Same serial no. can be used in GR for consumable procurement

Dear Experts,
We receive goods against PO. For PO w/o account assignment(stockable procurement), during goods receive for a meterial which as serial number profile, SAP does not allow same serail to be posted for same material but for PO with account assignment ( comsumable procurement) same serial number cab be given in serial number tab for multiple goods receive which is duplicate posting. SAP should not allow serial xyz to be posted for material 123 more than one time.
Kindly advice what to check and how to resolve this error.
Thank you.
Best regards,
Zusen

Hi, Thank you for your valued reply.
If the scenario is sap std. then what is the explanation of sap for this. If same serial number is received for mutiple MM doc and equipment number is same for multiple goods receive doc, what will be asset value of the quipment..
Please advise
Kind regards,
Zusen

Similar Messages

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • If i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

    if i have multiple iPhones and Mac Mini sharing the same Apple ID, can I use Facetime between the devices?

    Yes, but if you want these devices to have complete capability of calling each other they each must have their own separate, individual e mail address.  If they don't have individual e mail addresses, the i phones will be able to call each other because you'll be using their  individual phone numbers -- the Mac mini will be able to call the i phones, but, the iphones will not be able to call the Mac mini.  This is because the iphones will be using the mini's e- mail address to make the call, and if they have the same e mail address, they will think they are calling themselves, so the call will not connect.
    So, the way I see it is,  if you keep all of the email addresses the same, the only thing you'll loose is the ability of the iphones to call the mini.
    EDIT:  Thinking about it, my first sentence needs to be modified.  Your iphones can share an email address but it must be different from the Mac mini address.
    This isn't rocket science, but it can make your head spin. LOL

  • I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

    I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

    I don't want to spend the money on the HDMI connector and HDMI splitter if it won't work.

  • Can you use time capsule for your mac and have readynas backup your pc's on the same network

    Can you use time capsule for your mac and use readynas to back up your pc's on the same network

    Sure, that is trivial setup.. they both have different names and IP addresses.
    You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • How can I use jbo:InputSelect for a char type filed?

    How can I use <jbo:InputSelect for a char type filed?
    I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
    There is a problem:
    If I use (in the "DataEditComponent.jsp" file)
    <jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
    to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
    Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
    I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
    I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

    If I were in your shoes, here's how I would do it:
    <%-- Assuming you have dsRoom and dsResponsibility --%>
    <%-- Select is an HTML tag --%>
    <select name="ROOM" size="1">
    <% char roomID =""; // Init your character var
    // Open a rowsetIterator to get the records and add them to the LOV
    <jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
    <% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
    // add the value to the LOV
    %>
    <option value="<%=roomID%>"><%=roomID%></option>
    </jbo:RowsetIterate>
    </select>
    If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
    //Set the current record's char
    char curRecord = (char)rowEdit.getAttribute("ROOM");
    // inside the iterate:
    if (curRecord == roomID) {
    <option value="<%=roomID%>" selected><%=roomID%></option>
    } else {
    <option value="<%=roomID%>" ><%=roomID%></option>
    Hope that helps!

  • Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

    Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

    Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary.  But you won't be able to backup that library as it will be on the same drive as the TM backups.
    It's not recommended.  An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
    OT

  • Can I use a substitute for the Sample Clock?

    I have three different analog inputs coming from one device (PCI-6221).  Two inputs are running at the same sample rate while the third needs a faster sample rate and a trigger.  I have these seperated as two seperate tasks but my problem is they both use the sample clock.  Can I use a substitute for the sample clock on the third channel?
    I am running LabVIEW 8.2 on Windows XP.
    Thanks in advance for your help.
    Ron Deavers, CLD

    Hi programmindragon,
    I understand you are trying to
    configure your PCI-6221 to sample on multiple channels, while having
    different rates and triggers for the channels. Unfortunately, you can
    only configure one analog input task to run at once and all the channels in
    the task must share the same configurations, including the sample clock
    and trigger. This is due to the fact that all the channels are
    multiplexed to a single amplifier and ADC on the device. Thus, you will
    not be able to configure the two inputs at one rate and use a different
    clock rate and trigger for the third input. Is it possible to sample at the
    maximum rate on all channels and decimate the data that you don't need on the certain
    channels, as well as share the same type of triggering? Hopefully you will be able to run your application with the same configuration across multiple channels, otherwise you may need multiple DAQ devices. Please let me know if you have any further questions related to this issue.
    Regards,
    Daniel S.
    National Instruments

  • I know I get 2 downloads. I have one on my Mac. Can I use the other for my PC laptop?

    I know I get 2 downloads. I have one on my Mac. Can I use the other for my PC laptop?

    Hello david,
    that's correct. Cloud software can be installed on Mac and/or Windows for no extra cost. No platform swapping process is required.
    On the Mac simply sign in to creative.adobe.com with your Adobe ID and download the software. Same as you did on the PC.
    Hans-Günter

  • Can i use vps's for linux edge server's???

    I can stream to edge server on fme------>windows7-edge ------> origin-linux-dedicated--and or--vps------>website works...
    but cant do fme---->linix-edge-vps------>linux-orgin-dedicated--or----vps------>website Doesnt work
    nore can i do fme------>linux-edge-vps--->windows7-origin---->website Doesnt work
    All using latest centos tried and same results with ununtu
    so am i out of luck for using vps's?
    any help would be great thanks

    yeah no that doesn't work but get this...
    when i publish to windows edge server the signal gets sent to origin vps  then to viewers...
    but if i make windows origin and vps edge server is does not work dont understand why this is happening
    Date: Wed, 22 Dec 2010 01:45:19 -0700
    From: [email protected]
    To: [email protected]
    Subject: can i use vps's for linux edge server's???
    I agree load balancing part but load balancing should be done in context of subscribing and not in terms of publishing. You can do failover in context of publishing using Multi-point publish.
    If you publish directly to origin and then introduce edge servers for subscribing do you still face issue.
    I mean if you set up your linux VPS as edge and then subscriber goes through that edge - say like rtmp://linuxedge/?rtmp://origin/live - does this work?
    Can you try that out and let me know.
    >

  • Can I use ipad charger for iphone 6

    Have retina iPad.  Can I use that charger for new iPhone 6?
    Thanks.

    Yes, the new iPhone 6 uses the same lightning cable.

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Can I use touch ID for App Store without using a passcode?

    It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

    From the article:
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
    In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
    After restarting your iPhone 5s
    When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
    To enter the Touch ID & Passcode setting
    and
    You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
    you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
    Regards,

  • Can I use a domain for one site and mobile me for a different site?

    Can I use a domain for one site and mobile me for a different site?
    I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

    Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
    OT

Maybe you are looking for