Same vendor for procuring Goods and Services

Dear all,
Is it possible to procure goods and services (eg, freight services) from the same vendor?
If possible, are there any settings to be done in the vendor master or in the POs?
Thanks
Shankar

Hi,
You can procure material and service (Fright) charges from same vendor.
At the time of purchase order creation you can assign condition type for fright charges at item detail level >> Condition tab of purchase order.
After enter material detail go in condition tab and select condition type for fright charges.
Regards,
Mahesh Wagh

Similar Messages

Same vendor for Procurement and Services

Hi,
How to use the same vendor code for Both Procurement and External Services, to trigger different pricing procedures.
Please suggest.
Thanks in advance,
njs.

Hi,
Pricing procedure for Procurement depends on :
1. Schema Groups: Vendor
2. Schema Groups for Purchasing Organizations
System will look for the combination for both the schema group.
Pricing procedure for External service depends on :
1. Document category -- e.g. - RFQ , Pr or PO
2. Document type --- NB , UB
Regards,
Shailesh

What would be the % fee that india seller will have to pay if i send money for goods and service

how much would be the % fee that a seller in india will have to pay if i send money through goods and services they want me to add it on is it about 6%

Hello Sister! How are you? I found this link on how to install it, but i have not tried it. here it is: http://www.makaboy.net/procedures/installing-the-watchtower-library-onto-your-ap ple-ipod-iphone-ipad-and-other-platforms-using-isilo-and-meekspace/#axzz2VvgCqHz h
You can also make a link to the online Watchtower Library, just go to this link: wol.jw.org. Then click on the share button. Then Click add to home screen. Then type in what you want the link to be called (like Watchtower Library). Then click add. A link will then be on your home page. when you tap on it, it will take you right to the Watchtower Online Library (but you will need to be on the internet to go to the page)
Hope This Helps!
Mini Apple Genuis

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

Do I use the same password for apple ID and for iCloud?

I am not getting mail on my iphone or my ipad air!
When I put the password for my apple ID into icloud- it keeps reverting to another password. i.e. doesn't hold the apple ID password.
Is this a problem keeping the mail from getting to my phone and ipad?
DO I USE THE SAME PASSWORD FOR APPLE ID AND ICLOUD?
Help. and MERRY CHRISTMAS

What are you trying to do when you say "When I put the password for my apple ID into icloud- it keeps reverting to another password"?
Where are you doing when you try to enter your password?

I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Can I use the same itunes for my ipad and iphone? Will the computer erase my other device information?

Can I use the same itunes for my ipad and iphone on my computer? Will the computer erase my other device information?

The computer will not erase the information. Each device will show up in iTunes as a separate device and you can control the information for each device through iTunes.

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!

Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

How to use same form for Editing info and creating info.

Hi all,
Here my aim is to select the user from list and edit the user info. There is one more option to create the new user.
Currently I am using two separate input forms one for Editing and one more creating new user.
Can anyone tel me, how to use the same form for both editing and creating.
Thanks,
Ramesh Biradar

Hi Ramesh,
I'll make some assumptions about how you're going about this, and then give you a possible solution:
I assume that you have a table with selection on one page. To edit an item, you wish to select it's radio button and click an edit button to take you to another page with the item filled in to edit it. To create a new item, you'd like to click a "new" button and go to the same page.
If this is correct, here's the basic steps:
1). Assuming you have both the list and edit pages already created, make sure you have a JSF navigation case defined going from the list page to the edit page. I'll call this navigation case "goToEditPage" for this discussion.
2). To make the edit button, drag a command button from the component palette and drop it on the af:TableSelectOne (the column in your table containing the radio buttons for selection).
3). Set the action property on this command button to "goToEditPage".
4). Now, to make the create button, drag a command button from the component palette somewhere on the page. I like to put mine in a panelButtonBar inside the actions facet of an af:Page component.
5). Now, for the Action property of this command button, bind it to a method in your page's backing bean. The code will look something like this:
public String performNew()
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = bindings.getOperationBinding("Create");
    Object result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty())
      return null;
    return "goToEditPage";
}Hope this is helpful, Ramesh.
Regards,
John

[svn:fx-3.x] 13209: Adding same fix for SDK-23838 and SDK-24205 to 3. x from trunk.

Revision: 13209
Revision: 13209
Author:   [email protected]
Date:     2009-12-23 15:45:53 -0800 (Wed, 23 Dec 2009)
Log Message:
Adding same fix for SDK-23838 and SDK-24205 to 3.x from trunk.
The dropDown was not receiving changes to styles nor dataproviders. This was a result of not recreating the dropDown each time it was shown. I've changed the default of the flag for destroying the dropDown to be true. I've also modified the code to only not destroy the dropDown when it is showing or being shown. I?\226?\128?\153ve also moved some of the code in the animation handler to check for a null dropDown first before destroying it.
QE notes: No
Doc notes: No
Bugs: SDK-23838, SDK-24205
Reviewer: Jason
Tests run: checkintests, ComboBox
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23838
    http://bugs.adobe.com/jira/browse/SDK-24205
    http://bugs.adobe.com/jira/browse/SDK-23838
    http://bugs.adobe.com/jira/browse/SDK-24205
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/ComboBox.as

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

Vendors for e-workflow and Portal

Hi All,
I would like to know SAP partner vendors for e-Workflow and Portal.
Thanks.

I can't get the short URL to work within a workflow. There is something with the combination of letters and numbers and other characters that when the link gets created, it fails.
Short URL just comes from the Portal.
Refer to this link
http://scn.sap.com/thread/3615332
Kevin

I bought 2 same plan for Lightroom accidentally and need to terminate and cancel both of them,please help me

I bought 2 same plan for Lightroom accidentally and need to terminate and cancel both of them,please help me

Unfortunately, you will have to contact Adobe directly to do this sort of thing, with the best bet being by phone. They may, or may not, be willing to refund you your purchase cost.

Same vendor for procuring Goods and Services

Similar Messages

Maybe you are looking for