Sample code with more than one ResultSet in JSP

Hi
Can anyone give me sample JSP code using crystal reports JRC with more than one ResultSets which works, since mine always seem to be giving error .
Thank you
Selvi
RCAgent5 detected an exception: Cannot modify a read-only collection.
at com.crystaldecisions.reports.common.e.a.clear(Unknown Source)

You can access the JRC samples from SDN in the Business Objects Portal. The link to them can be found [here.|https://smpdl.sap-ag.de/~sapidp/012002523100006008982008E/crxi_r2_jrc_web_smpl.zip] There is a sample called jrc_resultset_datasource that shows how to pass a result set to a report; you can use this and modify it to allow another result set to be passed in.
As a note, if you are having issues and believe it is your code, start with the sample and take small steps when adding new functionality so that you can determine where things go wrong.

Similar Messages

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

Can i open more than one Resultset object

hi in my program i have to retrive data from three table and the data from three
table i have to use in another one
i wanna know that can we open more than one ResultSet object within one
try{
}catch{] block ( i means ResultSet rs = st.excuteQuery(query) more than one time for different -different tables)
or there is any other way to do this

You can only have one active result set per statement at a time.
Depending on the driver you are using you might be able to have more than one active statement (and result set) on one connection. Or not.
Try catch has nothing to do with that.
If you are nesting result sets then it is likely you should be using a join (SQL) which would then only require one result set.

Get the data with more than one of the desired value

Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..

First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
        DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
        DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
        DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
        DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
        DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
)

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Reversing Landed Cost document with more than one vendor

Hi Experts,
Reversing Landed Cost document with more than one vendor:
My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
Created Landed cost by selecting 2 vendors in the Vendor field.
After you picked one vendor, you go to the vendor code/name again then choose another vendor you
need, once you picked, the system will ask you whether you want to delete the previous data, then
you say no, after then you will see the vendor name became "different vendors" and code be "********"
(on the vendor tab: you will see two vendors)
To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
the vendors for Good Receipts & Landed Cost.
Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
can with one vendor to reverse the transaction.
Can this functionality be added to future versions?

Take a look at business area and groupings in they payment program settings...
I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
Grouping Open Items and Individual Payments
Wherever possible, the payment program will always group items together for payment.
The payment program can only group together open items for payment if the open items in an account have the same:
1. Currency
2. Payment method in the item
3. Bank in the item
4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
You can also pay open items from different company codes together, as well as customer and vendor line items.
Items in an account are not grouped together if you:
1. Make payments separately per business area. This procedure entails separate payments being created per business area.
2. Want to make individual payments
Items in which a payment method is specified are not grouped with items in which no payment method is specified.
You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
 <f:facet name="second">
 <af:panelStretchLayout id="pa1"
 binding="#{backingBeanScope.Assign.pa1}">
 <f:facet name="center">
 <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
 binding="#{backingBeanScope.Assign.r1}"/>
 </f:facet>
 </af:panelStretchLayout>
 </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Slider with more than one thumb

Hi,
does anybody know a slider with more than one thumb?
The JSlider-class only provides one thumb, but I need more thumbs to displace.
That why I posted the last question: I found one in the web but when I call the constructor, I get that error.
Thank you all
Katharina

Hi,
I also tried MThumbSlider, a.k.a. CMThumbSlider (C for
Cougaar?), the slider with more knobs. (keywords: slider,
knob, knobs, thumb, thumbs, more, two, three.)
I downloaded the code from the link mentioned below,
run the example and it worked just fine. When I tried
to subclass the slider to add tooltips I got an exception
from the loader:
UIDefaults.getUI() failed: no ComponentUI class for:...
The slider has its own package. Its constructor
(indirectly) calls the following utility function,
passing itself as an argument, just before calling
JSlider.updateUI. The latter then calls UIManager.getUI,
which fails with the exception mentioned above.
public static void setUIName(JComponent c) {
    String key = c.getUIClassID();
    String uiClassName = (String)UIManager.get(key);
    if (uiClassName == null) {
      String componentName   = c.getClass().getName();
      int index = componentName.lastIndexOf(".") +1;
      StringBuffer sb = new StringBuffer();
      sb.append( componentName.substring(0, index) );
      String lookAndFeelName = UIManager.getLookAndFeel().getName();
      if (lookAndFeelName.startsWith("CDE/")) {
        lookAndFeelName = lookAndFeelName.substring(4,lookAndFeelName.length());
      sb.append( lookAndFeelName );
      sb.append( key );
      UIManager.put(key, sb.toString());
}When the slider is subclassed outside of the package,
the above results, e.g., in
UIManager.put("MThumbSliderUI", "MetalMThumbSliderUI");thus the package name is lost. To correct such behaviour
I changed the substring with the package name, including
the last dot. The same goes for function createUI.
There is another thread on this subject:
http://forum.java.sun.com/thread.jsp?forum=57&thread=348245
The link were I found the code is
http://www2.gol.com/users/tame/swing/examples/JSliderExamples1.html

More than one ResultSet

hello,
in my page, i use more than one ResultSet like:
ResultSet rs_car = "select * from ...";
ResultSet rs_van = "select * from ...";
ResultSet rs_truck = "select * from ...";
ResultSet rs_test = "select * from ...";
while (rs_car.next() {
while (rs_van.next() {
while (rs_truck.next() {
while (rs_test.next() {
why don't it work?
I ever become an "RecordSet closed"-Error
thx

hy
This is just solution,
where is statment ?
If there is more code ...but try this
ResultSet rs_car = "select * from ...";
while (rs_car.next() {
ResultSet rs_van = "select * from ...";
while (rs_van.next() {
ResultSet rs_truck = "select * from ...";
while (rs_truck.next() {
ResultSet rs_test = "select * from ...";
while (rs_test.next() {
try by

Fill BEx Variable with more than one value via Custom Exit

Dear SDN comunity,
I want to fill a BEx Variable via a custom exit. My problem is, I don't know how to fill this variable with more than one value.
I try to give you some background info based on an exaple:
Variable-Details
Type of Variable: Characteristic Value
Variable Name: ZCCD
Description: Company Code Selection
Processing by: Custom Exit
Characteristic: Company Code
Variable Represents: Multiple Single Values
This is the used ABAP code:
WHEN 'ZCCD'.
CLEAR l_s_range.
l_s_range-low = '2002;2004'.
l_s_range-sign = 'I'.
l_s_range-sign = 'EQ'.
APPEND l_s_range TO e_t_range.
The system returns this message:
Value "2002;2004" is too long for variable ZCCD
appreciate your help!
//michael

Eugene, Marcus
it works now, thx a lot!
Please find attached the final code:
CLEAR l_s_range.
l_s_range-low = '2002'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR l_s_range.
l_s_range-low = '2004'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
(Delta to Marcus's code is bold)

Updating JournalEntries object with more than one currency fails

I'm using SBO 6.50 (exactly CEE version 7.60.014 SP:01 EF:08).
 I'm trying to update memo field of existing journal entries. Most of them works OK, but if I try to update entry with more than one currency, update fails with an error code -5002 and message:
 Transaction includes more than one currency [OCRN].
Code (in C++) is quite simple:
SAPbobsCOM::ICompanyPtr m_company = SAPbobsCOM::ICompanyPtr("SAPbobsCOM.Company");
SAPbobsCOM::IJournalEntriesPtr pEntry = m_company->GetBusinessObject(SAPbobsCOM::oJournalEntries);
long m_nId = 1; // TransId field, any valid value
try
 if (pEntry->GetByKey(m_nId) != -1)
 return;
 pEntry->Memo = _bstr_t("Memo");;
 if (pEntry->Update() < S_OK)
 throw(0);
catch(...)
 long lError; BSTR bstrError;
 m_company->GetLastError(&lError, &bstrError);
What's wrong? Using multiple currencies in journal entry is correct, it is possible to add them manually so it should be possible to update such an "safe" field as Memo is.

Hi,
I have the same problem, but if you go to Administration->System Initialization ->Document Settings, select "Per Document", and in Document, choose "Journal Entry", by default, the options are clicked, or "Blocked", this is why in DI yoy get this message.
Try to unchecked and it will work.
HTH,
Ribeiro Santos

Generating excel with more than one tab

Hi,
I would like to ask if anyone of you know how to generate excel file from Oracle Reports with more than one tab? Is it possible? If yes, can you provide me some references on how to do it. Thanks in advance.

Hi,
Do this:
1. Create an Excel file, put some dummy data in 2 or more worksheets. Save as HTM. This will create one main HTM file, and some sub-files under a folder. One HTM sub-file will be created per worksheet. In addition, one XML sub-file (called filelist.xml) and some other sub-files will be created. (you have already done this)
2. Open one of the HTM sub-files in reports builder, and follow the steps shown in the Excel Demo on OTN to insert data in this file at appropriate place, and save as JSP.
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
3. You can repeat this step for all worksheets. So finally you will get one JSP file per worksheet.
5. Now open the main file in reports builder, and add the Excel contentType element at the top
 <%@ page contentType="application/vnd.ms-excel; charset=windows-1252" %>
6. In this file, search for the following tag
 <x:WorksheetSource HRef="./filename_files/sheet001.htm"/>
Note that instead of filename_files you will have your own file name
Change this tag as following:
 <x:WorksheetSource HRef="./filename_files/sheet001.jsp?userid=scott/tiger@myDb"/>
Note that in userid, you must provide your own DB connect string
7. Additionally, change ALL references to sheet001.htm in this file to sheet001.jsp
Do steps 6 and 7 for sheet002.htm, sheet003.htm, and so on (if needed).
8. Open filelist.xml (you will find this file inside the folder that contains sub-files). Here, too, change all references to JSP instead of HTM
9. Now place the main JSP file as well as the folder containing all sub-files inside your J2EE deployment folder. Run the main JSP file. This will run the associated JSP files (the worksheets).
This will do the trick.
If you are worried about placing the USERID information inside your JSP code, then you can use CGICMD.DAT file, and place the userid there.
Navneet.

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Sample code with more than one ResultSet in JSP

Similar Messages

Maybe you are looking for