Same management network for ESXi and UCSM?

We would like to be able to use the same management network for the UCSM management interfaces and as the management network for VMs running on our blades. For example, we'd like to have the management pool for UCSM from 1.1.1.0 and the VM ESXi management network also be on 1.1.1.0.
From what I can tell, the mangement network on UCSM is physically separate in chassis from the traffic needed to reach the blade mezzanine cards, correct? So being able to route to the UCSM management network doesn't mean we'll be able to route to the mezzanine interfaces if they use that same network.
Since our management network (1.1.1.0) is on physically different infrastructure than our data network (2.2.2.0), we're trying to have our 6120 uplink to switches with different views of the network, two for data and one for mgmt. However, the 6120 wants to allow all vlans created on all uplinks, and this isn't working.
A picture of what we're trying to do would look like this.
Is this achievable?

From what I can tell from reading other threads, I need to be in switch mode on the 6120s for this to work. Here are the relevant posts:
https://supportforums.cisco.com/message/3021472#3021472 and https://supportforums.cisco.com/message/3023689#3023689

Similar Messages

HT204053 I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

iForgot.com

HT204053 Can I use the same Apple ID for iMessage and FaceTime services from two different devices - iPhone and iPad?

Can I use the same Apple ID for iMessage and FaceTime services simultaneously on two different devices - iPhone and iPad? It seems those are competing to each other, and the services work on one of them only (iPhone).

Many thanks, Sir! Both are mine and it's good to know that imessage can work on both with the same Apple ID. Will now have to find out why imessage stopped working on iPad when it started on iPhone (new). After exploring the forum I understand that there may be plenty of reasons why imessage does not work, even though it worked previously on the same device with the same ID.

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Is there any constrain in using the same order type for MTS and MTO

Hi,
i have the constrain to use single production order type .
Can i use single order type for MTO and MTS.
is there any constrain in using the same order type for MTS and MTO.
pls help me.

Hi,
There is no constraint or limitation in using the same production order type for MTS and MTO . Settings in requirement class and material master will mainly control whether the flow is MTS or MTO.
Regards,
Mrinal

Could we have same name's for User and Groups in Active directory

When iam trying to create a user name " Logistics " under a OU, I am getting a error
"The pre-windows 2000 logon name you have chosen is already in use in this domain. Choose aother pre-windows logon name, and then try again"
We already have a group by the name " Logistics "
Could we have same name's for User and Groups in Active directory?
Thanks in Advance

sAMaccountName attribute is unique. So, the short answer is you cannot.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Upon transferring to the cloud, all my previous mail says the same date, except for today and yesterday. The rest says it came in on the same date I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...

Upon transferring to the cloud, all my previous mail says it entered my box on the same date, except for today and yesterday. Everything else says it came in on the same date on which I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...only when I moved. I have bad feelings about being to fix this...Any suggestions?

Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook..
why is it sooo hard still --- can anyone inform me on this miracle app please
thank you
sincerely
Theigalaxy

find my iphone is something one needs to activate on the phone itself using the same appelID is nowhere near enough
if it is then one can track, play a sound and remote whipe it from
www.icloud.com
if your screen is smashed and you think you can use find my iphone to get any data from your phone you are sadly mistaken

Creating network for ibook and xbox

I am trying to create a wireless network for my ibook G3. It doesn't have an Airport card and at this time, the cost to get one is prohibitive even though I know it would be the best option. I have read a number of the archived posts and was thinking of going with the Belkin Wireless G USB Network Adapter (F5D7050) and a Linksys router. Then I thought, while I'm at this, I may as well include my xbox in the wireless network I'm creating, but don't know how to do this. Any suggestions on that or whether there are any better options (other than an original Airport card and Airport base station) for creating my wireless network? Like I said, cost is definitely an issue for me, but at the same time, I don't want to sacrifice toom much security or speed. Thanks!

So today I moved all the VMs across xenbridges 1,2,3. I have none on xenbridge 0 which has all of my management, hearbeat, and migration traffic. I still have the same issue with hosts rebooting.
One example is when creating a windows or linux VM...When the guest gets to the part where it formats its disk, the host its on reboots everytime. This is very frustrating and unfortunate. Ive done all I know to do with what Ive found in the documentation.
Any ideas would be appreciated.
-James

Different physical networks for public and private IPs ?

Hi,
My ISP router, public sides and private sides of my servers are all plugged on the same switch. I was wondering if the troubles I experience with my home directories server, hanging all services very often, can come from that config. Does it make sense to usse different switches for public and private IPs ?

It's a good practice to put external and internal traffic on different switches or, at least, on different VLANs on the switch to segregate the traffic.
However, it's unlikely to cause the problems you describe unless there's something wrong with the network (e.g. it's overloaded or experiencing some kind of broadcast storm.
If you have a separate switch it's worth trying. Without knowing the make and model of your switch it's impossible to tell whether VLANs are a viable option for you.

Can Time Capsule be used strictly as a wireless network for ATV and TiVo?

I apologize in advance for the lengthy narrative but I feel that it will only help in describing my challenge/problem.
I currently own and have been successfully using an iMac and Apple TV and syncing with my iTunes account. I want to transfer the ATV to my fiancee's house since I'm spending most of my time there. Until we move in officially I'll be keeping my Mac at home. She does not have WiFi and has an old laptop that I'm pretty sure doesn't even support a WiFi radio. We eventually plan on replacing her laptop with a new Mac Book but until that time comes all I want to do is set up a wireless network for the ATV and TiVo service that I also brought over.
So, I bought the Time Capsule with the future in mind. My question, can I set up TC to act as a wireless router for ATV and TiVo only but hardwire her laptop to keep connected to the Internet? Will I need to connect ATV to her iTunes service through her laptop? Or can I access my information using ATV if the WiFi is set up correctly?
I know that until I bring my Mac and we eventually replace her laptop, I bought a very expensive wireless router but there is a method to my madness....I think.
Any suggestions on the hookup process will be greatly appreciated.

atlas138, Welcome to the discussion area!
My question, can I set up TC to act as a wireless router for ATV and TiVo only but hardwire her laptop to keep connected to the Internet?
Certainly.
Will I need to connect ATV to her iTunes service through her laptop? Or can I access my information using ATV if the WiFi is set up correctly?
The network would have the same abilities as any other network. I don't know how the AppleTV connects to iTunes but it wouldn't be any different than if the AppleTV were connected to something else.

How can you use the same Apple ID for music and apps but have a different iCloud

Collectively in my family we have 1 iPhone 2 ipod(4th gen) and 3 iPad mini's and we like to buy music and apps through the same Apple ID so that we can all share it but we also have a problem about the iCloud.
My son has one iPod and one iPad and he would like his contacts and messages to be shared between HIS two devices but he would also like all of the pictures taken in the family to be shared
The same for my daughter and for me.
Is there a way of selecting which devices share what????
Thanks a lot
Acwills

You could and should set up different iCloud accounts in "Settings > iCloud", so that every user has its own email account, calendars, reminders, notes, storage for backups and app data (files etc.), by the way everyone could also use his own account for iMessage (Settings > Messages > Send & Receive) and FaceTime (Settings > FaceTime) so that you all could write and call each other.
Next the Apple ID for music, apps and other media: You all could just set up the ssame Apple ID in "Settings > iTunes & App Stores" for all your media purchases like songs, movies, apps etc.

How to have one centeral management console for DB and Application server?

Hi
Thank you for reading my post
I read in several places that ORACLE provide facilitis that help developers to have one centeral console to manage Application server / Database and what ever oracle products.
I want to know that, when i have Oracle 10g r2 and Application server 10.1.3.1 installed, how i can use that centeral management console?
is it some other application that i should install ?
or it is just some more configuration?
thanks

What you are looking for is called Grid Control.
You will need the Grid Control Agent installed on each server that has products from Oracle's technology stack installed (database, web server, app server, etc). You will also need install the Grid Control software and repository.
You can download Grid Control from the following link:
http://www.oracle.com/technology/software/products/oem/index.html

SAME NUMBER RANGES FOR DOMESTIC AND EXPORT INVOICE

Dear All,
We have maintained Two objects separately for Exports and Domastic sales invoices which is inturn giving two different number ranges.
But our client needs same number to be continued for both.
For eg: 000001 . 000002 and 000003 is the number range for domastic invoices for Export invoice 00004 should come. now as we have maintained different objects Export invoice is starting from 00001.
Our client does'nt want to maintain separate number ranges for Exports and Domastic, same number range should be there for both which should follow continues numbers.
Please suggest me on this at the earliest.
Regards,
Jay

Dear Jay
Assuming that you are asking about Excise Invoice number ranges, please do maintain Numbers for the Object: J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi

Same Number Range for OTHR and DLFC

Hi All,
I want to know whether we can mantain different number range for OTHR and DLFC transaction Type for same Series Group.
i.e for Returns Vendor Delivery Excise Invoice(MM side-OTHR) and Outgoing Excise Invoice(Sales Side-DLFC).
Pls guide me..
With Regards
Azeez.Mohd

even when you sell SFG / Trading goods -( HAWA / HALB) , then also you have to update RG1, though they are not FG materials.
Material type in terms of excise, but not in terms of SAP.
eg:
When customer returns the goods, you can process it in 2 ways-
either by creatign Excise JV - J1IH
or by following MM route, nothing but by creating Incoming excise Invoice wrt:inbound delivery-LR in Tcode:J1IEX-
where in excise tab, material type will be defaulted as "F-RG1", but it has to be changed to "Raw Material".
similarly, Vendor returns also treat as the same,
for your info, adjustment of excise duty for vendor returns will be routed through excise JV in J1IS & mov type:122 -ret to vendor is activated for RG1.

Same management network for ESXi and UCSM?

Similar Messages

Maybe you are looking for