Same Storage Unit number for both source & destination storage bin

Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
An early response is very much appreaciated

Hello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin:

Similar Messages

Can i maintain a same number for both the customer and vendor

Hi all,
i have a scenario, as a vendor is supplying some assembly components to the client. the client is assembling the components. and sending the same to the vendor
since the same person is acting as a vendor and a customer i want a common number for both the vendor and customer in their master data's.
Thanks
KV
Edited by: krishna vamshi on Nov 27, 2010 12:20 PM

It's not mandatory to use the same ID for vendor and customer if they are the same entity, you can use different IDs w/o any problem.
It might be difficult, if you are using internal number assignment. It may occur that the ID is already occupied by a vendor or customer.
You can link your customer to your vendor both in XK01/XK02 (LFA1-KUNNR; control tab) and XD01/XD02 (KNA1-LIFNR; "Control Data" tab). One assignment is enough.
In this case you can always see, which customer belongs to which vendor.
Sometimes plant vendors, customers are defined via external number assignment, to have the same ID as the plant, but this should be decided in advance...(separate account group is used generally, with separate number range)

SAP EBS error - Same Bank Account number for 2 different Account ids

Hi,
My client maintained the same Bank Account number for 2 different Account Id's within the same housebank.
He has maintained Account id HELCO ( Local cheques) and HEICO ( International Cheques) and assigned same Account Number for both in the same house bank.
I am getting error " "same bank account exists in several company codes -> see long text, Message FB757" while uploading EBS file ( BAI2 format) due to this..
How do I resolve the issue.
Why is SAP allowing to maintain same bank account nos for different account id's?

Hi Aravind
I too faced this kind of situation when i am dealing with multi cash format file
As far as i know when you are dealing with EBS, system will check account key and account number that is present in the bank file
Please check the entries in T012K table with bank key and bank account number
You should not have more than one entry with the combination and i am surprised that even though you have different bank key for the same account number you got this message..
I request you to check the T012K table entries and make sure that no duplicate entries exists with the bank key and bank account number combination
Regards
Prasad

I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

Yes

The same Object Version Number for the same person id multiple times

Hello all,
I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

Hi Baal666bobo,
The person table is date-tracked, so the PK has effective start and end dates as well.
Get the correct record with sysdate(or any particular date) and then check the OVN.
Cheers,
Vignesh

Same message code & function for both Sales & Purchase order idoc.

The same message code and function be used to send both sales order and purchase order idoc?

Hello,
You can use the same message code and function to send for both sales orders and purchase orders provided if you use different message types i.e., output types in the outbound partner profile configuration for processing these transactional data.

F110: same bank account number for different customers

Hi Guru,
when I run F110 for different customers (payment method Ri.Ba.) in the payment proposal I see the same account number for all the payees, in particular the account number of the first customer is duplicate for the second one.
So in table REGUH the fileds ZBNKN and ZBNKL have the same value for all the customer selected in the payment proposal.
Can anyone help me?
Thanks.

Hi abaper,
   again, corrections 1030848 incorporated in the note [1617466|https://service.sap.com/sap/support/notes/1617466] for the enhancement object BANKEN_AUSWAEHLEN_CUG_IT are missing for the release 605, support pack SAPKH60505.
Mariagrazia what correction instructions you have implemented to correct your problem? It's related to the account number of vendors or customers?
For customer's accounts I've developed a temporary solution related to BANKEN_AUSWAEHLEN_CUG_IT:
Delta001
Context Block
                I_REGUP          LIKE REGUP                .
STATICS:TMP_TPBANK_IT LIKE TPBANK,
Delete Block
      LIFNR_TMP     TYPE LIFNR,
Insert Block
      LIFNR_TMP     TYPE LIFNR,
      kunnr_tmp     TYPE KUNNR.                  "MITCH 18012012
Delta002
Context Block
      REFRESH:TMP_TPBANK_IT.
      LIFNR_TMP = I_REGUP-LIFNR.
   ENDIF.
Delete Block
    IF TMP_TPBANK_IT[] IS INITIAL.
Insert Block
   IF kunnr_tmp is initial.                     "MITCH 18012012
     kunnr_tmp = i_regup-kunnr.                 "MITCH 18012012
   endif.                                       "MITCH 18012012
   if kunnr_tmp ne i_regup-kunnr.               "MITCH 18012012
     clear: tmp_tpbank_it.                      "MITCH 18012012
     refresh: tmp_tpbank_it.                    "MITCH 18012012
     kunnr_tmp = i_regup-kunnr.                 "MITCH 18012012
   endif.                                       "MITCH 18012012
    IF TMP_TPBANK_IT[] IS INITIAL.
Waiting for corrected instruction note, hope this hint helps..
Regards, Mitch.

Same Meter Serial Number for 2 devices

Hi Experts,
For Gas Business, there is scenario that two different meters can have the same meter serial number and be at different locations.
Therefore we need SAP to be able to handle the same meter serial number but treat them separately under two different MPRN/installations.
Is there any way in SAP we can have meters with the same ID?
I know if they are of different device categories this is possible but they are all of the same device category.
Please advise how this is possible? And also how the incoming and outgoing meter reads will be handled?
Thanks!

Hi Saurabh
As the previous poster already pointed out, the combination of material and serial number has to be unique within SAP.
I would actually question the data quality of the existing system, if there's a duplicate serial number for the same material, because it defies the purpose of a serial number.
Yep
Jürgen

I currently have an ipod touch 4th generation for my daughter. I just bought the same ipod for myself. Before I set it all up, i want to know if i can use the same email/apple id for both of them???

My daughter has an ipod touch 4th gen. I just bought one for myself but dont' know if I can use the same email/apple id ??? i'd like to but dont want issues w/ facetime, etc. Please help!!

I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure the birthdate yo specify results n an age of at least 13 years old.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

Same business partner number for SRM and backend system

Hello all, I am working in SRM 7.0 in a classic scenario.
I am trying to replicate vendors from backend system to SRM, but I want that all vendors have same number in two systems, for example:
Vendor 1000 in backend shows as 1000 in SRM
How can I do it?
Thanks in advance
Rosa Rodríguez

Hello,
A. You need to customizing settings in SRM system
1. Define Number ranges as External (Same number ranges which are maintained in R3 backend sytem)
(Tcode:BUCF / Path: IMG --> Cross-Application Components --> SAP Business Partner > Basic Settings> Number Ranges and Groupings --> Define Number Ranges)
2. Define Groupings and Assign Number Ranges (Path: IMG --> Cross-Application Components --> SAP Business Partner > Basic Settings> Number Ranges and Groupings --> Define Groupings and Assign Number Ranges )
B. Before replication you need extract payment terms and UOM in SRM system & Create the Vendor root org structure (Tcode: PPOCV_BBP)
@Experts: Please add if i miss any thing apart from this.
Regards,
Suneel Kumar Singan

My wife and I have both Iphone 5 and 5c. We have currently one icloud account and the bill is under one account number for both phones. We are not set up right. We want to be able to share only contacts, calendars, pictures, music. How do we do this.

My wife and I have iphone 5 and 5c. We want to only share contacts, calendar, music and photos. We currently have one iclud account and are billed under one customer number. How can we accomplish this?

Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

I had an iPhone 3GS and then I bought an iPhone 5. I have same apple I'd for both of the devices. Suddenly my iPhone 3GS buggered off and I had to buy a new one. But when I set up new iPhone from iCloud I hit data back up from iPhone5 instead of old 3GS.h

I want to get data from iCloud on my new 3GS . But while setting up I used data from iPhone 5 . How to revert back? I want to get rid of back up of iPhone 5 on my new 3GS and want back up of old 3GS on new one.

Assuming you do have an icloud backup for the old 3GS, then on the new one -
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US

Can the same name be used for both an iCal calendar and reminder list?

In iCal, I have a Reminder list named "Home". I have been trying to also give a Calendar the name "Home", but iCal does not seem to want me to do this. When I try to use the name Home for a Calendar, it changes it to the name "Home C" (a name that I gave it when I couldn't get it to let me use "Home"). Is this a restriction within iCal? I have iCal synched with iCloud, which in turns syncs with an app called 2Do on my iPhone. I am not sure if that may be part of the problem.

Yes, it can
Stedman

Proposal of same destination storage bin as source storage bin

I am using the function module: 'L_TO_PREPARE_ITEM_INT' for finding out the destination bin. But I am getting the same storage bin of source bin for destination bin proposed thru this FM. It doesn't make any sense. How can I avoid proposal of same storage bin. Is there anything to do in configuration or any userexits can be used to avoid this problem.

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Same invoice number for two delivery documents

Dear Folks,
We are having the following business flow:
Contract- S.O.- Del- PGI- PI- Excise Invoice- Commercial Invoice
Now The system is generating the same commercial invoice number for two delivery documents.
1.The two deliveries have 40 and 50 MT of materials respectively.
2. The proforma invoices are separate for both and have quantity 40 an 50 MT respectively. Excise Invoice is also diffrent and of right quantity for both of deliveries.
3. In one of the delivery (40 MT) it is showing aditionally "Confirmation of service" in document flow.
4. But while doing commercial invoice the system created a single invoice with quanitity 50 MT ONLY.
5. In the document flow of both deliveries it is showing the same invoice number.
Please advice.
Thanks in advance.
Raghu

Hi Raghu
In standard settings,system always tries to combine the deliveries into one invoice if they have same Payer, Billing data, Destination country,Payment Term and same Incoterm.
This is controlled by the routine "001" in the copy control table "Delivery to Billing" (t.code VTFL).
Possibly, in your case, the above criterias are same and routine is "001" in the copy control table.
If you want separate invoice for each delivery, then in the copy control table (t.code VTFL), go to item level and in the field VBRK/VBRP field put routine "003" and save it.
Now, system will create separate invoice for each delivery even if the above criterias are same.

Same Storage Unit number for both source & destination storage bin

Similar Messages

Maybe you are looking for