Same, unwanted old Safari page loading for months

iPad 3, 7.1.2. Private browsing. History and cookies/cache cleared after every session. Not using any other device that talks to this iPad. Connected via wifi.
Problem: On Safari launch, the same page either flash appears or stays on til something else is selected. Also the same page appears after opening a mail link URL. The page appears only some of the time and has been appearing for at least six months. Part of its URL is videos.android...
Question: how to stop this?
Thanks in advance...

Hi and Welcome to Apple Discussions
Some routers are better than others on a Mac. It's all about the firmware and the degree of compatibility built into it by the developer. Make sure you have the latest Netgear firmware installed on the router. Check the support page on Netgear's site.
Also, in the Netgear Router preference panel, add these DNS server codes, which may facilitate the page loading on the Mac - 208.67.220.220 and 208.67.222.222. There are OpenDNS codes, which have been shown to be much more efficient for Safari than those used by Internet Providers.

Similar Messages

  • Safari page load problems and 10.5.3

    Since I have upgraded to 10.5.3, I am experiencing Safari page load problems on all my user accounts on my 2.0 GHz Core Duo Black MacBook. I have reviewed threads in this forum and that of the Safari forum with no solution that solves the problem. so I post here in hopes of additional expert solution ideas.
    *The Problem:* Since upgrading to 10.5.3 Safari fails to complete page downloads for some, but not all websites. When these same websites are accessed with Firefox there is no problem. With Safari the page load will stop at about 75% completion, or the page will not load at all.
    Here is an example of a webpage that will not complete: http://www.realclearpolitics.com/
    Here is an example of a webpage that will not load at all: http://cherylsguitar.com/site (my wife's business)
    I also have a G4 iMac running 10.4.11 on the same WiFi network that does NOT experience the Safari page load problems. All is good and speedy on this trusty machine.
    *Solutions Attempted:*
    - Deleted plist (with no effect)
    - Re-installed Safari from Leopard disk (with no effect)
    - Scoured User Preferences in Library for offending applications, plug-ins, etc.
    - Reset PRAM
    - Reset and examined cable modem and router (AirPort Extreme 802.11g)
    *Hardware and Network info:*
    - 2.0 GHz Core Duo Black MacBook
    - 2 GB Ram
    - AirPort Extreme Base Station (generation 1) running 802.11g

    Allan Eckert wrote:
    Hi Perry Lehman;
    Have you cleared out your cookies?
    Allan
    Allan,
    Yes. I have reset Safari clearing all but website icons with no effect. I also tried turning of the Safari pop-up blocker with some very limited success. Disabling pop-up blocker will marginally help page load speed for some websites, but others still fail to load at all.
    Thanks for taking time to post.

  • IPad safari page load hang

    ok folks.  Long time listener, first time caller.  I've been using the forums for years to research and occasionally even solve ( ;-) ) problems with various and sundry things apple.  My turn.
    I have an iPad mini I got as a birthday present in 2013 (a "mini-pad" as my wife refers to it, late 2012, 16GB, wi-fi only).  I love it, got no major problems with it.  However...
    Throughout the mini-pad's life, using iOS 6, 7, and now 8, I have had the problem where web pages in Safari would hang while loading.  Not crash.  Just.  Stop.  It doesn't matter if I type in the URL or select it from a bookmark.  It doesn't matter if I'm running in regular or private mpode.  It doesn't matter if I'm on my wi-fi or somebody else's.  I've changed wi-fi routers over this time - no diff.  I've moved and changed ISPs (no, not to solve this problem) - no diff.  I've task-managered out of all programs and rebooted.  No diff.  Still the problem persists.  The page starts loading and stalls.  It may or may not continue loading if I gave it enough time, but if it's been longer than 10 seconds with no signs of progress I've found that there's no reason to wait longer.  Yes, I have no patience.  Canceling the load and reloading works...mostly (mostly).  Sometimes it takes 2 or 3 tries, but eventually the page will load.  Mostly.  Other, non-iOS devices on the SAME FRAKKIN NETWORK can load the exact SAME FRAKKIN PAGES with no issue whatsoever.  It's not always the same page with the issue.  Some nights it's page X, sometimes Y, sometimes, X, Y, Z, and points beyond.  I've moved to some other device to load the SAME PAGE and invariably it works just hunky dunky.  ****, I've even changed my DNS settings on the mini-pad and both of my routers.  No. Diff.
    A sample of the "other devices" - MacBook Pro OSX 10.7 Safari, Firefox, and Chrome; Windows 7 laptop; windows 7 desktop; MacBook Air OSX 10.9 Safari and Chrome.  Some of those are running a browser with AdBlock or other addons to reduce the amount of cruft loaded for each page.
    Background:  I'm not an idiot or a some found-it-in-a-forum hack.  I've been developing software for 30+ years.  I've built and repaired hardaware many of you haven't heard of, configured routers, decoded binary file formats, debugged modem connection strings, designed complex software, and forgotten more languages than most of today's green-ear grads have ever heard of.  I work equally adeptly in a 'doze, *nix, OSX, GUI, command line, with mouse, without mouse.  But this MF has me stumped.
    No, I'm not going to jailbreak.  Pleas don't start.  I'm not morally opposed to it, but IMO it ain't worth the effort.  Work within the system, boyos (and girlos)
    ***, mates?  any ideas?  Is it the lack of adBlock on the mini-pad? Or something else I've simply got blinders about and I'm 100% missing?
    mucho appreciato kids.

    Well if nothing else, reading your post was entertaining to me. Thanks. I appreciate it.
    Can I assume that you tried the basics ... resetting network settings, resetting all settings, clearing Safari...?
    I was trying to help my niece with a similar issue just like yours where Safari would hang and hang and take forever to load a web page. Quite by accident, I found that she had some bizarre website listed in her WiFi settings. When I tapped on the Info circle next to her WiFi network name, there was a website at the bottom of the screen under the proxy settings and I had never seen anything like that before. I had no clue what it was, but I took a shot and deleted it. As soon as I did, Safari started working normally again.
    BTW.... Discussion of jailbreaking or suggesting that as an alternative will get your comments booted from this support forum as Apple does not appreciate their iOS being hacked, so nobody here is likely to suggest that to you. That would also void your warranty and open your device up to all sorts of other ugly problems.

  • Safari doesnt load for all user accounts.

    Hi all. I have a PC with Windows Vista. I have three user accounts, myself and my 2 children. Safari will work fine as iternet browser on my account, but will not open net page on either of the other accounts. Internet explorer works fine on all 3 accounts but Safari wont load pages for the childrens accounts. This has only happened recently, but im not sure if my children have done any updates. I uninstalled Safari and reinstalled, but no improvement at all.
    Can anyone help please?.

    1. Open a Finder window.
    2. Press Command-F.
    3. Under the toolbar, click on the button that says "This Computer" next to the word "Search:" so that it says "Search: This Computer". "This Computer" is probably the second option after a button for your User Name.
    4. Type "Safari.app" without the quotes. It should show up and start searching. If it doesn't, find the text field to the right of the screen, type "Safari.app" without the quotes, and wait a while.
    5. Select the most reasonable option (if there is more than one, you can double-click to open each until you find the right one).
    6. Look at the bottom of the screen. It should tell you where the file is. For it to work properly, it should be in "Macintosh HD\Applications\" or simply "\Applications". If it isn't, move it there.
    Alternatively, just redownload Safari from Apple's website and install it into the correct folder. When prompted, select Macintosh HD from the list of install locations and wait for it to install. Hope this helps!

  • Old JSP pages loading // how to get new ones?

    I am new to the forum and hope that experts can help. I am running a JSP application on an Apache/tomcat setup.
    I encounter the problem that although I update a webpage (say 'example.jsp') with a date of 12 Jan 2009, the server continues to use a version of the page from many days before.
    Miscellaneous point: these pages are being accessed by jsp:include and jsp:forward.
    It seems like there is a hidden cache somewhere that the server likes to use in place of my updated pages.
    I'd be pleased for any solutions!

    Thanks everyone for the very helpful replies.
    There were a total of 4 problem files.
    Here are the results based on the suggestions received:
    1. The suggestion of deletion of the .java and .class files (to be regenerated automatically from the .jsp files) fixed 3 of the problems: " Occasionally, we get one that just wont recompile and I have to delete it from the work directory. A JSP is turned into a .java file and then compiled in to a .class file in this directory. Deleting it will cause the file to recompile. [tomcat home]/work/catalina/localhost/[war directory name]/org/apache/[path to the file]." I was a bit wary to delete the entire directory, but I went for it, and everything (including the numerous subdirectories) was automatically regenerated.
    2. There was still 1 problem file. I think that this file was somehow in the RAM of tomcat because the suggestion to shut everything down and restart took care of this last file: "Along with webapps folder in tomcat, there is a work folder. Open work.catalina.localhost. In localhost, you will find your application. Delete it. Deleting it will not cause any problem. Now again restart tomcat. Now you should get the new pages loaded."
    3. The following suggestion seems to be a very good one for my application (i.e., low traffic on a specialized site) that could prevent similar problems in the future: "If this is for development only and you´re using Tomcat, consider to set <context reloadable="true">. This will check for changes in the webapps folder at certain intervals and automagically redeploy/reload the changes. Don´t use this setting in production, it´s fairly expensive to let it check the webapps everytime. For other appservers, consult the appserver specific documentation for similar settings."
    Coming to this community was a very good idea with lots of excellent suggestions that fixed my problem! I had been frustrated by this for some months now. Thanks everyone!

  • Safari Page Loaded

    I've read others here and have tried the
    "do JavaScript "document.readyState" in document 1" loop.
    The problem is I get a complete return before the page is done. I seem to get it when the connection is made not when the page is completely loaded,
    I'm not up on Java or html but I think it uses a "Active Server Page". It has .aspx? followed by a long line of key numbers.
    Is there a way or different term other than "complete' for the line of java that will make it wait until the page is done. Delay in the script just won't work as the page may take a couple to many seconds to load.
    Any help is greatly appreciated.
    Marshall

    I use this arrangement:
    in the main script - to pause until the page is loaded:
    If my page_loaded(50) ...
    and then the subroutine:
    on pageloaded(timeoutvalue)
    delay 5
    tell application "Safari"
    repeat with i from 1 to the timeout_value
    If (do Javascript "document.readyState"in document 1) is "complete" then return true
    delay 1
    end repeat
    end tell
    return false
    end page_loaded
    This works most of the time, but I have observed problems when my PowerBook is overloaded - or there's heavy network activity - when it seems that the document readystate tests true halfway thru the actual page load. This is for no apparent reason other than these loads and almost seems as though Safari might be 'giving up' and changing the readystate precipitately! You could try testing for "loaded" as well to see if that helps.

  • I have dial-up, and when I delete my browser history, the facebook games refuse to load for MONTHS until magically one day, they decide to open again. How can I make them load right away?

    I am using a gateway laptop, and Windows 7. I use Netzero as my dialup service, using my phone line. I deleted my browser history and cookies, but I left all passwords intact. Whenever I do this, the games on Facebook come up with a LOADING bar, but they hit 100 percent and never actually load. It does this for months, and one day, they magically (Without me changing any settings) decide to load when I click on them. How do I make the games load, and prevent this from happening every time I clear the history?

    I am using a gateway laptop, and Windows 7. I use Netzero as my dialup service, using my phone line. I deleted my browser history and cookies, but I left all passwords intact. Whenever I do this, the games on Facebook come up with a LOADING bar, but they hit 100 percent and never actually load. It does this for months, and one day, they magically (Without me changing any settings) decide to load when I click on them. How do I make the games load, and prevent this from happening every time I clear the history?

  • Nokia mail inbox not loading for months

    My Nokia mail account has not been loading into my inbox for months....everytime I try loading it say try loading again ..this happens when I try it with my phone ,PC ...i can't get into my inbox ever

    Nokia Account » Nokia Services » Nokia Mail: Does this work? Then, we can look into your original issue: Which phone model and which desktop operating-system do you use?

  • Safari pages load don't display in mountain lion

    Since upgrading to Mountain Lion on my 2011 Mac Mini Safari loads the pages however there is nothing visable on the display except for white screen. I have to browse now using Google Chrome. I disabled all extensions and restarted many times with the same results.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Mavericks Reboot, and Safari Page Loading Errors

    I've had my iMac (21.5" 3.06 i3) for about 3 years running just great.  Never an unexpected reboot or any problems related to web browsing with Safari.  I upgrade the software to Mavericks when it was released.
    Now the problems have set in.  Daily, Safari gives me a warning that it had to re-launch a web site because it failed to load properly (a first its ever done that).  There is no reson or consistancy with the pages/sites that it dose this on.  And worse yet, within the last two weeks or so...the iMac just shuts down, and reboots (PC Blue Screen of Death) syndrome.  And now this is becoming repeat offence.
    I have Avast as an anti virus and completed full scans, nothing seems to be the problem there.
    So is anyone else having issues with these two problems as they most likely are related to Mavericks...at least thats the only thing thats changed since the problems have appeared.
    Any thoughts?

    Avast is the problem.
    Uninstall Avast >  How to completely uninstall avast! Free Antivirus from a PC or Mac | How to | Softonic
    Enable Gatekeeper to prevent malware.
    Open System Preferences > Security & Privacy then select the General tab.
    Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
    OS X: About Gatekeeper
    I have Avast as an anti virus and completed full scans
    There's nothing to scan.

  • Returning to old Safari pages

    I save an Internet Explorer web page to the desk top.
    I log off and shut down the computer.
    Later when I log onto the internet with Explorer I can easily find that web page again by double clicking its desktop icon.
    Safari doesn’t let me do this. It can save a web page as an html desktop file but clicking its icon later gets me nowhere. The file name begins with
    file:///Users/.....
    Safari doesn’t accept this as a URL and announces ‘it can’t find the server’.
    Is there a way around this, other than bookmarking the page?

    Jack,
    According to Aaron Wyatt:
    If you want to save a link to the page as a file, just drag the icon next to the URL in the location bar to the finder. A file with an "@" icon should be created and double clicking it will bring back to the original URL.
    This sounds exactly like what you want to do. You say: "... It would be much easier to doubleclick that file in its folder and be immediately logged onto its update ..."
    The way I interpret it is that you want basically an icon you can click on (just like any other file) that contains a URL to the page you want.
    Or, you may want to save the page as it is at the time of viewing, to avoid seeing the updated version. Then you just click "Save As...". I did it with this page, and it saves all images and even the text I have typed in this field so far.
    Are either of these correct? If not, your response seems a bit confusing.
    Regards,
    Tim

  • How come my safari pages won't stay loaded?

    Safari page loads for 3-5 seconds then returns to either desktop or start-up page.

    See if the following help.  Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If you are on iOS 5 then turning off iCloud and multitasking gestures might also help

  • Safari blank page or loading for ages and then timeout!

    Hi, this is my first topic so please any reply would be much appreciated. I had a week holiday when my Mac was switched off. Before that I havent noticed any problem with it, everything was working fine and fast. I came back on the 1st, had some updates installed on the 2nd and since then I barely can search the web. The pages loading for ages, after that sometimes get info that Im not connected to the web or timeout or the server doesnt respond to that website. BUT my Skype is still fine I even had a two way video call and was perfectly working. 1st I thought it was Safari so I downloaded Mozzilla but I had the same issue with that. Sometimes Safari works ok for a while and then all of a sudden just try to go to another page from what I used and was ok and that new page just doesnt load. I emptied the cache, I reset Safari and after that my topsites never work again. Well not never but once I used something from there I will not be able to go back and use another one. Since the reset I cant even see all the icons in my TOPSites. This problem is killing me now, dont really now what to do, this is my first Mac and I bought it last october. Still have plenty to learn.
    My Safari version is 4.0.5.
    thanks

    HI and Welcome to Apple Discussions...
    Since you have already emptied the cache and reset Safari...
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. *Make sure Safari is NOT running in Rosetta.*
    

Web pages now include a small icon or 'favicon' which is visible in the addrMss bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
    If you still have problems with Safari, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
    Carolyn

  • Safari 5.0.3/SL 10.6.4: Safari crashes for months now & makes me crazy

    Hello friends of the mac,
    Safari makes me crazy. My system is quite stable, only Safari crashes regularly, for months now. Every day at least once or more often. Tried all usual procedures: permission repaired, harddisk OK, cache deleted etc. It goes on... Perhaps one good thing: it is always the same error message (relevant part follows).
    System OS 10.6.4, Safari 5.0.3. As my workflow includes Safari, help is very, very appreciated!
    Every recommendations are welcome, really.
    The crash logs contain always these parts "MDUpdate ... MDQueryCallback" etc.
    Process: Safari [18099]
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Identifier: com.apple.Safari
    Version: 5.0.3 (6533.19.4)
    Build Info: WebBrowser-75331904~2
    Code Type: X86-64 (Native)
    Parent Process: launchd [119]
    Date/Time: 2011-02-08 08:23:45.817 +0100
    OS Version: Mac OS X 10.6.4 (10F569)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x0000000130a7c698
    Crashed Thread: 9 Dispatch queue: Query work queue
    Thread 9 Crashed: Dispatch queue: Query work queue
    0 com.apple.Metadata 0x00007fff8876038a _MDUpdateResultInQuery + 681
    1 com.apple.Metadata 0x00007fff8875980b processUpdatesLocked + 756
    2 com.apple.Metadata 0x00007fff88759386 tryProcessUpdates + 331
    3 com.apple.Metadata 0x00007fff8875848b _MDQueryCallback + 322
    4 com.apple.Metadata 0x00007fff88758322 doQueryResultsCallback + 119
    5 com.apple.Metadata 0x00007fff887582a1 _XQueryResultsCallback + 191
    6 com.apple.Metadata 0x00007fff88757b77 MDSClientCallbacks_server + 106
    7 libSystem.B.dylib 0x00007fff8429d860 machmsg_serveronce + 378
    8 libSystem.B.dylib 0x00007fff84273873 dispatch_sourceinvoke + 273
    9 libSystem.B.dylib 0x00007fff84272c34 dispatch_queueinvoke + 185
    10 libSystem.B.dylib 0x00007fff84272d5c dispatch_queuedrain + 261
    11 libSystem.B.dylib 0x00007fff84272bb4 dispatch_queueinvoke + 57
    12 libSystem.B.dylib 0x00007fff8427275e dispatch_workerthread2 + 252
    13 libSystem.B.dylib 0x00007fff84272088 pthreadwqthread + 353
    14 libSystem.B.dylib 0x00007fff84271f25 start_wqthread + 13
    Message was edited by: stevie macfan

    Hi and welcome...
    OS Version: Mac OS X 10.6.4 (10F569)
    That's not the complete crash report but not having your system software up to date can cause Safari to crash. The most recent Snow Leopard version is v10.6.6.
    Click the Apple () menu (top left in your screen) Software Update ...
    Then repair permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
    If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Restart your Mac and try Safari. If Safari continues to crash, post the lastest crash report but this time include the "binary images" section.
    Safari crashes can also be due to third party Safari add-ons. Troubleshooting help here for that.
    http://support.apple.com/kb/TS3230?viewlocale=en_US
    Carolyn
    Message was edited by: Carolyn Samit

  • Safari -- Pages wont load

    Hello,
    We bought an iMac about a year ago, and it's been perfect. However, starting about yesterday, whenever I would try to load a page like ESPN, Safari would freeze up because the ads won't show up. This has happened on a lot of sites, and I can barely go on a site without it freezing up. I tried emptyin the cache, but that has made no difference. Can someone help me out? Thanks.

    My Safari page load hangs were being caused by long URLs being split across packets by Safari that were not liked by my new SonicWall firewall. Firefox does not seem to split long URLs across multiple packets, so Firefox works fine with Sonicwall. My temporary fix was to turn off the CFS Content Filtering Service to allow Safari to complete loading pages. The solution that allows turning CFS back on is outlined below.
    Examples of pages that were hanging were www.delta.com home page and even apple.com discussion boards. When I encountered a page that would not fully load (blue bar in URL would not fully complete), I click on the X in tool bar to cancel the loading page. Then choose Window>Activity. URLs that showed status "cancelled" were very long URLs, typically related to advertisements or metrics collection.
    The following document shows the "hidden" Sonicwall option change that fixed the problem for me.
    http://www.radiotope.com/content/safari-and-sonicwall

Maybe you are looking for

  • Exchange 2007 SP3 Install on 2008R2 Fails with "The data passed to a system call is too small"

    I'm installing Exchange 2007 SP3 onto Server 2008 R2. I have run this install in compatibility mode and in normal install mode with the same results. Error code 3221684346: The data area passed to a system call is too small. I am installing directly

  • New software is available - DISABLE

    I'm looking for some help regarding the New software is available tray notification. I am trying to configure this notification so it is only displayed when an application is specifically deployed as available to the client device. At the moment, the

  • Resizing/compresing images within a document

    Hi I am trying to compress all images within a document I've just creacted, in order to avoid having a 20Mb size document, but I cannot find the tool anywhere. I am just new to Pages, transfered from Office Word, where this task can easily be done by

  • Running apple hardware test, and taking over 15 minutes, normal?

    My MacBook pro won't start up, gerble wheel keeps going around for over 20 minutes, using "hardware test" disk now and it's been over 20 minutes again, with no completion... The progress bar is 7/8's done, but it's been in that spot way too long? Wha

  • Dynamic passing of the structure in LVC_FIELDCATALOG_MERGE

    Hi ABAP Gurus, I'am doing report to read cluster results My requirement is : The report uses LDB -PNP in the selection screen in addition to that Clusterid is passed and what ever cluster id we select for the pernr that cluSter id results has to show