Same output type gets generated twice when we create PO
Hi,
I have a problem. When I create PO the same output type ZEA gets generated twice. It should come only once. What could be the problem?
Please give me some pointers.
Regards
Purva
Hi
goto the PO in ME22N
goto Messages
select the Output type and check the settings in Communication Method and Further data about the messages etc and other print parameters
Regards
Anji
Similar Messages
-
Same output type getting triggered twice upon saving the document
Dear SDNers,
I have a shipment Document.
Upon saving it the same Output type gets generated twice. ( in a gap of 1 second)
Clarification needed:
1. Please guide as to where i need to look for the error as to why same output is getting triggered twice simultaneously( gap of 1 second).
2. i have checked in the processing routine associated with it. Is it the right place?
P.S. I had posted another similar thread. Closed it since i felt it lacked clarity.
Regards,
SuryaD.Hi,
Fetch the data from Nast table for that document number
Check the vstat . if it is 0 then use the below function module.
CALL FUNCTION 'RV_MESSAGE_SET_PROCESS_STATE'.
Then it will update the existing single record for the first time .
Next time on wards you will get the multiple records for te document in the Nast table.
For that you need to change the VSTAT status as per the requirement.
Hope this might solve your problem.
With Regards,
Sumodh.P -
Invoice output type getting triggered after setting SY-SUBRC = 4 in routine
Dear Friends,
When ever invoice document is generated, if the invoice document is completed and if its accounting document is generated successfully, we need to trigger an output type for invoice ZRD0
For this purpose, we have created a routine 902 in our system. If the required condition, mentioned above, fails then SY-SUBRC set as 4 else set as 0 to trigger the output type.
Currently we are facing a problem, even after setting SY-SUBRC as 4 in routine 902, output type ZRD0 getting triggered.
Please help me to fix this bug.
Thanks a lot.
Best regards,
Amol Chaudhari.Hello Aditya,
I have maintained same code in both routines 'kobed_902' and 'kobev_902'.
Required code maintained in the routine,
sy-subrc = 4. " Do not trigger output type
* If the posting document is created or Billing document canceled *
* and if invoice document is Completely processed then the output *
* type ZRD0 is Triggered. *
IF komkbv3-uvall CA gc_c. "Invoice document is complete or not
IF komkbv3-rfbsk CA gc_ce. "For VF01 and VF11
sy-subrc = 0.
ENDIF.
ENDIF.
We are getting this problem on production client and not able to generate the scenario on quality.
The output type is actually an EDI output type which is generating an IDOC for the invoice.
Thank you.
Best regards,
Amol Chaudhari. -
Hi,
is it possible to create 2 condition records for the same output type BA00 but i want it to be transmitted to 2 different medium.
eg: 1 - print
6 - EDI
now i am unable to do so. I am defining my output via sales org.
but when i enter 2 records of OR doc type with different medium, i get any error
"The condition is being p rocessed in the current session. A condition record with the same variable key is already being
processed."
thanks
dylHi,
It is not possible to maintain 2 condition records with the same document type with different medium... System says its currently processed, if needed you can change the current record with the medium........
Alternatively yu can simply copy and create a new condition type with ref to BA00 and maintain the different medium...
Reward if helpful...
Regards
Bageerath -
For Times New Roman font in Windows server 2012 R2 (Standard), crystal 9/10 report in pdf format is not getting generated. When we change the font for specific report like Arial, Calibri , Cambria then pdf report getting created.
In Windows 2008 R2, same application worked fine to generate pdf report for TimesNewRoman font and there is no change done in the application which is being used in Windows 2012 R2 server.Ok, thanks for the reply. You need to contact support or a forum for the Crystal software. Third party products don't usually include Adobe technology, they have their own software. When you contact them, you may want to expand "unable to generate" to give any specific symptoms including any error messages.
-
Output type not generated after PO save.
HI,
While creating new PO, we are able to see the output type(ABC) before saving the PO. But after saving it, there isn't any output type (ABC) generated.
I have maintained MN04 & WE20. Kindly advice.
Best Regards,
Kapil.1) Have you checked the T code WE21 (Ports in IDoc processing)
is your IDoc port exist in WE21. the same port which you have assigned in WE20 (Partner type LI)
2)in WE20, for Partner (Vendor )- check the partner status as "A"- active in classification tab
Hope you have maintained "message type" in outbound parameters. where we assign the IDoc Port
Thanks -
Two print programs using the same output type in t-code v/40
Hi,
I am trying to use the same Output type RD00 to print diferent forms.
In t-code v/40 we can fill a second Processing but how this work?
Can someone tell me more about this?
The final goal is to print diferent forms according to different companies.
Thank you and best regards
João FernandesHi,
It is not possible to have 2 different routines to be assigned to one output type in the procedure. I think when you say 2 routines, you are saying 2 logics or you are saying the subroutines KOBED and KOBEV of the routine.
In all reqmt routines, which is in discussion now, only one of the subroutines will be always called, though I dont know unfortunately which one is this. As you said, that only one of your processing logic works, that is the right subroutine area where the second logic should also be coded. So please move your code from the inactive subroutine area to the active subroutine area. Now you should be able to see both the validations being active.
Hope this helps. If the case is different, please let us know. -
Two printers need to be setup for same output type
Dear Experts
How do we create condition records for two different printers in VV61 with same output type and packing material type?
Thanks in advance for your answers.
Regards
Bala3)
The configuration helps to redetermine the printer.
F1 help for the field:
"Description of print profile
By specifying a print profile, the printers for output processing are redetermined. You can, for example, assign the printers of a specific packing station to a print profile.
Using the parameter "PPT", you can individually define the print profile in the user parameters."
Please note that you also have to maintain the profile for each user.
2)
You have to make yourself familiar with SAP's condition technique.
http://wiki.scn.sap.com/wiki/display/ERPLO/output+determination+using+condition+technique
(You will need a condition table in which one key field is the plant and assign it to the output type through an access sequence) -
Help required: Two smartforms for same output type?
Dear All,
I have a requirement to display bill of lading for a shipment.
The shipment usually contains two kinds of materials.
The data to be displayed for the first set of materials data is different from what is
displayed for the second set/kind of materials. The layout(columns and structure) is entirely
different. But the user wants to see the two sets of data in two pages, (for the same output type).
But, from what I know, we can only associate one smartform to an output type.
Any inputs.
Thanks.Hi
V/30, just check your output type, if you click on form and routines there is option assigning multiple programs and forms (i,e, Upto 5).
Have not tried it , you can try and let us know your feedback
Regards
Jitesh -
Invoice Print and Email from same output type
Hi All,
We want to print invoice and send an email to customer. Can this be acheived using same output type??
If yes, plz guide how can we do this..
I check some queries in forums but they had coding etc. Can we do it with config??
Regards,
Satish.I'm not sure why you wouldn't configure two output types. However, you can do this with one output type in a number of ways:
1. Use a speciial function output (transmission medium 8).
This allows you to write ABAP code to anything you want. However, you have to manage print contols on yur own as the special function transmssion medium doesn't allow you to specify these on he condition record.
2. Change the driver program for the print output for the output to send emails.
You would need to handle the email routing on your own because the output records for print are just for printing. -
First tab not getting "TabPanelTabSelected" class when tabs created from dataset
Greetings all. I've got a tabbedpanel widget whose tabs are
created with a spry repeat region. works great, except none of the
tabs get the "TabPanelTabSelected" class on initial load. I tried
setting the defaultPanel in the constructor, but to no avail.
here's the div that creates the tabs:
<div class="statustabs_TabbedPanels SpryHiddenRegion"
id="statustabs" spry:region="dsRequestCounts">
<ul class="statustabs_TabbedPanelsTabGroup"
spry:repeatchildren="dsRequestCounts">
<li
class="statustabs_TabbedPanelTab"
spry:hover="statustabs_TabbedPanelTabHover"
spry:select="statustabs_TabbedPanelTabSelected"
tabindex="{dsRequestCounts::@StatusID}"
onclick="updateRequests({dsRequestCounts::ds_RowID})"
>{dsRequestCounts::@StatusName} (<span
id="statustabcount_{dsRequestCounts::ds_RowID}">{dsRequestCounts::@RequestCount}</span>)< /li>
</ul>
</div>
and here's the constructor, which is done after the tab divs
are created:
<script type="text/javascript">
var statustabs = new Spry.Widget.TabbedPanels("statustabs",
tabHoverClass:"statustabs_TabbedPanelTabHover",
tabSelectedClass:"statustabs_TabbedPanelTabSelected",
tabFocusedClass:"statustabs_TabbedPanelTabFocused",
panelVisibleClass:"statustabs_TabbedPanelContentVisible"
</script>
So, the question is: how can i get that first tab, on load,
to take on the appropriate class so that it's styled appropriately?
thanks so much.
MarcThanks a lot Kin. I now have it working, mostly. I changed
the contentgroup div so that it repeated over the RequestCounts to
create the table. However, when I did that, obviously it drew the
table each time through the loop. So I changed the table's spry:if
to also look at the current status names for equality. only then
does it actually draw the table for the status that's been clicked.
the final version appears below.
Now, I do have two problems though.
1) I can no longer use the spry:loading state. If I have
this: <div spry:state="loading">loading...</div> right
under the "TabbedPanelscontentGroup" div, I get an error that
tpIndex is not defined. So...do you know how i can get this
functionality back?
2) One thing I needed to implement was "persistent" tab on
data refresh. I added a loadInterval on the RequestCounts dataset,
and thus everytime that interval was up the tab went back to the
first one. So in the updateRequests() function, i set a variable
named 'selectedTab' to the clicked rowid. Then, in the
tabObserver.onPostUPdate function, i have the dsRequestCounts
current row being set to that variable.
The only problem with this is that the "requests" dataset
then gets loaded twice when the interval causes the data to reload:
once for the first row, and then once for my 'persisted' row. This
makes sense, but i just don't know how to fix it. i'm pasting the
code into this post...maybe someone can see some way to get around
this?
Basically, the behavior I want is this:
a) on initial page load, load the requestCounts dataset and
use the first row of that dataset to load the requests dataset
(this works)
b) when a user clicks a tab, load the requests dataset with
the rowid of the clicked tab (this works)
c) when the loadInterval causes the RequestCounts dataset to
be refreshed, use the 'selectedTab' variable as the CurrentRow of
the RequestCounts data such that the Requests dataset is loaded
with the correct row and the selected tab is correct
So the only rpoblem i have is with c, and the only problem
there is that essentially what happens is the requests dataset is
loaded twice.
Thanks to any and all for advice getting the "loading" state
working and the refresh behavior correct!
--------------- here's the current code -----------------
<!--- ---><cfset request.cfcore = "/argus/dope/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<HEAD>
<TITLE>Spry widgets Samples One</TITLE>
<link href="/argus/dope/style/style.css" rel="stylesheet"
type="text/css" />
<link href="/argus/dope/style/widgets.css"
rel="stylesheet" type="text/css" />
<SCRIPT
SRC="/argus/spry/includes/xpath.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/includes/SpryData.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/includes/SpryXML.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/widgets/tabbedpanels/SpryTabbedPanels.js"></SCRIPT>
</HEAD>
<body>
<cfoutput>
<script type="text/javascript">
var selectedTab=0;
var loaded = 0;
var statustabs = new Object;
//datasets for the tabbed panel of requests.
dsRequestCounts = new
Spry.Data.XMLDataSet("#request.cfcore#ajax/act/act_RequestCountsXML.cfm?StatusesFromLast= 100&ServerGroupID=14",
"statuses/status",{useCache:false,loadInterval:20000});
dsRequests = new
Spry.Data.XMLDataSet("#request.cfcore#ajax/act/act_RequestsXML.cfm?StatusesFromLast=100&S erverGroupID=14&StatusID={dsRequestCounts::@StatusID}",
"requests/request",{useCache:false});
//for the tabbed panels
tabObserver = new Object;
tabObserver.onPostUpdate = function(notifier,data){
dsRequestCounts.setCurrentRow(selectedTab);
//alert("onpostupdate: " +
dsRequestCounts.getCurrentRowNumber());
statustabs = new Spry.Widget.TabbedPanels("statustabs",
{defaultTab:dsRequestCounts.getCurrentRowNumber(),
tabHoverClass:"statustabs_TabbedPanelTabHover",
tabSelectedClass:"statustabs_TabbedPanelTabSelected",
tabFocusedClass:"statustabs_TabbedPanelTabFocused",
panelVisibleClass:"statustabs_TabbedPanelContentVisible"
Spry.Data.Region.addObserver("statustabs",tabObserver);
function updateRequests(rowid){
dsRequestCounts.setCurrentRow(rowid);
selectedTab=rowid;
//alert("updaterequests: " +
dsRequestCounts.getCurrentRowNumber());
//statustabs.showPanel(rowid);
</script>
</cfoutput>
<!--- tab div --->
<div id="statustabs" class="statustabs_TabbedPanels
SpryHiddenRegion" spry:region="dsRequests dsRequestCounts">
<ul class="statustabs_TabbedPanelsTabGroup">
<li spry:repeat="dsRequestCounts"
class="statustabs_TabbedPanelTab"
tabindex="0"
onclick="updateRequests({dsRequestCounts::ds_RowID})"
>{dsRequestCounts::@StatusName} (<span
id="statustabcount_{dsRequestCounts::ds_RowID}">{dsRequestCounts::@RequestCount}</span>)< /li>
</ul>
<!--- tab content group div --->
<div class="statustabs_TabbedPanelsContentGroup">
<div spry:state="loading">loading...</div>
<div class="statustabs_TabbedPanelContent"
spry:state="ready" spry:repeat="dsRequestCounts">
<table class="requeststable" width="100%"
spry:if="{dsRequests::ds_RowCount}!=0 &&
'{dsRequestCounts::@StatusName}'=='{dsRequests::@StatusName}'">
<tr>
<th
onclick="dsRequests.sort('@RequestID','toggle')">ID</th>
</tr>
<tr spry:repeat="dsRequests"
spry:even="requeststable_even" spry:odd="requeststable_odd">
<td>{dsRequests::@RequestID}</td>
</tr>
</table>
<div spry:if="{dsRequests::ds_RowCount}==0">
Move along...nothing to see here
</div>
</div>
</div>
</div>
</body>
</html> -
Default stock type as quality inspection when i create Stock transport orde
I want default stock type as quality inspection when i create Stock transport order with T-code Me21n.All the settings in he material master are maintained for inspection type 08. (donot wnat to change the stock type manually,it should come as default)Please provide solution.
Hi
This is not QM setting this is Achieved by MM setting in SPRO.
SPRO>MM>purchasing>PO>define screen layout at document level>select UBF(STO) or ME21n>overview>GR/IR control>
select Qulaity inspection--> decheck the Opt Entry click on Display.
This will solve your problem
Regards
Sujit -
Document types show up twice when creating a new blank HTML document.
I followed the below instructions for getting HTML 5 as a document type option on CS4. Although I do have HTML 5 as an option now, my other stock CS4 document type options now show up twice in the menu. Any idea how to fix this?
To add the HTML document type, however, you need to modify the file named MMDocumentTypeDeclarations.xml. Here’s how to do that:
1. Find the configuration folder then navigate to the documenttypes folder. The Configuration folder can be found under the folder where you installed Dreamweaver.
2. Find and make a backup copy of MMDocumentTypeDeclarations.xml (MMDocumentTypeDeclarations.xml.bak)
3. Open MMDocumentTypeDeclarations.xml in your favorite text editor. If anything goes wrong, you can always get back to the default state by replacing your changes with the backup copy.
4. Go to the end of the document and find the </documenttypedeclarations> tag and add the following lines just before the </documenttypedeclarations> tag:
<documenttypedeclaration id="mm_html_5">
<title>
HTML5
</title>
<doctypedecl>
<![CDATA[<!DOCTYPE HTML>]]>
</doctypedecl>
<rootelement>
<![CDATA[<html></html>]]>
</rootelement>
<dtdcontext>html</dtdcontext>
<dtdcontext>html5</dtdcontext>
<dtdcontext>frameset_frame</dtdcontext>
<dtdcontext>xslt</dtdcontext>
</documenttypedeclaration>
5. Save the document
6. Restart Dreamweaver
You should now have an HTML5 document type option when you create a new document.
There was an issue with Dreamweaver CS4 that needed to be fixed in code to fully support HTML5 documents which is why upgrading to CS5 was recommended. In CS4, Dreamweaver’s definition of a well formed HTML document has a meta content type which isn’t required for HTML5 documents so, no matter what we do to CS4, any HTML document created by CS4 will have the following:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
Replace that line with this:
<meta charset=utf-8">
You’ll need to do this every time you create a new HTML5 document.
Once you finish go to Preferences New Document and select HTML5 as default Doc Type...
Thanks to:
What I did was create a snippit of the meta and added it to my snippit's meta folder
Jeff Booher
Dreamweaver Engineering
Thanks for your feedback.Hi,
I have done a test and I can reproduced your issue.
I referred to the blog about Automatically create Word documents which include list fields:
http://blogs.technet.com/b/brenclarke/archive/2009/04/15/automatically-create-word-documents-which-include-list-fields.aspx
When I create a multiple line of text column in a list, I just choose Plain text, Then I solved the issue:
Besides, here is a similar post, you can take a look at:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7ab3a61-6643-4a47-a464-fe46b5db1558/rich-text-field-showing-html-code
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Mailing Invoice through output type - Getting Error "No address exists"
Hi Experts,
I am trying to mail the invoice using out put type. I am using the standard out put type MAIL, Print program RSNASTSO and routine SAPOFFICE_AUFRUF_VX for external send 5 and using SP partner type. I maintained email address in Customer master. When I am assigning output type to send mail its failing and am getting an error as following.
Object 1001101366
Output type: Mail
Processing log for program RSNASTSO routine SAPOFFICE_AUFRUF_VX
Function module SO_NAME_CONVERT with return code
Text 110V31001101366 MAILE0000200290 ID STAM lang
No address exists
Error while copying recipient object
Specify at least one recipient
Message object FOL35000000000004SCR36000000000089 created or sent
And the mail is not triggering. Please help me out to resolve this issue. I am an Abaper, SD consultant is not available for me now.
Thanks and Regards,
hemanthCheck whether Note 960088 - FAQ: Sending SD messages externally, helps you
thanks
G. Lakshmipathi -
Output type is generating for each spilt batch in the delivery
Hi All,
We are using Z output type for COA - EDI processing which uses standard program RSNASTED. I observed that output type is triggered for each individual batch in the delivery . I want to know how can I restrict to trigger output type only for item instead of each barches. Can I get some solution in the output type configuration (NACE) to trigger output type for item level.
Regards,
UdayUdaya,
I got the fix. There was wrong output procedure maintained to the output type.
What was the reason for different output behavior for output type ZXYZ?
1.Output type-ZABC- Triggering for both item and batch
10 - Main Material - 30 EA - ZTAN- contains output determination in V/73
90001 - Batch-001 - 10 EA - ZBAT
90002 - Batch-002 - 20 EA - ZBAT
2.Output type-ZXYZ- Triggering only for Item
10 - Main Material - 30 EA - ZTAN
90001 - Batch-001 - 10 EA - ZBAT
90002 - Batch-002 - 20 EA - ZBAT
Thanks!
Maybe you are looking for
-
Word wrapping with JTextPane and styleDocument
Hello, Can someone help me with the following problem. I have a JTextPane where i add a styledDocument. If i fill this with text it doen't word-warp the text! import javax.swing.JTextPane; import javax.swing.text.BadLocationException; import javax.sw
-
After a month of inactivity, pacman says there is nothing to update
Hi all, I have a computer that I am using for a project here at university which has Arch x86 installed. Because I myself run Arch on my laptop, I have not needed to use this other computer for a while (I have been writing code that will eventually
-
Hello! I use iPhone 5s since febrary 2014. Since I've updated to IOS 8 at september I'm having problems with orientation in all my applications. In Camera app screen is rotated 180*, and then, when I trying to view recent photos, they are rotated, so
-
My Thunderbolt will not read my SD card!
I have not done anything unusual to my phone, but the other day my phone refused to read my SD card and will not allow me to take pictures or access the ones I have, I did not drop it, i have tried taking it out and re-inserting it several times. Rea
-
Guide Oracle Reports Developer 10g: Build Reports
Hello ... I'm doing the guide Oracle Reports Developer 10g: Build Reports and practices begin cuando not find files like ("p2q2.jsp, p2q3.rdf, p2q4.jsp, p2q5.jsp, p2q6.rdf, p2q7.rdf") Can someone help me and tell me where I can find them ... Sorry fo