:-( Same thread in several forum // Post title not explicit !

Hi forum users,
Please, do not post several times your question.
Please, put an explicit title !
( Please refer to the chart // rules )
Regards,
Erwan

I'm agree with u
Max

Similar Messages

How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?

Hello,
i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
Any idea?
Thanks for your help!

Hmmm....
How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
"Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
Not sure on the above.
Please correct me if this is wrong!
Ben
Message Edited by Ben on 07-19-2007 08:26 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Java Discussion Forum - Post topic not working

I've deployed the Java Discussion Forum contributed by CLAURENT in Knowledge Exchange. Deployed to 10gAS in JDev 9051. I've modified a few deprecated classes and made the appropraite changes to orion-applications.xml to point to the correct JPDK jars when deployed under Linux.
The application is operating properly with no errors. The administartion portlet can modify and create new forums. However, Posting a topic does NOT work. And it doesn't throw any errors on screen or in the console log (application.log) or the log4j log (forumprovider.log). Has anyone run into a problem like this?
Thanks. LEH

I have exactly the same problem on the Portal 10g release 2.
Normally the "dit of a new topic" calls the EditPostAction but after submitting the form, nothing reachs this action.
I check this in debug mode and add several logs and I don't see nothing appearing for this action.
Did you find a solution?

How do you add a signature to your forum posts?

How do you add a signature to your forum posts? I went here, but no information available on "how" to set up a signature.
http://forum.verizon.com/t5/Terms-of-Service-and-User/Verizon-Community-Signature-Guidelines/m-p/212...
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Solved!
Go to Solution.

My Settings (to the right of where your name appears under the forum post title) -> Personal Profile -> Personal Information
You need to be at least a "Copper" contributor before you gain this priveledge as it explained here:
http://forums.verizon.com/t5/Community-Announcements/Verizon-Community-Ranking-System/m-p/21291

In OSB 10,3, a Java Callout runs in the same thread of the Proxy Service?

Hello,
a I have a Java Callout within the Proxy Service, request pipeline.
Does it runs in the same thread of the Proxy?
If NOT,
which work manager is the Java Callout pinned to?
can I set the work manager I want?
Thank you,
regards
F.Costa

Thanks a lot.
Pointer to great info.
However doesn't mention Java Callout threading, nor the documentation does.
Anybody with a YES or NO, please...
F.Costa

Forum Posts Reset

Seems like a bug. The Top Users in Forum for Forum: SQLJ/JDBC is not updated.
Posts by dvohra should list 14 posts, but lists 5 posts.
http://forums.oracle.com/forums/forum.jspa?forumID=99
The Forums Post-Upgrade Problems ONLY is read-only.
Also, the posts have been reset post-upgrade. Shouldn't the previous posts be available?
Edited by: dvohra on Nov 25, 2008 5:06 PM
Edited by: dvohra on Nov 25, 2008 5:10 PM
Edited by: dvohra on Nov 25, 2008 5:10 PM
Edited by: dvohra on Nov 25, 2008 5:11 PM
Edited by: dvohra on Nov 27, 2008 2:59 PM

Thanks Timo for the clarification. The earlier posts do get listed in Forum Search.
The earlier or latter forum posts do not get listed with Google Search. For example, a search for "SQL Server 2005 datasource" on the Forum lists some posts, but
search on Google with "SQL Server 2005 datasource " does not list any of the forum posts. Pre-upgrade Google search would list Oracle forum posts.
Also, "Search for all user messages" does not list the pre-upgrade posts.
Edited by: dvohra on Nov 26, 2008 12:38 PM
Edited by: dvohra on Nov 26, 2008 12:41 PM

How does User get Identified by Screen Name and NOT by Real Name in submitting a Forum Post?

I have noticed that when I post a question or discussion item to one of Adobe's Forum Communities, I am identified as the author of my post by my actual legal name, not by my Screen Name that I set up in my profile when I registered. The same applies for the posts of others--they are identified by their legal names, not their screen names. What is the purpose of the Screen Name we set up when we registered, if not to shield the identity of the individual from others reading the post, if that person does not want to have their true identity publicly disclosed in, or publicly associated with the post? If I sign my post using my Screen Name, but then it is identified with my legal name when I post it, what good does it do to have a Screen Name? Is there some way to have the software not use my legal name, but identify my posts by my Screen Name only, if I so choose that option? (Of course, Administrators at Adobe can always (presumably) identify the (real name) author of the post, via the registration information associated with a Screen Name, should the need arise.)
Sincerely,
SpaceAdventurer

Thanks for the reply, mytaxsite.co.uk. And thanks for the screenshot showing me that my name is displayed to you as "spaceadventurer," which is what I had intended / wanted.
I understand now, from reading through most of the original and replies to the post,Real name instead of Screen name displayed, where I noticed you replied several times, that the Screen Name / real legal name works this way on Adobe’s forums:
When you are logged in - YOU (and only you) see your real legal name everywhere on the forums / web site, and associated with all of your posts
When you are not logged in (to Adobe / forums with your Adobe username / password), you always see your name associated with your posts as your Screen Name only
Everyone else always sees your screen name, everywhere, on all posts, regardless of whether they (everyone else) are logged in or logged out. (Unless, of course, you set up your profile to have your Screen Name be your real legal name. Then everyone will always see your real legal name associated with your posts.)
When logged in, in the “Edit Communities Profile” web page (from the menu that appears when you click your Avatar in the black Adobe menu bar at the top of the screen), in the “Privacy” tab on that page, there is a “widget” called ‘Preview your profile’ in the upper right-hand corner of that tab. This widget is supposed to show you how you or others, depending on which selection you make from the dropdown in the widget, will see your Profile (and therefore, your name) from their computers. In fact, no matter which selection you make from the dropdown, the display of your profile that is produced ALWAYS shows your real legal name, which is misleading, because that is not in fact, what others will see. Others, whether “Registered Users,” “Friends,” or “Everyone,” will ALWAYS see your Screen Name only. (Except for the exception I mentioned in the immediate previous bullet.)
There is a way to change your Screen Name, should you feel the need to do so. The steps to do that are detailed in response no. 75 to the "Real name instead of Screen name displayed" forum post.
Does it sound to you like I have captured the gist of the main learnings that can be gleaned from that post ("Real name instead of Screen name displayed”)?
Thanks,
SpaceAdventurer

Not notified on forum posts

ITSG not notifying of new posts for a few day via email and RSS. Posts to threads more than 2 days old appear to be working correctly.
Forum filters do not appear to be working at all. Filtering on anything causes most posts to disappear from listing.
¯\_(ツ)_/¯

Based on this post, things are working
for you again now?
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Cannot reply to forum post without being registered; but can't register without creating a new thread

I wished to reply to a forum post with new information that will be of relevance to anyone searching for a solution to a particular problem. I did not have a support account with Mozilla. I found that the site would not allow a reply from an unregistered person. Fair enough, but it gives you no way to create an account then reply to the post. The only way you can create an account is by creating a new thread - which is what I am doing now! Crazy or what? It then took about 10 minutes thrashing about on the site to find out how to create an account. Frustrating or what? Thank goodness Firefox itself is built to much higher standards.

Suggested fix for an admin to apply:
Replace the text that appears at the bottom of a thread while signed out - "You must log in to your account to reply to posts. Please start a new question, if you do not have an account yet."
...with one that reads "You must log in to your account to reply to posts. Please [https://support.mozilla.org/get-involved sign up to contribute], or start a new question, if you do not have an account yet."
This little seeming catch-22 gave me a chuckle, but I'm glad this thread was already here so that I didn't have to waste space. Someone needs to fix this soon though, lest it put more people off contributing.

How would I know if any one post a thread in the Forum

Hi All,
Please tell me how would I know if any body post a thread in the forum??
Regards
krishhna

Hi,
I just read the "Suggestions and comments" forum and I found out that you did create a thread called "How would I know if any one post a thread in the Forum ".... So I knew that some one had posted a thread in the forum...
Regards,
Oliivier

Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.

The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

PROBLEM SOLVED!
I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2!

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

Stock Posting does not tally with Journal Entry

Hi Mentors,
I currently trying to see the cause of a particular issue with the JE being created by Stock Posting.
After scavenging the forums, I came across SAP Note 1525960.
Symptom
On creating Inventory Posting in locked Posting Period, system gives error message 'Period is
locked for new data [Message 131-107]'. Keep the window open, go to Posting Periods to
change the Period Status to 'Unlocked', and then click on 'Reconcile' again. Inventory Posting
is successfully added.
The Transaction Value in the Inventory Audit Report is correct. However the Debit / Credit
amounts in the Journal Entry of Inventory Posting are doubled.
The note was created in 2010, filed under SAP Business One 2007. I tried to replicate it, and it holds true for our system, which is currently 2004B.
When I tried to explain the SAP note to our accountant, she said that she did not encounter the error message, since she was the one controlling the period.
So my question is, if there any other factors that could influence the change in the posting of the JE such that the variance being posted in the JE is more than the actual amount(as verified against "Inventory Posting List" and OINM)?
Some facts about our Finance department's practices.
They enter the "Stock Posting" a month later.
E.G. Stock Posting for Oct2011 Stock Variance
System Date: Nov 16, 2011
Stock Posting - Posting Date: Oct 31, 2011
Thanks in advance!
Sean

Hi Sir Gordon,
I already checked using your suggested query:
SELECT * from oinm
WHERE NegInvAdjs != 0
found in this [thread|Re: Diffe Amount posting in Same document].
Unfortunately, 2004B does not have the column "NegInvAdjs". The query failed to execute.
Thank you for the guidance,
Sean

How can I use the same thread pool implementation for different tasks?

Dear java programmers,
I have written a class which submits Callable tasks to a thread pool while illustrating the progress of the overall procedure in a JFrame with a progress bar and text area. I want to use this class for several applications in which the process and consequently the Callable object varies. I simplified my code and looks like this:
        threadPoolSize = 4;
        String[] chainArray = predock.PrepareDockEnvironment();
        int chainArrayLength = chainArray.length;
        String score = "null";
        ExecutorService executor = Executors.newFixedThreadPool(threadPoolSize);
        CompletionService<String> referee = new ExecutorCompletionService<String>(executor);
        for (int i = 0; i < threadPoolSize - 1; i++) {
            System.out.println("Submiting new thread for chain " + chainArray);
referee.submit(new Parser(chainArray[i]));
for (int chainIndex = threadPoolSize; chainIndex < chainArrayLength; chainIndex++) {
try {
System.out.println("Submiting new thread for chain " + chainArray[chainIndex]);
referee.submit(new Parser(chainArray[i]));
score = referee.poll(10, TimeUnit.MINUTES).get();
System.out.println("The next score is " + score);
executor.shutdown();
int index = chainArrayLength - threadPoolSize;
score = "null";
while (!executor.isTerminated()) {
score = referee.poll(10, TimeUnit.MINUTES).get();
System.out.println("The next score is " + score);
index++;
My question is how can I replace Parser object with something changeable, so that I can set it accordingly whenever I call this method to conduct a different task?
thanks,
Tom

OK lets's start from the beginning with more details. I have that class called ProgressGUI which opens a small window with 2 buttons ("start" and "stop"), a progress bar and a text area. It also implements a thread pool to conducts the analysis of multiple files.
My main GUI, which is much bigger that the latter, is in a class named GUI. There are 3 types of operations which implement the thread pool, each one encapsulated in a different class (SMAP, Dock, EP). The user can set the necessary parameters and when clicking on a button, opens the ProgressGUI window which depicts the progress of the respective operation at each time step.
The code I posted is taken from ProgressGui.class and at the moment, in order to conduct one of the supported operations, I replace "new Parser(chainArray)" with either "new SMAP(chainArray[i])", "new Dock(chainArray[i])", "new EP(chainArray[i])". It would be redundant to have exactly the same thread pool implementation (shown in my first post) written 3 different times, when the only thing that needs to be changed is "new Parser(chainArray[i])".
What I though at first was defining an abstract method named MainOperation and replace "new Parser(chainArray[i])" with:
new Callable() {
public void call() {
    MainOperation();
});For instance when one wants to use SMAP.class, he would initialize MainOperation as:
public abstract String MainOperation(){
    return new SMAP(chainArray));
That's the most reasonable explanation I can give, but apparently an abstract method cannot be called anywhere else in the abstract class (ProgressGUI.class in my case).
Firstly it should be Callable not Runnable.Can you explain why? You are just running a method and ignoring any result or exception. However, it makes little difference.ExecutorCompletionService takes Future objects as input, that's why it should be Callable and not Runnable. The returned value is a score (String).
Secondly how can I change that runMyNewMethod() on demand, can I do it by defining it as abstract?How do you want to determine which method to run?The user will click on the appropriate button and the GUI will initialize (perhaps implicitly) the body of the abstract method MainOperation accordingly. Don't worry about that, this is not the point.
Edited by: tevang2 on Dec 28, 2008 7:18 AM

:-( Same thread in several forum // Post title not explicit !

Similar Messages

Maybe you are looking for