Same position number in BBP_PD

Hi All,
We are in SRM 7.0, during SC creation process, if an existing line item is copy pasted and clicked on Order.
It gives error message ' Position number available 2 times'
In BBP_PD the same position number is there.
How to overcome this error message.
Rgds,
Madhan

Hi Madham,
The following notes should resolve this issue for you :
1396862: Duplicate Line number generated during Copy of SC.
1396694: Duplicate Line number generated during Copy of SC Items.
1394664: Paste after copy/cut inserts items at lead selection
I hope this helps,
Kind Regards,
Lisa

Similar Messages

2 Shopping Cart items with same item number

Hi experts,
We are facing a problem I never heared before : a shopping cart has been created with total of 51 items in SRM but some of them have the same item number in BBP_PD (2 items nr 16, 17...).
For example, the 2 items nr 16 have a different Guid, only 1 entry in status section (I113 => OK), 2 entries in Partner section (vendor, requester, receiver, ship-to & site => OK), 2 entries in organization section, only 1 entry in item link section, 2 entries in concract section, 2 entries in account assignment section.
Functionnally, these 2 items are not on the same article (even product categories are different).
The problem now is that only one of the 2 items has been transfered to the backend, the other item has status "approved" but no "follow-on document created".
The only thing diffrent from another SC is that this SC has been put on hold before being ordered (status I1009 is inactive).
I didn't found any note on this problem, we are user SRM5.5 SP6 with classical scenario.
I heared about a maximum item number in SC but I think in SRM5 there is no limitation, at least not less than 99 items.
Thanks in advance for your help!
Best regards,
Benjamin

Hi,
please try to process the Held SB ,backend document will be created. since Creation of Shopping cart is in WEB processing of time take more normally .I think you can create a line item of
999 line in SB because in backend SAP R/3 it will allow only 999 line items
G.Ganesh Kumar

How to keep the SAME position of layout on left & right pages when adding a page?

A little background first before I ask the question:
I've been converting a PowerPoint document to the InDesign format, and adding pages as I go through by duplicating a page in order to keep the top description text in the same position at the top left hand side. The document is over 110 pages- more pages will be added soon, and some pages deleted. Basically the presentation will be printed as a book, and the client we are designing this presentation for sent us the master pages for the layout.
The issue I'm now having: I had to delete an odd number of pages which caused a shift of the layout of pages throughout the document after the pages I deleted. I figured that the right hand page was not aligned the same as the right hand page, so I measured in the same distance from the left edge on both pages and made the adjustments. But then when I added a page, the alignment shifted again.
Is this an issue with the master pages? Or is this another issue? Any idea how to fix this so that the pages are aligned the same whether I add or delete a page? I've included two screen grabs to better illustrate what is happening:
I would be very grateful for any help you may be able to offer on this, thank you in advance.
Vera

Those are your margin guides, and your client evidently expects the margins to be larger on the outside of the page than at the spine. Putting the text frame that says Main Building... on the master page will not only save you having to enter it each time, but will let you put it where it should be and have it stay there when pages switch sides. Your images are going to seem to shift, too, unless they are centered on the page on the horizontal axis.
I'm sensing you really have little or no experience using ID, and some basic training would probably help you quite a bit. I'll recommend Sandee Cohen's Visual Quickstart Guide to InDesign -- best book out there for beginners.

Check on Multiple entries in the same positions

Hullo all!
Can anyone pls tell me as to how can i keep a check on multiple entries (i.e.persons) occupying the same position?
i mean that if a position is 100% staffed, then there should be an error popped up when another personnel no. is being assigned to the same position.
And if the position is staffed 60%, then another personnel no. should be accepted on the same position only if the staffing percentage is allotted as 40%.
is this an ABAP development? and if so, what all tables are to be referred etc? what is the logic?

Hi ,
Please download the note from transaction "SNOTE" (Cntrl + F8 / Download SAP Note). I can send you the note if you can share your email id.
An extract from note for your reference :-
Number 502182
Version 0004
Processor
Processing Status new
Implement. Status Cannot be implemented
Language EN
Short Text Holder relationship, staffing percentage, working time
Component PA-OS Organizational Structure
Long Text
Symptom
In Organizational Management, difficulties exist concerning the creation of the staff
assignments. The interaction of holder relationship, staffing percentage working time
of the employee and planned working time of the position is not clear.
Effects on subsequent processes, for example, the integration of Cost Distribution are
not clear.
Other terms
Integration of Cost Distribution, IT1018, IT0027
Reason and Prerequisites
Solution
The following text should explain the interaction of holder relationship, working time
of the employee, planned working time of the position and the integration of Cost
Distribution.
Contents:
1. The holder relationship
2. The staffing percentage
3. The staff assignment from the viewpoint of the position
4. The working time at the position
5. The working time of the employee
6. The relationship characteristics of the holder relationship
7. Dependent processes (Integration of Cost Distribution)
=======================================================================
1. The holder relationship
Relationship between position and position holder (employee), infotype 1001, subtype
A008
Allowed relationships:
(See system table T777E)
A Work center A 008 Holder P
A Work center A 008 Holder US
BP Business partner B 008 Holder S
P Person B 008 Holder A
P Person B 008 Holder S
S Position A 008 Holder BP
S Position A 008 Holder P
S Position A 008 Holder US
US User B 008 Holder A
US User B 008 Holder S
SAP Note Nr. 502182 10/05/2007 Page 1
Time constraint:
(See system table T777Z)
A 1001 Relationships A008 Holder 3
S 1001 Relationships A008 holder 3
P 1001 Relationships B008 holder 3
That means:
<b>o An employee can be assigned to several positions at the same time.
o A position can be assigned to several holders at the same time.</b>
Reward points, if this was helpful.

How can I should the position number in sequence via ppom_old or ppome

Our user creates the position number via ppom_old and get the position number from this screen. The position number has been shown on sequence.   However, something seems collapse. Do you guys know how I can show insequence again?

It is based on Priority (Edit-> Priorirty)
Use
Sequence Priority of Objects
     The Priority field is optional. It is used to determine the sequence in
     which objects are presented in Simple Maintenance and Structural
     Graphics.
When multiple objects are located on the same hierarchical level of a
     structure, these must be ordered in a specific sequence from left to
     right (or from top to bottom).
This is done by assigning alphanumeric priority values, where the value
     1 is the highest (far left or top) and 99 the lowest priority (far right
     or bottom).
If you specify no priority, the system places objects according to their
     object IDs.
Priority When Defining Evaluation Paths
It is only necessary to prioritize evaluation paths as an exception.
     Generally, you should use '*', so that all relationships are read.
Use the Priority field to define evaluation paths if you want only
     objects which are assigned a certain priority (see above) to be
     considered in an evaluation path.
Note
You can find more information on the meaning of the priority field with
     reference to evaluation paths in the online IMG documentation for
     'Maintain evaluation paths'.
Priority for Responsibilities
If you are using responsibilities for role resolution in Workflow, you
     Example: There are various responsibilities for a standard role for
     processing orders, grouped, for example according to order value (one
     responsibility for orders up to a certain value, another for orders with
     a greater order value).
Assuming that orders for a particular customer are always to be
     processed with the same responsibility (and therefore by the same
     agent), you can access it via another responsibility with a higher
     priority that contains the customer name as the only criterion. The
     responsibility (-ies) with lower priority, and therefore the order
     value, is then no longer taken into account during agent determination.
Use only numeric values here, and note that, logically, the
     responsibility with the highest numberic value in this field has the
     highest priority.
Procedure
1. Sequence Priority of Objects
         In Create mode, assign a priority to the objects you wish to rank.
         To do so, assign an alphanumeric value (1, 2, 3... or A, B, C...) to
         each object.
2. Priority When Defining Evaluation Paths
    In the Priority field, enter the priority or priorities for objects
    that should be considered in evaluation paths. Enter "*" if you want
    to have no restriction.
3. Priority for Responsibilities
    Maintain the priority directly in the detail screen for the
    responsibility or in the overview screen for the responsibilities
    for the rule. Note that you must use numeric values here. On the
    overview screen, the system sorts the responsibilities in descending
    order of priority.

With the Position Number can we find other positions in the Org Unit

Hi,
With a particular position number can we find other postion in the same Org. Unit.
The other postion is not a reporting postion of others.
I repeat if I give a postion number which is not a reprting manager position but still I would Like to find the other position in the Org. Unit.
Or which Evaluation path is used for it.
Thanx in Advance.
Regards,
IFF

Hi,
In the present scenario I just know only the postion of the employee,
I just want to know the evaluation path wrt position by which I can find all the positions associated with the same org unit wrt to the known position.
I just want to pass Otype as S positon in the FM RH_STRUCT_GET , and get the all positions associated with Org. unit wrt to known position.Please let me know the evaluation path.
Regards,
IFF

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How do I add multiple tickets under the same confirmation number from the American Airlines app to Passbook?

I have a confirmation number from American Airlines for a flight with my family all under my name and for some reason I cannot add all of our tickets to Passbook. To clarify, I went to the American Airlines app and put in the confirmation number along with my name which pulled up my boarding pass only. Although I was able to add this boarding pass to Passbook, I was not able to add any of the other boarding passes for my children to Passbook that should have also been under the flight reservation. In fact I couldn't even see them in the American Airlines app. I tried to use their names and the same confirmation number but nothing happened, and nothing else seems to be working. How can I add all of these boarding passes to my Passbook?

Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys.

Check same material number is entered in the va02 for bulk_sales_order

hi
i am calling the transaction 'VA02' by passing the bulk_sales_order number which is already created containing the record, after that if i try to create the new item for same material can allow, but if i try to create for different material i need to display error like
'invalid material number enter the same material number'. and before that i need to check sales order type is bluk_sales_order "XLB' used in my project...
thanks with regards
swamy
Moderator Message : Duplicate post locked. Continue with [Need to validate the material number in the VA02|Re: Need to validate the material number in the VA02].
Edited by: Vinod Kumar on May 19, 2011 10:25 AM

VKOA error was there

Spool no. not generating for the same shipement number

Hi,
I am working on shipment related forms. When i give the print of one shipment no., all the forms are going to one spool number. But my problem is when i take the same shipment number from second time onwards then all the forms are getting appended to the same spool number instead of creating a new spool number.
For example my shipment no.:- 1277489 contains 8 pages, when i take the same shipment no. for second time all the 8 pages getting appended and total 16 pages are going to that same spoll no. For third time 24 pages and 4th time 32 pages and so on... in the same spool request.
I have debugged the driver program, but i din't get any solution for that. So can any one suggest me of how to resolve this issue.
Thanks & Regards,
Ramana

Hi,
After selecting the print option, the print pop window appears. In that select the option New Spool Request.
Then give the print, it will come on new page.
You can also pass this option in the print program also. Pass TDNEWID = 'X' in parameter OUTPUT_OPTIONS.
Regards,
Vinod

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Using the same serial number on two devices, for Adobe Creative Suite 6 Master Collection

I already have Adobe Creative Suite 6 Master Collection (student version) installed on my personal home computer, but I'm looking into buying a laptop, will I be able to install the same programs and use the same serial number on my laptop as well as it being on my personal home computer, or would I have to buy separate software for my laptop?

Fininif you can install Creative Suite 6 on up to two computers for your use.

Can i have multiple iphones with the same phone number?

If I upgrade to iPhone6 can I: a) keep my 4s operational with the same phone number; or b) must I get a new number for one of the two?

I don't believe your cellular provider will provision 2 SIM cards with the same number. You can forward calls, if your carrier supports it, from one phone to the other depending on which one you have with you.

Can two people access the same online number at th...

Me and my dad share the same online number for friends and colleagues to call us, but it seems that the calls that come through to me are ad-hoc whilst my dad gets every call on his system. I just wondered if this is because 2 systems are trying to access the same online number?
Thanks

Enter the SN where?

I have Adobe Acrobat 9 Pro on my desktop. Can I also load into onto my laptop for working remotely with the same serial number?

I use Adobe Pro on my desktop daily at the office and now will be handling work remotely from a laptop as well. Adobe Pro is essential for my work (bates stamping, redaction, advanced editing, etc). Can I use the same serial number and installation disc to load this on my laptop? There are no instructions that speak to this issue and I know other programs I have installed provided for both desktop and laptop access. It isn't like I am giving use of this product to another user or pirating it, so I can't foresee an issue. Any information is much appreciated. Thank you!

Hi rebekah,
Adobe End User License Agreement entitles you to install a singe retail license on 2 computers at any instance.
So you can load Acrobat 9 license on the other computer too.
Regards,
Rave

Same position number in BBP_PD

Similar Messages

Maybe you are looking for