Sample Ageing Report in XL Reporter
Hi
Does anyone have a copy of a sample ageing report that has been created in XL reporter?
Hi,
Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
In case the question is still open:
I would recommend that you try these forums - which should fit better:
For SAP partners only there's a forum where you can discuss implementation questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
...or you might try your luck with SAP Support?
HTH
Similar Messages
-
(Invoice register Report – Payment Register report = Aging Report)
Hi,
The total balance for Invoice registers report “minus” the balance for Payment register report not give me the balance of Invoice aging report
The expected behavior:
It must minus the balance between the two reports equal to invoice aging report
(Invoice register Report – Payment Register report = Aging Report) But this not happen
What the issue causing for that ?
ThanksHello.
I think you cannot expect that calculation to be correct. Just to mention Payment Register, this report does not have a total in the functional currency.
The following excercise is true:
Ending Balance of Accounts Payable Trial Balance on period 1 + Posted Invoice Register on period2 - Posted Payment Register on period2 = Ending Balance of Accounts Payable Trial Balance on period 2
Octavio -
AR Aging 7 Bucket Summary Report Outstanding Amount Query
Hi All,
Please help me on below query,
I want to do a report based on AR Customer Outstanding Balance/Amount and it should tally with AR Aging 7 Bucket Summary Report Outstanding Amount.
7 Bucket Report used Parameters - (1000, 2025, ARXAGS, 50308, , Customer, C, B, 2013/03/19 00:00:00, Collections, SUMMARY, , , , , , , , , , , , NONE).
I tried my maximum, But some customers are tallying and some are not.
Please help me to write the query, to find the Customer Outstanding Balance which is tallying with Aging 7 Bucket Summary Report Outstanding Amount.
ThanksA UNION needs to have the same data types and number of columns in all of the SELECT statements. You added to the top half of the select, but not the bottom half. In your case it looks like there is a package generating dynamic SQL for the bottom half of the UNION. This code must be defined by a package:
&common_query_invYou will need to track down the package and see if you can determine what it is doing. Looks like you may have to copy this report if it is seeded, because you are not going to want to modify the seeded Oracle package. -
(Invoice aging report = Cash Requirement Report)
hi,
The total balance for cash requirement report for specific supplier not match with the balance for Invoice aging Report also for specific supplier
The expected behavior:
It must to match the balance between the two reports
(Invoice aging report = Cash Requirement Report)
But this not happen when I compare the balances between the report’s
Kindly , Advise .
ThanksHello.
The Invoice Aging Report shows unpaid invoices, which may be not due yet. Use the Cash Requirement Report to forecast your immediate cash needs for invoice payments.
Octavio -
Age-wise Material Stock Report
Dear Guru,
Any SAP standard report will show age-wise Material stock. Ex: IF i hv a X material in Stock, i want to know the how many days it was in production and how many days in finished stock like that.
<b>Any reports which are similar to Age-wise customer/vendor report which relates to material</b>
Regards,
VenkatHi,
Try T.Code MC50 and MC46.
Regards,
Sachendra Singh -
Request for sample reports developed using report designer
Hi All,
Request for sample reports developed using report designer.
ThanksRamesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel -
Pointers to Sample report for Interactive Reporting
Hi All,
Can any one provide me Pointers to Sample report for Interactive Reporting( which uses Hotspots, Hide, At-User Command).
Thanks in advance.
Regards,
Navin.Hi
see the sample report
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
<b>Reward points for useful Answers</b>
Regards
Anji -
How ro run a sample report in oracle9i reports?
Hi,
I just installed oracle9i release 2 (v9.0.2.0.1) and like to run a sample report. all the configurations are default (automatically configured when install). I found the server name rep_solaris03 in reports/conf. The port no is from the portlist of the mid_tier server.
There are some reports in ORACLE_HOME/reports/samples/demo and I used following URL to run it:
http://myserver.domain:1950/reports/samples/demo/rwservlet?scott/tiger@iasdb+report=test.rdf+server=rep_solaris03+destype=cache+desformat=pdf
but I get error "the page can't be displayed" . Could you help me to figure out what's wrong?
ThanksHi
First make sure the Report servlet and server are up and running. Try
http://hostname:port/reports and http://hostname:port/reports/rwservlet and
http://hostname:port/reports/rwservlet/showjobs?server=(name of server)
Make sure the port you are specifying is correct. Reports provide following ear file in iAS for demos:
reports_demo.ear - used in OC4J_Demos instance
They are under $ORACLE_HOME/reports/j2ee directory.Make sure OC4J_Demos instance is up and running.
Thanks
Rohit -
Calculate Age in an ABAP report
Hi all you wonderful SAP people,
I am trying to calculate age in my ABAP report,
Any function module I can use or code snippet? Your help is much appreciated. Points will be awarded.
Regards
RamoruaHi Mohamed, some characters (plus signs, and spaces around the minus) seem to have gotten lost from your code, maybe during the conversion of the forum. Also, the data type is i, not int.
Header 1
DATA: lv_age TYPE i.
lv_age = sy-datum(4) - lv_birthdate(4).
IF sy-datum+4(4) LT lv_birthdate+4(4).
lv_age = lv_age - 1. " or SUBTRACT 1 FROM lv_age.
ENDIF. -
Needed sample program for emailing the report output
hi all,
neede sample program for emailing the report outputHi,
Please refer this program for sending e-mail with attachment.
***INCLUDE ZHZLPP_CLZSN_DAILY_MIS_PRINT .
*& Form print
* text
* --> p1 text
* <-- p2 text
FORM print .
DATA: wa_output_options TYPE ssfcompop,
wa_control_parameters TYPE ssfctrlop,
t_otfdata TYPE ssfcrescl,
t_pdf_tab TYPE TABLE OF tline WITH HEADER LINE.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i.
DATA: w_bin_filesize TYPE i.
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
w_return TYPE ssfcrescl.
DATA : l_mean TYPE p DECIMALS 2,
l_mean1 TYPE p DECIMALS 2,
l_mean2 TYPE p DECIMALS 2,
l_mean3 TYPE p DECIMALS 4,
temp TYPE p DECIMALS 2,
v_header LIKE zmisdisp3-remark,
disp_d_kwh_mt TYPE zmisdisp5,
disp_m_kwh_mt TYPE zmisdisp5,
disp_d_mt_mw TYPE zmisdisp5,
disp_m_mt_mw TYPE zmisdisp5,
l_bptarget(16) TYPE p DECIMALS 2,
l_act_d(16) TYPE p DECIMALS 2,
l_act_c(16) TYPE p DECIMALS 2,
l_pow_gen TYPE p DECIMALS 2,
l_pow_gen_d TYPE p DECIMALS 2,
l_pow_gen_c TYPE p DECIMALS 2,
l_no_of_days TYPE p,
disp_bptarget TYPE zmisdisp5,
disp_act_d TYPE zmisdisp5,
disp_act_c TYPE zmisdisp5,
disp_d_kwh TYPE zmisdisp5,
disp_c_kwh TYPE zmisdisp5,
disp_d_mw TYPE zmisdisp5,
disp_c_mw TYPE zmisdisp5,
disp_pow_gen_d TYPE zmisdisp5,
disp_pow_gen_c TYPE zmisdisp5,
disp_pow_gen TYPE zmisdisp5,
disp_ftd_h1 TYPE zmisdisp5,
disp_ftd_h2 TYPE zmisdisp5,
disp_ftd_h3 TYPE zmisdisp5,
disp_ftd_h4 TYPE zmisdisp5,
disp_ftd_h5 TYPE zmisdisp5,
disp_ftd_o1 TYPE zmisdisp5,
disp_ftd_o2 TYPE zmisdisp5,
disp_ftd_o4 TYPE zmisdisp5,
disp_ftd_o5 TYPE zmisdisp5,
disp_***_o1 TYPE zmisdisp5,
disp_***_o2 TYPE zmisdisp5,
disp_***_o4 TYPE zmisdisp5,
disp_***_o5 TYPE zmisdisp5,
disp_cath_d TYPE zmisdisp5,
disp_cath_c TYPE zmisdisp5,
disp_anode_d TYPE zmisdisp5,
disp_anode_c TYPE zmisdisp5,
l_rec_con_d_kwh(16) TYPE p DECIMALS 2,
l_rec_con_c_kwh(16) TYPE p DECIMALS 2,
l_rec_con_d_mw(16) TYPE p DECIMALS 2,
l_rec_con_c_mw(16) TYPE p DECIMALS 2,
tot_kah TYPE p DECIMALS 2,
avg_kah TYPE p DECIMALS 2,
disp_tot_kah TYPE zmisdisp5,
disp_avg_kah TYPE zmisdisp5,
v_ftd_h1 TYPE p DECIMALS 2,
v_ftd_h2 TYPE p DECIMALS 2,
v_ftd_h3 TYPE p DECIMALS 2,
v_ftd_h4 TYPE p DECIMALS 2,
v_ftd_h5 TYPE p DECIMALS 2,
v_ftd_o1 TYPE p DECIMALS 2,
v_ftd_o2 TYPE p DECIMALS 2,
v_ftd_o4 TYPE p DECIMALS 2,
v_ftd_o5 TYPE p DECIMALS 2,
v_***_o1 TYPE p DECIMALS 2,
v_***_o2 TYPE p DECIMALS 2,
v_***_o4 TYPE p DECIMALS 2,
v_***_o5 TYPE p DECIMALS 2,
l_cdiff1 LIKE imrg-cdiff,
l_cdiff2 LIKE imrg-cdiff,
l_cdiff3 LIKE imrg-cdiff,
l_cdiff4 LIKE imrg-cdiff,
l_path LIKE rlgrap-filename,
l_flag.
DATA :prod_disp TYPE TABLE OF zmisdisp1 WITH HEADER LINE,
keyp_disp TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
keyp_dis1 TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
rmat_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
rcur_disp TYPE TABLE OF zmisdisp6 WITH HEADER LINE,
rhrs_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
brkd_disp TYPE TABLE OF zmisdisp7 WITH HEADER LINE.
DEFINE fill_kpp.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_disp-desc,
l_mean1 to keyp_disp-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean2 = v_mean_znshg.
move l_mean2 to keyp_disp-avg.
else.
move l_mean to keyp_disp-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_disp-unit.
else.
move it_mic_data-masseinhsw to keyp_disp-unit.
endif.
append keyp_disp.
clear keyp_disp.
move 'X' to l_flag.
else.
move : l_mean1 to keyp_disp-ftd.
append keyp_disp.
clear keyp_disp.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_disp-desc.
append keyp_disp.
clear keyp_disp.
endif.
END-OF-DEFINITION.
DEFINE fill_kp1.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_dis1-desc,
l_mean1 to keyp_dis1-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean3 = v_mean_znshg.
move l_mean3 to keyp_dis1-avg.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move l_mean to keyp_dis1-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_dis1-unit.
else.
move it_mic_data-masseinhsw to keyp_dis1-unit.
endif.
append keyp_dis1.
clear keyp_dis1.
move 'X' to l_flag.
else.
if it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move : l_mean1 to keyp_dis1-ftd.
endif.
append keyp_dis1.
clear keyp_dis1.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_dis1-desc.
append keyp_dis1.
clear keyp_dis1.
endif.
END-OF-DEFINITION.
*FIRST PAGE
********PLANT HEADER
MOVE 'CLZS HYDRO I PLANT - DAILY PRODUCTION REPORT' TO v_header.
********Production figure
LOOP AT it_disp1.
prod_disp-desc = it_disp1-desc.
prod_disp-d_plnmg = it_disp1-d_plnmg.
prod_disp-d_menge = it_disp1-d_menge.
prod_disp-u_plnmg = it_disp1-u_plnmg.
prod_disp-u_menge = it_disp1-u_menge.
prod_disp-avg = it_disp1-avg.
prod_disp-ask_rate = it_disp1-ask_rate.
prod_disp-m_plnmg = it_disp1-m_plnmg.
prod_disp-y_plnmg = it_disp1-y_plnmg.
prod_disp-y_menge = it_disp1-y_menge.
prod_disp-y_variance = it_disp1-y_variance.
APPEND prod_disp.
ENDLOOP.
********Key performance parameters
MOVE 'ROASTER :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN 45 DEG' ' S/S in Calcine'.
MOVE 'LEACHING :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN CAL' ' S/S in Calcine'.
fill_kpp '%water soluble Zn' ' W/S Zn in Jarosite Cake'.
fill_kpp '%total Zn in HBF' ' T/Zn in Jarosite cake'.
fill_kpp 'ZINC IN CT' ' Zn in Conditioning tank'.
fill_kpp 'g/l zn in neutral overflow' ' Zn in Electrolyte Prod (gpl)'.
fill_kpp 'PPM CU IN PS25' ' Purified Solution Cu'.
fill_kpp 'PPM CADMIUM IN PS25' ' Purified Solution Cd'.
fill_kpp 'PPM COBALT IN PS25' ' Purified Solution Co'.
MOVE 'CELLHOUSE :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp 'g/l zinc in cell feed' ' Cell Feed Zinc gpl'.
fill_kpp 'GPL ACID IN CELL FEED' ' Cell Feed acidity gpl'.
fill_kpp 'g/l manganese in cell feed' ' Cell Feed Mn gpl'.
LOOP AT t_imrg_add_disp.
MOVE: t_imrg_add_disp-desc TO keyp_disp-desc,
t_imrg_add_disp-d_value TO keyp_disp-ftd,
t_imrg_add_disp-c_value TO temp,
temp TO keyp_disp-avg.
IF t_imrg_add_disp-units = 'NO'.
MOVE: 'no' TO keyp_disp-unit.
ELSE.
MOVE: t_imrg_add_disp-units TO keyp_disp-unit.
ENDIF.
APPEND keyp_disp.CLEAR keyp_disp.
ENDLOOP.
fill_kp1 'Ingot Pb SHG Zinc' ' Ingot Pb SHG Zinc'.
fill_kp1 'Ingot Cu SHG Zinc' ' Ingot Cu SHG Zinc'.
fill_kp1 'Ingot Cd SHG Zinc' ' Ingot Cd SHG Zinc'.
fill_kp1 'Ingot Fe SHG Zinc' ' Ingot Fe SHG Zinc'.
fill_kp1 'Ingot Zn SHG Zinc' ' Ingot Zn SHG Zinc'.
********Cellhouse power
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
v_m_kwh_mt = v_ind8_m / cathode_recipt.
v_m_mt_mw = cathode_recipt / ( v_ind8_m / 24000 ).
ENDCATCH.
MOVE : v_d_kwh_mt TO disp_d_kwh_mt,
v_m_kwh_mt TO disp_m_kwh_mt,
v_d_mt_mw TO disp_d_mt_mw,
v_m_mt_mw TO disp_m_mt_mw.
*SECOND PAGE
********Raw Material
LOOP AT it_disp3.
rmat_disp-desc = it_disp3-desc.
rmat_disp-opstk = it_disp3-opstk.
rmat_disp-d_recpt = it_disp3-d_recpt.
rmat_disp-u_recpt = it_disp3-u_recpt.
rmat_disp-d_cons = it_disp3-d_cons.
rmat_disp-u_cons = it_disp3-u_cons.
rmat_disp-clstk = it_disp3-clstk.
APPEND rmat_disp.
ENDLOOP.
********Work in Progress
********Finished Goods
********power consumption
l_no_of_days = v_mm_en_dt+6(2).
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
l_bptarget = ( v_bp_nrms_p * v_gross_d ) / l_no_of_days.
l_act_d = v_ind6_d + v_ind2_d - ( v_ind3_d + ( v_ind4_d / 2 ) ) - v_ind5_d.
l_act_c = v_ind6_m + v_ind2_m - ( v_ind3_m + ( v_ind4_m / 2 ) ) - v_ind5_m.
l_pow_gen = ( v_ind2_d / 1000 ) / v_ind7_d.
ENDCATCH.
l_pow_gen_d = v_ind2_d / 1000.
l_pow_gen_c = v_ind9_m / 1000.
l_rec_con_d_kwh = v_ind8_d.
l_rec_con_c_kwh = v_ind8_m.
l_rec_con_d_mw = v_ind8_d / 24000.
l_rec_con_c_mw = v_ind8_m / ( 24000 * v_days_pased ).
LOOP AT t_disp_curr.
rcur_disp-time = t_disp_curr-time.
rcur_disp-current = t_disp_curr-current.
rcur_disp-kah = t_disp_curr-kah.
APPEND rcur_disp.
AT LAST.
SUM.
tot_kah = t_disp_curr-kah.
ENDAT.
ENDLOOP.
avg_kah = tot_kah / '24'.
*********************running hrs
LOOP AT it_disp6.
rhrs_disp-desc = it_disp6-desc.
rhrs_disp-opstk = it_disp6-d_runhrs.
rhrs_disp-d_recpt = it_disp6-m_runhrs.
APPEND rhrs_disp.
ENDLOOP.
rhrs_disp-desc = 'Turbo Generator'.
rhrs_disp-opstk = v_turbod.
rhrs_disp-d_recpt = v_turboc.
INSERT rhrs_disp INDEX 2.
**********************BREAK_DOWN & OIL
CLEAR value.
LOOP AT itab2.
IF itab2-equnr = 'NMZ-EH01G001'.
PERFORM s_conversion_h.
v_ftd_h1 = v_ftd_h1 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01G002'.
PERFORM s_conversion_h.
v_ftd_h2 = v_ftd_h2 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V003'.
PERFORM s_conversion_h.
v_ftd_h3 = v_ftd_h3 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V001'.
PERFORM s_conversion_h.
v_ftd_h4 = v_ftd_h4 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V002'.
PERFORM s_conversion_h.
v_ftd_h5 = v_ftd_h5 + value.
CLEAR value.
ENDIF.
ENDLOOP.
LOOP AT t_oil.
AT END OF ind.
SUM.
IF t_oil-ind = 1.
v_***_o1 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 2.
v_***_o2 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 3.
v_***_o4 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 4.
v_***_o5 = t_oil-cdiff * 1000.
ENDIF.
ENDAT.
IF t_oil-idate = p_repdt.
IF t_oil-ind = 1.
l_cdiff1 = l_cdiff1 + t_oil-cdiff.
ELSEIF t_oil-ind = 2.
l_cdiff2 = l_cdiff2 + t_oil-cdiff.
ELSEIF t_oil-ind = 3.
l_cdiff3 = l_cdiff3 + t_oil-cdiff.
ELSEIF t_oil-ind = 4.
l_cdiff4 = l_cdiff4 + t_oil-cdiff.
ENDIF.
ENDIF.
ENDLOOP.
v_ftd_o1 = l_cdiff1 * 1000.
v_ftd_o2 = l_cdiff2 * 1000.
v_ftd_o4 = l_cdiff3 * 1000.
v_ftd_o5 = l_cdiff4 * 1000.
*********Breakdown details----3rd page
LOOP AT itab INTO wa.
CALL FUNCTION 'FLTP_CHAR_CONVERSION'
EXPORTING
decim = 0
expon = 0
input = wa-auszt
ivalu = 'X'
IMPORTING
flstr = wk_char_auszt.
CONDENSE wk_char_auszt NO-GAPS.
wk_flt_auszt = wk_char_auszt.
wk_flt_auszt = wk_flt_auszt / 3600.
duration = wk_flt_auszt.
brkd_disp-eqdesc = wa-eqktx.
brkd_disp-nodesc = wa-qmtxt.
brkd_disp-hrs = duration.
APPEND brkd_disp.
ENDLOOP.
MOVE : v_ftd_h1 TO disp_ftd_h1,
v_ftd_h2 TO disp_ftd_h2,
v_ftd_h3 TO disp_ftd_h3,
v_ftd_h4 TO disp_ftd_h4,
v_ftd_h5 TO disp_ftd_h5,
v_ftd_o1 TO disp_ftd_o1,
v_ftd_o2 TO disp_ftd_o2,
v_ftd_o4 TO disp_ftd_o4,
v_ftd_o5 TO disp_ftd_o5,
v_***_o1 TO disp_***_o1,
v_***_o2 TO disp_***_o2,
v_***_o4 TO disp_***_o4,
v_***_o5 TO disp_***_o5,
l_bptarget TO disp_bptarget,
l_act_d TO disp_act_d,
l_act_c TO disp_act_c,
l_rec_con_d_kwh TO disp_d_kwh,
l_rec_con_c_kwh TO disp_c_kwh,
l_rec_con_d_mw TO disp_d_mw,
l_rec_con_c_mw TO disp_c_mw,
tot_kah TO disp_tot_kah,
avg_kah TO disp_avg_kah,
l_pow_gen TO disp_pow_gen,
l_pow_gen_d TO disp_pow_gen_d,
l_pow_gen_c TO disp_pow_gen_c,
v_cath_d TO disp_cath_d,
v_cath_c TO disp_cath_c,
v_anode_d TO disp_anode_d,
v_anode_c TO disp_anode_c.
wa_output_options-tdimmed = 'X'.
wa_control_parameters-device = 'PRINTER'.
wa_control_parameters-preview = 'X'.
IF rb3 = 'X'.
wa_control_parameters-getotf = 'X'.
wa_control_parameters-no_dialog = 'X'.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = wa_control_parameters
output_options = wa_output_options
user_settings = 'X'
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = w_return " .
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE 'Error in printing form' TYPE 'I'.
ENDIF.
********Downloading in pdf format.
IF rb3 = 'X'.
IF l_usract <> 9.
MOVE fullpath TO l_path.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF' "
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = v_len_in
filename = l_path
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = i_tline
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc = 0.
MESSAGE 'File downloaded successfully' TYPE 'S'.
ENDIF.
ENDIF.
ENDIF.
IF sy-batch = 'X'. " SENDING MAILS IF SCHEDULED IN BACKGROUND
DATA: formname TYPE tdsfname,
fm_name TYPE rs38l_fnam,
control_parameters TYPE ssfctrlop,
output_options TYPE ssfcompop,
job_output_info TYPE ssfcrescl,
otf_data TYPE tsfotf.
DATA: otf TYPE TABLE OF itcoo WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
lines TYPE TABLE OF tline WITH HEADER LINE,
bin_filesize TYPE i.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = control_parameters
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = job_output_info
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
otf_data = job_output_info-otfdata[].
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = otf_data[]
doctab_archive = doctab_archive[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc = 0.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
* ----<<distrubution list>>----
PERFORM mail_users TABLES lines USING 'MIS-HY1A' v_header. " Donot put more than 8 email-ids
PERFORM mail_users TABLES lines USING 'MIS-HY1B' v_header. " in a distribution list
PERFORM mail_users TABLES lines USING 'MIS-HY1C' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1D' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1E' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1F' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1G' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1H' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1I' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1J' v_header.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " print
*& Form get_download_path
* text
* --> p1 text
* <-- p2 text
FORM get_download_path .
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
EXPORTING
window_title = 'Download as pdf file'
default_extension = 'pdf'
IMPORTING
fullpath = fullpath
user_action = l_usract.
IF l_usract = '9'.
STOP.
ENDIF.
ENDFORM. " get_download_path
*& Form mail_users
* text
* -->P_LINES text
* -->P_2153 text
* -->P_V_HEADER text
FORM mail_users TABLES p_lines STRUCTURE tline
USING p_dist_list
p_v_header.
CONSTANTS: c_raw TYPE so_obj_tp VALUE 'RAW',
c_pdf TYPE so_obj_tp VALUE 'PDF',
c_255 TYPE i VALUE 255,
c_134 TYPE i VALUE 134,
c_x TYPE c VALUE 'X'.
DATA: document_data LIKE sodocchgi1 ,
tab_lines TYPE i,
contents_txt TYPE TABLE OF solisti1 WITH HEADER LINE,
contents_bin TYPE TABLE OF solisti1 WITH HEADER LINE,
packing_list TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
object_header TYPE TABLE OF solisti1 WITH HEADER LINE,
receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
l_str(255) ,
v1 TYPE i,
v2 TYPE i,
v3 TYPE i.
document_data-obj_name = 'EMAIL'.
document_data-obj_descr = p_v_header. " SUBJECT LINE
CONCATENATE 'Please find the attached SAP generated Daily Production Report for the day'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
INTO contents_txt.
APPEND contents_txt.
CLEAR contents_txt.
APPEND contents_txt.
APPEND contents_txt.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( contents_txt ).
document_data-doc_size = tab_lines .
CLEAR packing_list-transf_bin.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_raw.
packing_list-doc_size = document_data-doc_size.
APPEND packing_list.
LOOP AT p_lines.
CLEAR l_str.
l_str+0(2) = p_lines-tdformat.
l_str+2(132) = p_lines-tdline.
v2 = v1 + c_134.
IF v2 LE c_255.
contents_bin-line+v1(c_134) = l_str. v1 = v2.
ELSE.
v3 = v2 - c_255.
v2 = c_255 - v1.
IF NOT v2 IS INITIAL.
contents_bin-line+v1(v2) = l_str+0(v2).
ENDIF.
APPEND contents_bin.
CLEAR contents_bin.
v1 = v3.
v3 = 134 - v1.
IF NOT v1 IS INITIAL.
contents_bin-line+0(v1) = l_str+v3(v1).
ENDIF.
ENDIF.
ENDLOOP.
APPEND contents_bin.
CLEAR contents_bin.
DESCRIBE TABLE contents_bin LINES tab_lines.
READ TABLE contents_bin INDEX tab_lines.
CONCATENATE 'Hy-I Report'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
'.pdf'
INTO object_header.
APPEND object_header.
packing_list-transf_bin = c_x.
packing_list-head_start = 1.
packing_list-head_num = 1.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_pdf.
packing_list-obj_name = 'text1'.
packing_list-obj_descr = 'Production report'.
packing_list-doc_size = tab_lines * 255 + STRLEN( contents_bin ).
APPEND packing_list.
receivers-receiver = p_dist_list.
receivers-rec_type = 'C'.
APPEND receivers.
CLEAR receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
put_in_outbox = ' '
SENDER_ADDRESS = 'CZPPPLG'
SENDER_ADDRESS_TYPE = 'B'
commit_work = 'X'
TABLES
packing_list = packing_list
object_header = object_header
contents_bin = contents_bin
contents_txt = contents_txt
receivers = receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " mail_users -
CR2008 Not enough memory while exporting reports from Crystal Reports 2008
I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
<sectionGroup name="businessObjects">
<sectionGroup name="crystalReports">
<section name="printControl" type="System.Configuration.NameValueSectionHandler" />
<section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
</sectionGroup>
</sectionGroup>
</configSections>
<businessObjects>
<crystalReports>
<printControl>
<add key="url" value="http://myserver/mysite/PrintControl.cab" />
</printControl>
<crystalReportViewer>
<add key="documentView" value="weblayout" />
</crystalReportViewer>
</crystalReports>
</businessObjects>
<appSettings>
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
<httpHandlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</httpHandlers>
<compilation debug="false">
<assemblies>
<add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</assemblies>
</system.web>
<system.webServer>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
</handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
Report.Close();
Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM -
Crystal report(Can i link sub report and main report Compulsorily) - invalid path
hi.
i need small clarification.
i am developing one Crystal report
main report i took it from rdr1 one table...
report is working fine..
Sub report i took it from inv1 one table.
i have not linked any fields from these tables.
May be it is having links in b1..
but in my other report both the tables.... from main report and sub report does not have any relation.
My Questions is..
Can i Compulsorily link fields to main report...
if both does not have any relation what should i do...
i took two tables.
main report rdr1
sub report inv1...
if i run the report it is asking two parameters one is for sub report and other one for main report working find in crystal report.
but...i want to run the report in b1.
while importing i am getting the error (Plz have a look on below image)
if i choose any other report it is importing fine...
Clearly i am mentioning i dont want to link both tables there is no links between two reports...
in this scenario can develop a report..
I need your Valuable suggestions.
here below u can find my developed sample report...
http://www.megafileupload.com/en/file/544758/NewReport-rpt.htmlhi.
If i try only i am getting the error..
out side if i run i am able to run the crystal report but
in b1 i am not able to import the report.
you can also try my report
from below link u can get my simple report.
if u find any mistake what i have done plz inform me..
http://megafileupload.com/en/file/544806/NewReport85-rpt.html -
Pre-Purchase Question - Deploying Crystal Report to SSRS Report Server
Our company has recently installed a SQL 2005 server for our accounting system. I had intended going down the path of using SQL Reporting Services as our reporting tool and deploying them to the builtin Report Server. However, I've been using Crystal Reports for years and find it much more user friendly for a non-programmer to use. I can actually write a report in Crystal, SSRS took me 3 days to achieve very little, I believe it requires too much SQL reporting knowledge for a beginner.
After spending many hours trawling the net looking for a solution to this problem, I found that Crystal comes as part of Visual Studio. However, I also believe the version of Visual Studio that comes with SQL2005 is the basic version, and I'd need the Pro version to get the Crystal add on.
To this end, I've downloaded the trial version of Crystal 2008 and installed it. I find I can write a report in Crystal, and then I can manually add that report to a SSRS project. When I open the Crystal Report within Visual Studio I can see all the correct Crystal toolbars and menus etc, so it would appear that the installation of Crystal for Visual Studio has integrated properly. I can then deploy that report to the Report server and see the report on the web page. However clicking to open the report then opens the full Crystal Reports application, instead of just displaying the report in the web page.
I've been unsuccessful in finding a solution to the above deployment problem. I'm seeking a solution so that my users can just see the report without Crystal itself opening up. I've been advised that there is a Crystal Report Server that I can purchase, but I don't wish to go to that expense when we already have this functionality built into our SSRS server.
Can you please advise if it's possible to deploy the Crystal report to the SSRS Report Server and then open the report within the web page without opening the full Crystal app, and if so what steps I would need to take to implement this.
If this issue can be resolved, I'll be more than happy to purchase the full Crystal 2008 package and forget SSRS as a bad idea.
Sorry to be so long winded, I wanted to be clear what the issue is. Any information /advice would be very much appreciated.Hello Diane,
I would not know if Crystal Report can be used with SSRS but I know for sure that you can use the embedded Crystal Reports Version with comes with VS 2005 or VS 2008 to create reports and to display them in web and windows application.
We have lots of samples how to do this in our [dev community|https://boc.sdn.sap.com/].
Also, you can use [Crystal Reports 2008|https://boc.sdn.sap.com/developer/library/CR2008SDK] with MS SQL 2005.
Other products like Crystal Reports server can also use MS SQL 2005.
Please see our [supported platforms for CR 2008|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000712280&_OBJECT=011000358700000675322008E] on windows.
Hope this helps
Falk -
SAP B1 Collection Report's crystal report layout printing format
Hi all,
We're having an issue in Crystal Report fro SAP Business One - for the Collection (aged-debt) report.
The report is basically doing the following when previewing it in SAP Business One.
It prints the header information etc on the first page and then the detailed information filling up the page as expected - it then prints more lines (not filling up the page - maybe 10 lines or so) from the detailed section to the second page (without any headers etc) - then the third page contains headers again with the detailed line data and the fourth then has a couple of lines but without any header data - and so on...
We've checked the standard page settings - all looks fine.We've checked the section expert - again can't see anything particularly bizarre. It's as though Crystal thinks the page is actually ending someway down the second page!
Has anyone come across a similar scenario and what would be the solution to this sort of issue?
Many thanks,
MohsenHi Mohsen,
You may check Selection Expert - Paging tab to see if they have been changed. What is the setting for Report header and Page header?
Thanks,
Gordon -
Reports distribution in reports 10g
I am making the distribution file whose content are as follows in tne group filter
dest_1: desname=c:\\_.pdf_ destype=file desformat=pdf level=report
dest_2: desname=HP LaserJet 4 Plus destype=printer desformat=bitmap copies=1 level=Report
But when I am calling this report thru the 10g AS by giving the URL as
http://iitappserver:7778/reports/rwservlet?&report=RI003¶mform=yes batch=yes distribute=yes destination=c:\ri003.txt&userid=iit/iit@dbiit
Ialthough I am getting the messgae as 'report run successfully 'but I am not getting the outputs as I have specified in the distoination file
Your help is appreciated in this regard
Varsha Kapoor
iBilt Technologieshi
the syntax used in given question is wrong.
let me know ur mail id.. i will send u some sample..
[email protected]
regards
prasanth a.s.
Maybe you are looking for
-
How do i trim a voice over recording in imovie?
I am making an imovie with the most recent updated imovie software. I have recorded about 30 minutes of voice over...now I need to trim it as there are bloopers and mistakes...it is possible to edit that recorded voice over or no? I can't seem to fin
-
SQL replace function in JDeveloper
In SQL*Plus I run the following queries... select last_name, phone_number from employees LAST_NAME PHONE_NUMBER Chung 650.505.1876 Dilly 650.505.2876 Gates 916.764.6600 select last_name, replace (phone_number, '.', '-') from employees LAST_NAME REPLA
-
Hi all, I have a table with Purchase Order Receipts and Invoice data in it. The problem I have is that the invoice number only appers on one of the receipted lines and the rest of the lines are Null value. What SQL could I use so that it will only sh
-
Search help for local system directories in ABAP program
Hi all, Can anyone tell the standard search help available for local system directories on the client system? Regards, MVD
-
When i open YouTube in Safari, i am directed to a "fake site". I cleared my cache, deleted some cookies, and still happening. I get the real YouTube thru Firefox.... Any suggestions??