Sample Editing Problem

Hi there.
I dont know if i'm missing something obvious here.
I have a sample in logic which when i try and resize it, all the copied versions of the sample resize themselves as well!
How do i make it stop doing this? It's doing my head in.
Cheers x

Hi,
look into your bin: If all the "copied" versions you mean are regions that rely to the same physical audio-file, every single one of these regions will be affected.
So if you want to edit only one region, you must use another copy of the original audio file.
In the Sample-editor, select the region you want to work with and select File-Save as... or save selection (i have the german version and don't know the exact name of the menu items in english, sorry).
So you will save a new physical version of the original file, a new real audiofile which will automatically be added to your bin. Work with this copy, and the original file will be left as it is, and all regions that rely to it.
Fox

Similar Messages

Sample Edit window - no waveform display

When I have a pretty loaded up song that's stretching the memory I find that if I try to open an audio file in the sample edit window the window is just blank with no waveforms or menues. Re-booting can solve the problem for a while then it returns midway through working on the song. I guess it's just Logic running out of internal memory (I have as much RAM installed as Logic can currently access).
Anyone have any sugestions/solutions? I've done the usual undo history thing and tried to rationalise the memory and am reluctant to start dissing plug-ins/instruments to gain the memory back - "re-organize memory" has no effect.
When this occurs I can continue to load extra plug-ins and open new instruments so the memory isn't totally maxed out but perhaps too loaded to handle the waveform display in the sample edit window.
All other elements work OK when this problem exists.
Julian

John, the thread you mentioned now seems to have a solution to the problem
it worked on my system.
http://discussions.apple.com/thread.jspa?threadID=152915&start=30&tstart=0
Dual 2.7 G5, 8 GB RAM, 2x400 GB Drive Mac OS X (10.4.4) QT 7.01, Logic Pro 7.1.1

Sample Rate Conversion in Sample Edit Window

The option to sample rate convert in the sample edit window appears to have disappeared (was in Logic 7) This enabled destructive editing (sample rate conversion) of a selection of an audio file. There are a number of sound design or problem fixing reasons I have used this feature in the past.
The only option is now to copy, convert and replace the whole file and as this is not destructive if you wanted to apply the same changes to a number of different mixes (saved as different songs) this is now also no longer possible.
Is this feature available on another menu? (Time and Pitch machine will not do the same function)
Julian

Hi tslr...
I am thinking that ever since Apple came out with Core Audio architecture they basically put it in every audio app that they had, that said- Apple's buyout of Emagic was most probably where they were able to get allot of the Core Audio architecture from, (there is a memo somewhere about this- quite public knowledge)...
Basically after OS9 and the buyout it was really cool to see parts of logic running around the OS, (Midi preferences etc.)
Then Garageband...
I think what I am trying to say is that this is most probably some functionality that is occuring due to Core Audio Services- not Waveburner- so most probably there is a release note somewhere discussing Sampling Rate Agnostic's. (Actually come to think about it I think it was a new feature of Logic Pro...
Regards
Alex
PS: I wouldn't think that it would matter about being in 48 or 44.1- so don't loose sleep over it.

9.1.1 Sample edit/factory menu definite crash bug!!

this is a definite/repeatable bug in 9.1.1 which causes crash
goto sample edit window
then select time and pitch or any Factory menu items
exiting window by pressing screen set 1 key command crash happens evey time 1 track of audio no plugins
cannot work with 9.1.1 as a result
and you didnt fix screen set/display text only jumping window bug anyway, even when you said you had on release notes!!
come on apple

this is a definite/repeatable bug in 9.1.1 which causes crash
goto sample edit window
then select time and pitch or any Factory menu items
exiting window by pressing screen set 1 key command crash happens evey time 1 track of audio no plugins
Yes indeed ,Logic crashes.
cannot work with 9.1.1 as a result
You can work with Logic if you don't use that function at the mo,until they fix it.
Which function are you specifically using,and what you'd like to achieve?Maybe there's a different way to do it.
come on apple
Use the [Logic Pro Feedback page|http://www.apple.com/feedback/logicpro.html] here it's a user to user forum.
A

Font / text edit problem in photoshop CS6

Hi there,
I have a strange text edit problem in Photoshop CS6 running on Mavericks.
Every time I use the text-tool in PS, write a sentence, mark it and change something like color, font size etc., the marked text vanishes.
I have to "undo" the last step and the changed text appears again.
Every time!
I have a clean installed CS6 with no plugins and no other than system fonts installed.
Everything on a new Mac Pro with OS X 10.9.5
Any clues? Thanks.

Do you have the latest updates for photoshop cs6?
You can use Help>Updates from within photoshop cs6 to check if there are any available.
Also, if you go to Help>System Info from within photoshop cs6, you can see the Photoshop Version in the top line.
You should be on version 13.0.6
See if turning off Dictation solves the issue.
Go to System Preferences ---> Dictation and Speech -----> select OFF radio button .

Sample edit window Help!

How can I play a selection In the Sample edit window with a key command?
If I hit Space bar (my play/stop key command) it plays from the beginning, but it doesn't play the selection, and it doesn't play even from the playhead.
Any ideas please?

Here's what I'm imagining:
you're using the main arrange window, you have your audio bin open as well as the sample editor. If you don't have the sample window selected, you may triggering from the audio bin. The tab key actually switches windows (within the arrange) and you'll see a subtle hi-lite of the active window.
Maybe that'll help?

Wierd behaviour in Sample Edit

In Logic Pro 8 in the sample edit window logic start cycling from the begining of the region with cycle off. and the only way to get it to stop is to close the window. And then when you open it up it starts cycling again. And btw whats up with no key command to play what you've highlighted in the sample edit window?

Well it turned out my preferences got corrupted, but still whats up with no play selection command in the sample edit window. And who thought it was a good idea to remove the output selector from the edit window and make a prelisten object in the environment?

Key command for playing region in sample edit window... doesn't work?

I'm trying to get the play/stop key commands to behave as they did in L7. I want to use the enter and zero keys on the number pad to start and stop playback in the arrange window. I want to use the space bar ONLY to play back the selected region when I'm in the sample edit window.
(reason being when you're flying back and forth between the two windows, it's all too easy to start the transport in the arrange window, an annoyance when editing individual pieces of audio in the sample editor)
When I assign the space bar to the key command "play/stop region" in the sample edit window, it only plays the entire waveform... i.e. it doesn't play only the highlighted region. This must be a bug. If you click the little speaker icon ("prelisten") in the sample editor, it will play the selected region only, but there's no hot key for this button.
Oddly, the "windows showing audio files" play/stop key command, DOES play only the selected region in the sample edit window, but unfortunately, this key command behaves globally, so if the arrange window is selected, it stops and starts playback there too, which I don't want.
Any ideas (besides a bugfix)?
Thanks...
Mitchell Sigman

Hi,
Prelisten is defaulted to ⌥M. You can reassign any keycommand though. See p. 159 of the LP8 User Manual.
regards, Erik.

Launch and edit problem from Dreamweaver to Fireworks

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266405159_588474
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi
Not sure if this is a Fireworks or Dreamweaver problem but
here goes.
I¹ve created a graphic in Fireworks CS3 on the Mac and
Exported the HTML and
related images. I open the HTML file in Dreamweaver CS3, all
fine so far.
Then I highlight the table and click the Edit in
Fireworks¹ button and it
throws up a warning dialogue saying Cannot launch and
edit. The Fireworks
table could not be found in the HTML. Please export from
Fireworks and
re-import the HTML into Dreamweaver.¹
What?!!
I¹ve only just exported it from Fireworks! It¹s
even got the Fireworks table
code in the Code section, so what¹s going here?
Has anyone else had this?
Gaz
--B_3266405159_588474
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
Hi<BR=
>
Not sure if this is a Fireworks or Dreamweaver problem but
here goes. 
I’ve created a graphic in Fireworks CS3 on the Mac
and Exported the H=
TML and related images. I open the HTML file in Dreamweaver
CS3, all fine so=
far. Then I highlight the table and click the
‘Edit in Fireworks&#821=
7; button and it throws up a warning dialogue saying
‘Cannot launch an=
d edit. The Fireworks table could not be found in the HTML.
Please export fr=
om Fireworks and re-import the HTML into
Dreamweaver.’ 
What?!! 
I’ve only just exported it from Fireworks!
It’s even got the Fi=
reworks table code in the Code section, so what’s
going here? 
 
Has anyone else had this? 
 
Gaz
</BODY>
</HTML>
--B_3266405159_588474--

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266407908_747577
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
When you export the sliced graphics from Fireworks it places
them into a
table. In my instance the code says...

So it recognises Fireworks was the the graphics app and jumps
back to it
when you want to edit the image. Fireworks then displays (or
should) a
Done¹ button over the window. You do your alts and
press Done to update the
HTML and graphics back in Dreamweaver automatically.
That¹s the only table I was referring to Murray.
On 4/7/07 3:02 pm, in article
[email protected], "Murray
*ACE*" <[email protected]> wrote:
> Why would you be wanting to edit the table in a graphics
editor, instead of
> an HTML editor?
--B_3266407908_747577
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Re: Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
When =
you export the sliced graphics from Fireworks it places them
into a table. I=
n my instance the code says... 
 
 
 
So it recognises Fireworks was the the graphics app and jumps
back to it wh=
en you want to edit the image. Fireworks then displays (or
should) a ‘=
Done’ button over the window. You do your alts and
press Done to updat=
e the HTML and graphics back in Dreamweaver
automatically. 
That’s the only table I was referring to
Murray. 
 
On 4/7/07 3:02 pm, in article
[email protected], "Murr=
ay *ACE*"
<[email protected]> wrote: 
 
> Why would you be
wanting to edit the table in a =
graphics editor, instead of 
> an HTML editor? 

</BODY>
</HTML>
--B_3266407908_747577--

Multiple Sample Edits

Hi all, was just wondering, is there a quick key to open up multiple regions in seperate sample edit windows. So for instance I select all individual regions on a track, hit the mysterious quick key, they all open in their own sample edit window, I apply my edits.
Any ideas?

Hey LowKey, I am alright, you?
The way I will often do this:
Save regions ( to process ) as audio file
Batch normalize in Peak while I work on something else.
Reopen the song when Peak is done.
Very easy and fast.
If you want to do this manually or have no app with batch processor ( there are many, Sample Manager is great for this work and cheap ) or only have a few edits per track:
Open the sample editor and arrange both visible ( tile windows horizontally )
Go through the arrange window with double click programmed in your mouse
select ( actually double clicking to bring the sample editor to focus ) region after region and press the key for normalize
Left hand then controls the selection, right presses "n" ( here, it is my KC for norm ).
Logic is fast with these edits but you should try a demo version of a batch processing software if you think you may be losing an hour+ every week. They work fast and in the background. I also script this stuff.
You can of course, just double click your way through it and have several documents open, as tedious, but a little different. Logic is versatile, but in a strange way, you are asking it to be something different ( a Sample Editor or Batch processor ) so it requires a little more work.
J

Sample Rate problem as well as CoreAudio overload and anyone using DFH?

I've only switched from Pro Tools to Logic Pro recently and am confused about a lot of things. I am running Toontrack DFH Superior with 7 audio tracks and one more software instrument track. I keep getting message about sample rate problem and something about conflict betwwen logic and external device. The only device I use is a M-Audio 49e MIDI controller and the M-Box, and I am running these on a Quad PowerMac G5 wih 4 GB RAM... I've tried to adjust the setting here and there, but none of them seem to work... Please help!

Often MIDI driver conflicts and processor overloads, or bottlenecks too. Freezing, removing old drivers, if you really are running Jaguar and if it is actually installed from those days then it is time to do a fresh install and maybe use Panther or Tiger. Panther can be found really cheap these days. As far as old drivers you don't use for any audio or MIDI interfaces you once used with your sytem, are there any? If so which ones? You may be able to direct yourself to your old driver uninstall by looking at the receipt of whichever driver you no longer use. Also, Jaguar was just really good at getting this message to come out, in my experience. Some plugins require alot of MIDI I/O or CPU power, some of NI's stuff really (momentarily) spikes on MIDI data input.

Sample rate problem

I have an odd sample rate problem: I have put in some music at 44.1 (while all other audio is at 48kHz.)
At most points this is, surprisingly, not an issue. But if I haved 4 channels of 48kHz sound then EITHER the 44.1 sound OR the 48kHz sound will not play.
Anyone know why this would be? I obviously need to redo the 44.1kHz sound - is there a quick and easy way to do this, or do I need to reimport everything seperately?

Export the 44.1khz audio as an AIF, 48khz, 16 bit file themn import the resulting file. Normally you'd want to do this with QT Pro before importing it into FCP.
-DH

Premiere Pro 7.1 serious Multicam Editing problems

Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
I have two serious Multicam Editing Problems.
PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
I would be grateful with your help.
Thank you,
Stavros Symeonidis

The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
I remind you that this only happens when multicam monitor is toggled at the program monitor.
Did all these help at all to even reproduce this situation?
Thank you,
Stavros Symeonidis

Does anyone know this Sample Edit function??

Hello,
I recently re-installed 8 on my computer and had to start over with my key commands. I lost one major for me and that was the one in the Sample Edit window when you highlight a section of audio and hit the space bar and it plays from where you highlighted.
Does anyone know what that is or a command for it? I checked in the key commands section under "Sample Edit Window" and tried every possible function and nothing worked.
Thank you for your time,
Anthony Mazza

Go to "Windows showing audio files" in the Key Command window and choose your key command for "Play Stop Selection".

FC studio2 editing problems with western digital my book home for mac

hi--bought a 1TB WD my book home for mac coupla years ago because it seemed like a good deal for so much space, and provided and eSATA hookup, too. Worked ok for a while. Now, with a growing Motion project that I bring into FC for overall color/levels/export adjustments, I'm getting a long-term beachball every time I try to do anything with it. Just did a complete reinstall of FC studio (after running Techtool pro 5 rebuild and optimizing files and volume), trashed the project and recreated it incase the file itself was corrupted, but the beachball keeps showing up once i try to get past a particular edit and play the file through -- something I haven't had problems with before. Have read this harddrive is a real POS/PIA for many because of its internal "sleep" setting and other weaknesses, and am thinking of cracking the drive out of its case and putting it into a plain eSATA/FireWire enclosure. Anybody else tried this or heard of it working? Money's a big issue right now (too many slow/no pay clients), so can't just run out and get a new drive and transfer w/out trying cheaper route first. Would appreciate feedback, cuz this is makin' me lose what little hair i got left!
Message was edited by: jayvee56
Message was edited by: jayvee56

My question says: "Final Cut Studio 2 editing problems"; I formatted the drive for the mac when i bought it: journaled HFS+, Apple Partition Map; 2 partitions (and connected via eSATA); which has been working fine as is up till now. The sequence and settings are those in which I've worked on many projects for years with no problems up until now. I am also completely up-to-date with all my app and system updates. I did begin to wonder after posting if the reinstall might be the source of my problems, but it was the interminable beachball waits that prompted the reinstall in the first place.

Sample Editing Problem

Similar Messages

Maybe you are looking for