Sample document : "simulate" not possible ?

When we create sample documents thru F-01 transaction, it is possible to enter tax data but the "simulate" entry is greyed in the menu. It is not possible to simulate and there is no tax automatic posting in the saved document. The documents which are created with sample have no problem with this, but I would know where it is described in the documentation for giving an "authorized" answer to the user. We are in 4.7. Can anybody say were to find the detailed documentation about this ?

I had a look and this is quite technical...
if the simulation is active for a transaction (or not), is controlled by table T020. For F-01 the relevant entry in the table is FBM1 (transaction F-01 starts transaction FBM1 - you can check that in SE93). If the field function class (FUNCL) in table T020 contains D or M (whatever they mean...), the Simulate is turned off in the transaction... That's it... I cannot explain further, because the data is maintained by SAP in this table, and there is not much help to it...

Similar Messages

Resetting this reverse document is not possible - FBRA

Hi,
I'm trying to reset the cleared items with Tcode FBRA also system is throwing error like below
==================================================================================================
Resetting this reverse document is not possible
Message no. F5579
*Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:*
Exchange rate differences were posted.
=================================================================================================
the document has items of exchange rate differences, but,
Question: The exchange rate difference it's related with t-code fagl_fc_val ???l

Hi,
Reverse the document using FB08 and input the reversal document no in the reset transaction FBRA.
Hope it works.
~Andrew

Material Document cancellation not possible

Dear All,
First of all sorry for the long query, it is required to give a clear perspective of the issue.
I am having an issue in which i am not able to reverse the GR which is made on a P.O that P.O is a third party P.O.
I am getting the message "The value of goods movement is negative"
the scenario is as below:-
There are two systems both are SAP system and they belong to the same group of company.The 1st system places an P.O to the 2nd system,then the 2nd system creates a sales order with reference to the P.O and then the sales order in turn creates a PR automatically(as normally happens in third part scenario). That PR gets converted to P.O and the P.O is placed to another vendor which is different from the entire entity.
they have(the 2nd system) placed the order for the material suppose "X" to the outside vendor.
Statistical GR normally happens in 2nd system which triggers a invoice in the 1st system at the same time through an IDOC.( this is only for information)
in this case once the outside vedor has confirmed of the despatch of goods GR made in 2nd system but physicaly the goods have not arrived at 1st system.
now when the goods actually arives at 2nd system they found that the material is sth else than "X" so they didn't made a GR in 1st system and straight away returned the goods.
Now the status of various documents are as below.
P.O of the 1st system--- 1) Invoice has been done equal to the billing amount in 2nd system
                                    2) Invoice reversal has been done for the same amount as above.
Sales order in 2nd system:-1) Invoice or billing has been done.
                                        2) It has been cleared from finance side.( the sales order is in completed ststus)
P.O in 2nd system:- 1) GR done
                              2) Invoice done against GR
                             3) Subsequent debit amounting equal to invoice amount made.
So could some one please let me know first of all whether a GR reversal is required in this case? As the GR is statistical in the 2nd system and the 2nd system is not actually receiving any goods.
If yes then what is the meaning of the messge given in the begining?
I tried to reverse some other P.Os for the same material which are having GR and IR on a trail basis and i am able to do without any error.
If the material valuation is going negative then it should happen to all?
Thanks for your patience in going through the long query and sending a reply.
Regards,
Sushanta

Have you change the PO price in another goods receipt and after that made a goods receipt reversal? I got this message when we did a goods receipt with a PO price and the good reversal with a different PO price. The system acumulate the variance and one time they do not allow you to do the goods reversal because you get negative.
regards

Deletion of Document templates not possible - 'Ok' 'Cancel' not displayed

Hello,
I want to delete a few Document templates. I use the business role 'SALESPRO', I go to 'Document Templates', choose a template, press the button 'Delete' (icon garbage bin) and a I get a pop-up window but without the buttons 'OK', 'Cancel' .
The pop-up is empty not even the title 'Confirm Deletion'.
Why's that ?
Any hints on how I could tackle this ?
I am deep in debugging but I do not seem to get anywhere, started from here:
Class CL_CRM_OI_T_TEMPLATELIST_IMPL
METHOD eh_ondeletetempl_btn.
DATA:
    lv_title TYPE string,
    lv_text TYPE string.
IF gr_confirm_popup IS NOT BOUND.
    lv_title = 'Confirm Deletion'(001).
    lv_text = 'Do you really want to delete?'(002).
    CALL METHOD comp_controller->window_manager->create_popup_2_confirm
      EXPORTING
        iv_title          = lv_title
        iv_text           = lv_text
        iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_okcancel
*        IV_CUSTOMBUTTONS =
      RECEIVING
        rv_result         = gr_confirm_popup
    gr_confirm_popup->set_on_close_event( iv_event_name = 'CONFIRM_POPUP_CLOSED' iv_view = me )."#EC NOTEXT
ENDIF.
gr_confirm_popup->open( ).
Initially I thought that there is some oscure authorization needed but the authorization trace did not show anything.
Thank you
ENDMETHOD.

Prasenjit,
I was about to post the solution. I discovered that component but the code did not even go to DO_PREPARE_OUTPUT.
The solution was to 'Disable Cookies' (marked this checkbox in the technical profile associated with the business role).
I got the idea to try this after I came across a method get_server_cookie that could not read the cookie previously set by set_server_cookie (to this extent I came to debug .

Document Reversal not possible created using MFHU - REM

Hi Gurus,
We have follwoing PP scenario implemented for our client as a part fo REM-HU Process
1. Handing unit creation using HUP1-Packing of finished product
2. GR of finished Goods (131 Mvt) and GI of compoenent (261 Mvt) using MFHU Transaction
3. Creation of outbound delivery using VLMOVE-303 Movement type- Outbound delivery contained HU - 303 Movement type
4. PGI of outbound delivery
5. Creation of inbound delivery using output type ZSPD
Now if i want to reverse the process i am doing below steps.
1. Deletion of inbound delivery after deleting assignement with inbound delivery as PGR is not yet happened
2. Reversal of Outbound delivery using VL09- 304 movement
3. Deletion of HU assignement and deletion of Outbound delivery
4. Now when i am reversing GR and GI document using HUCANC ----Getting Error
" Goods issue for repetitive mfg. cannot be reversed via handling units "
and
if we cancel using MF41 it is giving error message that
" Document is a handling unit document and cannot be reversed "
Please let me know how to cancel or reverse MFHU doucment i,e GR and GI document
Thanks/BR
Rupesh

hi rupesh ,
please go through below sap note it will help you resolve the issue :
425357 - Transaction MF41: Error VHURM041 for handling unit
regards,
satish

Diff between aam,recurring entries and sample document

Hello
What is diff between AAM,Recurring entries,Sample doccument
thanx & regards,

Hi
Account Assignment Model:
A reference for document entry that provides default values for posting business transactions. An account assignment model can contain any number of G/L account items and can be changed or supplemented at any time. In contrast to sample documents, the G/L account items for account assignment models may be incomplete.
Recurring Entries:
A periodically recurring posting made by the recurring entry program on the basis of recurring entry original documents.
The procedure is comparable with a standing order by which banks are authorized to debit rent payments, payment contributions or loan repayments.
Sample Documents:
Special type of reference document. Data from this document is used to create default entries on the accounting document entry screen.
Unlike an accounting document, a sample document does not update transaction figures but merely serves as a data source for an accounting document.
assign points if useful

Not possible to reverse the document in financial accounting Error

Hi All
We are getting invoice Data from Client
through ACC_EMPLOYEE_PAY02
Document Like
31 45699(vendor )    2356.00
31 45688 (vendor)    1245.00
31 45677 (vendor)    1000.00
31 45666 (vendor)    2000.00
40 Accur(Clearing)       6601.00
In this list some of vendors i did payment Run.
I need to reverse the 1 vendor open Item.
It is showing open item but i am unable to reverse this document.
i tried to FB03 but it is showing Below Error
Not possible to reverse the document in financial accounting
Message no. F5673
Diagnosis
Document '1900000003' in company code '1164' should be reversed. However,
this document was not posted in the Financial Accounting module, HRPAY is, rather, of type ''.
System Response
Documents which were not originally posted in Financial Accounting also cannot be reversed in Financial Accounting.
Procedure
Reverse the original transaction.
You can display the original document from the FI document via 'Environment' -> 'Original doc.'.
I tried to trace Original Document.
trhough Environment -> Original Doc.
ERROR is
Payroll Posting Document 000000091 does not exist
How to Reverse the Open Item.
raju.

Hi,
SAP doesn't allow you to reverse a document in FI if it was created subsequently from another module (in your case HR).
Why don't you use F-44 transaction code to manually clear the open vendor line item and offset it against the same clearing account?
Regards

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Not possible to reverse the document in financial accounting

Not possible to reverse the document in financial accounting
Message no. F5673
Diagnosis
Document '5000082' in company code '1000' should be reversed. However, this document was not posted in the Financial Accounting module, VBRK is, rather, of type ''.
System Response
Documents which were not originally posted in Financial Accounting also cannot be reversed in Financial Accounting.
Procedure
Reverse the original transaction. You can display the original document from the FI document via 'Environment' -> 'Original doc.'.

Proabably you are using Billing
Reverse at VF11 - Cancel
Other wise go to FB08 and enter FI docuemtn and go to environment and Original document there you can find the Billing number and then go to cancel at VF11

Error:-document is in transfer for purchase order..creation is not possible

Hello,
While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
can anyone please suggest me solution on this type of error?

Hi,
Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
regards,
MRao

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

Since one of the updates of firefox it is not possible to add a document to my email i.e. Telfort.nl

Since one of the latest updates of firefox it is not possible to add a document to my email account i.e. Telfort.nl
I checked with Telfort and no problems of this kind is known.

You can check for problems caused by extension and plugins.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins
You can try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
* http://kb.mozillazine.org/mimeTypes.rdf
* http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can try to reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
Reset creates a new profile and tries to import some settings from the old profile leaving the old profile intact.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Document Contains Errors - Approval not possible

Hi,
We are having issue in our Invoice Workflow.
When ever the approver is trying to approve the document, he is getting the error message "Document Contains Errors -> Approval not possible".
We have verified the document and check for error messages and found the below error messages on the Document.
E BBP_PD 047 Posting period 006 2011 is not open.
The document was submitted some time in the first week of December and as part of AP process the posting period will be closed during the first week of every month. This is a common business case and why is it stopping from posting the doc?
FYI..this Invoice is posted against the WBS element.
Pls give some insight on this and how to address the issue.
Regards,
Satya

Hi,
The posting date in the invoice is referring to the past period which is closed.You will have to change the invoice posting date to current period date and then process.
Regards,
Sanjeev

Sample document : "simulate" not possible ?

Similar Messages

Maybe you are looking for