Same operating concern for multiple controlling area

Dear all,
We have a senario in which multiple controlling area is defined with multiple currency. Is it feasible to use same operating concern or different.
Thanks & Regards,
Vishal

Hi
As long as the Fiscal Yr Variant is same between the two, you can use same Op Concern
I dont think the above reply is valid because in my opinion, there is no restriction with regards to Currency
br, Ajay M

Similar Messages

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

Same Cost Element in multiple Controlling Areas

Can a same Cost Element under the Chart Of Accounts(CSKA) used in multiple controlling areas under the Chart Of Accounts or it should be used only by one Controlling Area. Then as Cost Element category is under CSKB (Cost elements (data dependent on controlling area)) it depends on Cost element and controlling area. So can a Cost elemtnt in different controlling areas has different cost element category. Is that possible as in that case COst ELement becomes GL Account in one Controlling area and doesnt have GL Acvcount in another.

Yes. Provided it's the same chart of accounts being used across all of the controlling areas. In the case of primary cost elements, you will still need to individually create the equivalent G/L accounts in every applicable company though.

Prcessing KEU5 transaction for multilple controlling areas in parallel

Hi,
I have executed KUE5 transaction with an assessment cycle for a controlling area and when i try to execute the same transaction with an assessment cycle for another controlling area in parallel, there is an error message 'Cycle YOCETEST2 01.02.2008 cannot be started because run group 0000 is locked'.
Please provide me a solution to execute the assessment cycles for multiple controlling areas in parallel.
Regards,
Satish.

Hello,
Are you able to solve this? I am getting this error sometimes when the transaction KSV5 fails.
Please let me know.
Thanks,
Rushi

Multiple controlling area with same chart account

Hi Experts,
can we consolidate multiple controlling area with same chart account in SAP BI?
for example, if in R3 I have 4 Controlling Areas with the same chart of accounts, I can get an standard BW reports summarizing them.

Hi
Chart of accounts i.e. 0CHRT_ACCTS is an attribute of Controlling area. This means each Controlling area will have it's own chart of accounts. This chart of accounts could be similar in terms of content values. So it is possible to consolidate and produce a report which provides a summary of the chart of accounts.
Cheers
Umesh

Difference between operating concern, segment and business area

hi,
can any one tell me the diffrence between operating concern, segment and business area with example.
regards,
ankur

Hi,
Operating concern is the highest level of hierarchy in controlling area. Operating concern used to
do analysis on PCA (Profit Center Acctg) / CO-PA. This is basically used for the analysis of parameters, like measuring
internal profit of a SBU, Sales data analysis (COPA).They can even be used for Analysing balance sheet items
(Stocks,Assets,cash etc.)
Segment- financial report information by line of business and geographical area
business area- equivalent to a specific area of responsibility within your company or business segment. This can be used for both internal and external reporting
                      Business areas are primarily used to facilitate external segment reporting across company
codes, covering the company's main areas of operation (product lines, branches)
      organizational units in FI module are ( in sequence): Client, company code, business area, company, credit cotrol area, funds
      management area, dunning area, chart of accounts and controlling area.
Thanks,
Rod

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Multiple Controlling Areas

I have a client with multiple controlling areas in ECC 4.6c. We are preparing them to upgrade to ECC 6.0 then migrate to the new G/L. The questions is: When is it "easier" to convert to a single controlling area, before or after the ECC 6.0 Upgrade? Before or as part of the New G/L Migration?
They may not upgrade until very late this year or early next year. They want to improve consolidated reporting as quickly as possible but are wary of the amount of time needed to eliminate the multiple controlling areas.

Have you thought about re-implementing???
Migrating Company Codes from different controlling areas can be a complicated process. You may need to create new Company Codes and link them all to the new controlling area.
This will be a massive job - even if you dont want history.
Think of the master data - Customers, Vendors, Assets, Materials etc.
If you are to do anything you should get your rg Structure defined - i.e. one Controlling Area and then go for the new gl document splitting program.
The two pieces of work are Fiscal Year dependant, the next FY you would need to move to a single Controlling Area, and then the following move to document splitting.
You could do the Controlling Area and Upgrade (re-implementation) in one project and then do the document splitting the next Fiscal Year.
Either way - good luck, sounds like you are going to be very busy !!!

1 Operating Concern for Account Based and Cost Based COPA

Hi,
We are using Operating Concern 3000 for Account Based and Cost based Profitability Analysis. However when i try to extract data from the account based Operating concern it gives me an error in extraction : error 09.
Could it be that we cannot use one operating concern for both types or COPA?
Thanks

Hi
Have you deactivated any of the characteristics used in Account based COPA
Check KEQ3 and you may have activated only for Costing based COPA
S Jayaram
Edited by: S Jayram on Dec 18, 2007 3:24 PM

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Can I use the same email address for multiple seats in Creative Cloud for Teams?

Can I use the same email address for multiple seats in Creative Cloud for Teams?

No. http://www.adobe.com/products/creativecloud/faq.html
Can I buy more than one membership to an individual offering of Creative Cloud?
No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

USING MULTIPLE CONTROLLING AREA in the column

Dear Experts,
As per my requirement i need fetch the data from multiple controlling areas in to one report. please let us know how many ways are there? can i able to use controlling are in the column of the report. when i try to select the controlling area is not appearing in the coumn and it is appearing only in the gene

Hi,
You can select multiple Controlling area Please try with following steps.
Maintain variant
Click on attributes.
Environment > Maint.sel.varables.
Click on Display/Change.
Create new Parameter.
Maintain selection options to new parameter.
Save and back.
Select "T" in selection variable against Field name :Controlling Area.
Select the selection variable(Newly created Parameter)
Regards
Mahesh

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

Single Cheque for Multiple Business Area

Hi Experts
How can I print one cheque for multiple business area with the option of printing different cheques still remaining?
Thanks
Nadia

Hi Nadia.....If Iam not mistaken you DONOT want to make Separate Payments for each Business Area.
In such a case donot select the checkbox Separate Payments for Business Area -FBZP--Paying Company code customisation.
If this indicator is set, line items from different business areas are paid separately.
Hope Iam clear about this.
Please assign points if helpful
Regards
Aravind

Same operating concern for multiple controlling area

Similar Messages

Maybe you are looking for