Same output file in multiple directories.

Hi,
I am working on a Proxy to File scenario where a target csv file is generated by PI. The requirement is that PI needs to generate a csv file and post that file in 4 separate directories of a same FTP server.
I intend to do that using single comm channel in PI to avoid point to point approach.
What's the expert opinion here?
Cheers
Rasif

Hi,
As suggested by Amit, you have to use OS Command line feature.
Please see the below thread, it mgiht be useful to you.
Re: Genrate file in 2 different locations

Similar Messages

Save file in multiple directories using receiver file adapter?

Hi,
Is it posible to save file in multiple directories using receiver file adapter?
Regards,
Ashish

Well, there is a round about way to do that -
The idea is to use multi mapping. 1:n mapping
1) Map ur message to 2 different record set nodes. Since you want to use the same file both the mapping will look exactly the same. make sure that the filepath and filename are a part of the output payload message
2) In the file adapter config. make sure the the file name and file path are from these payload fields. You can use a context object to refer these fields. Voila...the files are created in the 2 direcoties you mentioned.
of course the simplest way is to route the same message to 2 business systems/services and write them out using 2 ccs.,
Arvind R

How to write file into multiple directories by using file adapter?

i need to write my file into multiple directories,i able to do in single directory.But i need to write to muliple directories.Please help me out.Thanks in advance.

If you are passing the values at runtime then you can loop it and and invoke the file adapter in loop by dynamically passing the value in invoke properties for "File Directory and File name" etc.

How to pickup files from multiple directories

Hi all,
How to pickup files from multiple directories and send it to two different folders at target
Ex:
files\xi\us\US.txt
files\xi\uk\UK.txt
i need to pick up the above mentioned two files and send it to the following paths
app1\files\us\download\US.txt
app1\files\uk\download\UK.txt
US.txt has to goto US folder and UK.txt has to goto UK folder only
Regards

Hi,
To pick form multiple folders, select Advanced Mode for file selection in file adapter..
there u can specify directory name/file names
Refer
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
To put those files at multiple folders write a command line arguments for this.. go through this weblog...
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
XI/PI: Command line sample functions
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Hope this will help you....
Regds,
Pinangshuk.

FILES FROM MULTIPLE DIRECTORIES

Hi Experts,
                I got a doubt here plz clarify it
    1.How can we pick files from multiple directories ? and all the files will have different names?
                Plz clarify this, good explanations willbe rewarded .
                                                                                Regards,
                                                                                Vinod.

Hi Vinod Reddy,
One way that i know to solve this prob is by using the 'File Name Masking'.
This can be done with the sender channel, where you have to specify the
source directory as <NOTHING>
source file as <NOTHING>
This gives you an advanced selection option, where you need to give the Source Directories along with the File name masks (the source files).
Hope this may solve your problem.
regards
vinod v
reward me if its helpful.

File Adapter: picking files from multiple directories

Hi all,
In a sender file communication channel with Transport
Protocol FTP, There are 2 parameters for Picking up the file
called Source Directory and Filename. If I want to pick the
files from 2 or more directories, What needs to be done.
Or is it possible to do so ?
Without making duplicate interfaces what else can be done ?
Regards,
Vijay

Actually it is possible to select files from different folders for sender channel. It is available with SP14.
I just copy following description from help.sap.com
Advanced Selection for Source File
If you want to set an exclusion mask for the File Name specified above, or if you want to specify multiple directories using a file name mask and exclusion mask, set the Advanced Selection for Source File indicator.
¡ Specify an Exclusion Mask for the file name specified above.
Example
You want to process all files that have the extension '.txt', but want to exclude all files that begin with the letter 'a'. To do this, enter .txt for File Name, and a for Exclusion Mask.
¡ You can enter additional specifications for source directories, file names, and exclusion masks in the table. This data is processed in addition to the details specified above.

Multiple source files from multiple directories in sender CC

Dear all,
My requirrement is that ,I need to use multiple directories in sender CC (only one) and send the files to receivers.
Kindly let me know how it can be done.
Thanks,
Srinivasa

Hi,
under advanced tab.............If you set the Enable indicator, you can enter variables for the Target Directory and File Name Scheme. Enter the names of the variables and references in the table.
●      Enter each variable that you reference in the Target Directory and File Name Scheme fields without the surrounding percentage sign under Name of Variables in the table.
The variables can refer to attributes of the message header or elements of the message payload.
○       If the variables are to refer to an attribute of the message header, add the prefix message: to the name of the variable under Reference. You can specify the following attributes of the message header:
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if you want to specify the interface name from the message header in the target directory or in the file name scheme, enter message:interface_name as the reference.
If one of the message attributes contains characters that are not permitted in a file name, for example \, /, :, *, ?, ", <, >, |, then these characters are replaced by an underscore ("_").
○       If the variable refers to an element in XML schema, add the prefix payload: to the information under Reference. The reference then comprises a pseudo path description in the form of a comma-separated list with the schema namea,na,nameb,nb,....
namea,nameb,...corresponds to the element name and na,nb,... corresponds to the occurrence of the element name at the respective level in the document.
The description begins at the root of the document and ends at the respective element.
To reference the element that is in bold in the example, the following expression is used: payload:root,1,e1,1,e2,2
The parser searches for the first occurrence of the root element at the first level. It then searches for the first occurrence of e1 at the second level and for the second occurrence of e2 at the third level. The content of the last element (“Example Value”) is set as the value for a specified variable.
Thanks,
Madhu

Picking up files from multiple directories

Hi All
We have scenario where each sore has its one folder with all the files in the folder, now there is about 200 stores so and about 30 interfaces that picks up files from those directories. It's gonna take some time to add al the directories to all 30 interfaces. Is there an easier way to do this?
Regards

>
stephan claassen wrote:
> Hi
>
> Thx for reply
>
> abhishek salvi what do mean by ServerName/*? we only have the IP.
> If I put in /SAPXI/METSAPXI/* it sais: A file or directory in the path name does not exist
>
> Regards
Suppose you have one File Server installed (say SAP).....it has only two sub-folders (say XI and PI)....now you want to pick files from both the sub-folders....so you can try SAP/* ........
Please open your File Server location and any sub-folder within it and check if it is / or \ .....and then use the slash (/ or \) accordingly ......if you have IP and no name then give the IP.....rest logic remains the same....
Regards,
Abhishek.

Urgent: How to break pdf output file in multiple pdf files without bursting

Hi all,
I am developing a rtf template which will take a xml file which contains data for many employees. Now the requirement is to create a individual pdf file for each user. I know that it can be done through Oracle bi publisher's interface through bursting but we don't have that option. We have to do it at template level.
Right now my template produces report for multiple employees on a new page.
<?for-each-group@section:row;./USERS_SYS_ID?><?split-by-page-break:?>
<?end for-each-group?>
Is there any method like <?split-by-file-break:?> by which each employee report can be started in a new output file.
Thanks and Regards,

Thanks, George!
I will try your suggestion.
While waiting for a response, I ran into another problem:
Some of the PDF documents I am to work from are "protected," meaning I can read them but not extract any pages or click to add them to a list of files to import...but I need to extract some or all pages from it. Any suggestions on this?
Thanks!

Using The Same Audio Files On Multiple Platforms

When I import new audio into logic - often it will say that is creating wave forms for the display.
Q: I notice that the audio files on disk do not show an altered modified date - so where are these wave form displays being saved - on the audio file or inside the logic song?
Q: I am interested in possibly going back and forth between logic and Pro tools LE - and at different times using the same audio files for both platforms. Assuming I am not doing any destructive editing - is it OK to use the same set of files for both platforms - or do I need to make duplicates (I'd rather not)? Also, how does this wave form display get dealt with by going back and forth between the two platforms?

A: the waveform overlays are stored in separate,
temporary files - *.ovm files or something, but my
memory is fuzzy on that for now. The original audio
files are not modified in any way.
Hmmm... I've wondererd about this, too, and as best I can tell, Logic DOES modify the original files.
I just imported some stereo interleaved AIF files into a project (with "copy external audio files to project folder" disabled), and I couldn't see any evidence of waveform creation--a disk search by date revealed nothing looking like waveform overviews, and there were no modifications to the AIF file dates.
So... the next time I imported some AIF files, I checked the file sizes before the import...
Sure enough, the files got bigger by about 100K after being imported into a Logic session, even though the file's timestamps were not changed.
Looks like maybe Logic does write the waveforms into the files themselves ?
On a related note, the manual suggests that it's possible to change the "copy external audio files to project folder" setting after creating a project, but I haven't found this anywhere other than File->New... anyone know ?
Thanks!
James
[email protected]
Dual 1.25 G4 Mac OS X (10.4.8)

Batch Script to display last modified file from multiple directories

Hello,
I am trying to find the name of the latest file or the last modified file from a set of given directories.
I approached the problem by breaking it into two parts: a. read all the directories from a .txt file and display the names of those directories and files under those directories. b. Find the latest file present in any given directory and
Upto this point all worked well, but when I am trying to combine both these batch scripts, I am unable to get the desired result.
I am using BATCH SCRIPT only to complete this.
My tried script is as below:
a. TO SEE ALL THE DIRECTORIES SPECIFIED IN "path_123.txt" FILE
for /f "delims=" %%i in ('type "C:\Users\sonkar\Desktop\path_123.txt" ') do (set locall=%%i
echo %locall%
echo %%i
b. TO FIND THE LATEST FILE PRESENT IN THE DIRECTORY
set BUILDDROP="E:\"
for /f "tokens=*" %%a in ('dir /A:-D /B /O:-D %BUILDDROP%') do set NEWEST=%%a&& goto :next
:next
echo %NEWEST%
But when combining both is not working at all.
Any help is appreciated.

Since batch files lack the ability to do date arithmetic you are pushing them well beyond their limits. Either VBScript of PowerShell could handle this type of task. Here is a VBScript solution. You must save the code in a .vbs file, then modify it to suit
your exact needs.
'Find the most recent file in a collection of folders
'11 Sep 2014 FNL
Dim dDate, dDate_, sFile, sFile_
Set oFSO = CreateObject("Scripting.Filesystemobject")
Set oList = ofso.OpenTextFile("C:\Users\sonkar\Desktop\path_123.txt", 1)
aList = Split(olist.ReadAll, vbCrLf)
oList.close
dDate = cdate("01/01/2000")
For Each sFolder In aList
   dDate_ = cdate("01/01/2000")
   ProcessFolder(sFolder)
   If dDate_ > dDate Then
       dDate = dDate_
       sFile = sFile_
   End If
Next
WScript.Echo "Most recent file: """ & sFile & """"
WScript.Echo "File date: " &dDate
Sub ProcessFolder(sFldr)
   If LTrim(sFldr) = "" Then Exit Sub
   WScript.Echo "Processing """ & sFldr & """"
   For Each oFile In oFSO.GetFolder(sFldr).Files
       If oFile.DateLastModified > dDate_ Then
           dDate_ = oFile.DateLastModified
           sFile_ = oFile.Path
       End if
   Next
   For Each oFolder In oFSO.GetFolder(sFldr).SubFolders
       ProcessFolder(oFolder.path)
   Next
End sub

Read files from multiple directories

Hy to all! I have a little problem with reading files from a hierarchy of directories,something like this: directory A contains: 4 filed and directory B, and also B contains 3 files and 2 directories and so on. i want to make a method that reads all the files from directory A (including all files from subdirectory). I know i have to use recursive programming, i need a method that will be use to do this. Can U help me to do this????? Thank you all.

Can U help me to do this?Sure. First, review basic File IO in Java: [http://java.sun.com/docs/books/tutorial/essential/io/file.html]
Second, have a look at the numerous examples available on the Internet: [http://www.google.com/search?q=java+traverse+directory]
Third, let us know if you run into any specific problems.
Good luck!

How to pick files from multiple directories via Sender File Adapter?

Hi guys,
I have a scenario File to IDOC. The Sender File Adapter has to take all files: .xml from Source directory E://Current/.
Actually directories are like
E:/Plant1/Current/
E:/Plant1/History/
E:/Plant2/Current/
E:/Plant2/History/.
Can I have one Sender File Adapter to pick all *.xml files
from
E:/Plant1/Current/ and
E:/Plant2/Current/ and how can I write it in Source Directory of Communication Channel?
Or do I have to have a Sender File Adapter for each Plant?
Any suggestion please?
Kind regards,
Danijela Zivanovic

Hey
You might wanna have a look at "Additional selection for source file" parameter in sender file adapter.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/singleSenderFileCC4MultipleDirectories
XI/PI: how to exclude files in a sender File adapter?
Even though this method works but there are some constraints,please check help.sap.com for constraints.
Thanx
Aamir

[SOLVED]Copying multiple files from multiple directories to one folder

Title says it all. I have a discography folder with subfolders of the different years and albums of a band each containing music, some also have more sub folders. What I want to do is copy all of the music (.mp3's) from all the folders and sub folders into just one music folder. I found a find and -exec cp command before but it did absolutely nothing for whatever reason. Perhaps I did it wrong. Can anyone help me?
Thanks
Last edited by SiegeMachine (2009-11-15 06:54:40)

. refers to the directory to search (the current directory), it's not a pattern - here's what you want:
find . -iname '*.mp3' -type f -exec cp {} target_dir/ \;
This is assuming you're in the music directory - if not, you want
find /path/to/music -iname '*.mp3' -type f -exec cp {} target_dir/ \;
Last edited by Pox (2009-11-15 06:53:59)

Archiving the file in to Multiple Directories

Hi,
   I have a scenario which takes the file from the source system and uses proxy to post the data in to ECC.When it picks the file it has to pick from multiple directories.This i can achieve by using advanced selection for source files and
also i need to archive these files to multiple directories depending on the source directory. I have given an example below.
      ex : Source directory : /users/system/location1/input
             Archive Directory : /users/system/location2/archive
            The file can also be picked up from
             Source Directory :/users/system/location2/input
             Archive Directory : /users/system/location2/archive
So i have to read the data from multiple directories and archive the same to multiple directories(Depending on the source).Can we achieve this using single file adapter(Communication channel)
   Please help me to resolve this issue.
Thanks in advance
Sripathi G Yogesh

Hi Sripathi,
no, you need for each folder an adapter resp a Communication Channel and, as well, a Sender Agreement for that Channel. But you can copy a well working channel and just change the path to the folder and to the archive. You can reuse the interfaces and the receiver determination as well. I dont see any need for BPM in that case.
Regards,
Udo

Same output file in multiple directories.

Similar Messages

Maybe you are looking for