Same programs listed with updates after updating
Everytime I update a program from the creative suite the same updates appear in the updates list time after time (the same 4 updates have appeared for the last 10 or so days).
Is there a solution for this?
Thanks.
Raymond
Hi Radavis,
Were you able to install the updates?
Can you please launch the software, go to the help menu and select " About <name of the software..>" to check if you have the updated version.
Similar Messages
-
Hi All
I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
Suppose lets consider there are A,B,C,D,E,F,G,H columns.
Now i want to create one form with the fields A,C,E.
When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
Please help me on this as it is very urgent from me..
Thanks in Advance
Sowjanya GHi,
According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
In the workflow, you can add condition and actions as below:
If current item: C equal to Test1
Set E to Test2
Then the value of the filed E will be changed based on the value of the filed C.
In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Trouble with safari after updating SL 10.6.8
I updated my OS last night to 10.6.8 and today, in Safari I find that I cannot view amazon.com When I open a page, much of it is blank. Anyone else having trouble with amazon after updating to 10.6.8?
michelle(This is a copy of my post in this thread.)
I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
But alas...
Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
Man, this is so frustrating! Anybody with any other suggestions or possible solutions? -
I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?
Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum. -
I am having problem with iMessage after updating my 5s to iOS 8.0.2
I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through
Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D. -
I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?
Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on. -
ITunes still says I have app updates after updating
I've been trying to find a solution to this for a while. iTunes will tell me I have a certain app for updating. I'll update it and after updating it still says that app needs to be updated. I've tried to delete the problematic app and re-download the app but it still shows it needs to be updated. The only solution I've found is to update the app on my iPhone and let it sync with iTunes to update it on my mac.
Does anyone have the same issue and have a better solution?This solved my problem.... tnx Vadim Tumanov
Re: iTunes still says I have app updates after updating
Jan 19, 2012 10:54 PM (in response to suprimeau)
Hi guys,
I had the same problem that I'v solved doing two things:
- update all applications on the iPhone
- go to iTunes and press File -> Transfer purchases from iPhone
That's it
Enjoy -
My iPad 2 is stuck in verify update after updating to 8.1.3. Tried pushing buttons and holding. No luck
How many times did you try the reset? Sometimes, it can take more than one reset, especially with these kinds of issues. Try multiple times. Note that you need to hold both buttons until the Apple logo appears on the screen. This can sometimes take 15-30 seconds.
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
My iTunes still wanting to update after updating..!!
My iTunes still wanting to update after updating … I try to do the updates individually I also try the option to (download all) the updates But the iTunes still asking me to updates the same publications.
Anybody out there experiencing such a problem like this one..?Hello bballkyle34,
Luckily we have steps outlined for resolving just such an error.
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers,
Allen -
what is the difference in execution time between a program written in C language and the same program made with LabView?
Hi Pepe
You cannot say which is faster, the LV or the C programm. The only way to be sure is to program in both environments and to check than. Check this for some benchmark examples:
http://zone.ni.com/devzone/conceptd.nsf/webmain/DC9B6DD177D91D6286256C9400733D7F?OpenDocument&node=200059
Luca
Regards,
Luca -
Problem with Flashplayer after updated to 10.0.42.34
I updated to the New version of adobe flashplayer on vista. Ever since then when I go to myspace which other then youtube is the only 2 places I browse. a few seconds after logging in I get an error message with the problem listed as Flash10d.ocx and it closes the browser. It happens everytime I log in. I spent 2 days loading and unloading and restarting the adobe flashplayer trying to get it to work. I finally gave up and found a link to The version I did have right before I updated. It also did the same thing now with the problem being listed as Flash9j.ocx I didnt uprade anything else or do anything on my computer to cause anything for the older version not to work as it did 2 days ago before I upgraded. I uninstalled all Adobe flashplayer completly and I can now go to myspace and youtube but I cannot watch no videos or listen to music. How Could I please fix this problem? I spent the last 2 days reading other forums and trying everything I saw and NOTHING worked. Not even a delay in the Problem as some have mentioned it slowed down after trying things. Could Someone please Help?
Russ
I copied the Original Media folder to a new location and then relinked to the new folder. The process ran without error. However that did not fix the problem. The clip content isn't there for 80% of the clips. The system was rendering in the background for hours. I went to bed. When I got up and checked using the view background tasks it stalled at some point. I tried exporting the XML and importing into a new library. I got a waring message about an unrecognized cross dissolve transition. When I opened the project in the new library the time line looked exactly the same and it behaved exactly as the original project. Thoughts? -
Has anyone had trouble with safari after updating to ios 8 on ipad
I am having trouble viewing a web page through safari after updating to ios 8 on my ipad. On the left side of my screen is a list of my favorites leaving only 3/4 of the screen to view a web page. Before the ios 8 update when I clicked on the safari icon it took me to a full screen view of my favorites with icons.
Same issue here, seems to be fine on text based websites, but any with images on struggle to load.
im on 100mb fibre, and all sites work fone on other devices, just my iPad since upgrading
its loads the site slowly, displays about 3/4 of the page once loaded -
Programs won't run after update to 10.6.7
Hi
I have just inherited an early 2008 iMac following my Dad's death a few months ago. So I have no Mac experience at all. On receiving it, I booted it up and a list of recommended software updates appeared which I ran, and by all accounts successfully installed. One of them was an update to 10.6.7
Previous to the update I could access the installed programs. Now I can access barely any of them.
Error message reads:
Application name cannot open.
Check with the developer to ensure this version of application name works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS.
There aren't any further updates needed. Every time I check, I'm advised everything is uptodate. So last night I reinstalled iTunes, downloading the latest version. That won't run. Same error message.
I'm unsure what to do now. I don't have any disks etc at the moment as Mum is still trying to locate them (they had more than one property and this has come out of one that has been boxed up and put onto the market).This is a typical error report. The section I have bolded out seems to be common in all the errors.
Process: iTunes [500]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-10221201~1
Code Type: X86 (Native)
Parent Process: launchd [105]
Date/Time: 2011-05-11 06:38:32.490 +0100
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 15167 sec
Crashes Since Last Report: 305
Per-App Crashes Since Last Report: 6
Anonymous UUID: DCCD367C-006F-4EEF-8457-3885D045DBBE
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: no suitable image found. Did find:
/System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
/System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDP725032GLA380, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000 -
Ipad mini problem with wifi after update 6.1.3
Hello!
My ipad mini was working fine before the 6.1.3 upgrade, immediately after updating, the wifi stopped working. Restore the iPad to its factory settings as deleting both my data and to reintroduce the network, was still not working.
Help please!Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Some other things to try:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Problems with publishing after updating to iWeb 1.1.2
I get the following message after updating to iWeb 1.1.2:
Can't create the file “shapeimage1_link0.png.” The disk may be damaged, full, or you may not have sufficient access privileges.
I guess my disk could be damaged, but it seems odd that it worked yesterday before the update and not today (I have the same access priveledges as before). Is there anyway I can get around this problem? I also have the newest Apple updates (10.4.8).
I get the same message if I try to publish to a folder or try to publish to .mac.
Mac OS X (10.4.8)I am still having the problem after uninstalling 1.1.2 and resinstalling iWeb and then upgrading to 1.1.1. I followed the directions. I still find it strange that it worked prior to the upgrade but not after. However, reverting to the old version has not fixed the problem.
Could it be something with OS X 10.4.8? That was also upgraded at the same time.
I even deleted my blog entry (the only thing that changed since my last time publishing) and that did not fix the problem. Thus, I cannot publish the same web page in 1.1.1 that I could last week. I have run the disk utility and repaired permissions. I am not sure what to try.
Has anyone used other software in which I could take all the pages I have created and modify them in another program? I don't mind learning a new program, but I don't want to lose everything I have. I figure it will be easier to figure out a new program if I am tweaking already existing html files.
Adobe GOlive? A macromedia program?
Maybe you are looking for
-
Having my Telus email refusing to send attachment (one meg picture), without attachment everything is OK, can receive attachments. Weird thing is my live.ca account works perfectly. All that happens is the clock and sending icon would alternate (le
-
Why do accepted meeting notifications stay in my iphone 4s inbox?
The meetings are there - I just cant get rid of them out of my calendar inbox. It says "OK" as the only option (not Accept, Decline or Tentative), but when I hit OK, it flashes nicely... then remains. Help!?
-
Export tables starting with same name format
Hi All, I need to export set of table below it_approvals it_attachments it_dev_schedule it_dev_schedule_log it_email it_email_group it_filetype it_group it_group_system it_manage_system it_menu it_page it_page_action it_parameter it_personal it_relea
-
Cannot install solaris 8 for intel
i boot a machine which has a AIC 7899 card using install CD, then choose add driver using a floppy made by downloaded ultra160 driver floppy image. the SCSI card and a hard drive thus can be found and i make two partitions,about 1G and 5G respectivel
-
How can i get games on my 30 gb ipod classic? i know its on itunes but i want to get it some were rether then itunes