Same link works on desktop BUT NOT on ipad -Help pls!

Hello,
I have created ONLY a desktop version of this site, www.frabricci.ca. When I check the link to the clients instgram account (seen on the home page instgram icon & last paragraph of that page, as well as last paragraph on contact page), its works on desktops and on mobile (iphone), yet when viewing the site on an ipad the link does not work. Confused to why this would happen as I've only created one site with the same link - HELP PLEASE!

Hi
I tried to check instgram account link from home and page and it works on iPad.
Can you please let me know the browser details and OS details on iPad that you are using , also please check with different browser.
Thanks,
Sanjit

Similar Messages

  • Link works on mac but not on pc

    Hi -
    I am trying to insert a jpg into a dreamweaver file.
    I then upload the html file along with the jpg to my server in a folder called "layout"
    So the url is:  http://www.mysite.com/layout/test.html
    The link works on mac, but not on pc's.
    Any idea why?
    Some links work on pc's like this, and others don't.
    Thanks- It's driving me crazy!!

    The link is not correct....you have it listed as" mysite.com", which I assume is where you are to insert the name of your url.
    Gary

  • Web sites containing mms links work in IE but not Firefox 4.0

    Web sites containing mms links work in IE but not Firefox 4.0. when I play the video in IE, I go into IE, and locate the mms link under properties, when I right click. If I copy the mms link form IE directly into firefox, it will work. There ought to be a better way to do this. Also, I am using a hardware firewall, not a software firewall, and no proxy.

    You need to use the file:// protocol, but you may still encounter problems if you fix that.
    See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • Router works for desktop, but not for surrounding laptops.

    The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

    Are you able to see your router's network  name on your laptop? If yes, then follow the below mentioned settings.
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesturday but not now, any help

    Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesterday but not now. I've restarted the browser, restarted the computer, disabled then enabled cookies in the privacy settings and still nothing. Any help?

    Hi,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • HT1430 cox email is working on PC but not on IPAD and IPhone

    cox email is working on PC but ot on IPad nor IPhone

    Hello there, jwritz.
    The following Knowledge Base article provides some great steps on troubleshooting your issue:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Dynamic Parameter List works on desktop but not when run on Crystal Server

    Hi,
    I have a report, and the database command query takes one parameter ({?Year}. There is a second parameter used for a record select which is a dynamic paramenter list (multiple select, required). When running the report from Crystal Reports 2008 on my desktop, it first prompts for a year, and then once that is entered, it will come back with the list (of Companies) to select from. It works very smootly and as desired.
    But when I load this report to Crystal Reports 2008 Server, it will ask for the year (which is a static list), and this is good, but then it comes back with an empty dynamic select list on the next screen.
    Are there any special caveats that I need to be aware of in regards to dynamic lists when running from the CR server?
    Thanks!

    Hi Pat, 
    This should work but a couple of things to check: 
    1)  Are the two parameters linked to the same database?  If the parameters are linked to fields from different tables in different databases then you need to make sure you set the Database Configuration and have the report log on to both databases. 
    2)  Are Crystal Reports and Crystal Server the same version?  I had problems with parameters after we upgraded to 2008.  We had to install the latest service packs for both Crystal 2008 and the Enterprise Server.  Then we installed Crystal 2008 on the same machine the Enterprise Server was on.  Crystal Reports and the Enterprise Server share some common files.  Some of those files were updated for Crystal but not for the Enterprise Server yet.  Once we synched them our reports have run fine. 
    Good luck,
    Brian

  • Plugin works on desktops but not on laptops

    Windows XP
    CS2
    It makes no sense for it to just not work on laptops, but this is the pattern I've seen so far. When it errors out on the laptops, I get a "Dr. Watson" error: "InDesign.exe has encountered a problem and needs to close..." When I look to see what the error report contains, it mentions "AppName: InDesign.exe AppVer: 4.0.5.688 ModName: widgetbin.dll ModVer: 4.0.5.688". I've Googled for "widgetbin.dll" but nothing looks relevant.
    I have put in MessageBoxes to see how far it gets in my plugin code. It exits the constructor but does not enter the AutoAttach (AutoAttach being the very next routine in my code that gets called on machines where the plugin does work), so I assume it is not being caused by any code I have written.
    I know this is not much to go on, but I welcome any suggestions.
    Thanks,
    Miles

    I have now installed Visual Studio 2003 on one of the laptops and this did not correct the problem. (I would be using VS 2005 but Microsoft's lousy wizard does not completely convert the 2003 project; it leaves errors including "external symbol not defined" or some such, so I got lazy and stayed with 2003).
    Anyway, I've stepped through the code on the laptop and it apparently gets caught when it tries to open an ADODB connection. I am using a Database class that #imports msado15.dll (this file exists in the same location on both machines), only because I found it easier to integrate into my plugin project than say, CDatabase, or System.Data namespace. The "m_Cnn->Open" in Database.cpp executes just before the comutil.h code, which is where it breaks on the laptop:
    Database.cpp
    bool Database::Open(char* UserName, char* Pwd, char* CnnStr)
    try
    HRESULT hr;
    hr = m_Cnn.CreateInstance( __uuidof( ADODB::Connection ) );
    m_Cnn->Open(CnnStr, UserName, Pwd, NULL);
    comutil.h
    inline _bstr_t::_bstr_t(const char* s)
    : m_Data(new Data_t(s))
    if (m_Data == NULL) {
    _com_issue_error(E_OUTOFMEMORY);
    On the laptop, it just enters "inline _bstr_t::_bstr_t", throws an Access Violation error, and then goes into disassembly. When comparing the variable values in the Autos window between the desktop and the laptop, everything looks the same up to and including the line where it breaks. I can't see any difference. For example, the previous line in Database.cpp, "hr = m_Cnn.CreateInstance( __uuidof( ADODB::Connection ) );" returns a "success" value on both machines.
    Still lost,
    Miles

  • Web graphic links work on Mac, but not PC

    I have two websites. The old one is DogToysAndTreats.com. The new one is FunStuffForDogs.com. I need to change the home page graphic on both of them to point to my shopping cart pages. I have done this and published the changes on both sites. It works on my Mac but not on my PC.
    On www.funstufffordogs.com, the graphic at the top with the bulldogs is supposed to link to http://store.funstufffordogs.com/storefront.aspx. Same thing on www.dogtoysandtreats.com. It works on my Mac in both Safari and Chrome. On my PC, it doesn't work on IE, Safari or Firefox. (BTW, I haven't worked on any of the other links until I can figure out how to do it properly.)
    I don't get why the platform has anything to do with it.
    Lisa

    Looking at your source, the problem may be that the images refer to an external server link from the one actually hosting the website page.  Whenever you try to mix servers on a single page, you depend on the network connectivity being reliable to all the servers simultaneously.  This can be as much a problem on a Mac as a PC.  Sometimes routers have bad router tables, or internet providers do, and this can cause issues for multiserver websites.  Using on your router & network settings an OpenDNS DNS server can help:
    http://www.opendns.org/

  • .SWF Links work in Preview, but not in Browser

    I'm sure this question has been asked plenty of times before, but i can't seem to find the answer. I have created an advertisement with Flash CS6, Actionsript 2.0 (because it has a pageflip). When i test the file on my computer I can click on a Button that I created and it pulls up a webpage. If I upload that same .SWF file to the webserver, the button doesn't work. I have adjusted the Publish settings so that Local playback security is set to "access network only", and still it does not work.
    Any help would be greatly appreciated.
    Thanks
    TK

    Hello!
    Thank you for checking my pages. I did clear the cache. Updated software. Repaired permissions. Rebooted (a million times). I also made sure I had no overlapping graphics. The problem appears to be on the pages linked from This Week (in the navigation bar), the pages are Probability and Measures of Central Tendency. The links are in Text Boxes with frames on them.
    I tried viewing the pages using Safari on my iBook, on an iMac using Safari and on a PC using Firefox. I get the same links not working. It's just odd that they appear to function "normally" in iWeb. I was hoping I did something dumb that I could fix quickly. If not, I'm having to do the pages over.
    Your suggestions are greatly appreciated.

  • Links work in Dreamweaver but not online

    Hello, I am trying to figure out why my flash files work correctly locally but don't after I upload them. I am using Mac Flash CS4 and AS2. (They were CS3 files originally)
    When I use Safari to view the uploaded files and check the Activity window it shows the files load but they don't show up. I have a main swf and others are loaded into it using:
    on (release) {
    loadMovieNum("flash/links.swf", 1);
    Are there any known bugs/work arounds to be aware of?  Thanks. -Derryl

    Almost always when something works locally but not on line... it's a path problem. And I see that you are accessing your .swf from a sub file.... nothing at all wrong with that, but you do need to understand how pathing in Flash works:
    Pathing issues
    Almost always when it works on the local machine and not the server, it's a pathing problem.
    You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
    Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location.  So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
    In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
    So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
    Best wishes,
    Eye for Video
    www.cidigitalmedia.com
    Best wishes,
    Adninjastrator

  • DB Link - works via SQL but not via packages

    I have a database link on user ODB on database A, to database B. The DB Link seems fine for SQLs that i do, but doesn't compile in my package code. Please tell me why it works for "regular sqls" but not inside a package.
    Example: while connected as ODB user on database A, if I do this query:
    SELECT "TRAXDOC_DETAIL"."FILE_NAME",
    "TRAXDOC_DETAIL"."FILE_TYPE",
    FROM "TRAXDOC_DETAIL"@TRAXDOC_LINK
    WHERE "TRAXDOC_DETAIL"."TRAXDOC_ROW_ID" = 100031 AND
    "TRAXDOC_DETAIL"."TRAXDOC_LINE"= 2
    It works fine. But the same query inside a package that is owned by user ODB on database A will not compile, stating the table/view does not exist.
    The database link is owned by use ODB on database A, connects directly to the owner of the tables in question on database B.
    Any suggestions welcome... this is an urgent issue, because it also worked fine on my customer's test environment, but not on their Production that they just upgraded. I need to know what to look for as to what could be wrong.

    Thanks so much for your response - Prefixing the call to the table within the package, with the schema owner does indeed solve the problem. Since this is a Production issue, i have implemented this fix in my customer's database.
    However, I would still like this issue permanently resolved. The next time we send out updated package code, this will happen again (unless we then fix it again). I'd still like info from anyone on what exactly must be done to allow the call within the package to work without specifically pre-fixing the table's schema owner. It shouldn't be needed... The DB link is connecting via the same schema on database B that owns the table in question.
    pre-fixing the schema owner is something we don't do in our sql statements, and this has worked fine for many of our cusomer's environments. We're only seeing this issue on one environment.

  • WRT54G Wireless router works on desktop, but not laptop

    I have a WRT54G wireless router with version 1.00.4
    It works on my desktop, I can log into the net no prob
    My laptop however (dell w/ windows xp) does not even recognize it.
    Wierd thing is, it worked perfectly with no problems today, I have been going online with my laptop using the wireles router for weeks now..
    I haven'tupgraded the firmware, or do anything to any of the computers whatsoever.
    When it stopped working, I reset my router/modem, I transfered over my MAC, etc.. but the laptop still does not even recognize my router signal when I try to search for it on my laptop.. It will recognize a handful of other wireless routers from the neighborhood, but not mine.
    My desktop is windows xp, and so is my router.
    Any helpwould be greatly appreciated.

    i had that problem before with the my router and i just did customize the wireless settings. try the the link below, its a great help.
    1.
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
    2.
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
    hope this will help you...
    ~ lyf_R_foeittee ;o) ~~

  • Links work in iWeb, but not from browser when published

    http://web.me.com/mocote
    All's well since August. Then yesterday, some links decide not to work anymore in browser. Can't create new ones either. What changed? In iWeb, all links look fine in the Inspector. You can click on all external links and file links in iWeb. Same links won't work in browser. Very frustrated. Please help.

    Hello!
    Thank you for checking my pages. I did clear the cache. Updated software. Repaired permissions. Rebooted (a million times). I also made sure I had no overlapping graphics. The problem appears to be on the pages linked from This Week (in the navigation bar), the pages are Probability and Measures of Central Tendency. The links are in Text Boxes with frames on them.
    I tried viewing the pages using Safari on my iBook, on an iMac using Safari and on a PC using Firefox. I get the same links not working. It's just odd that they appear to function "normally" in iWeb. I was hoping I did something dumb that I could fix quickly. If not, I'm having to do the pages over.
    Your suggestions are greatly appreciated.

  • Links work in iWeb, but not in browser

    Using a blank template. established a photoshop background and placed transparent rectangles over the images and linked the rectangles. In iWeb (1.1.2), they work fine. but they do not work in the browser. I noticed a problem someone had by accidentally creating "floating" boxes. I have reworked all of my links with no luck. Help!!!
    www.reachthecity.org
    Message was edited by: v-rob

    I answered your question yesterday:
    http://discussions.apple.com/message.jspa?messageID=10520122&tstart=0
    Nothing has changed.
    The footer of the page covers the links.
    The links themselves are 0x0 pixels. The shape-images are 1x1 pixels.
    Whether or not links work in iWeb is irrelvant. They should work in the browser.
    Check, check, check.

Maybe you are looking for