Same message type in different partner profiles in ALE

Hi,
I have a situation where we need to send an IDoc of message type ORDERS to two partners of type 'LS'. Configured partner profiles in WE20 and added message type for both the partners. Also configured the condition records.Now the question is how the system will know for particular vendors a particular partner 'LS' should be chosen? In condition records we don't have option to configure a vendor for a particular logical system.
Please advice.
Regards,
Krishna

For Vendors, why are you using LS, u need to use LI.

Similar Messages

Same message type and two different IDOCS need to be triggered

Hi,
I have two idocs with same message type,the partner profile is same.
Please tell if there is any way to handle this situation without changing the message type.
Please do the needful.
Thanks,
Nivedita

Hi
We can have same message type for different idoc types.
ex:MATMAS.MATMAS01
MATMAS.MATMAS02
MATMAS.MATMAS03
In the above example MATMAS is the same message type for different idoc types.
Thanks

IDOC - same message type

hello,
I have two idoc types named MATMAS04, MATMAS05.
(to MATMAS05 i have created an extension)
they are both in the same message type MATMAS.
i need to send the two idocs to the same system.
but, in transaction WE20 when i link the message type to the system i can create only one record of the message type. in all the administration tables for IDOCs i can see that i can send to idoc types under the same essage type but WE20 prevents it.
I don't want to create a new message type.
is there a way that i can use the same message type for different idoc types?
Regards,
Roi Grosfeld

Hi Roy,
This link might help u in idoc programming
http://help.sap.com/saphelp_erp2005/helpdata/en/78/21758d51ce11d189570000e829fbbd/frameset.htm
Hope this helps,
Regards,
Nagarajan.

Can we assign same basic type to different message type in ALE

Hi Expert
can we assign same idoc type to different message type?

Hi,
Yes you can assign the one idoc type to multiple message type. Message type nothing but it represents the kind of data we transfer.But idoc type is the format in which we transfer data. As an example in Messager types "ORDERS" and "ORDRSP" both indicates the order related data, and in both case idoc type can be ORDERS01, ORDERS02.............
Thanks,
Asit Purbey.
Edited by: Asit Purbey on Oct 12, 2009 3:07 PM

IDoc processing for same message type but diff extensions

Hi
I want to send idoc when a material is changed. Everything is in place and have also done a test scenario. In partner profile i had the message type linked to basic type and tested which is fine. Now i wanted to have one more idoc created for another extension having the same basic type and linked to the same message type. Have maintained the same in WE20 but when i executed BD10 i could only see one idoc been generated but i need to see two idoc (one for basic type and another for the extended) not sure where i'm missing. any pointers on it pls?

Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas

Same message type calling 2 maps

Hi Experts,
I want to send same Idoc messagetype for two different partners and want to call different map. And these idocs are coming from same SAP system.
Let say message type Orders , first partner PARTNER01 and second partner PARTNER02.
For PARTNER01 partner message mapping name is MM1
For PARTNER02 partner message mapping name is MM2.
When SAP is sending the message for partner PARTNER01 it should call MM1 and it should not call MM2.
Output files are also going to two different system.
Could you please let me what are the configurations are required in ID?
Thanks in advance for your valuable suggestion.
Regards,
Shubhankar

Hi Shubhankar !
You should enter your receivers (partner01 and partner02) in the receivers table of the receiver determination object. Here you can use the condition editor to detect which system should be the receiver based on content (payload, headers, etc.). Then to specify different mappings, you should create one interface determination object for each receiver system, in each interface determination object you should specify the interface mapping to be used. Please create one interface mapping object in repository for each mapping program (mm1 and mm2).
Regards,
Matias.

Same message type

Hi,
is it possible to use the same message types in two different BPEL processes ?
If yes, could you show me an example ?
thank you & bye

Yes of course, just make sure the xsd's match. You can make sure the xsd's are the same in those BPEL processes by:
a) copy the .xsd's yourselves in each BPEL process (this violates the Edsger W. Dijkstra's design principle 'Avoid duplication of volatile information')
b) use a seperate BPEL process for storing all the common xsd's (unfortuately this requires that this process is deployed to the server before you can compile the other BPEL projects).
c) use svn:externals or a custom copy script that will make sure that there is only one source for the XSD's
The IT-eye article on Generate facade classes for multiple Oracle BPEL usertask payload structures at once might be usefull.
Regards,
PieterB

How to assign different Message Type to different Doc. Types

Hi,
Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned.
Lucky

hi there
follow this path
spro - materials management - purchasing - messages - output cntrol - message types - define message types for p/o
then
spro - materials management - purchasing - messages - output cntrol - message determination schemas - define message determination schemas for purchase order
then
go to
mn04
give doc type - enter
enter partner role & other parametrs

Can you use home share where there are 2 itunes on the same computer but under different user profiles?

Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?

check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

Using the same Message Type

Is it possible to use the same Message Type in several Message Interfaces?
I have BPM which is using AbstractInterface.
I created this interface based on my Message Type.
I have got mapping exeption. Maybe it is because of using the same message type.

> Is it possible to use the same Message Type in
> several Message Interfaces?
sure!
> I have got mapping exeption. Maybe it is because of
> using the same message type.
I don't think so.
Stefan

Multiple files (with same message type) into a single file

Dear All,
I am having multiple files(same message type) with details like header data and its line item details in each file. The structure of all the files will be:
File1    File2   File3
H1        H2      H3
L1         L1      L1
L2
L3
Now my requirement is that after every 10 hours all the files should be picked and merged (append) into a single file as target file. The structure of output file will be now like
H1
L1
L2
L3
H2
L1
H3
L1
Kindly guide on how to proceed on this with BPM or without BPM
Regards,
NJ

Now my requirement is that after every 10 hours all the files should be picked and merged
(append) into a single file as target file.
Check the use of "Availability Time Planning" of the adapter in your case
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
If your requirement is to append you can do so by using the File Construction mode as Append in receiver File adapter
If your req is to do a N:1 mapping (i.e. merger) then develop a mapping program accordingly...
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 3, 2009 10:30 AM

Multiple customers for same message type "invoic" and idoc type "invoic02"

Dear Experts,
I have SAP ALE process configured for single customer u2018Au2019 where I send invoic02 idoc (message type invoic) to the customer via PI server. Now I need to add one more customer u2018Bu2019 which require recepient determination. I am not sure whether this resolution of customer address at PI level or config is required at R3 itself.
I tried to maintain partner profile type as KU but it generates the error "No partner profile is maintained". For existing customer u2018Au2019 I am keeping the partner profile type LS.
I want to know the following:
a.Whether the recipient determination at R3 (config of partner profile we20)- if so what are the essential steps. Do I really need to shift partner profile type as KU?
b.Whether config is required at PI level itself- if so is there any pre-requisite config in R3 to support that in PI.
I hope my question is clear since this is my maiden attempt to seek solution from expert group.
Regards & Thanks

Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas

Multiple IDOCS of same message type To Single File

Hi Sap All.
here i have got a tricky situation of sending Multiple IDOC's of same type to a Single File via PI.
the Integration architect has created an Integration Gudeline of how to do this.
from the SAP-ECC side the follwing below are the steps thatr he mentioned
To allow IDOCu2019s to be processed sequentially in a queue, the queue processing option on the partner profile must be selected. In addition the rule name which is used to create queue names must be specified.
NB On the partner profile (for the partner / message type) you must also set the output mode as collect IDOCu2019s (it cannot be set to transfer immediately) u2013 This means the IDOCu2019s are created but not sent to out (to SAP PI)
As standard there are two rule names delivered CONSTANT:EDIQUEUE and FIRST_16_OF_MESTYP. These rule names are linked to a SAP function module and therefore custom queue names can be build either as an u201Chardcodedu201D name or based on the data in the IDOC.
The program RSEOUT00 should be run to transfer the IDOCu2019s to PI. The IDOCu2019s will be placed in the SAP ERP qRFC (rather than the standard RFC)
My Questions :
1. how and where we can select the Queue Processing option on partner profile in SAP-ECC as mentioned above
2.how and where we can define the Rule name as mentioned above
3.how and where we can set the output mode as Collect IDOC's in SAP-ECC as mentioned above
4.what does the EDIQUEUE and FIRST_16_OF_MESTYP will do and how they linked to SAP Function modules
will be waiitng for a the best solutions.
Regards.
Varma

/people/michal.krawczyk2/blog/2009/05/21/xipi-collecting-idocs--possible-ways-with-pros-and-cons--5-ways - you will need to do a collect

How do you change message type linked to partner in WE20?

Good Morning,
May please have a piece of info about this subject:
In we20 (partner Profiles) i can see that a partner of type LS (Logical System)
has, as Outbound parameters, the CRMXIF_PARTNER_SAVE Message type.
I want to change that to CRMXIF_PARTNER_SAVE_M Message type and also add another Message type, that is to say CRMXIF_PARTNER_REL_SAVE_M.
Notwithstanding, I am not able to edit the grid.
Am I lacking any of the authorizations? Or is it the wrong place to do that?
Thank you very much
Riccardo

<i>Hai,
you can open tcode we20 and make it in edit mode or other wise you can add a outbound parameter using the add button shown bellow the outbound parameter grid.
regards,
Gopinathan.
</i>
Hello,
this seems the right direction.
Yet, in my right - click menu, I have these choices:
- Help
- Choose
- Back
- Display
- Cancel
- Exit
- Check
- IDoc Output
- Tree output
- Position
- Expand subtree
- Collapse subtree
In the "Edit" menu I have
- Position
- Expand subtree
- Collapse subtree
If I click on "position", I just have a "choose partner" window, but then I do not have the "choose message type" or anything that helps me choose the messages...
Does this mean I am lacking any authorizations?
thanks a lot, Riccardo

Same message type in Diffrent Interface IDoc-HRMD_A

Hi All.
i am using standard message type HRMD_A iin one IDoc and have done coding in one of the Function Exit ..EXIT_SAPLRHA0_001
now if some other interface is also running using same satndard message type then how can i restritct my EXIT code to run for the 1st one only..like 1st one is running for country say Alaska and 2nd one for Ohio then how to make a check to diffrentiate between these two...as there is no Control data is populated before triggering this Function exit.i have done filteration in the exit like it will pass the data for the Alaska country only rest will be filtered out.but for the Ohio i want some other filyteration.Please assist.
Mona singh.

Hi Mona,
One question, just to see if I understood, the filter you want to use is by Company Code? or which is the field you want to use as a filter? You want some information to be sent to the destination and the other don't ?
Or you just want that the internal code in that Exit is to be executed for especific filter?
I ask, because there is a way to filter by company code the whole IDOC.
Regards
Edith

Same message type in different partner profiles in ALE

Similar Messages

Maybe you are looking for