Same tax code to inventorise and non-inventorise the excise

hi
My client want to use the same tax code to inventorise and non-inventorise the excise values.
Requirement is as follows:-
two plants- plant1 is excisable and plant2 is in excise free zone.
tax code is T1 - 16 % BED + 2% ECS  + 1% SEcess
they want to take the cenvat credit in case of plant 1 while doing procurement
ans want to inventorise the excise on material cost in case of plant 2.
I suggested them to use two different tax codes in which one is having the non inventorise condition types and other is having the inventorise condition types.
but they want to use the same tax code
Is it possible to do this ??
Regards
Anin

Hello Anis,
Use two different Tax code. Let's A for used as dedectable Tax(Convet Benefit)
A should have Coditions like this 
Deduct able tax:-
          JMOP    - IN BED Settoff %
          JEC1     - A/P Edu. Cess Settoff
          JSEP     - IN A/P H Ecess Setoff
          JVRD   - A/P VAT RM Deductable
Also maintain its settoff 100% for all the condition Type.
JMX1 --     IN: A/P BED setoff
JEX1 ---      Ecess Setoff Sta
JHX1     IN: A/P SECess SOTot
Now for Non-deductable Tax(Inventrised) suppose ur Tax Code B
B should have condition Like this
JMIP   - IN BED
JEC2 - A/P ECESS
JSEI - H Ecss
JVRN - Vat
maintain the percentage in FV12.
Now for CENVAT benefit, in J1ID, maintain Material And the Plant both for whom you want the benefit
Hope Solve U !
Regards,
Pardeep Malik

Similar Messages

  • Can Same tax code be assigned to 2 different wage types?

    HI Friends,
    Can you tell me if same tax code can be assigned to different wage types.
    Scenario is, my client is a group of 4 companies, of which one company gives Child education allowance twice in a year, where as other groups pay once in a year. Till now they used same wage type and this is maintained with Tax code SCEA as 1200. So, when the first company tried to give the allowance twice, system would consider exemption also twice, summing it to 2400.
    So, i created a new wagetype and assigned the same tax code (in table V_T7INT9) with exemption amount as 600, so that if my client enters allowance twice a year, they get exemption twice summing to 1200.
    But, i noticed that, the assignment had implications of the other wagetype with same tax code. System was not considering the exemption.
    Finally i could infer that, same tax code cannot be used for more than one wage type.
    Please help me in my inference. I dont know if im right!!!
    Regards,
    Pranitha

    Hi,
    Thanks for your information.
    Since, the companies have employees of all levels, same allowance groups will definitly be used by all the companies,.
    I will work out as per the scenario you told me and check the posiblities with the allowance group. but i think this is going to be a bit big exercise.
    I did work out with same different wagetypes and same tax code and this was not working fine. I knew there was some restriction & didnt knew what.
    My idea is, atleast to work out a reason to give to my client if something is not possible to give them. They just want a valid reason & im looking for one now.
    If anyone has any sugestions to give me, please do...
    Regards,
    Pranitha

  • Two different tax rates in same tax code

    hi,
    I have a client requirement as follows. A tax code is created for 12.5% cenvat. This tax code  is used by one company. Now the same tax code will be used by second company but in some of their transactions they want 5% cenvat and balance 7.5% to be transferred to inventory.
    Can such a config be done with same tax code with condition types or something? PLZ help in this issue. FYI  the client does not wants a separate tax code to be created as volume of transactions with 5% tax rate is very less.
    thanks and reagdrs
    Tanuja NAik
    FICO consultant

    Unfortunately, same tax code can't be used with different rates. In your situation, it's inevitable to create another tax code.

  • Definig tax codes for sales and procedure

    Hi,
    I am getting an error in definig tax codes for sales and procedures.It's asking for Tax Jurisdiction.But can't accept whatever I enter.Please advice.

    Check availability at SPRO-Financial Accounting (New)-Tax on Sales/Purchases-Basic Settings-Specify Structure for Tax Jurisdiction Code   OR Define Tax Jurisdictions
    Srinivas

  • The tax code entered is not defined in the company code country.

    Dear sap guru's
    I am facing a problem while doing invoice or while cancelling the invoice or even during Subsequent Credit/Debit
    Tax code V0 in procedure  is invalid
       Message no. FF704
    Diagnosis
       The tax code entered is not defined in the company code country.
    System Response
    Procedure
       Check and, if necessary, correct the entry.
    Procedure for System Administration
       If it is not an input error, check and possibly change the system
       settings.
       To do this, choose Maintain entries (F5).
       1.  Check whether the required tax procedure has been allocated to the
           company code country. The Procedure field is on the detailed screen.
       2.  If you need a new tax code, you can create one yourself.
    For this i have checked the assignment of company code and tax code V0 in Tcode (OBCL)
    In FTXP the tax code is created in country IN, for the same tax procedure and the tax is a input tax.
    please suggest what could be the exact problem
    Regards
    Sujit

    Hi Sujit,
    1.Go to FTXP and create tax code V0 for country IN and procedure ZAXINN.
    2.In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
    3.Also things to be checked
    1> assign country to company code
    2> assign company code to tax code
    3> create tax code for country IN
    4.Under the following menu path, pls check if you have assigned your tax code to Company Code
    IMG>Logistics (General)>Tax on Goods Movement>India>Basic Settings>Determination of Excise Duty>Condition Based Excise Determination>Assign Tax Codes to Company Code
    Hope it clears,
    Rahul.

  • The tax code entered is not defined in the country for this company code

    HI ALL
    when we relase billing document to finance i am getting this below error
    Diagnosis
        The tax code entered is not defined in the country for this
        company code.
    System Response
    Procedure
        Check and, if necessary, correct the entry.
    Procedure for System Administration
        If it is not an input error, check and possibly change the
        system settings.
        To do this, choose Maintain entries (F5).
        1.  Check whether the required tax determination procedure
            is assigned to the relevant country. the Procedure
            field is in the detail screen.
        2.  Create a new tax code if required.
    Thanks & Regards
    Aarman

    You can define the tax code for your country using the following menupath in customizing:
    IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a  Input tax or Output tax and then maintain the appropriate tax percentage and save.
    Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
    Hope this helps.
    Regards
    SATYA

  • I upgraded the iphone software to 4.2.8 and none of the purchased apps would open.  I then restored the software and now all those apps are GONE.  How do I get them back?

    I upgraded the iphone software to 4.2.8 and none of the purchased apps would open.  I then restored the software and now all those apps are GONE.  How do I get them back?

    I have EXACTLY the same issue.  I would appreciate the response also.  Was not prepared for this.

  • I have a white/grey screen and none of the suggested operations have helped, what should I do?

    I have a white/grey screen and none of the suggested options have worked - I have tried all the suggestions on Apple support

    Ok, I've had this problem before and contacted Applecare support and they told me that it was an issue with the RAM inside the Mac or something like that. They told me to refresh the ram, and it fixed the problem so that's what I'd recommend.  Here's how to do it.
    Hit Power button, then press and hold Command + R + Option + P at the same time.
    This resets the residual ram that is causing the start up to hang.
    Try that, I hope it works for you.
    broken_mirror

  • Premiere Pro CC only using 30% CPU and none of the GPU

    Hi,
    I’m very new to video editing (actually I have no Idea what H264, or avi or mp4 or mov is, I just need the video to work) and I have never used Premiere Pro before. Now I'm trying the CC 7.0 trial.
    My goal is to achieve the fastest rendering times possible.
    Today I have upgraded my PC for maximal performance in video editing:
    Intel i7 4930K (12threads)
    Radeon 6950 (2GB)
    16GB RAM
    SSD
    I have a recorded video of me playing a PC game in .avi 2552*1348 resolution (2560*1440 monitor without some borders).
    I have set export to H.264 and settings to match source (resolution 2552*1348, 30 FPS, Progressive, Square pixels, NTSC, main, 5.0).
    But when rendering (no effects, just cutting) the program only uses 22-45% of the entire CPU and none of the GPU.
    The best result with this stress was cca 1:1 rendering:movie length. I'm using 16GB RAM, I tried 32GB and 64GB and the stress on CPU and GPU was the same and the rendering times changed only slightly.
    I have an SSD and the read write speeds during rendering are 1-9 MB/s so there is plenty of performance left.
    Frankly, this 1:1 performance offers Power Director 11 which I have been using so far. (When editing 1080p the ratio in PP is cca 1:2,5, the same as in Power Director.)
    So when the disks are idle, the GPU is idle, more RAM changes nothing and the CPU only works on 1/3 its capacity, what is the bottleneck?
    I want to use 100% of the CPU and 100% of the GPU and have the rendering:movie say 0,3:1 or so.
    What can I change to fully use the processing power of my computer?
    Thanks

    Start reading here: Tweakers Page

  • Tax code V1 does not exist in the system (T007A)

    Hi all,
    Need some expert help here. I'm testing this travel management solution provided by SAP. I have configured all so that the functionalities are apparent in the ESS Business package. Unfortunately, when i tried to create a 'travel request' via SAP Portal, i'm getting the error message "Tax code V1 does not exist in the system (T007A)". The error message appears once on review page.
    Since this is a Sandpit environment, i believe taht there might be numerous missing config. Can anyone point me to the right direction? Thanks
    Regards

    Hi All,
    Thanks for the quic reply. That solved the problem for travel request. I maintained tax type V1 and N1 and all is good. However, i got another new error now when i try to create my travel expense. After filling up all the necessary info (tested for accomodation booking), i got the following error:
    "Entry not found in table T706V. Argument: 14P EUR L 0191520080909"
    I went to that table but couldn't make sense out of it. Any pointers please? Thanks
    Regards

  • I have the iPad 2 (verizon). The lock rotation is always on (can't change it) and NONE of the sound effects work.

    Since yesterday evening, the lock rotation icon is stuck on, and none of the sound effects work. I have factory restored and restored from a backup twice, same result. And I'v checked the headphone jack.
    Am I missing something?
    THNX

    Assuming that you havn't turned the volume completely down, then have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar (and similarly for rotation lock) : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • My Firefox crashes every time I open it and none of the steps in the database solve the problem. My crash signature is PaintFrame(nsIRenderingContext*, nsIFrame*, nsRegion const&, unsigned int, unsigned int)

    I tried opening it in safe mode and none of the other help tips in the database on firefox crashes when I open it apply to me. I also ran a couple of virus programs to check for any infections and found nothing. I had been having issues with java previous to firefox beginning to crash. So I attempted to uninstall java from my computer but it did not help.
    My crash signature is PaintFrame(nsIRenderingContext*, nsIFrame*, nsRegion const&, unsigned int, unsigned int) and a search of this term on Mozilla Support pulled up no results.
    I'm not terribly knowledgeable with programming so any suggestions would help!

    I read online about a "clean reinstall" of firefox which seems to have worked! They should include direction on this on their page: https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it

  • So I made a new account on my computer for my sister, and none of the music that I put on the computer from CD's i no longer have aren't on there, The purchansed ones are on there.

    So I made a new account on my computer for my sister, she had a lot of music on her ipod, i opened itunes for her and none of the music that I put on the computer from CD's, That I no longer have, are on there, The purchansed ones are on there though. But when i go back and log onto my account all of the music's there. Please help me.

    For music that you've purchased from Apple that are on your iPhone you should be able to copy to your computer's iTunes via File > Transfer Purchases. Also if you are in the US then you should be able to re-download past music purchases for free : http://support.apple.com/kb/HT2519
    For your own music that you've copied, then if you haven't got a backup on, for example, external drives or CDs/DVDs then you could see if any of the utilities mentioned in this old post still exist and work

  • HT3014 my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.

    my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
    my laptop is a 2008 model

    Hmmm... 2008 MBP has...
    Video (Monitor):     1 (DVI)
    Details:     Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html

  • Just got a new mac computer and none of the music from my old computer's itunes transfered when I transfered the contents of the hard drive.  Now I'm trying to transfer music from my ipod and can't get all the files....help?

    Just got a new  computer and none of the music from my old computer's itunes transfered when I transfered the contents of the old hard drive.  Now I'm trying to transfer music from my ipod and can't get all the files....help please?

    The iphone is not a storage/backup device.
    It has always been very basic to always maintain a backup copy of your computer for this very occasion.
    Have you failed to do this?
    If so, not good, then you can transfer itunes purchases:  File>Devices>Transfer Purchases
    You may be able to purchase a third partyn program to get the rest ( not supported by Apple)

Maybe you are looking for

  • Need help with network user accounts on Mac server App on Yosemite, any tips?

    I've been trying to set up a small network with the Server app on Yosemite. I don't want to do anything crazy with the server, I'd just like to know how I can set up network user accounts so that they can login from other Mac computers on the same ne

  • "Memory full." error while exporting report to PDF format - CR2008SP2

    <br> Hello,<br> <br> I am developing a C#.NET application that uses the CR2008 SP2 .NET libraries. This application performs some database updates and uses CR2008 SP2 to run 7 different reports and export the results to PDF files. This application is

  • Some questions on RMAN and others

    hi, I have some doubts and need some clarifications to clear my doubts......thanks in advance can data be copied from one db say A to another db say B, if A is running on Windows 32bit OS and db B is on Solaris 64bit can I have a primary db on 10.2.0

  • I can't export my project in Final Cut Pro X

    Hey Troops. So after buying my new powerbook few months back finally have had a chance to use Final Cut Pro X. After completing my project, I went into 'FILE' clicked on 'SHARE' just see all my options greyed out. I checked to see if I needed an upda

  • IPhone 3gs won't update to ios 5.1.1 PLEASE HELP!

    I got an iPhone 3GS from a friend thats running 4.3.3 and when i try to update it to 5.1.1 it says "isnt compatible with this build" or something like that. Also its jail broken (updating issue also happened before it was jailbroken) and everytime i