Same parameter multiple times

Hi,
I'd like to call a transaction from URL and fill one parameter several times. I searched a lot but found nothing.
Here we can see how to fill one parameter just one time.
Populating input fields on Webgui for R/3 transactions
So I tried something similar like:
http://<hostname>:8000/sap/bc/gui/sap/its/webgui/!?sap-client=000&language=EN&transaction=ZC95_DISPLAY%20SO_VBELN-LOW=111111;SO_VBELN-LOW=222222
but the second parameter overwrites the first.
any ideas?
Regards,
Joaquin

Hello Joaquin,
I don't understand why this would ever be a possibility.  If on one screen you have multiple input fields that are all for the same parameter name then how is the user to know which field will take precedence?  Are you actually trying to fill a table?  That would make more sense, in which case each value will have a different parameter name.
Edgar

Similar Messages

  • Same parameter multiple times in Execute SQL Task

    Hi all,
    i have a fairly long parametrized query that needs to be run within an Execute SQL task. It has only 2 unique parameters, but these need to be used multiple within that query. The connection is OLEDB.
    ill simplify my requirement by making up an arbitrary T-SQL "where" clause that will illustrate what i need:
    where
    x = @param1
    and y = @param1
    and z > @param2
    and w > @param2
    moving this into an SSIS execute SQL task will require the following:
    where
    x = ?
    and y = ?
    and z > ?
    and w > ?
    I know i need to specify 4 parameters and remap the same variables multiple times.. like so:
    User:aram1   -> 0
    User:aram1   -> 1
    User:aram2   -> 2
    User:aram2   -> 3
    isnt there a better way? i ask this because in my real task i have 2 params, each is reused 4 and 5 times respectively and it seems stupid to repeat params like this.

    @ _proffy_
    you can pass the same variable or value as parameter multiple times sql task.
    follow the steps below.
    1) type the sql query with parameters in SQL statement tab of sql task editor
    2. in the parameter mapping, select the variables.
      you can select the same variables more than once.
     give the parameter name as 0,1,2,3..... based on variables you require.
    do not forget to chooose the appropriate Datatype.
    ex:
    select * from table1
    where a= ?
    and b=?
    and c= ?
    parameters:
    Var name               param Name
    user::Var1               0   
    user::Var1               1
    user::Var2               2
    so the value becomes a=var1, b= var1 and c= var2

  • Why is Apple TV showing the same computer multiple times for Home Sharing?

    Why is my Apple TV showing the same computer multiple times for Home Sharing? Also have connectivity issues. Sometimes will lose signal.
    JonRod's music
    JonRod's music
    JonRod's music
    JonRod's music
    JonRod's music
    I recently updated to Yosemite and never had this issue before.

    I'm not 100% sure of the ins and outs, but it's some sort of known issue between Yosemite, Airport and wifi. All you can do is wait for a fix and keep restarting your equipment as and when needed, unless you have the ability to connect your Mac via ethernet.

  • Can I gift the same app multiple times to multiple users?

    Can I gift the same app multiple times to multiple users?
    Like, if I wanted to buy iMovie for 3 friends, could I buy the app as a gift 3 times?

    You should be able to gift it multiple times
    Gifting content : http://support.apple.com/kb/HT2736

  • Is it possible to copy the same database multiple times simultaneously?

    This is the setup of my environment.
    I have a 'master' database that contains the full schema plus some pre-populated data such as default settings. When database schema changes are made, they get made to the master database. When a new customer signs up for the service, I make a copy of this
    master database (using SMO) that will now be the database containing all of the customer's information. The database is rather large, and the copy operation can take a couple minutes.
    Everything works fine as expected, unless I try to provision two new customers at the same time. It appears that Azure only allows for one DB copy operation at a time. Is there a way to allow for copying the same database multiple times simultaneously?
    Thanks for you input. I understand that this is likely not the optimal setup, and that there is many better ways of doing this, but I am somewhat heavily invested in the current process and I would like to find out how to make it work if I can.

    BTW, you can do this programatically by using PowerShell (https://msdn.microsoft.com/en-us/library/ee210569.aspx), SqlPackage (http://www.benday.com/2012/12/18/deploy-a-sql-server-database-projects-dacpac-with-sqlpackage-exe/)
    or the SQL Server binaries for .NET (http://www.vijayt.com/Post/Deploying-a-data-tier-application-in-SQL-Azure-programatically)
    Hope this helps.
    Alex

  • TS3276 how do I get Mail to stop downloading the same email multiple times?

    My mail keeps downloading the same email multiple times.  I've had as many as 10 of the same emial.  How do I stop this?

    Me too - did you ever figure it out?
    You can't even delete from the server in mountain lion.... I did it from my old mac, but it didn't work. I keep having 11,000 new emails that can not even be deleted in blocks!!!
    Was it a gmail account? Mine is, and my other 2 are fine...

  • How to automate saving the same image multiple times?

    Hello. I wish to save the same image multiple times in a folder... is there a way to automate this function? I also need the flexibility of determining the starting number in this image sequence. Thanks.

    Good day!
    I would recommend asking for help over at
    Photoshop Scripting
    And going into more detail about what you want to achieve (maybe post a screenshot, diagram, mock-up to illustrate it).
    Regards,
    Pfaffenbichler

  • Address book has same entries multiple times how can I go back to original cesium

    Address book has same entries multiple times how can I go back to original cesium

    After a couple of days, I'm noticing that the repeat(ing) offenders have more than 10 episodes, and seem to keep repeating them every time I sync.
    They only show once in my phone and in the iTunes Podcasts, but through iTunes and looking at what's in my phone is when I see the repeats.
    Even after I've marked a podcast as played, and deleted it from within my phone, as well as telling iTunes to delete the played episodes, it still shows multiples of the played episodes.
    There doesn't seem to be any rhyme or reason to it either. They aren't the newest ones either.

  • Running the same code multiple times with different paramters automatica​lly

    Hi guys,
    I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
    X_Intial, X_Final, X-StepSize
    Y_Intial, Y_Final, Y-StepSize
       Thanks,
    Dushyant

    All you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
    Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
    Attachments:
    Cluster Array.JPG ‏9 KB

  • Provision same resource multiple times

    All,
    I have a scenario to provision same resource multiple times for the same user.
    How to make a resource to allow provisioning multiple times in OIM 11gR2. I am not seeing th option "allow multiple" in resource object in the design console.
    Please help.

    In OIM 11g R2 you can assign same resource multiple time.
    The account which gets assigned first time will be marked as primary and the rest others will be marked as "other"
    HTH

  • Avoid opening same Form Multiple times

    hi
    Can anyone help me , how to put restruction not to open the same form multiple times .
    regds/sanjay

    I'm not suggesting that the following is great idea but..
    You could start a timer and keep updating the row in the table with a timestamp and then have a job which checks if there are rows in the table that have timestamps older than the timer interval.
    I actually think that that is really bad idea.
    I think its more important to ask why this is a requirement? I currently write sytems for police officers and even they can grasp the concept that someone else might be updating the same data at the same time as them and can work multiple sessions. Its hard for them, and sometimes I think they may just be hitting their keyboards with a truncheon, but they do get it.

  • HT1689 Billed for same app multiple times

    We were billed for the same app multiple times, how do I contact apple iTunes to get this fixed?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • Printing the same page multiple times on one sheet

    So last year I wanted to print out minature versions of my card design and I was able to do that by printing out multiple copies of the same thing on one sheet of paper. Of course that was a while ago and now today I can't do the same thing. I remember printing the same page(copy) multiple times either in acrobat or indesign. I see that I have a front and back version for last years card and I'm assuming I must have done it in acrobat. Last year when I looked at the preview there was multiple copies of my page. This year I only see 1 even as I choose the other things. At first I thought it might have been the version I was using on my windows as opposed to the version on my mac. But now I'm on my mac and I still don't see how I did it last year. Please help! I keep reading that this can't be done but I remember doing the same thing last year. It was the 16 copies of the same thing option. I tried it again this time but it doesn't work. I tried printing the 4 copies only 1 copy was printed.(the preview didn't even show all copies like last year) The verson of acrobat is X. version 10.1.4

    What exact version of iPhoto 9 are you using? Version 9.5's solution will be different from the solution for earlier versions of iPhoto 9.
    OT

  • Calling same form multiple times

    Hi, i need to call a single form with different table names as parameters depending on conditions.
    for eg here is the approach
    if flag1_is_set
      call form1 multiple times with table1, table2....... as parameters
    "and i can avoid this
    "  form 1 using table 1
    "  form 1 using table 2
    "  form 1 using table 3
    "  form 1 using table 4
    "  form 1 using table 5
    elseif
      flag2_is_set
        form 1 using table 2
    elseif
      flag3_is_set
       form 1 using table 3.
    but i cannot call forms like this. can someone suggest
    an equivalent implementation on how to do this.
    if i dont implement in the above mentioned approach i have to code the same thing with minor changes multiple times
    thanks.
    your help would be appreciated.
    kranthi.

    You might try passing a field symbol (itab) in the tables.
    And assign the filed symbol with your itab as per the condition.
    Check if the program below gives you any idea.
    REPORT  Z_RAM_DYN_TAB_IN_FORM.
    PARAMETERS : P_TAB1 TYPE C.
    DATA: lt_users2 type standard table of usr02.
    DATA: lt_users1 type standard table of usr01.
    FIELD-SYMBOLS: <fs_itab> type standard table.
    SELECT * into table lt_users1 FROM usr01.
    SELECT * into table lt_users2 FROM usr02.
    IF P_TAB1 eq 'X'.
       ASSIGN lt_users1 to <fs_itab>.
    ELSE.
       ASSIGN lt_users2 to <fs_itab>.
    ENDIF.
    PERFORM test_form TABLES <fs_itab>.
    FORM test_form TABLES x_itab .
    FIELD-SYMBOLS: <fs_wa> type any.
    FIELD-SYMBOLS: <fs_field> type any.
      LOOP AT x_itab ASSIGNING <fs_wa>.
        DO 5 times.     "Write first 5 fields of itabs.
          ASSIGN COMPONENT sy-index OF STRUCTURE <fs_wa> to <fs_field>.
          WRITE :  <fs_field>.
        ENDDO.
        WRITE :/.
      ENDLOOP.
    Thanks,
    Ram
    Message was edited by: Ram Manohar Tiwari

  • Placing the same object multiple times

    Does anyone know how to place an object multiple times in either Illustrator or InDesign?  I have a small graphic that I would like to have repeated (probably hundreds of times) to create a background.  I could place it over and over (and over and over and over), but that would be way too labor intensive.
    Is there a way to put it in like it is a self-replicating background?
    Thanks,
    John

    A Symbol, by definition, is stored only once in the file. A Symbol Instance is just a reference. When an Instance is duplicated, only a reference is duplicated.
    Evidently Transform Effect--albeit "live"--does not do the same. It actually does create multiple duplicates of the original. The duplicates are "linked" to the original so that if the original changes, the effect is reapplied on-the-fly in response--but it is applied (and the copies made) all the same. Copies of a Symbol Instance, however, are in and of themselves nothing but position/scale references to the original. So Transform Effect is replicating just those references.
    I don't really find this surprising. Consider other so-called "live" effects. When you add multiple strokes and fills to a path, you are not just adding position/size references to the path; the added strokes and fills are, in fact, being created--regardless of the fact that they are recreated on-the-fly if you modify the path.
    Same way with Pattern fills. The pattern is actually stepped-and-repeated enough times to fill the clipping path to which it is applied. If you reshape or resize the clipping path, the Pattern Fill gets re-built on-the-fly. But it still gets built all the same.
    Apply a live Drop Shadow Effect. That raster image acutally gets created. Change the object to which it is applied, or change the parameters (like resolution) of the shadow, and the raster gets deleted and a new one gets created on-the-fly. But it still gets created, and exists in the file until and unless it is changed.
    I think of "Expanding" a live effect as nothing more than breaking the "link" between all the extra created stuff (which is there) and the object to which it was applied. I don't think of all that extra stuff as "not existing yet." It exists. It's been drawn. You're just not allowed to manipulate it directly, because it is "linked" to the original so that it will be deleted and re-created if you edit the original. Breaking the link (Expanding) doesn't take long, becaues all that stuff is already created; it's not just a string of concise commands waiting to be created. It's already there. But make an edit to the original and it does take a long time to re-draw, because all the extra stuff now has to be re-created.
    Do a Transform Effect on a Symbol Instance. Expand the result. You'll see that what you have is a group of Symbol Instances. And Symbol Instances are just references--commands to "put a copy of that here."
    Use a Symbol Instance in some other construct, like for example, a Pattern Fill. Expand the Pattern Fill and you'll not end up with a group of Symbol Instances; you'll end up with a bunch of actual copies of the artwork which the Symbol contains.
    Same with a Scatter Brush. Now, I can understand a Symbol not working with a Pattern Brush or Art Brush because of the enveloping that has to go on. But all a Scatter Brush does is position/scale/rotate copies. So I would expect a Symbol Instance used in a Scatter Brush to create Symbol Instances. But it doesn't. Try it. Draw a red circle. Make it a Symbol. Use the Symbol Instance to define a Scatter Brush. Draw a path and apply the Brush.  Now doubleClick the original Instance still on the page to put it in Isolation Mode. Change its fill to green. Exit Isolation Mode. The circles on the Brush Path do not update.  They are actual copies of artwork, not Symbol Instances. Who knows why? Perhaps it would break other features/behaviors of Scatter Brushes I never use (Wacom tilt?). Or maybe they could have made it work with Symbols, but just didn't. Didn't AI Brushes exist before Symbols? Illustrator's history is full of later features not being well integrated into the pre-existing feature set (ex: LivePaint and Brushes).
    JET

Maybe you are looking for