Sample code to crash JVM

Hi,
I am working on a program that do not report the stack trace from a crashed JVM (this is reported by customer).
However i do not know how to crash a JVM, using a simple java application, so as to debug the above problem.
Can someone please suggest a simple java application to cause JVM crash (JDK1.4.2.10 or JDK 1.5.x)
Thanks

Hi,
//add the following line anywhere
//credits++ to [email protected]
import sun.dc.pr.PathDasher //[goes to the top alongwith other import(s)]
PathDasher dasher = new PathDasher(null) ;
//The JVM crashes when this line is executed
// This is worrying because even Tiger [5] crashes
Thanks
Message was edited by: SamratBanerjea
SamratBanerjea

Similar Messages

Missing "Crash Landing" iPhone SDK sample code.

Ok, I'm at the phase in my project where I need to start integrating the audio. I've been told , and theres plenty of references on the net, to try and base off a piece of code off the "Crash Landing" sample code.
Google tells me it used to be on the Iphone dev page on apples site, but there is no reference to the sample code on Apples site and apples search engine comes up blank.
Has this been removed? If it has, is there anywhere else that features examples of using the OpenAL architecture. I realise there is a new architecture for audio introduced, but for various reasons, we can't use it.

Hi i need reference from the crash landing code for my own development...it was there on my machin some months back and i hve also installed on my iphone also using xcode...but i recently discovered the sample code is not there on my machine as mistakenly i have removed it from my machine. i need it so if someone can provide me the sample code i can easily over come the issue in my development as it is been resolve in the crash landing. please if i can get the code it will be of great help.

Printing report that has a parameter with multiple values crashes jvm

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

"Speak Here" sample code is not working

Hi,
I downloaded Speak here iphone sample code from apple site.
Its not working on simulator. I connected headphone and mic to macbook.
Crashing at function initWithURL file name is AudioRecorder.m
Crashing line = OSStatus result = AudioQueueNewInput(.....
I want to use same code in my application.
Thanks,
Ganesh Pisal

"Speak Here" code is available for iphone or ipod?
Its not working on my simulator and ipod 2.1.
Not tried on iphone, I dont have iphone.

How to Delete a Specific Cell in a Matrix + plz Give sample code for Lost F

hello there !!!!
i m in Great Trouble please help me out..
i have to search for a specific Column n then i have to validate that portion, similarly after validating i have to add update delete all the fuction apply... so please help me i m very upset.
Public Sub HandleEventts_Allowance(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByRef BubbleEvent As Boolean)
        Try
            Dim Count As Int32
            If FormUID.Equals("Allowance") Then
                If (pVal.BeforeAction = True) And (pVal.ItemUID = "1") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) Then
                    If pVal.Row = 0 Then
                        'BubbleEvent = False
                    End If
                    o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                    Count = o_Matrix.RowCount()
                    SBO_Application1.MessageBox("Matrix Count is " & o_Matrix.RowCount)
                    Validate(pVal, EventEnum, FormUID, BubbleEvent)
                End If
            End If
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub
    Public Sub Validate(ByRef pval As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByVal FormUID As String, ByRef BubbleEvent As Boolean)
        Dim Row, ii As Integer
        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
        o_Matrix.FlushToDataSource()
        Try
            For Row = 2 To o_Matrix.RowCount
                StrName = Convert.ToString(DBtable.GetValue("CardCode", Row - 1)).Trim()''' i got Error over there n rest of my code is also not working pls...
                StrUId = Convert.ToString(DBtable.GetValue("U_AlwID", Row - 1)).Trim()
                StrEnter = Convert.ToString(DBtable.GetValue("U_SupEnter", Row - 1)).Trim()
                StrExist = Convert.ToString(DBtable.GetValue("U_SupExist", Row - 1)).Trim()
                If Row - 1 < DBtable.Rows.Count - 1 Or (Not (StrName.Equals(String.Empty) And StrUId.Equals(String.Empty) And (StrEnter.Equals(String.Empty) Or StrExist.Equals(String.Empty))) And (Row - 1 = DBtable.Rows.Count - 1)) Then
                    If (Not StrName.Equals(String.Empty)) And ((StrUId.Equals(String.Empty) Or StrEnter.Equals(String.Empty)) Or StrExist.Trim.Equals(String.Empty)) Then
                        SBO_Application1.StatusBar.SetText("Invalid values provided!Blank values not vllowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                        BubbleEvent = False
                        Exit Sub
                    End If
                    For ii = Row To DBtable.Rows.Count - 1
                        If Convert.ToString(DBtable.GetValue("ColName", ii)).Trim().Equals(StrName.Trim()) Then
                            SBO_Application1.StatusBar.SetText("Invalid Allowance ID: Duplication Not Allowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                            oForm.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
                            BubbleEvent = False
                            Exit Sub
                        End If
                    Next
                    If CDbl(StrName) < 0 Then
                        SBO_Application1.StatusBar.SetText("Invalid values provided!Blank values not vllowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                        BubbleEvent = False
                        Exit Sub
                    End If
                End If
            Next Row
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub

Hello there
sir i want to Add Update and delete these three basic operation onto the Matrix, Sir u game me a Sample code of Delete a specific Column...
Sir can u do me a favour pls leave every thing n just told me how to update a matrix ,like i have to fill the matrix field through the DATABASE table now i want to update the DataBase table from the matrix..
i just only know thta i have to fill back database table with the help of FLUSHTODATABASE()
here is my Sample Code...n i have to update in the validate portion...
Public Sub HandleEventts_Allowance(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByRef BubbleEvent As Boolean)
        Try
            Dim oCellValue As SAPbouiCOM.EditText
            If FormUID.Equals("Allowance") Then
                If (pVal.ItemUID = "MatAllow") Then
                    If pVal.Row = 0 Then Exit Sub
                    o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                    If (pVal.Row > o_Matrix.RowCount) Then Exit Sub
                    oForm = SBO_Application1.Forms.Item(FormUID)
                    If (pVal.ItemUID = "1" Or EventEnum = SAPbouiCOM.BoEventTypes.et_CLICK) Then
                        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                        If pVal.ColUID = "ColName" And pVal.BeforeAction = True Then
                            If pVal.Row = 0 Then Exit Sub
                            oCellValue = CType(o_Matrix.Columns.Item(pVal.ColUID).Cells.Item(pVal.Row).Specific(), SAPbouiCOM.EditText)
                            If (oCellValue.Value.Trim().Equals(String.Empty) And o_Matrix.RowCount <> pVal.Row) Then
                                SBO_Application1.StatusBar.SetText("Invalid Allowance ID: Blank Value Not Allowed", )
                                oCellValue.Active = True
                                BubbleEvent = False
                                Exit Sub
                            End If
                        End If
                    End If
                End If
            End If
            Validate(pVal, EventEnum, FormUID, BubbleEvent)
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub
Public Sub Validate(ByRef pval As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByVal FormUID As String, ByRef BubbleEvent As Boolean)
        Dim str, str1 As String
        Dim checkbox1, Checkbox2 As SAPbouiCOM.CheckBox
        Dim o_Matrix As SAPbouiCOM.Matrix
        Dim Sum As Integer
        Dim oRecordset As SAPbobsCOM.Recordset
        Dim Container As Integer
        Dim Count As Int32
        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
        oRecordset = o_CompanyObj.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
        Try
            For Count = 0 To DBtable.Rows.Count - 1
                CodeFill = Convert.ToString(DBtable.GetValue("Name", Count).Trme())
                NameID = Convert.ToString(DBtable.GetValue("ColUID", Count).Trim())
                Price = Convert.ToString(DBtable.GetValue("ColPrice", Count).Trim())
                Quantity = Convert.ToString(DBtable.GetValue("ColQuant", Count).Trim())
                Total = Convert.ToString(DBtable.GetValue("ColTotal", Count).Trim())
                checkbox1 = o_Matrix.Columns.Item("ColSEnter").Cells.Item(Count).Specific
                Checkbox2 = o_Matrix.Columns.Item("ColSExist").Cells.Item(Count).Specific
                If (checkbox1.Checked = True) And (Checkbox2.Checked = True) Then
                    Dim Sql As String
                    Sql = "Update [@Supplier] Set U_Price=' " & Price & " ',U_ID=" & NameID & "Where Name ='" & CodeFill & " '"
                    oRecordset.DoQuery(Sql)
                End If
            Next Count
            SBO_Application1.MessageBox("Record was Updated")
        Catch ex As Exception
            SBO_Application1.MessageBox(ex.Message)
        End Try
    End Sub

Error while running a sample code

Hello,
I 'm getting the following error while i'm trying to run a
sample code which I have imported into Flex 3.
===================================================================
Severity and Description Path Resource Location Creation Time
Id
unable to open 'C:\Documents and Settings\sn55179\My
Documents\Flex Builder
3\FlexForDummies_Chapter3_Code\libs'FlexForDummies_Chapter3_Code
Unknown 1237909480511 215
===================================================================
Can anyone help me in resolving this issue.
Many thanks in advance.

It's very frustrating that FB stops working when the libs
folder is missing. If you are checking in project files to a source
control app like Perforce, empty folders don't get added, so if you
don't add an initial dummy file, the next time you do a clean sync,
the libs folder may not be there, and even though there is nothing
there, FB complains. :-(

Sample code for routine

Hi all,
This is what I want to achieve. I have an attribute for an IO, but the values for that has to be decided at the transfer structure level. I want to write a routine in the transfer rules to populate the field.
I have another field that gets populated from R/3. I need to write a routine which would take this value and see if it falls in the range and have to decide the value and populate.
I have gl_account coming in, and in the routine I need to take that value of the gl_account and see if it falls in the range of 1 5000 or 6700 - 8130 if so assign a + sign and if not assign a sign to the new field.
Any sample code would be appreciated and rewarded.
Thanks,
Sri

Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
$$ begin of routine - insert your code only below this line        -
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
   Data: temp1 TYPE RANGE OF TRAN_STRUCTURE-ZDEBITCREDIT,
   Data: temp1_line LIKE LINE OF temp1.
   temp1_line-sign = 'I'.
   temp1_line-option = 'BT'.
   temp1_line-low = '001'.
   temp1_line-high = '5000'.
   APPEND temp1_line TO temp1
Data: temp2 TYPE RANGE OF TRAN_STRUCTURE-ZDEBITCREDIT,
   Data: temp2_line LIKE LINE OF temp2.
   temp2_line-sign = 'I'.
   temp2_line-option = 'BT'.
   temp2_line-low = '5001'.
   temp2_line-high = '8000'.
   APPEND temp2_line TO temp2
Data: temp(1) char.
if TRAN_STRUCTURE-0glaccnt IN temp1.
   temp3 = '+'.
elseif TRAN_STRUCTURE-0glaccnt IN temp2.
temp 3= '-'.
endif
RESULT = temp3 .
returncode <> 0 means skip this record
RETURNCODE = 0.
abort <> 0 means skip whole data package !!!
ABORT = 0.
$$ end of routine - insert your code only before this line         -

Routine sample code for reading 2 fields from existing DSO

Hi Gurus,
I am a monkey when it comes to write ABAP code. I have one DSO-A where we store accounting info of purchading (from DS 2lis_02_acc) and one DSO-B getting data from 2lis_02_scl data source.
We need to write a rountine to read DSO-A for G/L account and populate DSO-B G/L account field.
Please provide me the sample code for this.
Warm Regards,
Anil

Hi anil,
Create a local table this is type of you source,
Data : LV_table TYPE XXXX
use the select statement to read the table of DSO .You have to use th active table for the dso that you want to read data from.
Select xxxfieldxxx FROM /BIC/A..........50
into lv_table where
filed name of of scheule line probably order no and item no .
<soruce-fields>-IOBELN = IOBELN
and <source-fields>-IOBELP = IOBELP.
Checke the techinal name i am not sure about it. It will be something like that.
Cheers mate

Sample Code for CRM enhancement in BADI

hi,
can anybody please give me sample code for BADI for CRM enhancement.
i have added couple of z field in a extract structure. now i have to write code in BADI to populate those fields.
please do not send code for user exit.
Regards
Subrata

Hi Aviral,
Please consider below thread :
http://scn.sap.com/thread/2069370
Best regards - Christophe

Need sample code to get handle of Selected rows from ADF Table

Hi,
I am new to ADF. I have an ADF table based on VO object.On some button action,I need to get handle of selected rows in application module.
If anybody is having sample code to do this then please share with me.
Thanks,
ashok

wow now link http://blogs.oracle.com/smuenchadf/examples/#134 is working.thanks a lot.
also the link http://baigsorcl.blogspot.com/2010/06/deleting-multi-selected-rows-from-adf.html is very useful. Thanks a lot for Sameh Nassar too.He made it clear that in 11g Select column is not available for a ADF table and provided a solution to get Select column.
Thanks,
ashok

How to create a database for sample code from Tutorial/Book?

I want to try out the sample code from [http://shop.oreilly.com/product/0636920013471.do] for the book SQL Pocket Guide 3rd Ed.
I have downloaded the oracle vm/appliance for oracle 11g2 and I have started sqlplus as sysdba.
I'm feeling overwhelmed with these links describing how to create a database:
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
[http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html]
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
(1) What is the command to list the existing databases?
(2) What is the command to delete an existing database?
(3) When creating a new database with the create database command, is it necessary to specify the logfile, character set, national character set, datafile, sysaux datafile, undo tablespace, temp table space? Do these have reasonable defaults? I'm not sure what proper directories are to specify for Linux and the examples are for windows.
Can someone give me a simplified create database command to create a database called 3rdEdPocketGuide? Should I follow the example at [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html] and instead of orcl use 3rdEdPocketGuide?
(4) What command do I use to execute the script that comes with the book SQL Pocket Guide 3rd Ed? This is the script that has all the drop table, create table and insert commands in it.
(5) What command do I use in sqlplus to set the current default database prior to running this script? Perhaps this is the connect command? I don't want my script to create tables in the system database.
(6) I tried the command "connect 3rdEdPocketGuide" and it prompted for a password! Yikes! What password? Do I need to specify a password when I create a database? I cannot tell if I have successfully created such a database or it is just prompting me for a password to thwart malicious users. Is it is possible to create databases which don't require a password or maybe a zero length password?
Thanks
Siegfried
Edited by: user8816970 on Sep 26, 2012 12:01 PM
Edited by: user8816970 on Sep 26, 2012 12:18 PM

user8816970 wrote:
Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.
Thanks!
Siegfried
>Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
above does NOT use SQL*Net to connect to the instance
>
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.SQL Developer can only connect to the instance via SQL*Net
>
Thanks!
Siegfrieda database in SQL Server is same as schema/user in Oracle

Report Engine SDK sample code questions

Hello,
I've been able to view a boxi report in an iframe via the Enterprise SDK by modifying the sample code in the HowToViewWebiReports_VB example.
I'm not totally happy with the way that's working, so I'm looking at using the Report Engine SDK, although I understand it's performance and scalability isn't quite as good as the Enterprise SDK.
I'm a VB.NET guy, not a C# guy, and I'm not clear on how the wssdk_net2.0_portal_sample_12.0_en example is supposed to work.
I don't have one and my CMS server is running Tomcat, not IIS so there's not going to be an ASP.NET web service running there.
In the dsws.config for the wssdk_net2.0_portal_sample_12.0_en example I put the name of the CMS server, but it's looking for a web service at http://cmsservername:8080/dswsbobje/services/Session, but I get a 404 when i try to hit that.
I'm not familiar with Tomcat, but in searching around on the server, I see a dswsbobje directory under the webapps in my Tomcat installation, but I don't see a services or a Session folder underneath that. In the dswsbobje folder I see the following folders:
BOAR-INF
META-INF
WEB-INF
xsd
Is there something else that needs to be installed on the Tomcat server to get the web service running?
-Eric

It looks like I have something there. When I launch launch http://servername:8080/dswsbobje, I see:
Apache-AXIS
Hello! Welcome to Apache-Axis.
What do you want to do today?
Validate the local installation's configuration
see below if this does not work.
To enable the disabled features, uncomment the appropriate declarations in WEB-INF/web.xml in the webapplication and restart it.
Validating Axis
If the "happyaxis" validation page displays an exception instead of a status page, the likely cause is that you have multiple XML parsers in your classpath. Clean up your classpath by eliminating extraneous parsers.
I clicked on the "Validate" link and I see:
Axis Happiness Page
Examining webapp configuration
QaaWS Configuration
QaaWS Servlet is not valid.
ErrorServer servername not found or server may be down
See Web Application log to get more info or read QaaWS v2 documentation starting with section
Perhaps this environment needs some additional configuration?

How to create the Sap script & Layout Set (wants sample code)

Hi All ,
Can you please provide me the step by step procedure
to create the Sap script & Layout Set .(please provide sample
code/links /docs for layout & print program).
Regards
Rahul

hi,
go through the following links what i found to create sap script.
http://www.thespot4sap.com/Articles/SAPscript_Introduction.asp
http://abapliveinfo.blogspot.com/2008/01/free-sapscript-made-easy-46-book.html
http://www.thespot4sap.com/articles/SAPscript_example_code.asp
http://idocs.de/www3/cookbooks/sapscript/sapscript_1/docu.htm
http://idocguru.com/www5/cookbooks/sapscript/sapscript_1/example.htm
www.geocities.com/wardaguilar25/sapscript-tutorial.html
http://logosworld.de/www3/cookbooks/sapscript/sapscript_8/docu.htm
how to create a scripts?give steps?
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2969311
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2902391
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3205653
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3111402
http://www.sap-img.com/sapscripts.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
http://www.sap-basis-abap.com/sapabap01.htm
http://www.sap-img.com/sapscripts.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci943419,00.html
http://sap.ittoolbox.com/topics/t.asp?t=303&p=452&h2=452&h1=303
http://www.sapgenie.com/phpBB2/viewtopic.php?t=14007&sid=09eec5147a0dbeee1b5edd21af8ebc6a
Other Links

Customer Open Interface sample code?

Hi
I am trying to import some data (customers) from a legacy
system into oracle. I would like to use the oracle customer open
interface but can anyone please give me some sample code how
they did the import?
Thank you
alpha

Hi
I am trying to import some data (customers) from a legacy
system into oracle. I would like to use the oracle customer open
interface but can anyone please give me some sample code how
they did the import?
Thank you
alpha

Simple sample code to display a Crystal Report from Crystal Enterprise?

I am looking for a sample application that will "simply" view a report stored on our Crystal Enterprise server. I have looked at "boesdk_net_samples_12.zip", but that isn't really what I am looking for. And, the "CrystalReportViewer" and "CrystalReportSource" add ins for Visual Studio seem to only work with a "local" file (instead of one Managed or UnManaged on our Crystal Enterprise server).
Can anyone point me to the right place? (Navigating the SAP site is so damn confusing!)

Hi Shayne,
You are not clear on how you will know which report you want and for which user? You can query the CMS database for the user and get all of their reports but without knowing which report object ID to get you will need to have the user select one. Unless you simply assume you want the last one, but if you don't give them a choice and they miss one day, or what ever your parameter is to select, there will be no way to get back to that report.
For sample code on how to query the BOE Server look in the Enterpise SDK samples. You do need to use managed code. I don't suggest going into the FRS\output folder to use unmanaged reporting. There are a lot of folders created and it's easier to simply query the CMS database to get the latest instance.
Since you have BOE you should also have a support contract. I suggest you log a case on line in Service Market Place and get a dedicated Engineer to assist you.
This may be simply easier for you to use the Personal Favorites folder of the user so they can browse all report instances belonging to them. I suggest you talk to the BOE Administrator for more info on what BOE is capable of doing. what you want is fairly easy to manage with Enterprise itself.
Thank you
Don

Sample code to crash JVM

Similar Messages

Maybe you are looking for