Same old problem.. slow connection

Hello, 
I have just moved into a new block of newly built flats, I signed up to 40mbit ADSL, I keep getting connection problems on my ps3 and I'm downloading at around 600kb/s.
Something isn't right, when I called BT the stupid woman tried to fob me off basically everything is fine and its probably just the connection between the cat cable connecting my PS3 and my wireless connection to both of my laptops . Here are my speed test;
 Download speedachieved during the test was - 2458 Kbps
 For your connection, the acceptable range of speeds is 600-7150 Kbps.
 Additional Information:
 Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
 IP Profile for your line is - 7150 Kbps
just to add I've had the broadband for two weeks now

As john says most things look OK for an 8Meg connection synch and profile are as good as it will be but with that attenuation 24, sn margin 7.8 and profile 7150 I think if speed test is working ok you should see near twice that download
on speed test,  but your 600 KB (bytes not bits ) real world download   is ok 600 x 8 =4800
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

  • TS2998 Same old problem, Apple vs. Cox

    Same old problem with Mountain Lion using Cox server. Can receive email in MAC MAIL but not connect to send. Fix?
    All settings are per Cox support information.

    Please help with sorting out the issues with the Cox email services?   Sorry; I'm just not that powerful. 
    If you're set up per the published specs (and those aren't easy to find), then Cox (mail or doc or the Cox network) is probably broken.  What's posted at various of the Cox support sites indicates that the SMTP send path is either TCP 587 with SSL/TLS enabled or TCP port 465 with SSL/TLS enabled.  Cox does appear to use different SMTP mail servers, depending on your service class and your particular geographic location.  Cox also appears to use POP and not IMAP, and specifically uses POP3 Port 995 on pop.cox.net; that's the SSL/TLS port for POP3.
    What to do?  Work with someone that you can share your credentials with, verify the error, and (if it can't be resolved) contact Cox and work through this error with them.
    Or as an alternative, don't use Cox for your mail.  I deliberately chose a mail hosting provider, and not the ISP I work with, for mail services.  That mail hosting move was easily very affordable, and the mail provider quickly answers the (few) support tickets I've needed very promptly.   In other words, the ISP deals with the network wiring, and the mail hosting provider deals with the mail servers.  And mail works.
    Or yes, you can use Google or another (free) mail provider, but - and with the providers of any of the free services in general - getting support when something goes weird is far from certain.

  • Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting?

    Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?

    One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit.  ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering.  I would suggest you call your ISP's Technical Support and inquire about this possibility.

  • Linkification (any version) does not work with FF9.0.1. Here we go again! Same old problem. Why don't you guys develop a permanent fix??!!! Don

    Here we go again. Same old problem with FF updates. FF9.x.x will not allow clickable internet links. They are dead when typed. ALL IE versions have clickable links BUILT IN! Why can't you do it??? Don't blame it on "third party add on incompatiblity." It's not their fault. It is YOUR fault for not including it. Do not blame users either.
    xpi files are not compatible with FF9.x.x even when dragged on to it

    '''''Linkification''''' was not developed by Mozilla.
    *The third party developer appears to have abandoned the Add-on (no longer updates it).
    *The last update available on the Mozilla Firefox Add-ons site ( https://addons.mozilla.org/en-US/firefox/addon/linkification/ ) was made compatible only through Firefox 3.6.x
    *The developer posted version 1.3.9 on his/her own site which was made compatible through Firefox 4
    *'''''Read the comments section on the Add-ons page for suggestions.'''''
    **I would NOT download from another site as you do not know what you might be getting.
    **You can install the following and force compatibility in Add-ons > Extensions
    ***https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=ss
    **Under "Reviews", click "See all ###user reviews". The suggestion ''by marwn098 on November 11, 2011'' is the only one that I would recommend.
    ***Link to that suggestion --> https://addons.mozilla.org/en-US/firefox/addon/linkification/reviews/321220/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Have new MC544LL/A and same old problem"The ipod cannot be synced. A duplicate filename was specified."Is this a "apple or Itune" problem?

    Have new MC544LL/A and same old problem"The ipod cannot be synced. A duplicate filename was specified."Is this a "apple or Itune" problem?

    I fought this problem for WEEKS with no success.  iTunes on Windows 7 x64.  I tried running it as Administrator.  I tried every fix I could find here and on Youtube and nothing.  Any time I was in iTunes and switched focus to another Window like Outlook or something it would pop this error message up again.  I reinstalled iTunes from scratch.  This did NOT fix it, but it gave me a clue.  I figured it had to be my iTunes library which is stored on an external HD.
    After poking around in the library for a while I thought it might be a file that had been set to Read Only so I did an "attrib -r e:\itunes /s"  to clear all of them all.  This wasn't the problem but it alerted me to a file it couldn't clear.  The file was iT.tmp and it couln't clear that because the file was corrupt.  I deleted it but that still didn't fix it.
    I finally did a "chkdsk e:\itunes /f" and let it run through.  It found the error in iT.tmp, fixed it and now iTunes works fine again.

  • New iPhone 4....same old problems

    Hi folks, I'm one of the many disappointed iPhone4 customers and I hope you can help me out here. Yesterday I got my new iPhone4 and as I was expecting I have the common problems almost everybody else has: poor reception/lost of reception almost all the time. The previous iPhone 3G was working great but the new one is not. Mine came bundled with iOS 4.1. As I have read in this forums and many others there seem to be a bug in this version of the OS that causes poor reception and incorrect signal strength bars. I was wondering whether it possible to install the previous version of the OS, namely, iOS 4.0.5 (i guess that's the correct version number?) because I've heard that that particular version doesn't have this problem (I'm aware I will lose things like HDR but hey, I have a real camera for that so I don't care if the iPhone has or not HDR capabilities).
    Is that possible? if so, how can I do it?
    thanks,

    Hi Malcolm,
    You are reading reports from only the users who have problems. Users without problems don't >complain.
    This is a weak argument. What should I do? read the complains of people whose devices work fine? I'm sorry but your answer to that sentence doesn't hold. Whenever you have problems with something you look for advice and comments of people that have the same problems. That's the way human problem solving works.
    When the next version comes out you will see many people wanting to return to 4.1, which will
    have suddenly become perfect.
    Again, this is a thin argument. As customers who pay a LOT of many for electronic devices we want things to be functional. So, with the release of a new driver/OS version we expect the old problems to go away and, yes, new problems will come along because that's just the way software development works. So, if iOS 4.1 was supposed to solve reception problems how does Apple explains that after releasing v4.1 those problems are still here? Many people have reception problems, just read the forums. Again, we don't just a fancy electronic device, we want a functional thing. It's like buying an expensive rolex watch that does everything except telling you the time. Or having a Ferrari with a broken engine.
    Thanks for the feedback! I'll keep testing the iPhone and if it doesn't get better in a week I'm afraid I'm gonna have to return it and keep using the old 3G until reception problems with the iPhone 4 are solved.

  • CS2 Quits constantly, new machine, same old problem

    Hello.
    my g5 quad was replaced by apple with a 3.0GHz MacPro and while running certain apps hard, like CS2, Adobe Camera Raw, or Adobe Bridge, they will quit unexpectedly just as they did on the defunct g5 we had.
    I have tried everything, just as i did with my Quad, to repair the situation. reseating the RAM, resetting the PRAM, deleting the cache, running DU to repair permissions/repair the disk, running AHT in loop, AND starting with a fresh OS install. none of my files aside from my music and my photos are from the g5 i had. this is not an importing anomaly.
    i went to the apple store and they told me that this may be because it is running in Rosetta. i also asked them why my 2 year old PC with an single core AMD Athlon64 3500 and 4 GB of PC3200 can run CS2 so much faster than the MacPro (ridiculous to watch but the PC is actually 2 times faster than the apple if set to the same task at the same time), and they said this may also be due to Rosetta and/or leopard not yet being here. i have been assured that Leopard and CS3 will fix all this. i don't know what to do. i don't want to bring the machine back again. i feel so badly because those guys have tried so hard to help us because they know it is (was) our business machine and that we bought it to speed up our work flow. unfortunately, i don't think the machine is capable of that kind of thing, and i don't trust it to do much anymore. Apple has been very kind to us, and so have their people, but the machines we have used have not been quite so kind or helpful once our troubles began.
    i'm not into fighting the holiday crowds for parking and lugging a 40 pound machine around... and frankly, i would be pretty upset if i were on the apple team and saw me back at the store with the brand new machine after all the hard work they put in to help us.
    i've stopped using the apple machine as i am afraid to push it hard for my business or multi-task. as a photographer, i am certain that i am not pushing it as hard as a videographer would be. but, i can't run more than CS2 and maybe a web browser (firefox 2.0 is very slow and unresponsive on this machine) without it slowing down... or crashing a program altogether and losing all my work. CS2 is what i use...
    so, i've resumed work on my windows machine, and basically use the apple as a storage device/paper weight. that was a $5000+ mistake our business has made, and it's tough to recover from that in my business with one PC based machine that works and an awfully expensive apple paperweight.
    NED SNOWING wrote back to me and had this to say:
    "hey said this may also be due to Rosetta and/or leopard not yet being here. i have been assured that Leopard and CS3 will fix all this.
    This is correct. As all PowerPC applications, like Adobe CS2, have to run through a software "translation" layer everything is slowed down for that application. This is why CS2 apllications run no better than the G5s on the Mac Pro. However, once the like of Adobe etc release their applications as Universal or Intel binary applications you'll see the performance skyrocket forward.
    Due to Apple's accelerated transition the like of Adobe have in actual fact been caught a little short in their developement timings. Be aware that the use of Rosetta for applications is only temporary.
    By the way, there's no reason that you could run Windows under Boot Camp on the Mac Pro in the meantime.
    Mac Pro 2.66GHz 3GB/5x300GB (see bio)/ATi X1900 XT/AE/BT ; Dell 2405FPW Mac OS X (10.4.8) MacBook Pro 15.4" C2D 2.16GHz 2GB/120GB/Glossy ; Mac mini CD 1.66GHz 2GB/80GB/SD"
    My question stands at this:
    still, i do not understand why the machine is so dramatically slower than my 2 year old PC with a single core AMD64 XP3500 and 4 GB of PC3200 AND 2 near full 80GB IDE hard drives.
    the Quad was ridiculously fast. it was so fast that i thought there was something worng with it. i never wanted to use my windows machine again and then it failed and failed and deleted our data and failed again...
    if i am understanding you correctly, you're saying that this machine SHOULD run CS2 at a rate on par at least with the Quad... well, i invite you to show me what i am doing wrong, PLEASE. The failure of the Quad crippled our business, and now this machine has put us at a $5000+ deficit without anything to show for it. It takes me more time to use the Mac than my PC… IN CS2… and your statement is that the MacPro should run at speeds equal to or at least comparable to the g5. Mine doesn’t. and I am not at all happy about having to bring a brand new machine they replaced along with my PC to the store to demonstrate how slow their stuff is when the Quad blew this heap away AND could multitask. The Apple guys at the store have been great, and this just plain stinks to have to bring back a machine that's supposed to be working and isn't, AFTER being replaced. it's pretty damned embarrassing.
    no errors in AHT, Mem test is fine. 2 500GB hard drives, primary drive has 400GB free when i am not working on a project. 250GB when i am. all my stuff is backed up on Terabyte Servers. the replacement machine they gave us had 2GB of RAM (4-512 sticks) and the Apple Store installed 2 1GB sticks as the machine we turned in was equipped as such.
    please, please, please help me.

    while running certain apps hard, like CS2, Adobe Camera Raw, or Adobe Bridge, they will quit unexpectedly just as they did on the defunct g5 we had.
    The I would say that you're installing some software that is problematic else you used the Migration Assistant to get your data from one to the other. Either way, I would clean install the system and install a minimum of software to ensure that the system is stable before adding to it. I find it hugely unlikely that two completely different systems to exhibit the exact same issue.
    Additionally, if you have installed Adobe Version Cue 2 then that might well be your problem.
    still, i do not understand why the machine is so dramatically slower than my 2 year old PC with a single core AMD64 XP3500 and 4 GB of PC3200 AND 2 near full 80GB IDE hard drives.
    Have you ever had a conversation with someone with whom you did not have a common language and had to use a translator? This is the situation that Apple has with Rosetta (where Rosetta is the translator). If you take into account these mechanics you can't expect this scenario to have a conversation as quick as two people talking in a common language, even if one of the parties isn't very good at that language.
    if i am understanding you correctly, you're saying that this machine SHOULD run CS2 at a rate on par at least with the Quad
    No… I'm not saying that. What I said was that the Mac Pro should perform equivalently to a low end G5. I would expect a 3GHz MP to be roughly equivalent to a 2.3GHz DC PowerMac G5 in the best case. To expect more than that with Rosetta in the picture would be rather delusional.
    I am not at all happy about having to bring a brand new machine they replaced along with my PC to the store to demonstrate how slow their stuff is when the Quad blew this heap away AND could multitask.
    I wouldn't be best pleased about that either although I don't really know what you're expecting any of us to say. As I said earlier my best advise would be to erase the boot/application drive and then install everything new and from the original CDs/DVDs. If under the simplest setup possible you still experience crashing then I would contact Adobe or which ever software developer for the problematic application(s).
    Otherwise, just return the thing, eat the restocking fee and wait until Adobe CS3 is released.

  • The same old problem with temperatures (K8N Neo Platinum)

    I have problems since bios v1.0 on my K8N Neo Platinum with temeparutes.
    I have installed a Prometeia Mach II St colling unit
    I Tested the v1.0 official bios, the temperature was allways -65º full ou idle, what it is impossivel.
    In the moment i flashed the bios to v1.2b5, temperature changed to 49º, and I did not move in nothing. The same temperature appears in all bios since v1.2b5. Now I have the v1.4b2 bios
    Sorry the Bad English

    Here are the instructions to reflash the BIOS for your K8 Neo. I am currently running ver.1.4 with little problems. My only snafu is the LED for my optical mouse stays lit even when system is off, however I have no RAID, Ethernet, onboard sound, or SATA drives. I have just a simple basic system, and I don't overclock. My board is the K8 Neo Platinum socket 754, with an AMD64 3000+. YOU MUST HAVE A FLOPPY DRIVE CONNECTED TO SYSTEM FOR THESE INSTRUCTIONS TO WORK!.
    Flashing BIOS on K8 Neo per MSI. READ ALL instructions before starting.
    1.Check your BIOS for flashing protection and disable it.
    2. Know your board model#. a. Open case and find model# on the board between the PCI slots, or b., boot system and at first DOS screen you will see 'W7030ver1.4122101'. This means you have a MSI model 7030 motherboard with BIOS version 1.4 issued on 12/21/01.
    3.Download the Bios that matches your motherboard model and version#.(I believe the Neo Plat had two versions, 1.0 and 1.1). I have 1.0. It will be found between the PCI slots. Create a folder on C: drive labeled 'C:\TEST'
    4.EXtract the BIOS file to C:\TEST folder.
    5.Create a boot floppy. For XP, at Desktop double click My Computer, right click floppy drive, click Format to format the disk, then click 'Create MS-DOS Boot Disk'.
    6. Set boot order to floppy. Hit F11 to select boot device.
    7. Insert boot floppy and restart system.
    8. At A:\ prompt type in the following,
    C:\ (enter)
    cd\TEST(enter)
    awdfl833c(space)w7030nms.130
    The w7030nms.130 is the BIOS file name you downloaded to C:\TEST. Keep in mind you're dealing with DOS file names, so you may need to open a DOS window in Windows, and search C drive for the TEST folder and write down the DOS file name of the BIOS file BEFORE you start the BIOS update.
    9. Reboot when prompted. It shouldn't take more than 10 seconds to update the BIOS.

  • Same old problem

    I have an iBook G4, and a cable modem that is connected to an Airport Extreme. This set-up functions very well and I am able to move anywehre in my apartment and remain wirelessly connected to the internet. I also have an Airport Express, which is plugged into the wall of a different room. A set of speakers is plugged into it. The problems with the AE are numerous, and because they are intermittent, I can never get any service person to see the problem in action. The issues are these:
    1. Music frequently stops playing for no apparent reason. The AE light remins green, signal strength is indicated to be strong, and if I just hit "play" again in itunes, it starts right up again, until the next time this problem happens (5 seconds-10 mintues later). It is rare that I get an uninterrupted 30 minutes of music playing.
    2. Frequently (once a day, sometimes more), the amber light starts blinking. I can get it to work again if I perform a hard reset, but this is getting annoying to do daily.
    Any suggestions? Thanks!

    It sounds like an interference issue.
    AirPort: Potential sources of interference
    http://docs.info.apple.com/article.html?artnum=58543
    iFelix

  • Same old problem in Lion Mail with Fonts

    Apple please let us finaly define a standard font familiy for new emails! Since years this is a very simple need from so many users. The problem is, that the sended emails looks very unprofessional in other clients like Outlook, because there is NO font family definition in the source code of the email - the result is, that the standard font of the client will be displayed to the user. In Outlook this is Times New Roman for example.
    To write the text first and THEN change the format is NO solution for a everday 100 times process!
    The old trick with the definition of a font in the signature and overwrite the first line with the content text also no longer works with Lion, because the cursor goes somewhere by hitting enter on the keyboard if I am in the "signature area".

    Yeeeeees. Please - this is unbeleiveably frustrating. Apple, this is the longest standing bug I am aware of.

  • New PC and yet same old problems

    Hi,
    I've just put together the PC in my signature and have already run into a bunch of problems. First and most irritatingly - this is now the third PC i've put together that has problems with jumpy graphics in games. It never really bothered me before because i'm not big on games and tend to use my PC for video encoding etc etc. But this latest PC i built (on a budget) for games as Half Life 2 will arrive soon i thought i'd start gaming again!  
    Anyway, a little tricky to describe but i hope you'll understand what i mean when i say the graphics are jumpy or jerky. They sort of stutter. Now this being the third PC i've had with the same problem will lead you assume i have a nasty power problem in my house. Well no, cos thats what i thought. My power supply is very good and to be extra careful all my PC's now have a UPS with voltage regulators onboard.
    I thought this could be a memory issue (AMD 64 platforms seem to have a fair few problems with memory) but memtest cleared my Mushkin memory at stock settings after close to 8 hours testing.
    So i've done some benchmarking and testing and thought you may be interested in the results. PCMark04 - All my results check very well compared to similar systems except my CPU score, that was lower than expected. Another interesting point would be my Sandra scores, again all scores faired well except the CPU Multi media score that was lower than an XP 2000+. Hmmmm....  
    3dMark etc is all good (again except CPU scores in 3DMARK03) so i don't know what more to say about that. Heat is a possibility, my readings show the CPU runs @ 43c idle, my case tells me the system runs at ~28c, but i don't know if that CPU reading is accurate because i haven't updated the BIOS yet, which leads me onto my next problem...
    I can't seem to update the BIOS because when i get to the A:\ prompt in DOS i can't get to any other drive. i.e. i can't type in "c:" to change drive so i can update the BIOS which is really annoying. I'm not sure whats up here - probably something setup wrong in the BIOS but i wouldn't know.  
    Thirdly, more of a question than me moaning, is it ok to have the SATA controller sharing an IRQ? I will post my IRQ's at the bottom of this post.
    But if this graphics problem has happened to me three out of three times, then i must be doing something wrong each time. Well plenty to think about and there are probably some very good explanations.
    Thanks for your time,
    bounty

    Quote
    Originally posted by bounty
    Hey thanks for your replies.
    I'm running the latest BIOS available, latest drivers etc and have installed the AMD drivers too. I'm running my SATA drive on SATA 1 and have now disabled 3 and 4 as well as put the AGP frequency up to 67. I'm not OCing anything and no equipment has ever been used in all 3 machines.
    I tried turning off fast writes and lowering the hardware acceleration and believe me this is like the 4th install of windows i've done trying to sort this problem out. Still no prevail though.
    What about the harddrive flickering, should it be doing that whilst i play games?
    You should be using Sata 3 or 4 , not 1 or 2.
    Also DIMM 1 and 2 for memory (those closest to the CPU)
    if you are using an Nvidia card the agp fastwrites is usually what causes hangs, and freezing.
    Strange that you should build three PCs all with the same problem.. What is the common factor here? if its the Video card, i suggest getting a new one.

  • The same old problems and no supp

    I can't believe that in the past 5 years the support is as bad as ever! I'm stlill getting the same error in software for the Audigy 2 zs as I did for the 5. soundblaster li've card. Don't your employees give a **bleep**? Obviously not! I'm sure I won't be buying one of these pathetic cards again! (Good hardware, shame about the software and the support!) Shame on you Creative! Disgusting, pathetic support. Don't you have any competent s/w engineers left? I guess QUALITY is a word that escapes you! Hints -. Supply decent, comprehensi've, support. 2. Supply drivers that actually work. 3. Gi've INFORMATIVE error messages when they don't. 4. Distribute s/w that actually shuts the Feff'ing systems down properly!!!

    Agree.
    But maybe Creative have no money to do that (sorry, late April fool).
    Ahem, Creative definitvely need to better normalize its software production and to hear for customers needs : man, I never used my RM500 because it won't do what it was expected correctly; and I'm always waiting wavestudio to support WAVE_EXTENSIBLE as mediasource can (will begin to see how it works and build my own wave editor if I really have to...). Oh! and what about the stand-alone package? it's here, but never it was officialised!

  • New email webpages have same old problem and Customer service doesn't exist

    Why is it so tediously hard to find what/where to click to get to my email sub-accounts?  You brag that we can have multiple accounts but you overlook making it simple to find their location on your site!!
    And your customer service is by far the worst I've experienced between Direct TV, Dish and Verizon Fios.  Dish was the best. 
    Verizon has gotten so huge as to resemble the old AT&T, and some services are being ignored.  So the cure is to chop you up. 

    #1 Go to http://www.verizon.net/central/appmanager/portal/vzcentral
    #2 Log-in as need be, as the primay account holder.
    #3 Go to My Account.
    #4 Near the bottom, you can create / delete Or enable/disable certain feature of a sub account.
    #5 Log-out, as the primay account ownwer
    #6 Go to e-mail. Now you can log-in your sub account, if your sub e-mail account is enabled.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Same old problems back

    very helpful mods from here fixed my broadband speed a few months ago and untill today its been ok slower than all my neighbours who pay less than me but ok, this morning broadband was intermitant then when it came back speeds slowed to as little as 0.85mps cureently it is 1.41mps, mods advised me to reset the hub if it fell below 2mps which ive done but hasnt made any difference any ideas guys???

    Hi Welcome to the community forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    if using a hub 4 locate these lines located in the hub logs
    Lines should look like this
    19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
    19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Same old problem Norton Toolbar Extension does not work with the latest Firefox 5 .

    When will norton have a update.

    That Site Advisor add-on duplicates features that are built into Firefox. <br />
    http://www.mozilla.com/en-US/firefox/phishing-protection/
    That said the Site Advisor 3.3.1 is blocklisted by Mozilla due to the Site Advisor extension being the #2 cause of crashing the Firefox 5.0 betas. McAfee was notified of the problem long before that extension was added to the blocklist. Now it is up to them to fix it. <br /> https://addons.mozilla.org/en-US/firefox/blocked/
    I have heard that SiteAdvisor 3.4 is now available, which should fix all FireFox 5.0 issues. It is available from siteadvisor.com . Not sure why McAfee isn't doing an automatic update for their users.

Maybe you are looking for