Same Private AS number on two seperate MPLS provider networks

To All,
I have a customer utilizing private AS number 65100 when attaching to MPLS Carrier A.
The customer decides at each location he wants to add a second router and a second carrier for redundancy - and also wants to utilize the same private AS number (65100) when attaching to MPLS Carrier B.
The CE's would only be utilizing network statements through eBGP to advertise subnets to each carrier and only run one way redistribution from eBGP to the IGP at each location.
Would there be any circumstance why Carrier B could not accomodate AS 65100 on their network - even if another customer is already utilizing AS 65100 on Carrier B's network?
I am very certain that two seperate customers can utilize the same private AS number on Carrier B's MPLS network. Please advise if I am correct (or not).
Thank You,
Brian

Hello Brian,
your understanding is correct there are no technical reasons that would prevent ISPB to accept the customer to use private AS 65100.
There can be other possible reasons like ISP policies (they may be used to assign a private AS number to customer) and procedures.
Hope to help
Giuseppe

Similar Messages

Same invoice number for two delivery documents

Dear Folks,
We are having the following business flow:
Contract- S.O.- Del- PGI- PI- Excise Invoice- Commercial Invoice
Now The system is generating the same commercial invoice number for two delivery documents.
1.The two deliveries have 40 and 50 MT of materials respectively.
2. The proforma invoices are separate for both and have quantity 40 an 50 MT respectively. Excise Invoice is also diffrent and of right quantity for both of deliveries.
3. In one of the delivery (40 MT) it is showing aditionally "Confirmation of service" in document flow.
4. But while doing commercial invoice the system created a single invoice with quanitity 50 MT ONLY.
5. In the document flow of both deliveries it is showing the same invoice number.
Please advice.
Thanks in advance.
Raghu

Hi Raghu
In standard settings,system always tries to combine the deliveries into one invoice if they have same Payer, Billing data, Destination country,Payment Term and same Incoterm.
This is controlled by the routine "001" in the copy control table "Delivery to Billing" (t.code VTFL).
Possibly, in your case, the above criterias are same and routine is "001" in the copy control table.
If you want separate invoice for each delivery, then in the copy control table (t.code VTFL), go to item level and in the field VBRK/VBRP field put routine "003" and save it.
Now, system will create separate invoice for each delivery even if the above criterias are same.

Ok... So can you have two seperate itunes accounts on the same computer?

My dad is getting an ipod for christmas... and well I don't want him on iTunes draining all of my money. Is there a way that you can have two seperate accounts on one computer?

Yes. If you want separate iTunes accounts, the easiest way is to set up 2 users on the computer, each with their own iTunes library.
If the two phones share the same iTunes account this is not necessary.

If my wife and I have two seperate itunes accounts can we both have home sharing on the same computers at the same time or is it one or the other

If my wife and I have two seperate itunes accounts can we both use home sharing at the same time on different computers to view each others librarys or is it one or the other only

You can share your libraries within the same household:
http://support.apple.com/kb/PH1455?viewlocale=en_US
And here:
http://support.apple.com/kb/PH1453?viewlocale=en_US

How do i sync two different ipads to the same computer, but maintain two seperate list of apps?

How can I sync two seperate ipads to the same computer without the apps from one ipad being loaded on the other?

Do this for each device. You can do this with all iTunes content as well. Apps, music, photos, books, movies - everything. You can have unique content on all of your devices.
You may also want to turn off auto sync so that you do not have to wait for the iPad to sync and then go back and make these changes.
Launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom.... Prevent iPods, iPhones ....
Then set up your sync preferences like this using Apps as the example.
Connect the iPad to the computer and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Apps Tab on the right.
Click on all of the apps that you want to sync to that iPad
Click on the Sync Apps Heading.
Click on Apply in the lower right corner of iTunes
You may want to uncheck Automatically Sync New Apps under the Sync Apps list

Two seperate contacts appear to be the same one in Text Messaging

I have two separate contacts that when I text message them it always lists them as the same contact. So when I look at my list of conversations in the Text messaging app it shows two separate conversations for the same contact, but one of them is falsely labeled and is actually for the 2nd contact.
In other words contact A's conversation and contact B's conversation are both label
I have two seperate contacts that when I text message them it always lists them as the same contact. So when I look at my list of conversations in the Text messageing app it shows tow seperate conversatoins for the same contact, but one of them is falely labeled and is actully for the 2nd contact.
IN other words contact A's conversation and contact B's conversation are both labelled as a conversation with contact A. It's also wierd to look at the list of text messaging conversations and see the same contact listed twice, even though one of them is with contact B.
Has anyone else experienced something like this?
Does anyone have any advice on how to correct this?
ed as a conversation with contact A. It's also weird to look at the list of text messageing conversations and see the same contact listed twice, even though one of them is with contact B.
Has anyone else experienced something like this?
Does anyone have any advice on how to correct this?

Hi Glitch!
I'm sure this is very inconvenient and confusing for you. Lets get to the bottom of this. As I understand, you have two separate conversations, however both are labeled with the same name? Are these names similar or the same listed anywhere else on the device, like Facebook, Twitter, etc? Keep me posted.
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Sale invoice pick same serial number in two time

Dear All,
issue is when i m genrate a sale invoice of particuler trator material t100001 with the serial number AM1005 dated 11-3-2008 .
and after 11-3-2008 again dated 12-3-2008 when i create new sale invoice of particuler trator material number t100001 then system again show me same AM1005 serial number which one i m already used in pervius sale invoice date 11-3-2008
how it can poosible if once a sale invoice genrate with paticuler serial number so why the again genrate sale invoice same serail number
why the sale invoice pick same serial number in two time ?
kindlly tell me how can i resolve this problem ?
regards
Pritpal

Hi
trying giving serial numbers at the time of Delivery.
It will solve your problem
Regards
KRSNA

Updating Feed URL :- Inadvertantly Updated Two Seperate Feeds to Same Feed

There are two seperate feeds in iTunes Music Store for Immaculate Heart of Mary Podcasts.
[1] http://itunes.apple.com/us/podcast/immaculate-heart-mary-homily/id294766875
[2] http://itunes.apple.com/us/podcast/immaculate-heart-mary-homily/id295664714
Originally these feeds were pointing to two different feed URLs. During the process of moving hosting solutions, both of these feeds are now pointing to the same feed:
http://feeds.feedburner.com/ImmaculateHeartOfMaryHomily-cast
One of these should point to the feed mentioned above, while the other one should point to the following feed:
http://feeds.feedburner.com/ImmaculateHeartOfMaryLivingtheliturgy-themass
Can you offer any suggestions on how I might update one of the feeds without updating the other. I have attempted to add the new-feed-url tag and using the ping service. While that worked for my local podcast feed, it did not work for the store.
Any assistance with this would be greatly appreciated.
Thanks

You have painted yourself into a corner, I'm afraid. The 'itunes:new-feed-url' (which you would insert in the feed they are both using) should work perfectly well but will redirect both podcasts to the other feed, which won't get you anywhere.
You have two options, neither of them much fun. You could get one of the podcasts removed from the Store - instructions here - and submit your new feed as an entirely new podcast. You will probably need to make a small change in the title, as a bug in the Store software may tell you that the podcast has already been submitted: and of course you will lose any subscribers or comments. Incidentally the last person to post about having tried this was told to use the 'block' tag - obviously this is no good as it will block both podcasts.
The other option is somewhat uncertain. iTunes Support is notoriously unhelpful, often sending back form answers which often don't deal with the actual problem, or referring the questioner to the Discussions Forum (which may have sent the questioner there in the first place): however it has been known for someone to persuade Support to shift their podcast to a new URL, so it's worth trying. It's probably just a matter of luck who you get. To contact iTunes Support, go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'.

Can I have two seperate iTunes lists for two iPods on the same computer?

I have two nanos, one for me and one for my daughter. Can we manage two seperate download lists when we plug in to the same computer.
The additional complication...her nano has a smaller memory than mine, so her's wouldn't hold all the songs anyway.
Assistance would be appreciated!
Happy holidays
Nordic Squirrel

Have a look at this article in the Apple Knowledge Base.

In MIGO two seperate entry for the same Material in Accounting Document

Dear Expert,
Hi
Business is doing stock transfer transaction. Here with reference to stock transfer PO when business is doing Goods Issue.
here there is two stock transfer PO. in one PO there is two line items for the same material. in the second PO again same material with two line items.
but at the tme of Goods issue it is showing two seperate line for same material stock account credit in accounting document. but in the other Goods issue with reference to second PO it is showing only one line for inventory account credit in the accounting dcoument.
so pl. guide me on this.
thanks
H shah

Hi,
Step 1 : First we create the Stock transfer PO.
Step 2 : Goods issue with ref to above stock transfer PO ( Movement type 351) - MIGO
Step 3 : Goods Receipt with ref to above stock transfer PO ( Movement Type 101 )- MIGO
Thanks
H shah

Two seperate animations running at the same time

Hi
I would like to make a fully automated presentation, with some object moving and the like... I am trying to have two seperate animations running on the same slide. The animations are quite simple - move in, move around, move out. What I would like is that they both act seperately so they start at the same time, but otherwise begins to move at different times and exits at different times. I'm having trouble achieving this as i can only link automatic actions to the last action on the list (i.e. I can't have two trees of actions that start simultaneous)
I hope I have succedes in complicating an otherwise straightforward question with my late-at-night english

You'll have to be more imaginative with the way you structure the builds so you can in fact do it inside one tree. (Not a put down, just it's hard to give more exact answer because the question has few specifics).
Remember you have +*delay options*+ for each build, so two concurrent build/move actions can actually occur at different times in the presentation. Play with the start build and delay controls and you should be apples.

Same pseudo random binary number on two different laptops

I want to generate same pseudo random binary number on two different laptops at the same time.
How can I do that. Please provide suggestions.
JK

Hi Joseph,
I don't have any examples of this. Usually you use PRNGs to generate unique numbers…
You need to create your own algorithm.
There are USB sticks available that generate unique numbers in a certain reproducable way, which are used for authentification of bank account operations. You might take them as inspiration for your task…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Combining two seperate pagemaker files into one pagemaker file.

We are having done two seperate pagemaking files in two different systems. We are in need to combine/join these two pagemaker publications into one pagemaker publication. How to do this?

There's several options.
1. If the two publications are on different PCs, then create a PDF of each and combine them in Acrobat.
2.Use the Book utility to combine the files when you print. They need to be on the same PC.
3. If the two publications are on the same PC (with all the necessary fonts and images), and the files are small, i.e. no more than a few pages, then open both publications in PM. Tile the two publications side by side. Add the required number of new pages to the first document, and have "New page 1" opposite "Page 1" of the second publication.
With the pointer tool selected in the second publication, click Edit - Select All. Then quickly drag all the objects acroos to "New Page 1" in the first publication.
Do the same for the remaining pages - hence the requirement for not having too many pages.
Use File - Save As to save the first publication with a new filename. All links to images will be preserved.

Seperate field containing date and time into two seperate columns

Hi
I have a column which contains entries which are in the format date time i.e. 27/10/2005 07:06:09
however i would like to have these as two seperate columns so the date is in one and the time in another.
how would i go about doing this in pl/sql?

im running a query in excel to graph a variable against time, however excel is not storing it correctly so when i try to use string manipulation to put the time on the x axis it's producing a long decimal number instead of the actual time.
i want to keep it in that format but also have it in two seperate columns. when excel makes the graph it will only read the same date over and over it won't get past the date to see the time changes.

Here is How to Edit clips of the same loop, which were recorded on seperate tracks, in the same way

Whiteout conditions here in the northeast, it's a Blizzard!
Hopefully this helps someone because I was banging my head against the wall trying to figure this out.
This is for people who want to precisely loop (or edit in other ways) multiple clips in the exact same way, but that are on seperate tracks playing concurrently in Multi-track view, so for instance looping 3 different tracks recorded simultaneously from a drum machine and keeping the same exact placement of each track relative to each other when trying to get the loop right (or any other type of edit)
It's all about how you switch between Edit view and Multi-track view, and you CAN'T group your clips before going to edit view, although this is counter-intuitive.
The basic jist is simple, "Selections" in the timeline, transfer from Multi-Track to Edit View and Back to Multi-Track...but you most follow a certain procedure, here is the procedure:
WARNING: THIS WILL ONLY WORK IF THE SELECTION IS OF ONE CLIP PER TRACK!!! YOU CANNOT MAKE A TIMELINE SELECTION OF MULTIPLE CLIPS ON A TRACK AND HAVE THAT TIMELINE SELECTION TRANSFER TO EDIT VIEW, AS FAR AS I KNOW.
In Multi-Track view:
1) Switch the timeline to "Samples"
2) Make a "Selection" of the part you want to Loop and zoom all the way in to the start and end points to get the loop as precise as possible, if it's not perfect don't worry just get it as good as possible in Multi-track View, then in Edit View you can find the Zero-Crossing points.
3) Make sure the clips you want to edit are NOT GROUPED AT THIS POINT
Here is the part that got me - AFTER making your Selection in Multi-Track view - you have to go to Edit view in a certain way, so that you don't de-select your selection:
WARNING: Do NOT Double-Click the clip/file you want to Edit!!! Do not double left-click anywhere in MultiTrack View or you will de-select your selection.
note: You have to edit the files one at a time in Edit View, but if you go there using the correct procedure, you can transfer your selection you made in Multi-Track view.
4) Decide which clip is the hardest to one to loop (usually it's an instrument sample rather then a drum loop but you never know)
5) Instead of double-clicking a clip to Edit it, HOLD CONTROL AND LEFT CLICK THE CLIP YOU WANT TO EDIT ONE TIME, this will select the clip without de-selecting your TIMELINE SELECTION.
6) Now that the clip you want to edit is selected, You want to go to Edit View USING ONE ROUTE ONLY --> Simply click "Edit View"
^Make sure you Timeline selection is still in place and hasn't moved do to user error (e.g. accidentally clicking the timeline or shift-clicking and moving the selection by accident <--- which I do by accident when attempting to control+click)
7) If you followed the instructions exactly, You are now in Edit View with the selected clip along with the timeline selection you selected in Multi-Track view, showing it's exact timeline location at the bottom which is relative to the Multi-Track view
IMPORTANT: YOU MUST BE CAREFUL NOT TO DE-SELECT THE TIMELINE SELECTION, AS THAT WILL DE-SELECT THE TIMELINE SELECTION IN BOTH VIEWS.
8) If you are having trouble looping without artifacts, To find the zero crossing points either go to edit > zero crossings or use shift+h or j for left edge, shift+K or L for right edge of the loop.
9) if you must adjust it manually to fine tune then make sure you shift click the file as not to de-select the entire timeline selection.
10) Once you have a perfect loop, zoom all the way in to the start and end points, and take note of exactly where the start and end points of the loop are located within the timeline.
11) Go back to Multi-track view
12 To trim the clips to to the exact timeline selection: Hold control+left_click each clip that needs adjusting one-time, then right click > group clips
13) BEING CAREFUL NOT TO DESELECT YOUR TIMELINE SELECTION, select your grouped clips by HOLDING CONTROL and clicking on any of the clips
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
WARNING: IF YOU ACCIDENTALLY CLICK WHEN THE DOUBLE ARROW ICON IS NOT SHOWING, YOU WILL DE-SELECT YOUR TIMELINE SELECTION AND YOU WILL HAVE TO START THIS ENTIRE PROCESS ALL OVER AGAIN.
15) Verify that your loop is looping correctly, in some tricky instances you may have to find different zero crossing points on the initial file you edited in edit view by repeating the above procedure, but this is unusual, although it just happened to me.
16) If everything went correctly, now all your clips on seperate tracks are looped in the exact same way, if you want to destructively edit each file down to it's loop size, you can keep your timeline selection and control+click a file then click "Edit" (the one in the toolbar of course), one by one destructively editing each file.
17) to extend the loop either set as a loop under "loop properties" and then just drag each file the number of times you want it to loop, or do it my way and right click the clip > duplicate and set the number of times to duplicate and whether to have them back to back or spaced, this is the quickest method for me.
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
-Also, you don't HAVE to group the files as I did in step 12, you can drag the edges of the clips to the timeline selection one by one, I just find it easier to group them after you have set the loop on one of the files in Edit View.
-Remember, you can't select the files one by one and have the timeline selection transfer to Edit View IF you group the files prior to going into Edit View.
GOT ALL THAT? I sure as hell don't know if I do ...
All this could be easily avoided if Audition would simply let you edit multiple files simultaneously in Edit View relative to their position on the Multi-Track timeline.
I'd also like to know why when you do a full zoom in, neither the selection or the clips will snap to the ruler points, only to just before and after the ruler points on the timeline.
And also (and this may be my fault) I don't understand why when the tempo of my session is 89.8bpm, the timeline under the tracks says "90bpm" why does it round it off..?
Isn't that inexact and couldn't that present problems with syncing loops? idk I could be wrong I can't get my head around these issues because of lack of knowledge on the subject, if someone could shed some light that would be great.

correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

Same Private AS number on two seperate MPLS provider networks

Similar Messages

Maybe you are looking for