Same Resolution Icons Appear as Different Sizes

Hello,
I'm going through all of my dock icons and customizing them, but I'm having a bit of trouble.
The five icons on the right, as you can see, are all working fine. However, the icon for Brackets, the application on the left, is strangely larger than all the others.
This is strange, as all of them are 1024x1024 png images, but for some reason, this one icon displays as larger.
Any advice is greatly appreciated.

What are the dimensions of both clips (in pixels)?
Where are you seeing this problem? In the Source Monitor or the Program Monitor?
If the clips have different dimensions and you have to use them in the same sequence, then your best bet will be to have the sequence settings match the smaller clip and then scale the larger one to fit the smaller sequence. That's because scaling video up results in noticeable pixelation whereas scaling down looks pretty clean. If the larger clip is also a different aspect ratio than the smaller one (like 16:9 vs 4:3), then you'll probably want to scale it so that the height of the frame fills the screen, which will mean that the edges will be cropped.

Similar Messages

  • How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1

    How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1
    A senior citizen needs some help.
    Thanks

    Saving each image as different size - is it an option for you?  I would save images with their name as: 20x30.png, 16x20.png etc etc.
    Or explain whether you want these in a webpage  in which case only one image is necessary and different sizes are displayed with good CSS code.  this is question for Dreamweaver forum if this is what you want.

  • Why does my maximised app window appear a different size to the screen resolution?

    First: I'm a beginner with windows programming, fumbling my way through visual studio and C# (my background is C with console applications)... sorry if this is a naive question!
    Short story: When I create a window of the same size as the screen resolution. My app window is ~20% larger than my device's screen. Why is this happening?
    Long story: I'm attempting to develop an application with a fixed size window and absolute positioning of UI elements. The application will only ever run at a fixed resolution, on a single device, borderless/non-resizeable and full-screen. The resolution
    of the display on which it will run is 1280x800 (according to the device specs and resolution reported by the windows control panel) . However, when I create a window of this size, it is too large to fit onscreen. In fact, I have to create a window 1024x640
    (0.8x screen resolution) for it to perfectly fit the screen. Anyone know why this is happening?
    Thanks!

    It sounds like you are running in a high-DPI mode but your app is not DPI aware and is getting virtualized. Windows will tell the app it's running at 96 DPI and then embiggen the rendered window so it ends up at the user's requested zoom level.
    See
    Writing DPI-Aware Desktop and Win32 Applications

  • Two video clips appear as different sizes

    I captured two different clips, and on the capture one is a smaller picture, while the other is a full screen picture.  What did I do wrong, or how can I fix it?
    This is on Adobe Premiere CS5.  Any help would be greatly appreciated.
    ========================================================
    Edited by moderator to shorten the title

    What are the dimensions of both clips (in pixels)?
    Where are you seeing this problem? In the Source Monitor or the Program Monitor?
    If the clips have different dimensions and you have to use them in the same sequence, then your best bet will be to have the sequence settings match the smaller clip and then scale the larger one to fit the smaller sequence. That's because scaling video up results in noticeable pixelation whereas scaling down looks pretty clean. If the larger clip is also a different aspect ratio than the smaller one (like 16:9 vs 4:3), then you'll probably want to scale it so that the height of the frame fills the screen, which will mean that the edges will be cropped.

  • CRM WEBClient UI -The same screen-menu appears for different Business Roles

    Hi Experts,
    We are working with CRM 2007 and are facing the following problem:
    After starting the CRM WEBClient , a screen with two Business Roles appears: u2018SALESPROu2019 and u2018SERVICE PROu2019 (because in my User I have added the roles: SAP_CRM_UIU_SRV_PROFESSIONAL & SAP_CRM_UIU_SLS_PROFESSIONAL).
    I select the one of the two roles (e.g. SALESPRO) and then I choose u2018backu2019 and select the other Role (SERVICEPRO) but the same screen appears with the menu from SERVICEPRO .
    I noticed that the menu that appears has to do with which business role I select first.
    Do you have any ideas what could be the problem?
    Best Regards,
    Roula

    Hi Roula,
    In CRM 2007, the CRM Webclient doesn't have the capability to switch from one business role to another directly as you are trying to do. The only option to switch is to logoff from Webclient and login in another role.
    regards
    Srikantan

  • Why photos in iPhoto (mac) have a different size (mb) than the original?

    I have noticed that some photos (not all) have a smaller size (in MB) in iPhoto than the original ones. Do you know the reasons of such decrease of size? iPhoto import procedure is supposed to not lose any information wrt the orignal one then, why the imported photos in some cases should be smaller? Thanks in advance.

    1. the source of the original size is the size that I read in the finder (not the one read in the camera).
    2. the pictures are jpg
    3. the source of the anomalous size is the info box of iphoto, the box where you can find all the exif info, resolution, iso, f-number, EV, etc. In this box you can read also the size of the photo, and here I find that for some photos a smaller size than the original one read in the finder. 
    4. for the records the camera is a FUJI S5 pro.
    5. the photos are not edited in iphoto, as said in my reply, just imported and placed in a album. I just import photos in a folder on my mac, import those photos in iphoto, and I find the mismatch of the size between the photos in the folder on my desktop with the original photos and the ones in iphoto. As said, this does not happen for all photos, but for a subset, which appears to be random, since I do not find common features in these photos. I have check in older photos imported and find similar mismatch.
    I know that's crazy, I really do not understand why this strange fact is happening. It is even stranger, that if I import twice the same photo, I read two different size in iphoto.

  • How can two pictures of the same size still appear to be a different size? (Photoshop CS6 problem)

    I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
    so that you won't be confused when you read it.
    What Happened
    For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters.
    I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm.
    My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had
    to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X)
    of the webdesign. I did this before and it worked perfectly.
    But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.
    I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop
    had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y)
    turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger
    than it was before. How can this be, and how can I still make the images(X&Y) the same size?
    What I already tried
    - I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same
    measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches.
    Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and
    when I pasted the other picture(Y) in this image, the same problem was still there.
    - I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped
    it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters.
    Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
    Could you help me please?
    I really don't understand why this problem is happening and I can't think of a solution because I am still quite unexperienced with photoshop
    and I also couldn't find the answer on the internet. I assume the solution is very simple, but I haven't found it yet allthough I have to finish this
    project soon and I also have to use the image(Y). So any help would be very appreciated.
    Thanks,
    Simone

    You need to understand the basic of a digital image.
    Image is recorded as pixels and image is a rectangle so many pixels wide and so many pixel high.   Pixels do not have a fixed size. The images resolution setting defines the image current pixel size.
    So for example if you have and image that is 300 pixel wide and 200 pixels high and set its dip resolution to 100DPI the image size is 3" wide and 2" high.  Set its dip setting tp 300DPI the image size becomes 1" wide by 2/3" high.  Both the 3" x 2" and the 1"x2/3" images have the same 60000 RGB Colored Pixels.
    Web pages are sized to to be so many pixel wide and so many pixel high.  Often the height is not enforced scrolling is used when viewing. 
    However image for web pages often must not exceed so many pixel wide and high for displays have a fixed resolution and a fixed number of Pixels. You want images to fit on users displays.  Users use different displays some have high resolution displays and other have low resolution displays with far fewer pixels then high resolution displays.
    Web Image are normally image that have been interpolated down in number of pixels a resampled large image so that web image will fit on a low resolution  display with limited number of pixels. The image size the user see depend on the display they are currently using. A low resolution display's image will be much larger then the same image displayed on a nexus 10 with a 300dip display. Cheep low cost Desktop LCD have a 84DIP resolution, large high cost desktop displays are not be much higher in resolution somewhere near 108DPI.   Tablets, Laptop and Phones can have much higher resolution like the nexus 10 300DPI IPS display

  • HT203421 I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps.  Does anyone know what is happening

    I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps.  Does anyone know what is happening here? Even updating an older game app resulted in the original game icon changing to the new identical icon that all new apps are appearing with.  This new icon is like a page with a ruler, pencil and paintbrush. Any tips on how to stop this or how to revert to the icon as it appears on the app store would be appreciated.

    https://discussions.apple.com/thread/6132949?tstart=0

  • When duplicating a field, even when the original field is locked, the duplicated fields appear at different positions on pages that are the same size. How do I make them uniform?

    I'm trying to put a hidden time stamp field on the bottom of all pages of a thousand page document, yet when I duplicate the field, the reproduced fields appear at different positions on different pages. Is there a way to make them all appear uniformly on each page. I've tried using the Lock function in the Properties menu before duplicating but to no avail. Please help.

    I go to Tools>Forms> Edit...Do you want to detect...No. Add New Field>Text Field. I lay out my field at the bottom of the page, adjust the Properties (Hidden but printable, read only, font, alignment), Lock the Properties. Then I right-click and hit Duplicate.

  • My iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if you leave it for a night the icon will remain on the screen but there will be zero percent. I tried five different charges and plugs

    my iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if I leave it for a night on charge the charge icon will remain on the screen but there will be zero percent of battery. I tried five different charges and plugs [ one in the apple store], same result. Any suggestions please?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Why am I getting different results for the same resolution but different Windows boxes, Win 7 and XP

    I am running an .exe on two different windows boxes, one in Win 7 and one on XP.  I set both for resolution 1024 x 768.
    On Win 7 (laptop and old Dell desktop) I have a great looking app.  On the WIn XP boxes all the fonts to large.  THis doesn't make sense to me as all the PC's have the same resolution.
    Has anyone run across this before?
    Mark Ramsdale
    Solved!
    Go to Solution.

    The system fonts for XP and Vista/Win7 are different.
    See
    http://forums.ni.com/t5/LabVIEW/Elements-have-moved-when-opening-vi-with-f3-patch/m-p/1054817
    http://forums.ni.com/t5/LabVIEW/What-can-affect-the-size-of-a-front-panel-object-between/m-p/1058607...
    http://forums.ni.com/t5/LabVIEW/Font-size-on-Windows-7-with-LabVIEW-2009/m-p/1055114/highlight/true#...
    and several other similar threads.

  • Photoshop showing two different sizes for same font size

    Hi folks,
    I've been using Photoshop for a long time, but this problem has popped very rarely along the way and some how remedied itself - I'd like to know this time what's causing it, and how to solve it.
    I'm in a Photoshop document, and I'm working with two different text areas. Both area registering as 14px in size in the Type menu, and yet, they're radically different in size. One is tiny, whilst the other is at least twice, maybe thrice the size. Why is this happening?
    I've checked there's no overlapping text areas and things like that, everything should be fairly normal, it just isn't.
    I'm using Adobe Photoshop CS6 v13.1.2 x64 for Mac, running on a Macbook Pro Retina 1.83ghz and 8GB ram
    Thanks in advance    

    it seems is that in CS6 when you change your font size using free transform - it "remembers" the original pt size when you select the text itself in a certain way:
    The Problem
    I am writing the text in 50 pt size
    I duplicated the document and scaled the text using free transform in 150%
    now when I click inside the text more than once and select some of the letters or even just move the indicator more than once
    it shows me it is still 50pt which is of course not true.
    so as it appears photoshop can occasionally give you the text size before you made a transformation
    The Solution
    a way to get around that is to click only once and drag through at the same time with the first initial click
    now you can see the true font size is 75 pt and not 50 pt.
    to contribute to the confusion it appears the font size in the toolbar stays the same "wrong" size so beware of that
    and if you want to be really sure you can select just the layer in the layer panel (not the text)
    and you will get your "true" font size.
    I made the same test in photoshop CC  14.2.1 and it does not act this way but instead it gives you the "true" font size even if you scale it in free transform
    and select clicking more than once.
    hope this will clarify the matter.

  • How can install a second app icon  of the same on app on a different home screen?

    how can install a second app icon  of the same on app on a different home screen?
    for example i have the phot app on one home screen and the i want the same photo app showing on the other home screens?
    I want to have a duplicate app on on more than one home screen
    Another example if i have the Evernote app showing on my first home screen and then my last home screen as well

    Put it in the dock at the bottom. Apps put there stay there and show at the bottom of all home screens.

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • Two machines saving the same file as different sizes?

    My coworker and I both have the same version of Illustratir (CS6) and both use Lion on iMacs, but today noticed something weird. He saved a file similar to a file I had done before as both an eps and a pdf and his file size was more than twice what my file sizes usually are. I thought it was odd, so I copied everything from his file into a new file (same dimensions) and saved out an eps and pdf (default settings), and like I thought, my files were less than half the size of his.
    Why would two machines be saving identical files at different sizes? Is there a setting somewhere I'm missing? Everything in the file is vector, if it matters. There's not even any editable text.

    See the mechanism of saving here: http://superuser.com/questions/66825/what-is-the-difference-between-size-and-size-on-disk
    The size of the "blocks" depends on the size of the disk and how it's been formatted.

Maybe you are looking for