Same shooting, multiple lenses, how to apply the appropriate lens correction when importing ?

Hello everyone,
How do you handle this:
For each camera, i have a default preset i'm choosing manualy and applying when importing my raw files into lightroom.
I'd like to also add some default lens correction to those presets.
The problem is that multiples lenses (meaning different corrections) may be applied.
How to apply the correct lens correction for each file, in the batch import ?
Thanks for your ideas ...
Aymeric

Update your existing develop presets so that the Lens Corrections are checked (see attached screen shot). Select the develop preset in Import dialog. Lr will automatically apply the appropriate default lens profile to each individual image during import.

Similar Messages

How to exclude the selction in BW When importing Transaction data from Info provider

Hi ,
I am trying to Import data from BW infoprovider to BPC cube through Data manager . It works ok if i select Year 2010-2014,value type.
But i have G/L account i want to import from 100000 to 100129 exclude 100130 again include 100131 to 999999 .How do i achive this .
I selected the accounts 100000 to 100130 in one line and 100131 to 999999 in different line it did not work .
when i select this it simply errors out with 0 records selected .
Best regards,
Sreedhar .

Thank you that is the issue . I used the same formula for INT_ORDER i am getting
EXTERNAL INTERNAL FORMULA
00000?????? ??????
000001003951 is invalid or is a calculated member
if i use
EXTERNAL INTERNAL FORMULA
* js:parseInt(%external%)
I am getting
1 ,NO_COST_CENTER,DS_CPX_ACTUAL,NO_EX_DEPT,NO_LOCATION,NO_PLAN_ID,NO_REQUEST_ID,USD,ACTUAL_TEST,ACT,160020,NaN,2012.DEC,1.00
Line1 :Dimension: INT_ORDER member: NaN is invalid or is a calculated member

Address book has same entries multiple times how can I go back to original cesium

Address book has same entries multiple times how can I go back to original cesium

After a couple of days, I'm noticing that the repeat(ing) offenders have more than 10 episodes, and seem to keep repeating them every time I sync.
They only show once in my phone and in the iTunes Podcasts, but through iTunes and looking at what's in my phone is when I see the repeats.
Even after I've marked a podcast as played, and deleted it from within my phone, as well as telling iTunes to delete the played episodes, it still shows multiples of the played episodes.
There doesn't seem to be any rhyme or reason to it either. They aren't the newest ones either.

How to apply the Patchset 7 to Forms 6i

Hi all !!!
I need install the PatchSet 7 in the iAS Server 1.0.2.2.2 (concrectly at the Forms Server Service).
I had stopped all services of Oracle, and had applied the patch. But the services of Forms and Reports is missing after.
Any idea.
How to appplies the patch?
Thanks and best regards.
Carlos Hernandez
Barcelona (Spain)

848478 wrote:
How to apply the latest patch set for all the Installed Modules in 11.5.10.2 along with the Roll up's if any.https://forums.oracle.com/forums/search.jspa?threadID=&q=Latest+AND+Patchsets&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Latest+AND+Patches&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to expand the hierarchy column automatically when delivery reports by a

Hi Experts,
In OBIEE 11.1.1.6.0,how to expand the hierarchy column automatically when delivery reports by agent?
For example:
In SampleLite RPD, when we drag "Time Hierarchy" and Sales column into the report , and sent it by agent ,it will only display "Total" sales, not show all level value,such as Year,Month,Day.So how to expand the hierarchy column automatically when delivery reports by agent?
If we expand all levels and save them, it will be ok, however, when we add new data, it will be collpased automatically and not show the lowest level data, requiring Users or Developer to modify this report for expanding the hierarchy. We think it is very trouble, is there any good suggestion or method for achieving our requirement?

958054 wrote:
Hi Dpka,
Is it any difference? I look at the result is same.
Firstly, you said it is 'Add member of ',
Now, you said it is 'Keep member of'
Could you please tell me which options I must select ? Thanks very much.Here is some notes from the documentation to make a better sense of how those two options would work:
•Selection steps — When you create selection steps, you can add a group or a calculated item in a step. Subsequent Keep Only or Remove steps might reference members that were included in the group or calculated item.
◦A group list is affected by members that are kept or removed in subsequent steps, but the group outline value remains the same. For example, suppose the MyNewYork group contains Albany and Buffalo and its value is 100. Suppose Albany is removed in a later step. The value of the MyNewYork group remains at 100, but Albany is no longer listed with the group.
◦A calculated item is not affected by members that are kept or removed in subsequent steps, because removals can affect the components of the formula.
•Groups and calculated items — A step can include a group or calculated item. Groups and calculated items can be used only with Add steps; they cannot be used in Keep Only or Remove steps.

HT4101 How is the photo size affected when importing from the SD card to ipad (2) ?

How is the photo size affected when importing from the SD card to ipad (2) ?
If they stay the same, any options I can have to "re-size" the photos so that I could use it for a photo storage when traveling?
Thanks.

To re-size, you can use:
https://itunes.apple.com/sg/app/simple-resize/id327776379?mt=8

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to create the pricing procedure for domestic & import.

HI,
Pls any body let me know how to create the pricing procedure for domestic & import.
what is the use of the keys
step condiiton condition type from to manual required statistic subtotal requirement caltype basetype.
how system will work based on this.

Hi,
Please see below WIKI for your reference:
http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
Regards,
Ninad Kshirsagar

How to stop the prodution order creating when the product is not valued?

Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!

Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S

How to get the full image directory when i upload the image to web page???

hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..

There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html

Can someone tell me how many seconds the cross fade is when running your nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.

can someone tell me how many seconds the cross fade is when running your Ipod 6th Gen nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.

You aren't losing any time in that mode, but I believe it is a 10 second fade out/fade in.

How well does the Droid Charge do when dropped accidentally?

how well does the Droid Charge do when dropped accidentally? any screen or internal damages?
I'm probably going to have some kind of rubberized case.

Please consider getting an otterbox commuter case at least from amazon or otterbox.com
the defender series otterbox case with screen protector case isn't being shipped yet so i am using
the otterbox commuter case with verizon wireless store's 3pack of screen protectors - i do not like screen protectors but verizon sells the ones for the charge specifcally and it will
hold me over just fine until defender ships in august or september
either case helps to not accidentally press the power button easily while holding this droid Charge
there's my advce
ps these add bulk to phone i like the commuter case it is way sturdy polycarbonate or whatever STRONG black plastic with port covers except for hdmi that already has a cover built into phone
the defender series will be bulkier

Same shooting, multiple lenses, how to apply the appropriate lens correction when importing ?

Similar Messages

Maybe you are looking for