677,382
15,147,771
3p8q3q0scmr2k
57,965,892
268,353
akp7vwtyfmuas
98,000,414
1
0ybdwg85v9v6m
57,519,802
53
1kn9bv63xvjtc
87,293,909
1
5kk8nd3uzkw13
52,690,398
0
9btkg0axsk114
77,786,274
74
1kn9bv63xvjtc
34,767,882
1,003
bdgma0tn8ajz9
Not only queries are different but also the number of blocks read by top 10 queries are much higher on 17th than 18th.
The other big difference is the average read time on two days
Tablespace IO Stats
17th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
947,766
59
4.24
4.86
185,084
11
2,887
6.42
UNDOTBS2
517,609
32
4.27
1.00
112,070
7
108
11.85
INDUS_MST_DATA01
288,994
18
8.63
8.38
52,541
3
23,490
7.45
INDUS_TRN_INDX01
223,581
14
11.50
2.03
59,882
4
533
4.26
TEMP
198,936
12
2.77
17.88
11,179
1
732
2.13
INDUS_LOG_DATA01
45,838
3
4.81
14.36
348
0
1
0.00
INDUS_TMP_DATA01
44,020
3
4.41
16.55
244
0
1,587
4.79
SYSAUX
19,373
1
19.81
1.05
14,489
1
0
0.00
INDUS_LOG_INDX01
17,559
1
4.75
1.96
2,837
0
2
0.00
SYSTEM
7,881
0
12.15
1.04
1,361
0
109
7.71
INDUS_TMP_INDX01
1,873
0
11.48
13.62
231
0
0
0.00
INDUS_MST_INDX01
256
0
13.09
1.04
194
0
2
10.00
UNDOTBS1
70
0
1.86
1.00
60
0
0
0.00
STG_DATA01
63
0
1.27
1.00
60
0
0
0.00
USERS
63
0
0.32
1.00
60
0
0
0.00
INDUS_LOB_DATA01
62
0
0.32
1.00
60
0
0
0.00
TS_AUDIT
62
0
0.48
1.00
60
0
0
0.00
18th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
980,283
91
1.40
4.74

The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
You wrote with different execution plan, I think, you saw plans. It is very difficult, you get old plan.
I think Execution plans is not changed in different days, if you not added index or ...
What say ADDM report about this script?
As you know, It is normally, different Elapsed Time for same statement in different day.
It is depend your database workload.
It think you must use SQL Access and SQl Tuning advisor for this script.
You can get solution for slow running problem.
Regards
Mahir M. Quluzade

How to load and unload same SWF with different xmlFilePath?

I have a slideshow on my homepage and try to load and unload same instance with different xmlFilePath based on language on the same page.
var flashvars = {
        xmlFilePath: escape("http://www.bodto.com.tr/kik.aspx"),
        xmlFileType: "OPML",
        lang: swfobject.getQueryParamValue("lang")
        //initialURL: escape(document.location)
      var params = {
        bgcolor: "#000000",
        allowfullscreen: "true",
        wmode:"transparent",
        allowScriptAccess: "always"
      var attributes = {}
          swfobject.embedSWF("/swf/slideshowpro.swf", "flashcontent", "550", "400", "10.0.0", false, flashvars, params, attributes);
Actionscript3
var langPath = root.LoaderInfo.parameters["xmlFilePath"]+root.LoaderInfo.parameters["lang"];
my_ssp.xmlFilePath = langPath;
var fileType = root.LoaderInfo.parameters["xmlFileType"];
my_ssp.xmlFileType = fileType;
Based on above informations, how could I achieve it?

Suddenly that code in the following gives me some error
var langPath = root.LoaderInfo.parameters["xmlFilePath"]+root.LoaderInfo.parameters["lang"];
my_ssp.xmlFilePath = langPath;
var fileType = root.LoaderInfo.parameters["xmlFileType"];
my_ssp.xmlFileType = fileType;
Access of possibly undefined property LoaderInfo through a reference with static type flash.display:DisplayObject.
The only code snippet works is
var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters;
for (var param in paramObj) {
   if (param == "xmlFilePath") {
      my_ssp.xmlFilePath = paramObj[param];
   if (param == "xmlFileType") {
      my_ssp.xmlFileType = paramObj[param];

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
(74502)

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

I have tried to install office for mac and an iWork trial and each time I go to install my "terminal" opens with the heading bash-80X24 and in the box reads Joel$-office installer.mpkg joel$ . nothing further happens

I have tried to install office for mac and an iWork trial and each time I go to install after downloading my "terminal" opens with the
heading
bash-80X24 and
in the box reads Joel$-office installer.mpkg joel$ .
nothing further happens

This is thread from Apple discussions.
Look for the suggestion from Shootist007 towards the end of the 2nd page.
It is just may be useful.
https://discussions.apple.com/thread/3709115?start=15&tstart=0

How to handle same product with different part numbers and pricing in SAP.

I am a new user and want to learn if the following scenario can be handled by SAP.
Our business buys a product from a supplier which has 2 different part numbers and prices. It is the same product. One is the primary product whilst the other is available only as an upgrade option with a different part number to a mainline product at a cheaper price .
Our issue is that we sometimes buy the upgrade option with a mainline product to get the better price even though these go into stock. Basically we need to have the items linked with both part numbers in SAP at different prices but inventory both in and out only going against the primary part number. Any ideas?

Thanks Jitin
I did give them different part numbers and then attached a Bom containing the primary part number against the upgrade option however I really need to have the secondary item as a sales and purchase item but non inventory so the stock comes from the primary part. Ideally if we receipt the goods in as the secondary number the inventory goes to the primary part. If the second number is an inventory item then I have the issue of the same part with different part numbers sitting in stock at different prices and having to rely on employees understanding the difference.
Sorry to be so confusing. I will do some more testing over the weekend and see if I can find a suitable solution.
Thanks
Martin

SAME LAYOUT with different heading for invoice and service order invoice

Similar Messages

Maybe you are looking for