Same message many times to xi system

Hi all,
i want to send same message many times to the xi system,couid anyone give me idea using any adapter and using BPM and without using bpm also..
regards
ptrao

Hi Krishna,
     Let's take an example..you are sending the file to the xi...you are placing the file in the source directory...you have the option in the sender communican channel if you do no tselect the delete option from the processing mode.The XI will keep on the poll the message according to the time interval which you mentioned in the sender adapter ( file) poll interval.
For more information you can refere the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    Hope i am clear.
   Thanks and Regards,
   Chandu.

Similar Messages

Diplay Message with ABAP Planning Function (same message several times)

Hello experts,
I use a ABAP Planning Function (custom developed funtion type) to vaildate the planning data.
I want to display the validation results in a message box in the workbook. Therefor I use the Parameter I_R_MSG of the "Execute" Method.
This works fine, BUT
I want to display the same message several times.
Example (I want an output in the message box like this):
AREA1
Error Message A
AREA 2
Error Message A
Error Message B
The system merge the identical messages. And the output is this:
AREA 1
Error Message A
AREA 2
Error Message B
Can I avoid the automatical merge of identical messages in the monitor?
Thanks
Johannes

Hello Johannes,
I think the only way is to use a field for (e.g. MSGV4) to group the messages since the system compares
all fields msgty, ..., msgv4 to identify duplicates. So if your messages do not use msgv4 the above suggestion
should work.
Regards,
Gregor

"OIM Database Application Connector" is Recon the same user many times!

Hey,
I am facing an interesting issue that my OIM Database Application Connector is reconning (Creating) the same user many times.
I have created/configured the "OIM DB Application Connector" which should Recon the new user in to OIM when ever new user created in the database via portal. I scheduled the connector every 15 min. The connector is working as expected and creating new OIM user if any new user has created in the DB table.
Issue here is: I have created one user in the table which has reconed to OIM and I can see the entry in design console Recon Manager table. After 15 min when connecotr is run it is picking up the same user. So it is picking the same user every time it runs!!!. It stops picking the user after some time, but dont have exact time when it stop picking the user. But I could see min 25+ times same user and all the time the status is EVENT LINKED. Any idea please why it is happening. My matching criteria is Time Stamp Attribute: "Updated_By_Sysate" & Unique Attribute = "User_ID".
My Env:
OIM Version: 9101
Server : Weblogic
DB : SQL Server 2005 (Source DB)
Any idea please?
thanks
kln

1) Yes, you should add in your resource object all fields that are defined in xel_data_source parameters of config.xml file.
2) Correct. You have to create a user defined field in your form designer and map it to a column in your process definition (reconciliation field mapping tab).
3) Reconciliation rule is the rule that OIM use to link Database users and OIM users. You need to create a recon rule using an attribute who has the same value in both systems. Also, you need to define this rule in your config.xml file (see how to configure reconcile tasks in connector documentation). So, this attribute used in your recon rule must be required because it will be used to create or link users. You can define any other fields as required, but if one of these required fields are not filled, you will receive a "Required Data Missing" error in your reconciliation manager event.
4) Reconciliation is used to update OIM with changes made directly in your database table. To update your database table based on OIM changes, you must modify an user attribute in your UD_DBAPP user's form.
Regards.

Album display shows same album many times

Just installed iTunes 8 and switched to Album display. Display now shows same album many times. Each time is for a different song. Occurs on compilation CD that has many artists, showing one for each artist. Example: Top Gun Soundtrack
How do you consolidate to only show album once?
How do you get the album cover for one of these compilation cd's? comes back and says Artwork can't be found

Have you had a look at this troubleshooting page? It may be of some help: Why aren't songs with the same album art grouped together

Downloaded version 10, when I log on it wants to restart all the time. It has shut down and restarted at least 10 times and the same message still comes up "Your system has to be rebooted." and when you do the same message comes up?

Cannot logon to Firefox now that version 10 has been installed. I cannot even delete the program from my system. To delete it gives the same message "Your system has to be rebooted" What is going on?

Hi Cot230tage,
Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
* Right-click the icon and choose ''Run as Administrator''
If that doesn't help then do a clean reinstall.
# Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
# [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
# Run installer
Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
Hopefully this helps!

Importing mailboxes (upgrade to 10.4) hangs on same message every time

I have upgraded system to 10.4.10. Opening mail for first time, I am invited to import mailboxes. Every time, it hangs on message "14,589 of 15,233". It must be a corrupt message. When I was in 10.3, it hung my mail program every time I opened my "sent" mailbox and started indexing, hanging when it reached the same message.
I narrowed down what messages it probably was, but unfortunately, when I opened the sent folder to delete, it always hung, and I always had to force quit, hence not saving my delete actions.
perhaps I can at least import the other mailboxes if I move the sent folder and complete the import process without it. anyone know where to find the old mailbox files? they do not appear in library/mail, probably because I have not succeeded in importing them from 10.3.
and any way to open these files outside of mail and remove a message without opening mail?
thanks for any help

If you already had problems when running Mac OS X 10.3, you should have fixed them before upgrading. The conversion from Mail 1.x to Mail 2.x is broken even for mailboxes that can be accessed without a hitch in Mac OS X 10.3. In your case, upgrading could only make things worse...
Here’s an example of the most common variant of this problem and how to proceed in those cases:
Just upgraded, Most of my old Inbox is gone!
Your problem, however, is different in that you don’t even get past an incomplete conversion. If Mail stalls during the conversion process, you may try to identify the mailboxes that Mail is choking on, quit Mail, move those mailboxes out of ~/Library/Mail/ (e.g. to the Destkop), and trash any Envelope Index-named files you may see in ~/Library/Mail/, so that Mail re-creates the index and tries to import the remaining mailboxes again, then manually import the problematic mailboxes as Other.
<hr>
Alternatively, you may want to set up Mail from scratch and manually import your mail back afterwards. This would allow you to use Mail normally while solving the problem of importing the old mail as you see fit:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/. Move (not copy) the entire Mail folder out of there, to the Desktop.
3. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop.
4. Open Mail and set it up again from scratch. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and check that everything works fine.
5. You’ll have to re-configure all your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
6. Do File > Import Mailboxes and follow the instructions to import your mail from the old Mail folder that’s now on the Desktop. Import the Mailboxes folder first, then each of the POP-username@mailserver account folders, if any.
There are two ways to import Mail 1.x mailboxes into Mail 2.x. The obvious one is importing them as Mail for Mac OS X. But Mail 1.x stored mail in standard mbox format plus some additional support files, and this allows Mail 1.x mailboxes to also be imported as Other, i.e. as generic mailboxes in standard mbox format.
Importing as Mail for Mac OS X produces the best results when it works, because it takes into consideration all the files in the mailboxes, not just the mbox files where the messages are stored, and hence, allows information such as status flags to be preserved. Importing as Other, on the other hand, may work in cases where importing as Mail for Mac OS X doesn’t, because it looks at the mbox files only, ignoring the support files which is what Mail 2.x usually chokes on, but precisely because of that, information such as status flags is lost and previously deleted messages may reappear.
Hence, you may try importing as much as you can as Mail for Mac OS X, then import the problematic mailboxes as Other.
Note that what Mail asks for when importing depends on the format chosen. Mail always asks for the folder that contains the “things” to be imported. If Mail for Mac OS X is chosen as the data format, the “things” to be imported are the .mbox folders, so you must choose the folder that contains them, not the .mbox folders themselves. On the other hand, if Other is chosen as the data format, the “things” to be imported are the mbox files, so you must choose the .mbox folders that contain them in that case.
Note also that some of the mailboxes now on the Desktop may have already been partially converted to the new .emlx format during the previous (failed) attempt to convert them in place. If you tell Mail 2.x to import as Mail for Mac OS X a mailbox that already has a Messages folder, Mail will simply ignore the Mail 1.x files present there. If the mailbox was successfully converted to the new format, that’s fine, but if the conversion was incomplete, that’s not what you want.
As a result of doing all the above, some messages may be duplicated. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Help : Message Driven bean seeing the same message multiple times.

( We are using weblogic 8.1 on Solaris )
We have a bunch of message driven beans with the transaction type as 'Container' and the acknowledge-mode mode as auto-acknowledge. They are consuming messages from a weblogic Queue ( javax.jms.Queue ). The MBD container is also weblogic 8.1.
We have 7 instances of the bean consuming messages.
Most of the messages are picked up and processed only once as expected.
But randomly we are seeing that sometimes the same message is delivered again ( Message.getJmsRedelivered = true ) eventhough it was once picked up and processed successfully once.
We are completely lost and our production machine is in big trouble as a result of this.
( Is it possible that weblogic uses unreliable UDP for acknowledging messages. If yes where do we change this setting )
Any help will be greatly appreciated
Thanks
--sony
================ejb-jar.xml BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<message-driven>
<description>DslUpdtDdpostPrcsrMDB</description>
<ejb-name>DslUpdtDdpostPrcsrMDB</ejb-name>
<ejb-class>
com.bellsouth.snt.idm.ejb.wfac.DslUpdtDdpostPrcsrMDB
</ejb-class>
<transaction-type>Container</transaction-type>
<message-selector>
<![CDATA[ idm_state = 'dsl_updt_dd_post' ]]>
</message-selector>
<acknowledge-mode>auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Queue</destination-type>
</message-driven-destination>
<env-entry>
          <env-entry-name>MDB_NAME</env-entry-name>
          <env-entry-type>java.lang.String</env-entry-type>
          <env-entry-value>dsl_updt_dd_post</env-entry-value>
</env-entry>

<resource-ref>
<res-ref-name>jms/QueueConnectionFactory</res-ref-name>
<res-type>javax.jms.QueueConnectionFactory</res-type>
<res-auth>Container</res-auth>
<res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>
</message-driven>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>DslUpdtDdpostPrcsrMDB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
================ejb-jar.xml END
================weblogic-ejb-jar.xml BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN' 'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>DslUpdtDdpostPrcsrMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>10</max-beans-in-free-pool>
<initial-beans-in-free-pool>0</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>
idm.jms.clip.WfacClipResponseQueue
</destination-jndi-name>
<connection-factory-jndi-name>
idm.jms.IdmXaJmsQueueConnectionFactory
</connection-factory-jndi-name>
</message-driven-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>
300
</trans-timeout-seconds>
</transaction-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jms/QueueConnectionFactory</res-ref-name>
<jndi-name>idm.jms.IdmXaJmsQueueConnectionFactory</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>jms.DslUpdtDdpostPrcsrMDB</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
================weblogic-ejb-jar.xml END

The transaction attribute for the MDB is set to 'Required'. Is it possible
that your application logic may process the message successfully even in
case of a transaction roll back? If the transaction rolls back, the message
will be re-delivered.
There is some docs on exactly-once processing which may help
http://e-docs.bea.com/wls/docs81/ejb/message_beans.html#1147208
--Sathish
<Sony Antony> wrote in message news:[email protected]...
( We are using weblogic 8.1 on Solaris )
We have a bunch of message driven beans with the transaction type as
'Container' and the acknowledge-mode mode as auto-acknowledge. They are
consuming messages from a weblogic Queue ( javax.jms.Queue ). The MBD
container is also weblogic 8.1.
We have 7 instances of the bean consuming messages.
Most of the messages are picked up and processed only once as expected.
But randomly we are seeing that sometimes the same message is delivered
again ( Message.getJmsRedelivered = true ) eventhough it was once picked
up and processed successfully once.
We are completely lost and our production machine is in big trouble as a
result of this.
( Is it possible that weblogic uses unreliable UDP for acknowledging
messages. If yes where do we change this setting )
Any help will be greatly appreciated
Thanks
--sony
================ejb-jar.xml BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise
JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<message-driven>
<description>DslUpdtDdpostPrcsrMDB</description>
<ejb-name>DslUpdtDdpostPrcsrMDB</ejb-name>
<ejb-class>
com.bellsouth.snt.idm.ejb.wfac.DslUpdtDdpostPrcsrMDB
</ejb-class>
<transaction-type>Container</transaction-type>
<message-selector>
<![CDATA[ idm_state = 'dsl_updt_dd_post' ]]>
</message-selector>
<acknowledge-mode>auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Queue</destination-type>
</message-driven-destination>
<env-entry>
<env-entry-name>MDB_NAME</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>dsl_updt_dd_post</env-entry-value>
</env-entry>

<resource-ref>
<res-ref-name>jms/QueueConnectionFactory</res-ref-name>
<res-type>javax.jms.QueueConnectionFactory</res-type>
<res-auth>Container</res-auth>
<res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>
</message-driven>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>DslUpdtDdpostPrcsrMDB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
================ejb-jar.xml END
================weblogic-ejb-jar.xml BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic
8.1.0 EJB//EN'
'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>DslUpdtDdpostPrcsrMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>10</max-beans-in-free-pool>
<initial-beans-in-free-pool>0</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>
idm.jms.clip.WfacClipResponseQueue
</destination-jndi-name>
<connection-factory-jndi-name>
idm.jms.IdmXaJmsQueueConnectionFactory
</connection-factory-jndi-name>
</message-driven-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>
300
</trans-timeout-seconds>
</transaction-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jms/QueueConnectionFactory</res-ref-name>
<jndi-name>idm.jms.IdmXaJmsQueueConnectionFactory</jndi-name>
</resource-description>
</reference-descriptor>
<jndi-name>jms.DslUpdtDdpostPrcsrMDB</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
================weblogic-ejb-jar.xml END

Resending same message twenty times

Have to send same message up to twenty times before it gets through. Keep getting an error pop up "Text message not sent" enough to drive you out of your mind. Am I paying $150 a month for this "premium service" I feel that Verizon is taking me for a sucker. My brother has Sprint with better phone, better customer service, and wireless service that works flawless with out issues for half price of what I pay to Verizon. I did not sign up for a third rate service. For this price that I am paying I expect best service in the world.

Have you tried a battery pull? (Remove the battery for a few minutes, then replace and restart the phone).
Have you tried reprogramming your phone using *228 option 2?
Have you tried alternate text messaging applications, or switched back to using the stock messaging app?
Have you tried a factory reset on your phone? The Droid X has recieved some major updates recently, and sometimes they can cause conflicts if you do not reset the phone.
If none of that works, it would be a good idea to contact Verizon from another phone so they can walk you through some troubleshooting steps.

TS4268 My facetime and imessage is not working in my iPad. I have used the same addresses many times and always been successful. Now will not sent message or connect? Any suggestions

My facetime and imessage not working on ipad2. I have used both up until today. Now not able to send or receive. I have phone 4s ad still has capability. What can I do. I have turned off both on both iPad and iPhone and restarted both but still nothing?

Without more specific information as to exactly what happens, you might want to start going through these troubleshooting support articles.
iOS: Troubleshooting FaceTime - Support - Apple
iOS: Troubleshooting Messages - Support - Apple

Run the same procedure many times in parallel but no more than 10 at a time

I have a table filled with individual such criteria and want to run a stored pl/sql procedure to run searches on an external server on each of them. The stored procedure deals with the API and the external server can handle the concurrency.
I want to be able to the multiple searches concurrently (ie. run the stored procedure concurrently) but no more than 10 concurrent searches at a time (There are 20,000 searches to complete).
I'm thinking this should involve AQ whose messages call "run once" event based jobs from the Scheduler (I'm running on 10g) but I am very new to Oracle and hence not sure where to begin.
If somebody could fill in my obvious blanks and give me an approach that will actually achieve my end I would be extremely grateful!
Cheers, Kim.

> I'm hoping that each of my "spawned threads" (Jobs)
will insert all outputs into the same table (I don't
mind them waiting on each other as it is the
searching that is the real bottle neck). Is this
going to be a spanner in the works?
Inserts into the same table is not a problem. The typical problem is spawning multiple copies of the same PL/SQL proc to update the same table. Somehow each PL/SQL proc needs to find itself a unique set of rows to lock and process - without impact its fellow processes. Using ROWNUM ranges for example does not work in this case.
The search implies I/O. This is good and bad.
Good in that the only real way to speed up a ton of I/O (assuming that the ton of I/O is non-negotiable and must happen) is to perform the I/O in parallel. I/O is the slowest operation on a db platform due to I/O latency. And this parallel I/O processing exactly what Oracle does with Parallel Query (PQ).
The bad is that more processes means a bigger resource footprint and one needs to figure out just what the optimal size is.
Oracle PQ has a very simplistic mechanism - it allows you to specify the number of PQs that can be spawned (and if on a a cluster, on how many nodes) per table. It also allows you to specify a PQ process pool ceiling.
But this is fairly primitive as you still need to figure out (in some way) what the optimal PQ sizes are per table.
The bad is that you either need to do something primitive and similar to PQ - which means a manual monitoring and tuning - or you need to try and automate it. Which in itself can be very interesting, but complex to develop and often quite difficult to get right.

I keep getting a message to up-date my FireFox software; but when I follow the prompts it doesn't work, and I continue to get the same message EVERY time I sign in. What's up with that?

When I start my computer (Windows) I find a message window on my Home Page (AOL) that tells me somethinglike "It is recommended that you up-date your software to Firefox 4.0 (?)". When I click on the button to up-date, it tells me that it is "connecting to server". Then I watch as the green "up-dating" bars flit across the screen...and flit across the screen...and flit across the screen...and it just keeps going.
Then I click on a button that says "Hide", assuming that the up-date is continuing to do its magic while I am busy elsewhere. This gives me a minimized button that is labelled "Software Update". When I click on that to maximize it again, I find that the "connecting to update server" just keeps going...and going...and going............. Finally I just cancel the whole process.......until next time I go online and the same window tells me to update my software.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Flashresource file missing. Mac flash pro cs5. I have reinstalled 3 times, same message each time

Hey guys, can't find help anywhere so I am asking here. I work for a small tv station who recently purchased Flash Professional to learn. They want me to learn it and create some animation for bumpers yadda yadda. Anyways here's the problem. Every time I install it it seems fine and works for a couple of days. Suddenly one day it won't open and all it says in the message is "flashresource file missing. please reinstall flash " So I say uh oh and reinstall. Works great so I think ok problem solved. Then a couple of days later it does it again. I have gone through this 5 times, each time reinstalling works for a few days or week then blammo suddenly "flashresourcefile is missing. please reinstall flash" I am completely stumped. After effects, premiere pro, soundbooth, all work great. Flash professiional is the only one doing this. HELP!!
Macbook Pro intel i7
snow leopard osx
8gb RAM
64 bit

Hi there, do you happen to have CleanMyMac installed on your machine? I had same issue with my Flash CS5, problem was CleanMyMac was cleaning few extra things that require for flash to run.
Hope that helps!

I receive the "problem loading page" error message many times daily

I frequently receive the error message "problem loading page." "Server not found... Firefox can't find the server at www.whatever.com" shows up in the window and I click the "Try Again" button. Sometimes I have to click the Try Again button several times to connect to the desired website.
What should I look at to solve this problem on my 3 office computers connected via cable to an older neatgear router?

You can check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Same message every time I open iPhoto - "use iPhoto when you connect..."

Every time I open iPhoto 6 (using a MacBook Pro) I am asked: "Do you want to use iPhoto when you connect your digital camera?" I respond "yes," only to be presented with the same question the next time I open the program. Any thoughts on why that might be and how I can stop it from asking (and remember that I want to use it with my camera)?
MacBook Pro (Dual 2.0Ghz) Mac OS X (10.4.6)

Thanks for the suggestion. I gave that a try, but no luck. Turns out, though, my main volume was corrupted--most likely related to running the public beta of Parallels Workstation (great software, but there's a reason they tell you not to run betas on production computers ). I repaired my drive using Disk Utility and that seems to have done the trick.

Subcontracting : Issue of materials to same PO many times

Dear Friends,
The issue that i have is when i create a subcontracting PO, then issue materials thro transfer posting.. 541 movemnet triggers and no accounting document gets generated.. But issue is that i can always do a second time and n number of times issue to the same subcontractoing Po. Is there any way by which this can be restricted to one time issue for PO and no repeations?
thanks
nandu

Hi,
This is the standard SAP fuctionalty, any number of times material can be issue. There is no updation in PO.
Amit

Same message many times to xi system

Similar Messages

Maybe you are looking for