Same send step for multiple receivers: BPM scenario

Hi forum,
I have a file -BPM -file scenario,
from the BPM i need to send the same message to multiple Business systems,
so, i need to make receiver determinations in the IB_directory, but it allows me to have only 1 receiver determination for a set of Sender service and message interface, so how can i have multiple receivers in the receiver determination...
i have gone through a blog which asks me to make use of "SEND CONTEXT" in the send step in the BPM and query it in the receiver determination in the IB-directory, but how to quey it? pls help
thanks

hi,
For a set of one business system and receiver u can create only one Receiver determination step.
If Want to send messages to different receivers.
Go to -> Integration Directory-> Open the receiver determination step in change mode.
Go to "Configured Receiver" step -> Click on "+" symbol to add other receivers
"Conditions" is an optional tab.
Then configure receiver interface determination and receiver agreement for the new receiver
Regards,
Shabari

Similar Messages

Same sender id for multiple participant trading partners

Hi All,
Although the scenario is little bit less common, but I have to model a Trading partner setup such a way that multiple participant trading partner will send document with same sender id but they will send the document for different unique receiver id. My question is the scenario can be supported in B2B.Thanks for your help.
Regards.

Hi,
As there cannot be two different person with same identity, similarly there should not be TP's with same Id otherwise you will not be able to identify that from whom you received the message and to where you want to send the message.
Anyways, your use case can be supported in Oracle B2B.
If you want to create multiple identities of a single host then it's very much supported in Oracle B2B.
if you want multiple hosts on same instance then it is possible by using HUB model . Please refer -
Can multiple hosts exist on single instance
I am not very sure whether you can have multiple TP's with same Id but as far as I know it is also possible with Oracle B2B.
Regards,
Anuj

One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
Regards

Hi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok

Sending meesages to multiple receivers

Hi All,
Is it psossible to send an output messages to mutiple receivers without using BPM. If so then how to do it.
Thanks
Abinash

Hi Abinash,
For sending this to multiple receivers you dont have to use BPM. You can do it by putting the condition in deciding your receiver business system in your receiver determination. For each business system which is there as a receiver you need to provide individual interface determination also...
Cheers
JK

I have One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
Regards

Hi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Same apple id for multiple devices

I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

No, a second Apple ID will not work. iTunes can already tell them apart.
When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
Do the same with the second iPhone.

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Can I use the same email address for multiple seats in Creative Cloud for Teams?

Can I use the same email address for multiple seats in Creative Cloud for Teams?

No. http://www.adobe.com/products/creativecloud/faq.html
Can I buy more than one membership to an individual offering of Creative Cloud?
No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

Handling acknowledgement for sender idoc from multiple receivers

Hi,
Problem: Sender IDOC mapped to multiple FILE receivers. So sender system is SAP, receivers are BS_SYS1, BS_SYS2 and BS_SYS3. The partner profile for IDOC is set as BS_SYS. Due to this, I can enter BS_SYS in the Adapter-Specific Identifiers of one of the services say BS_SYS1. But all three will send acknowledgements and the ack messages for BS_SYS2 and BS_SYS3 error out in MONI due to
'Unable to convert sender service BS_SYS2 to an ALE logical system' and 'Unable to convert sender service BS_SYS3 to an ALE logical system'. How do I solve this since I am not able to set BS_SYS in all three services/adapter-specific identifiers box at the same time.
Anyone have this issue before? I am guessing one option is to create logical systems BS_SYS2 and BS_SYS3 in SAP and have the aleaud messages routed to these logical systems. But when there are say scores of receivers, it is a clumsy solution.
Thanks
JB

007,
nice to have here
You have alternatives:
1. Just use one business system with different inbound interfaces / receiver agreements / communication channels and conditions at interface determination
2. Create a Business Process which is doing the split. This could lead to some minus performance but you would be able to handle the acknowledgements in a senseful way (you get 3 ackn for one send msg)
Regards,
Udo

Multiple Business Systems for Multiple Receivers?

hi,
idoc > xi -> multiple receivers with xml payload
I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
For this to achieve do we have to create multiple business systems for each receiver?
If i create a receiver in the business service how can we determine the interface mapping in this scenario?
Thanks,
Tirumal

Hi Tirumal,
For this to achieve do we have to create multiple business systems for each receiver?
As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
So if you think, your each receiver is of type different type/process then create different Business systems.
It depends~
If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
Hope this helps,
regards,
moorthy

BPM send step not executed in BPM (after Message split)

Hello everybody,
we use BPM:
We have a paralell Block which should send the rows of a multiline element. In SXMB_BPE_MONI the send step is not executed?
Any idea?
Thanks lot, regards Mario

HI,
Go to SXMB_MONI_BPE->and check the workflow log (technical details).and go to SXI_CACHE and check the return code of the Integration Process. It should be zero. If not try to activate the same
If there is no error then go with like this-
Also check the Syntax in Integration Repository with F7. Change the IP and activate it. If there is no syntax errors.
Then reimport the IP into Directory and then test your scenario
Regards,
Moorthy

Mapping help need for multiple receivers.

Hi,
I have a scenario where i have to send to different receivers based on condition.
I get a incoming message, there i have to check a field for a value.
If the value is 1, the message should go to file.
Else the should send a mail, saying the value is not present.
How to handle this in mapping and design.
Thanks

In the Integration Directory, Receiver Determination.
YOu have to give the condition in the condition editor, which opens when you click on the first column of the Receiver determination.
IN the condition editor, Chose the expression on the Left hand Side and chose the comparision operator and the value to be compared on the right hand side.
Press enter.
Give the name of your party and service in the column 2 and 4 respectively.
Add another line by clicking on + button.
Do the above steps for the second condition.
Give the Party and service for your mail system.
Craete two interface determination and corresponding receiver agreements one each for your File scenario and mail scenario respectively.
Regards,
Ravi

Control step for exception in BPM

Hi
i am tring to learn exception in BPM.
i inserted this Send step (Synchronous) in exception branch in block. and then inserted control step in exception branch.
i created Errorsend as abbreviation on exception in block.
and assigned this to system error under exceptions in send step. and then defined on Exception handler,
and now i could not define anything on exception in control step for action as Throw Exception, i am not looking at Throw alert.
i made receiver jdbc error and also mapping error in intentionally. when i see sxmb_moni, i can see jdbc error as normal process like not using exception branch.
i would like to complete exception branch and control step for finishing touches.
thanks
venjamin

hi,
send step is for synch and jdbc,,,
abaproxy to jdbc (sync)
i made receiver jdbc error intentionaly. can i send back exception log to sender system program or send email to someone?
when have you been using this function in bpm? if i am not right way.
thanks
venjamin

Action to send email for multiple recipients

Hi gurus,
Currently the user needs to send a email for multiples recipients according to the organization structure.
For example:
The user generates a complaint and the systems must notify by email the department responsible to solve this complaint, sending an email for all employees assigned into this organizational unit.
How should I configure the action to send an email for the whole departament?
Best Regards,
Gabriel Santana

HI Gabriel,
Get the email ID's of all the recipents from orgunit using FMs RH_STRUC_GET and BAPI_BUPA_ADDRESS_GETDETAIL into internal table et_mailid and then using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
For reference check the code below:
*i_message has contents of mail body
DATA: g_sent_all(1) TYPE c,
 g_doc_data LIKE sodocchgi1,
DATA: i_message LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 i_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
 i_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
Fill the document data.
 g_doc_data-doc_size = 1.
Populate the subject/generic message attributes
 g_doc_data-obj_langu = sy-langu.
 g_doc_data-obj_name = 'SAPRPT'.
 CONCATENATE g_sdltime0(2) ':' g_sdltime2(2) ':' g_sdltime+4(2) INTO g_time.
 CONCATENATE c_subject g_time INTO g_doc_data-obj_descr SEPARATED BY space.
 g_doc_data-sensitivty = 'F'.
Describe the body of the message
Information about structure of data tables
 CLEAR i_packing_list.
 REFRESH i_packing_list.
 i_packing_list-transf_bin = space.
 i_packing_list-head_start = 1.
 i_packing_list-head_num = 0.
 i_packing_list-body_start = 1.
 DESCRIBE TABLE i_message LINES i_packing_list-body_num.
 i_packing_list-doc_type = 'RAW'.
 APPEND i_packing_list.
Add the recipients email address
 LOOP AT et_mailid.
 CLEAR i_receivers.
 i_receivers-receiver = et_mailid-email_id.
 i_receivers-rec_type = 'U'.
 i_receivers-com_type = 'INT'.
 i_receivers-notif_del = 'X'.
 i_receivers-notif_ndel = 'X'.
 APPEND i_receivers.
 ENDLOOP.
Call the FM to post the message to SAPMAIL
 CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = g_doc_data
 put_in_outbox = 'X'
 commit_work = 'X'
 IMPORTING
 sent_to_all = g_sent_all
 TABLES
 packing_list = i_packing_list
 contents_txt = i_message
 receivers = i_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Regards,
Amit
*Always reward points for helpful answers
Message was edited by:
 Amit Kumar

Same send step for multiple receivers: BPM scenario

Similar Messages

Maybe you are looking for