Sample configuration of using (MSTP) feature on 3560

Hi,
I have 3560 switch running PVST, performing purely as layer 2 vlans, I already reached 120 vlans so I will be running out of spantree soon.
I would like to have a sample configuration of using (MST) feature to map multiple vlans to a single vlan to minimize my maximum spantree per vlan usage.
Any sample config would be highly appreciated.
thanks,

Hi Friend,
Have a look at this
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# instance 1 vlan 10-20
Switch(config-mst)# name region1
Switch(config-mst)# revision 1
But I will recommend you to go through the complete link below to get full idea of MST before implementing in your network.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swmstp.htm#wp1017196
HTH,if yes please rate the post
Ankur

Similar Messages

  • In illustratorCC2014, I tried to configure the use of the GPU of the new features.  I have installed the java.  I have a 3D set in navidia control panel.  illustrator CC2014 will not start.  I have not repaired even if you restored in navidia control pane

    In illustratorCC2014, I tried to configure the use of the GPU of the new features.
    I have installed the java.
    I have a 3D set in navidia control panel.
    illustrator CC2014 will not start.
    I have not repaired even if you restored in navidia control panel.
    I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

    In illustratorCC2014, I tried to configure the use of the GPU of the new features.
    I have installed the java.
    I have a 3D set in navidia control panel.
    illustrator CC2014 will not start.
    I have not repaired even if you restored in navidia control panel.
    I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

  • [svn:bz-trunk] 10057: Update the sample configuration to include a comment to warn people not to use debug level logging in production .

    Revision: 10057
    Author:   [email protected]
    Date:     2009-09-08 10:58:36 -0700 (Tue, 08 Sep 2009)
    Log Message:
    Update the sample configuration to include a comment to warn people not to use debug level logging in production.
    Modified Paths:
        blazeds/trunk/resources/config/services-config.xml

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Can Cisco Configuration Professional to use IPS feature ?

    Dear Expert
    Hello.
    Could you tell me about Cisco Configuration Professional.
    I'd like to try the IOS-IPS on Cisco2901-SEC/K9.
    I was search in CCO about Cisco Configuration Professional.
    The Cisco2901-SEC/K9 does not support SDM.
    But, The Cisco2901-SEC/K9 supported the Cisco Configuration Professional.
    Can Cisco Configuration Professional to use IPS feature like SDM?
    Regards,
    Takuro.

    Hi,
    yes, you can configure IOS IPS from Cisco Configuration Professional.
    CCP has a wizard to guide you through the process, this is a link for that :
    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6634/prod_white_paper0900aecd8066d265.html
    i hope this helps you.
    Mashal

  • Linksys WRP400 - VoIP Sample configuration guide for VoiceMeUp

    Thanks to Linksys for that fine device. Few installations so far with this device and it has prooven his stability and reliability.
    Note: Good T38 support and excellent QoS.
    Here is a sample of configuration to VoiceMeUp
    Linksys WRP400 - Sample configuration guide
    [english]  -  [français]
    Enjoy!
    For more informations about VoiceMeUp VoIP services, please visit us at voicemeup.com
    Message Edited by NothinElse on 08-25-2008 01:09 PM

    Clearly this is too late to help you, but since this is showing up on Google and there are about a thousand views, this answer might be helpful to another.
    Once you access the Voice Admin menu and provision your device for your VoIP provider, access to the Voice menu is subsequently "Locked". 
    Your VoiP provider's system has set a new unique password for the Voice menu once the provisioned device has synced with your providers system.
    You should be able to get that password from the control panel on you VoIP account profile under "equipment" or a call to support or an e-mail request should garner the password.
    The Login will be "admin" and the password provided will get you back into Voice menu system.
    You will also need this password if you want to reset the Voice features back to factory defaults.  Because of this system it appears that a WRP400 cannot be unlocked by merely using the reset button. 

  • Problem in configuring SSO using SAML for applications hosted on diff m/c

    Hi Techies,
    I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
    I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
    I am summarizing the problem below -
    Steps followed for Configuring SSO using SAML
    1. Created 2 domains on 2 seperate machines namely domainA and domainB
    2. Source appliction is deployed on domainA and the target application is deployed on domaninB
    The steps mentioned in the following tutorial has been followed-
    http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
    3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
    to WEBLOGIC_HOME/server/lib of destination machine.
    4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
    changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
    is thrown -
    " SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
    weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
    in the FederationServicesMBean, key alias: testalias "
    The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
    problem only occurs when domains are created on seperate machines.
    Alterative to the problem: when the certificate is generated seperately for domainB and copied to
    WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
    Note: I am using Weblogic portal 9.2.1
    Any quick replies will be much appreciated. Thanks.
    Edited by saurabh.agrawal at 02/06/2008 2:01 PM

    Hi François,
    You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
    As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
    -Vinod

  • Unable to use share feature in Oracle Linux 6.4

    Hi,
    Please help us to use share feature in Oracle Linux 6.4.
    what extra steps, configuration and functionality needed be to changed in Oracle Linux Environment?
    Regards,
    Arvind 

    Hi Arvind,
    Is this query regarding Azure Files Share feature?
    If yes, I'm Afraid Azure Files is not supported in Oracle Linux 6.4.
    However, a request has been raised with the Product group for this feature and they might consider it in the future.
    Regards,
    Malar.

  • Filemaker Pro 11 - some useful new features

    Just upgraded from Filemaker Pro 9 to 11. There are some useful new features listed at: http://www.filemaker.com.au/products/filemaker-pro/whats-new.html
    At last I will be able to generate charts from datasets, without needing an add-on.
    I have been using the ancient DOS software Open Access (no relation to MS Access) for charting relational SQL databases since 1987. I still use Open Access within DOSBOX for OS X for some complex data processing tasks. Tips at
    http://users.tpg.com.au/aoaug/mac_vpc.html

    I am not an expert in Filemaker But I have been playing with it quite a bit recently. It sounds like you have opened some of the ports required but not all. All IWP is a webpage that is hosted (by the sounds of it) on your local machine you will need to make sure all required ports are open like port 80 for http. I would start by setting the default host on the airport using the airport utility.
    You will want to set this as the ip for the computer that has filemaker on it.
    Airport Utility > Network > Network Options
    You may also want to make sure you reserve this ip in the DHCP reservations section.
    If the IWP page works with this set up then you can work your way backwards opening the required ports ( have a look at this http://help.filemaker.com/app/answers/detail/a_id/6427/~/filemaker-server-and-fi lemaker-server-advanced-port-numbers )
    I had lots of problems with IWP but installing the server add on sorted this. The advantage to this is that the server add on configures your airport to use the machine as a server.
    Dropbox, log me in, back to my mac are slightly different from what you are doing. They are apps which are open and communicating with their respective servers. When you want to host a web site or even just VNC into a mchine you have to have the ports set to forward accordingly, this is because an outside machine is attempting to initiate the contact. This is what the firewalls and security that comes with modern routers are designed to prevent.
    I hope I have helped, I can see your question is quite old.  I saw your topic whilst looking to solve a problem my own.

  • How to Configure and Use Oracle's JMS Connector with Tibco EMS

    Jeff,
    I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
    While deployment not able to get the 'TibcoJMSReference',
    As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
    <resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
    could you help to resolve the issue?
    Error
    Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

    Hi,
    I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

  • How to achieve multiple hirearcy structure using RBS feature in Project server 2013

    HI,
    How can we achieve multiple hirearcy structure using RBS feature in Project server 2013?
    The below is the screen shot of hirearcy.
    GM
    DGM
    AGM
    CM
    Officers
    There are different departments and one AM may handle 4 or more department. How to achieve this permission levels so that GM can see all departments officers created project, same with other levels
    Thanks,
    Sunitha

    Hi Sunitha,
    You could populate the RBS lookup table with 2 levels (department and sub department). Then configuring correctly your
    security categories based on the RBS, the resources in the 1st level (departments) will see projects from all theirs sub departments.
    Some more references:
    http://aboutmsproject.com/project-server-securitypart-1/
    http://ntrajkovski.com/2012/06/04/the-rbs-lookup-table-in-ms-project-server-2010/
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Sample configuration

    Hello,
    I'm wondering if someone can point me to an updated Sample Configuration doc to set up the following :
    Cisco 1121 ACS ver. 5.3 as Radius server
    Cisco 2500 WLC serving Light AP's
    Windows 2008R2 Active Directory as backend authentication server
    Basically my client wants to use an AD security group to allow access to thier Wireless AP's for their user community
    I "think" I have most of the pieces in place. Just a little fuzzy on the full picture. Also, to complete this config, will I need any certificates? What protocols (client) are best to use, etc?
    Thank you                  

    Hello,
    I think the link below might help you out:-
    https://supportforums.cisco.com/docs/DOC-21679

  • QoS Sample configuration: Catalyst 6500-E

    Dear Experts,
    I'm looking for sample configuration documents for configuring QoS on Sup2T with IOS 15.1 SY.
    Cuold you point me to appropriate documents please.
    S

    Port is configurable with QoS service policy.
    Unable to configure VLAN with QoS service policy.
    6506E-2T#
    interface Vlan112
     ip address 10.112.112.1 255.255.255.0
    end
    6506E-2T(config)#int vlan 112
    6506E-2T(config-if)#service-policy type lan-queuing input INGRESS-1P7Q2T
      HQM not supported interface Vlan112MQC features are not supported for this interface
    Anyone come accross this please?
    platform qos vlan-based is not available in config listing.
    (config)#platform qos ?
      10g-only           qos pure 10G mode
      aggregate-policer  Named aggregate policer
      marking            marking keyword
      police             police keyword
      protocol           protocol keyword
      queueing-only      queueing-only (no QoS rewrite,  no policing)
      rewrite            packet qos rewrite enable/disable
      service-policy     global policy map name
      statistics-export  qos statistics data export
    Testing on 6506-E, Sup2T, IOS15.1SY.
    SS

  • Microsoft infopath 2010 is required to use this feature

    "microsoft infopath 2010 is required to use this feature"
    I get this message when I select  Customize Form.
    Infopath 2010 is installed.
    Infopath Form Services is configured and running
    State service is running
    The site is not locked
    The site is not read-only
    The webapp does not have mutiple bindings in IIS
    The site can be opened in SPD 2010
    What else can the problem be?

    Hi ,
    Have you restarted the computer after you installed InfoPath 2010 ?
    You need to restart computer after installing InfoPath .In InfoPath designer ,you can create a SharePoint list template .Have a try here to connect to the specific SharePoint list to see whether the InfoPath designer works well .
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • Message - Microsoft InfoPath 2010 is required to use this feature.

    I get this message when I click 'Customize form' on SharePoint 2010 list.
    I have InfoPath 2013 on my machine. Shouldn't it still work?
    Do I have to change some settings?

    Hi Nikhil,
    Please confirm if you can connect to SharePoint from InfoPath side firstly. If it works, please ignore the link below to configure InfoPath Forms Services:
    http://technet.microsoft.com/en-us/library/cc262263(v=office.14).aspx
    If you are using IE browser, please check in Manage Add-ons wizard and enable both SharepointOpenDocuments and SharePointOpenXMLDocuments. For your reference:
    http://social.technet.microsoft.com/Forums/en-US/91ed0c97-7ba1-4596-8da2-f66b3192cf61/microsoft-infopath-2010-is-required-to-use-this-feature?forum=sharepointcustomizationprevious
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Report using the feature of opening Excel in SAP.

    We are building a custom report using the feature of opening Excel in SAP.
    We need to do things like:
    Protect the worksheet, but leave some rows unprotected
    Freeze the windows
    Have any one ever used this feature before? Can any know how to do this?
    Thank you,
    PV

    No, no extra somewhere.  What it actually is, is that you are calling the methods of the application(sort of).  Here is an example application which does to the freeze panes.
    report zrich_0001.
    include ole2incl.
    data: e_sheet type ole2_object.
    data: e_appl  type ole2_object.
    data: e_work  type ole2_object.
    data: e_col1  type ole2_object.
    data: e_col2  type ole2_object.
    data: e_cols  type ole2_object.
    data: e_cell  type ole2_object.
    data: e_wind  type ole2_object.
    data: field_value(30) type c.
    parameters: p_file type localfile default 'C:RichTest.xls'.
    start-of-selection.
    * Start the application
      create object e_appl 'EXCEL.APPLICATION'.
      set property of e_appl 'VISIBLE' = 1.
    * Open the file
      call method of e_appl 'WORKBOOKS' = e_work.
      call method of e_work 'OPEN'
              exporting
                   #1 = p_file.
    * Write data to the excel file
      do 20 times.
    * Create the value
        field_value  = sy-index.
        shift field_value left deleting leading space.
        concatenate 'Cell' field_value into field_value separated by space.
    * Position to specific cell  in  Column 1
        call method of e_appl 'Cells' = e_cell
               exporting
                    #1 = sy-index
                    #2 = 1.
    * Set the value
        set property of e_cell 'Value' = field_value .
    * Position to specific cell  in  Column 2
        call method of e_appl 'Cells' = e_cell
               exporting
                    #1 = sy-index
                    #2 = 2.
    * Set the value
        set property of e_cell 'Value' = field_value .
    * Position to specific cell  in  Column 3
        call method of e_appl 'Cells' = e_cell
               exporting
                    #1 = sy-index
                    #2 = 3.
    * Set the value
        set property of e_cell 'Value' = field_value .
      enddo.
      call method of e_appl 'Columns' = e_col1
             exporting
                  #1 = 1.
      call method of e_appl 'Columns' = e_col2
              exporting
                  #1 = 2.
      call method of e_appl 'Range' = e_cols
              exporting
                #1 = e_col1
                #2 = e_col2.
      call method of e_cols 'Select' .
      get property of e_appl 'ActiveWindow' = e_wind.
      set property of  e_wind 'FreezePanes' = 1.
    ** Close the file
    *  call method of e_work 'close'.
    ** Quit the file
    *  call method of  e_appl  'QUIT'.
    *  free object e_appl.
    Regards,
    Rich Heilman

Maybe you are looking for

  • Purchase Order Referances maintenace

    Hi Where we maintain that creation of purchase order referances ? Is it possible to create purchase order with referance to info record ? So that after putting info recored number purchase order takes all the refernca data from info record.

  • Dynamic Queries in reports 6i

    Hi, I was wondering if its possible to build a dynamic query on reports 6i. on the report wizard I cant get a user parameter... here is what im trying to do: I have a query where the fileds am retrieving are always the same, what its going to change

  • How to config owb browser?

    i have installed oracle 8.17 and,i have configured owb Repository,owb Runtime success but when cofigure owb browser,it mentioned must input oracle 9i,should i must install oracle 9i in order to use owb?

  • Implementing a quadTree in labVIEW

    I am trying to use a quadTree to efficiently store a 2-D map of data but have been having trouble figuring out how to go about it. I have written an implementation for a quadTree in Java and have been having some issues with the logistics for a labVI

  • WIP in KKS2 for PER

    Hi, When the Work in process in KKS2 will be updated in PER settlement. Thanks,