Same numbers in cProject and PS

Hello,
when I create a new project and transfer it to PS the numbers are completly different. could someone explain me how I get the same numbers/id in cProjects and PS?
Thx, Vanessa

Hi Vanessa,
There is a BADI in ERP system: GCC_PS_PROJECT_LABEL, implementation CPRO_PROJECT_LABEL.
Here you can enhance method GET_WBS_ELEMENT at the end, to change WBS name.
Matthias

Similar Messages

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Photos in my from my iPhone have same numbering as photos from my dig camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. Help?

Photos in my from my iPhone have the same numbering as photos from my digital camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future? I'm really hoping I don't have to go through and manually rename every single picture. Thanks.

How are you backing up the photos? The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
You can use a backup application that does incremental backups. Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro. The lower cost version, Synk, will do the same job. Other similar apps can be found at MacUpdate.com.
OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name. I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg. File renaming apps can also be found at MacUpdate.com. Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
OT

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

My mail outbox wont go online. Inboxes work fine. Just upgraded my old iMac to OS 10.6.8, kept my internet provider, entered all the same numbers and settings so can't figure out why mail won't go out. Help. S.T.

My eMail outbox won't go online. I can't send eMail messages but I am currently receiving my messages.
Just upgraded my older iMac to 10.6.8 but kept the same eMail addresses (Google), the same provider (Cricket Broadband), and entered all the same settings in Mail Preferences and Accounts as before.
Any suggestions as how to get my outbox online so I can send mail?
ST

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
old: http://support.apple.com/kb/TS1482
What SMTP setting do you have for gMail?
Did you get rid of any old passwords in Keychain Access?

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?
I have tried to convert the pdf to Word instead but same difficulty with numbers: look like numbers but not usable for calculations

Excel has a 'text to numbers' function, I would use that.
Convert text to numbers. Microsoft Excel.

What is difference between Numbers for Mac and for iPod Touch?

Trying to decide pros/cons of getting Numbers for my iMac vs. just for my iPod Touch? Obviously, one is cheaper than the other. Dumb question, but I guess I cannot use Numbers downloaded from App Store on my iMac; just on my iPod Touch? And, can I just buy Numbers for iMac; seems only option is to buy as part of package under iWorks (don't need Pages or Keynote for the home).

(1) Numbers for iOS and Numbers for OSX are completely different products building files using the same format.
(2) You may buy Numbers as a single application thru Mac App Store. The application Mac App Store is delivered with Lion.
Yvan KOENIG (VALLAURIS, France) samedi 14 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Using Numbers with Lion and iOS

Hi,
I'm interested in using Numbers to share and update documents across my Apple devices (iMac, Macbook Pro, iPhone and iPad) via iCloud.
I have Numbers 09 installed on my iMac and Macbook.
I get that I will need to install Numbers on my iPhone and iPad.
My questions are the following:
Do I need to update my Numbers to the '11 version in order to share any documents generated on my iMac/Macbook via iCloud?
If so, do I need to purchase separate copies of Numbers for the Lion machines and for the iOS machines, or will the same copy of the software be usable among the four machines?
Thanks!

V.G.,
The iOS and OSX versions are sold separately. There is no '11 version of iWork, if that's what you are asking about. iWork '09 is the most recent, but there have been many free updates along the way.
A single iOS purchase will be good for all your iOS devices. For OSX, if you used the MacAppStore, you purchase only once for all computers on your account. If you purchased from the Apple store onlne or from a retailer, it's a single user license or a family license, so you that would determine if one copy would be enough.
Jerry

How to Cancel same numbered outgoing Invoices through J1IH?

Hi Friends,
There are 2 Invoices created with the same numbers -
one for Domestic and the Second for Export,
For Cancelling the Export Excise Invoice I am using J1IH, problem is the first number i.e. the domestic number is being picked and I am not being able to delete the required one which comes as Second - inspite of taking the Internal Document Number.
Require Help
Andy

1. First cancel the GR.
2. Cancel the Part 1 entry.
3. In J1iex - > Change, you need to maintain reason for cancellation in header misc tab. For this you may need to do config in Tax on Goods Movements -> India -> Business Transactions -> Incoming Excise Invoices -> Maintain Rejection Codes. Save the invoice in j1iex.
4. In j1iex -> Post , you can now post the invoice. Simulate to see that accounting entries are reversed.
5. Then in j1iex -> Cancel, cancel the invoice to mark the status as 'Cancelled' if you need to use the invoice number and date again for another GR.
Regards
Hemant

HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

CProjects and external ressources

Hello community,
I would like to know how you are using external ressource (material and human ressources) in cProjects in the normal business? Are you using SRM and are you using CATS or the mm's "activity confirmation" to enter the working time?
What does a normal process looks like?
Thx in advance,
Max

Hi,
You can use following steps in case of using CATS and MM.
Make External resources as a business partner in cProject by BP role as a contractor or if you are importing from HR then external resources can be classified by some specific no range.
Make resources as a Vendor in MM, You need to pay to them so raise PO and link to Internal order of cProjects. same will work for material too.
You will be able to see Project worklist and corresponding PO no in CATS with ref to EMPNO.
Resources has to fill the time against the activity and time can be transfer to cProject and MM from CATS which will help for paying to contractor and Projct costing.
There is possiblity by Using SRM too. Need to check for the same.
Regards,
Karan Hon.
Award if useful.

CProject and Virtual Room Integration

Hi,
I am having some issues trying to integrate cProjects with Virtual Rooms from EP. Some questions:
- In creating the http connection to the external server, where can I get the information for target host and port? Is this simply the EP host and port number?
i.e.: if my EP url goes like '192.168.1.1:8010/irj/portal', my target host is '192.168.1.1' and port is '8010'?
- In creating the Logical Portal, under the Call parameters tab, do I just have to reference the HTTP connection to External Server object as created in SM59?
EP has been installed on the same server as cProjects with the same system ID, as an add-on installation. Will there be any special considerations to take note of because of this?
Thanks,
Ju Hwa

Hello Ju Hwa,
I am facing similar doubts...were you able to resolve them? If so, could you tell me how?
Regards,
Aditi

PS roles for making object links between cProjects and PS

Hello to everybody!
Does anybody could give me a favour and tell which role I should grant to the user in order to allow him make object links between cprojects and PS elements from cProjects. I have already granted authorization to CJ01, CJ02, CJ03 and CJ20N transactions, but JA 027 == No authorization for action Display === error message still occurs. SU53 shows that everything is OK.
Thank you.

Hi,
I´ve the same problem, I´m in tx CJ20N but I don´t know how to add my user in Access Control List (ACL) in CJ20N
Could you explain me how I can do that?
thnaks a lot and best regards, Sapera

CProjects And RPM 5.0 with NWBC

Hi,
Why is FPM used as the framwork with NWBC for cProjects And RPM 5.0. Can any other frameworks be used for cPro and RPM 5.0 with NWBC? What is the technical feasibility of using FPM with NWBC??
Thanks And Regards,
Anu Shrinidhi

Hi,
several answers to your inquiry:
You can use SAP Portfolio and Project Management 5.0 with
- NWBC for HTML
- NWBC for Desktop
- SAP Enterprise Portal.
SAP Portfolio and Project Management 5.0 uses FPM (FloorPlan Manager), that's right, but this is not depending on NWBC (nor vice versa).
The UI guidelines valid for SAP Portfolio and Project Management 5.0 are the same as for the current release of the whole SAP Buisness Suite, FPM usage is one part of this guideline.
It is not possible to use SAP Portfolio and Project Management 5.0 without FPM (at least not without big modifications).
"SAP Portfolio and Project Management 5.0" is the successor of "cProjects 4.5" and "SAP RPM 4.5". This is the official name. There is no product or application called "cProjects 5.0" or "SAP RPM 5.0".
For features, functions, concepts, etc. of FPM; please echk the FPM SDN Forum:
[Floorplan Manager for Web Dynpro ABAP|Floorplan Manager for Web Dynpro ABAP]
Kind regards,
Florian

I have downloaded Mavericks OSX 10.9 and also Numbers 3.0. I have used Numbers 3.0 on some of my files. Today Apple advised of updates to my computer, which included Numbers. I now find that my computer is running Numbers 0.9 and I cannot access my rev

I have downloaded Mavericks OSX 10.9 and Numbers 3.0. I have revised some of my Numbers files. Today Apple advised of Updates for my computer, which I downloaded. I now find that I am running Numbers 09 on my computer and cannot access my revised Numbers files without going to the App Store and buying Numbers 3.0 for $19.99. Has anyone else run into this problem?

Something similar happened to me: I opened a spreadsheet that I worked on yesterday and received an error message saying that I needed to load a new version of Numbers. That would be the same new version that I had downloaded the day before. It sent me to the App Store where I was told that no new software was available for me.
I noticed that I had the older version of Numbers still open in my dock. I removed it, opened Numbers 3.0, and my spreadsheet appeared.
Not sure that will help in your situation, but I wish you well.

Same numbers in cProject and PS

Similar Messages

Maybe you are looking for