Same logical system name for two productive systems - BW, PI issues
Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.
> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus
Similar Messages
-
Hi All,
I'm doing a scenario as JDBC2FILE.
I tried to add my jdbc sender system to SLD. So i created the technical system
now i'm creating business system...what should i give at logical system name tab? I've created tech system and business system as third party.
do we need logical system name in this scenario where we are not interacting with any R/3???
can anyone suggest the way to achieve this scenario?
Thanks in advance.....
Santhosh.Hi Santhosh,
I just want to add ons..few more information which it might help you.
You no need to give logical system when you are using Thirdpaty.
Please check the below blog you will get more idea how to proceed to achieve the JDBC Scenario.
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
If you have any doubts while proceeding with your scenario plesae let me know..I will try my level best.
Thanks and Regards,
Chandu -
Logical Sys Name for Business system in SLD for Third Party
Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
GowriHi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo -
SLD: Adjust / Add logical system name for Business System [XI 3.0]
Hi,
In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
KristianIn a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan -
Giving logical system name for PI 7.11 system
Hi,
how can i give logical system name for PI 7.11?
Thanks.Check if this helps http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/frameset.htm
if you are loking for naming conventing : use CLNT{client no.} eg: PIDCLNT001
Regards,
Srinivas -
Logical system name for this BI is not allowed
Working under Data Warehouse Workbench, when I click BI Content button, I get pop-up: "Logical system name for this BI is not allowed". Then I get three options from NW system: "Create", "Assign" or "Cancel".
What can I do? How to create a new Logical System?
Thanks,
MikeRefer this link to create a Logical System...
http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/content.htm -
Changing the default logical system names for adaptive RFC models
Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich -
Source System conversion for several production SAP
Hello all,
What kind of customizing in table RSLOGSYSMAP i have to do ?
We have 1 DEV and 9 production system P01, P02, .... P09.
In the table i must insert 9 lines, one for each production system ?
DEV -> P01
DEV -> P02
DEV -> P09
Or i insert only one line
DEV -> P0X
and i change the table before each of the nine transport ???
I have to transport the same order 9 times ?
Thanks for your precious help.
ChristopheCristophe,
I think this must be done on the target system where you will mention the source and target fields .
You do not have to manually enter the values into the table - you can find this under source system conversion defined in the transport connection .
I think the source system just gives it current logical systems and then the target system will do the conversion and hence it will not be 9 entries in your DEV environment but 1 entry each in your productive environment.
Also you cannot have two entries for the same logical source system in this table.
Arun -
Chart of account conversion SLO tool,method for a Production system
Hi All
We have a requirement like we want to use Chart of account conversion tool for a production system where transactional data are present.
We have used this COA conversion tool for best practice solution not in a production system.
we want to know the difference between these two methods like production and non production system.
Provide me some process document on the SLO service tool for the same
Mrinal dey
9836265158Hi Mrinal
I'm wondering the same? How to go on in productive system after to use the conversion toll?
How did you manage?
Regards
Angels -
System name for alias GD4_500 not found in portal
Hi people,
I want to launch a query from analyzer, but i have the next error message "System name for alias GD4_500 not found in portal".
What can i do??
More thanksRead,
http://help.sap.com/saphelp_nw70/helpdata/en/fb/93ed3d72fe4b5ae10000000a11405a/content.htm
Regards
Juan -
Standard Program Name for updating the System-Variables everyday in BACKGRO
Hi All,
Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?Hello matt,
I have a program with variant.
This VARIANT input values will store in TVARVC table every day night background job.
i want the program name -
Creating source system PC Files on productive system
Hi,
I have a problem, i need to create source system PC Files on productive system.
I tried to do it in RSA1 - source systems.
I could not create any source system - error message :
"No entry for BW_USER in table RSADMIN available"
Where should be problem?
Thanks for help
RadkaHi Radka,
You have two options to do that:
1. Write an ABAP program or use an Infohub to download the data on to your Prod Application server.
2. Download the data to your PC and then FTP to your Prod App server. You can speak to your BASIS on this.
Bye
Dinesh -
Assign Logical file name for the physical file path through Program
Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
GauravI think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a® -
One Sender system (sync) and two receivers system(Sync) . Pls help
Hello All,
For one Sender system (sync) and two receivers system(Sync)
as I am using BPM for it.
CRM sender system (RFC)
DM (RFC) and ERP Receiver systems (RFC)
Pls let me know
In Receive there is only two mode
1. Async
2. Open S/A bridge
So do i need to choose Async mode for sender RFC.
Pls tell me the BPM flow steps for my scenario
RegardsUse Open S/A bridge
The scenario could be done wihtout bpm. Ur requirement is not clear but here could be the steps. Steps.
Receive
Sync send
Sync send
Async send
Regards,
Prateek -
Java WAS System Copy for non-SR1 Systems
Hi,
I found the document describing the Java WAS system
copy for NW 2004SR1.
However, has anybody successfully copied a Java
WAS system (Especially if the SID was
changed) which was not SR1?
I understand how to copy the datafiles, recreate the
control files, adapt the default and instance
profiles, etc..
However, I am not sure which other parameters,
XML files, or database entries need to be changed.
This is for a development system (I wouldn't do this
for a production system).
Any information from somebody who succeeded to do
this would be greatly appreciated.
Thanks,
IFHi,
for system copy of SCM 4.0 use the document system copy for webas 6.20
https://websmp205.sap-ag.de/~sapdownload/011000358700002645032002E/syscopy620_140803.pdf
perform DB copy as note 151603 :Copying an SQL Server database (homogeneous system copy)
apply sap note 551915 - R/3 won't start after database restore or database copy after DB copy.
if you want to perform livecache copy also
check Note 457425 - Homogenous liveCache copy using backup/restore
also consider Note 886103 - System Landscape Copy for SAP SCM
regards,
kaushal
Maybe you are looking for
-
Null Pointer exception in Business Service
I am using BS confiured to accept a mfl request. I have a proxy which receives a string request confiured. I am doing string-mfl conversion using xqueries and am calling the BS. I am getting the following exception. ####<22/10/2007 12:03:47 PM EST> <
-
Can anyone help or advise ? Photomatix say that the problem is a generic problem with Aperture when it cannot handle a file. After one makes a HDR photo from say five photos and one saves it successfully as a TIFF (the default for the program) one
-
Dual 1.8 is running like a snail :(
I was running panther and then installed tiger over top of it and a couple months later it was running really slow so I reformated it totally and it's still running really slow. I check the disk image at it said it was fine and I've run onyx and I ha
-
ViewObject fetch size with non-oracle flavor?
Hi, I've been playing with fetch size / mode settings and I've noticed that SQL92 builder seems to ignore fetch size. When I run my page with fetch mode FETCH_AS_NEEDED and size of 1 and Oracle builder, i get a fetch for each row. When I switch to SQ
-
Small red LED slightly to the left of the speaker phone.
I have an iPhone 4 32gb running 4.2.1 software I recently noticed on my phone that a small red LED has appeared above the speaker. I can't say I have noticed this before. I'm going to the Apple Store this coming monday to see what they say about it,