- Sample File : Lead Import For Sales Force Automation
Hello All,
Please can any one share a sample file for lead import in sales force automation.I need to test with a sample file and confirm that everything is file.I have a sample file that am presently having issues with.
I will appreciate if anybody can help with the sampel file .
Thanks
Hello All,
Please can any one share a sample file for lead import in sales force automation.I need to test with a sample file and confirm that everything is file.I have a sample file that am presently having issues with.
I will appreciate if anybody can help with the sampel file .
Thanks
Similar Messages
-
Commission Calaculation for Sales Force
I want to know the configuration steps for commission calaculation for sales force depends upon the below stated criteria....
NOTE: In bold format those requirement to meet. Rest of those are set by the management earlier....
As Is requirements‎
<b>To- Be requirements‎</b>
Please refer below for the clarifications. There are few significant changes:‎
Step 1 Group Sales Target (Sales group will be given a sales target on a periodic basis. And ‎this will be built up by individual sales employee).‎
Required Fields: Period from (month/year) to (month/year)‎
‎ Sales Office:‎
‎ Sales Employee:‎
‎ Target Quantity:‎
<b>Requirements after discussion:‎
‎- The MD wants to put some targets for regional wise, sales office wise means for ‎
Example: Jeddah Region 100,000 SARs‎
‎ Riyadh Region 75,000 SARs‎
‎- Sales & Marketing manager can complete/ reach the whole target or including the sales men .‎</b>
Step 2 On Time Collection (Sales employee will get commission for on-time collection for the ‎revenue that he achieved in Step 1). ‎
Required Fields: Period from (month/year) to (month/year)‎
‎ Commission % (this commission could be in decimal %)‎
Condition should be 100% collection criteria. Need to see the no of invoices raised and whether ‎collected them individually. For example if 10 invoices raised for SR 10,000 each and on-time ‎collection has happened only for 5 invoices then he gets commission only for the 5 invoices ‎collected on-time (SR 50,000).‎
<b>Requirements after discussion:‎
‎ - In this condition they want to keep some targets per SALES MEN ‎</b>
Step 3 Sales Target for Selected Products (Sales employee will be given a target to sell certain ‎promotional products)‎
Required Fields: Period from (month/year) to (month/year)‎
‎ Sales Office:‎
‎ Sales Employee:‎
‎ Material:‎
‎ Target Quantity:‎
‎ Commission %: (This will get extracted from a separated table maintained ‎with material & commission %)‎
<b>Requirements after discussion: ‎
‎ Commission will get by the sales man on the basis of below stated Condition ‎
for Selected Material X for specified period X target amount ‎</b>
Conditions for getting the commission: ‎
‎ ‎
<b>‎1.‎ For getting the commission, the sales team must and should achieve the above 2 ‎conditions out of 3. Then only eligible for commission
‎2.‎ Commission will be get by the sales man based on in-time collections.‎
‎3.‎ ‎80% of the commission will be distributed among the sales mens.‎
‎4.‎ Rest of 20% the amount will be distributed among the Sales & Marketing Manager and ‎Coordinators on over all performance.‎</b>Hi,
there are two ways:
1. near-realtime, which is easier. Use SQL queries to get the information from real time tables from ICM. The information is not really realtime, since it is updated in 5-10 seconds interval.
2. CTI monitor, which might be challenging. Use the CTI interface of ICM to 'subscribe' for all/selected events, including state changes and then do your calculations. It's realtime, but again, programming it may take a while.
G. -
All .m4v files only import for 1 second (PRE 9/Windows 7)
Hi,
I'm a new PRE 9 user and am experiencing a really significant problem with importing .m4v files: Every .m4v I select ends at the 1-second mark and there does not seem to be any way to make the program see past that 1-second mark in the source file. Other file formats I've tried seem just fine, but most of the source material I want to use is already in .m4v files and have to think that this is some kind of bug.
Does anyone know what's going on here--and, more importantly, how to fix the problem so I can access the entire content of the .m4v files I want to use in PRE 9?
Thanks a lot and take care,
AlanHi Hunt,
Thanks for the rapid reply (and the welcome too). I think most of the files came from Handbrake (importing DVD content) if memory serves. All these .m4v files play just fine in Windows Media Player, QuickTime Player, etc.
I opened the properties for the last .m4v I tried to use (this morning) in PrE and the properties are listed as follows....
Type: MPEG Movie
File Size: 566.6 MB
Image Size: 718 x 370
Pixel Depth: 32
Frame Rate: 90000.00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;00;01;09
Average Data Rate: 425.3 MB/second
Pixel Aspect Ratio: 1.1847
MediaInfo documents the same (.m4v) files properties as....
General
Complete name : C:\Users\Alan\Videos\Advent\Advent performances\Advent at MARPROG (Franklin's shoot) DVD 1.m4v
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 567 MiB
Duration : 1h 6mn
Overall bit rate : 1 188 Kbps
Encoded date : UTC 2011-04-15 13:27:00
Tagged date : UTC 2011-04-15 13:43:34
Writing application : HandBrake 0.9.5 2011010300
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1h 6mn
Bit rate mode : Variable
Bit rate : 1 093 Kbps
Width : 718 pixels
Height : 370 pixels
Display aspect ratio : 2.25:1
Original display aspect ratio : 2.25:1
Frame rate mode : Variable
Frame rate : 29.970 fps
Minimum frame rate : 9.990 fps
Maximum frame rate : 29.980 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.137
Stream size : 521 MiB (92%)
Writing library : x264 core 112
Encoding settings : cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x111 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=2 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=0 / open_gop=0 / weightp=2 / keyint=300 / keyint_min=29 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=3 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Encoded date : UTC 2011-04-15 13:27:00
Tagged date : UTC 2011-04-15 13:43:34
Color primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 1h 6mn
Bit rate mode : Variable
Bit rate : 91.0 Kbps
Maximum bit rate : 339 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 43.4 MiB (8%)
Encoded date : UTC 2011-04-15 13:27:00
Tagged date : UTC 2011-04-15 13:43:33
Text
ID : 3
Format : Apple text
Codec ID : text
Duration : 1h 6mn
Bit rate mode : Variable
Bit rate : 1 bps
Stream size : 327 Bytes (0%)
Encoded date : UTC 2011-04-15 13:27:00
Tagged date : UTC 2011-04-15 13:43:34
Also, new PrE project appear to default to: "NTSC-Hard Disk, Flash Memory Camcorders-Standard 48kHz" (which I'm assuming is the default, as I don't recall changing anything).
I hope this information helps. Any insights as to how to get past this problem (bug?) would be greatly appreciated.
Take care and thanks again for your help,
Alan -
Addional lead time for Sales BOM kitting process
When a Sales Order BOM Sales Order is scheduled, we would like to have a lead time added for the Shipping kitting step. So the pick date will be X number of days before the ship date.
Is there a way to do this is ?
Thanks,
Doug Karien.Hi DK,
Go to Ent structure > Definition > LE > Define shipping point, choose your shipping point, click on detailsand check there, "Rounding work days" filed may provide you some soln.
Regards
SD -
Hello Anmol, I have a similar requirement where I need mass generation of mappings using Salesforce Objects as a source. As per your instruction, I used cloud version of Mapping Architect of Vision and create a template with normal source and target and Application Source Qualifier. I also mentioned Salesforce as the database type. However, when importing into Informatica PowerCenter Designer, it shows all other sources except for Salesforce sources. Can you please help me out. RegardsManish
Hi Munisekhar, Yes it is possible. In most cases it will be easier to create such a template directly in Visio. If you need to get the mapping from PowerCenter into Visio, make a copy of the original mapping and replace the Source, Target and ASQ (Application Source Qualifier that you link the source to) with a relational or a flat file source, target and SQ respectively. Then import it in Visio. Make sure to change the source, target and SQ again back to Salesforce specific objects. So when you import such a copy (that used relational or file objects) in Visio, do the following:1. Edit the source definition and change the Database Type to Salesforce2. Edit the target definition and change the Database Type to Salesforce3. Remove the object SQ (linked from source)4. Drag the ASQ object icon from the Informatica stencil and link it the same way the SQ was linked earlier. That should validate and work fine. Let me know if you still face any issues. Note: You might already be aware of this, but you use the standard SQ transform/object when you use a relational or flat file source, and use an ASQ transform/object when you use application sources like Salesforce. While doing this, make sure to retain your original mapping in PowerCenter so you can start from that again if you need to. Thanks and regards,Amol
-
Idoc to File Scenarion Using File Content Conversion for Sales order data.
Hi Frineds,
WOuld like to know in what strucuture should i design my output strucutre to get data from idoc coming from SAP system.
How to enbble file contenct conversion to get txt file.
Need a detial view of this scenario.
Please help.Hi,
Get the target file structure format from the system or applicaiton which wants to use this data...
Based on this create message type in ESR and then configure the FCC parameters in the file adapter ..
if the structure is available and based on that want to know FCC ..then post the same some one here can help..
based on your requirement structure needs to be implemented and mapping as well
HTH
Rajesh -
Best text file to import for Motion Scroll?
Hi,
I will be getting a copy of the credits to add to the end of a play.
What format should I ask for the text to be in? What works best in Motion 4? (RTF, PDF, etc)
Thanks.Watch this tutorial from Mark Spencer. It'll answer all your questions.
[MacBreak|http://pixelcorps.cachefly.net/mbks057_540ph264.mov]
Andy -
We are using Informatica PowerCenter 9.1 HotFix 1 with PowerExchange for Salesforce.Do Cloud Mapping Designer requires seperate license? We do not have Informatica Cloud license.
Hi Amol, Thanks amol for quick reply. i have created visio template as per your comments. at the time of validating the template it was showing error. Please find the below error. Thanks,Munisekhar N
-
I read somewhere that master collection cs5 includes sample files/media etc for encore but i cannot find them
on my cs5 install disk set
Anyone know how to get these? ie menus/buttons and other stuff etcHi Stan
Thanks for your reply
No
Chris -
Hi
experts what is sales force automation how to configure it let me know the path
MadhaviHi
As per my knowledge Sales force and activity management is Same so you have to configure for this Under Activity management for Sales Executives tasks
Reward if helpful
Venkat -
Lead import - Primary contact point not found for sales lead contact
Hi All, I am looking for a solutions, This is Leads import :
Concurrent program:
Import Sales Leads - Any clues ???
Starting child process# 1
Sales Lead Import Child #1 started at 26-Mar-2008 10:21:46
Getting the saleasforce_id for the user ...
Salesforce_id for the logged in user is : 100012066
Processing import_interface_id: 14002
budget: currency:USD
Value of currency :USD
Before calling custom hook for party match
Returned from custom hook with party_id:
Start DQM - TCA Processing
Starting DQM - TCA time: 20080326102146
#1 :: Calling FIND_PARTIES with OSR found = N
rule_id 33
After find_parties matches 0
No party match found !
Contact blind search begin: using FIND_PARTIES (Person)
No person match found !
DQM returned: YYYY-NNNN
Call user_hook is false
Creating location
Location created: 7322
Organization created: 173251
Creating party site for Organization
Creating PartySite for 173251:7322
ORGANIZATION Party Site created: 120133
Creating Party Site Use
PS Use created: 124173
Creating the Contact
Contact created: 173252
Creating Relationship
subject_id 173252
object_id 173251
Creating OrgContact
OrgContact created: 110104
Party Relationship created: 110153:173253
Creating party site for Relationship
Creating PartySite for 173253:7322
REL Party Site created: 120134
Creating Party Site Use
PS Use created: 124174
Creating contact point (1)
End DQM - TCA time: 20080326102147
Start Create - Process Lead time: 20080326102147
do_create_saleslead:Start
Total Lead Lines: 0
Primary contact point not found for sales lead contact
create_sales_lead:Start
The column(s), SOURCE NAME, must exist. The missing column is either required by the database or required based on the data that is being imported.
do_create_saleslead failed
Message Count:1
Batch Size:1
Number of Records Successfully Imported:0
Number of Records with Errors:1
Number of Records with unexpected Errors:0
End Child Import Process time: 26-Mar-2008 10:21:47
Message was edited by:
J.HarshaCan you please tell us your EBS version? - 11.5.10.2Thanks - Nagamohan
I had a SR: this is the solution
Can you please check the profile value 'OS: Source Code Mandatory for Leads' on all levels ( Site, application, responsibiloty and User). If the profile is set to Yes, please set it to N -
Sample file for TBDM (market data import) required
Dear Experts,
Please help me with sample file or file format with some dummy data to run the transaction TBDM for currecny rates upload.
i tried witl all possiblities some or the other error comes.
Appreicate you <removed by moderator> help.
Bharathi.J
Edited by: Thomas Zloch on Apr 20, 2011 1:00 PM - priority adjustedHi,
This question is very old but when you look for this in Google this is the first page that comes up.
To make your own uploadable table in Excel you need to follow this structure:
Required means that you must fill that field and Empty means that should leave it blank.
The length describes the length of the field. It's very important the length of the field because if you don't use that length then it won't work the upload.
1 Data Class (Fixed value '01') - Length 2 - Required
2 Key 1 FROM currency - Length 20 - Required
3 Key 2 TO currency - Length 20 - Required
4 Category Interest type - Length 15 - Required
5 Date Calculation Date (Format DDMMYYYY) - Length 8 - Required
6 Time Calculation Time (Format HHMMSS) - Length 6 - Empty
7 Value Value of Data - Length 20 - Required (Use dot for decimals not commas)
8 Currency Not applicable - Length 20 - Empty
9 FROM Ratio Translation Ratio from - Length 7 - Required
10 TO Ratio Translation Ratio to - Length 7 - Required
11 Other Not applicable - Length 5 - Empty
12 Status Error status (values 50..99) - Length 2 - Empty
13 Error message Error message - Length 80 - Empty
In excel you can define the column width with right click in the column. Doing that define every column with the previous length exposed. Fill the required fields.
You should use define every field in "Text" format because numbers like the first one: 01, must be 01 and it won't work with just 1. The same with date, if you have a date like 5012015 it won't work and has to be 8 digits like 05012015 (05.01.2015)
After you define every column width and define the required fields. Remember to delete the headers if you used them.
Save the file as .XLS because if you save it instead as .prn you won't be able to use it again. Finally save the file as .prn (Formated Text Space Delimited) and upload TBDM. Every time you need to upload again open the XLS file, put your data and save as .prn
And that's it
Message was edited by: Pablo Romo -
Informatica - import data from line 6 in sample files in universal adapter
Hi ,
I am trying to extract data from R12 tables to sample CSV files provided by oracle in universal adapter CRM analytics.
As per oracle guidelines we are supposed to import data from line 6 as first five lines will be skipped during ETL process.
While importing the the target file in target designer ,I am entering 6 as value in the Lov box "Start import at Row".
Still Data is loaded from first line of the file and not 6 th line.
Please let me know more on how to achieve this requirement.
Thanks,
Chaitanya.HI,
Please let me know the solution for this.It is very high priorirty for me now.
I want to extract data into sample files provided by oracle starting from 6 th line.
At present I am able to load from first line of the .csv file.
Thanks,
Chaitanya -
How to prepare the Format of Flat file(Excel or Text file) for sales order
Hi All,
My requirement is to prepare the Flat File formats(Excel or Text file) for sales order Conversion using BAPI by COB.
Needed Sample Excel or Text flat file .
Thanks for all.
Regards,
Chowdary
Moderator message : Search for available information. Thread locked.
Your similiar question [Flat files formats|Flat files formats] has been already locked for similiar reason. Read forum rules before posting.
Edited by: Vinod Kumar on Jul 8, 2011 9:36 AMHi,
You can use something like this:
switch(cell.getCellType()) {
case Cell.CELL_TYPE_STRING:
System.out.println(cell.getRichStringCellValue().getString());
break;
case Cell.CELL_TYPE_NUMERIC:
if(DateUtil.isCellDateFormatted(cell)) {
System.out.println(cell.getDateCellValue());
else {
System.out.println(cell.getNumericCellValue());
break;
case Cell.CELL_TYPE_BOOLEAN:
System.out.println(cell.getBooleanCellValue());
break;
case Cell.CELL_TYPE_FORMULA:
System.out.println(cell.getCellFormula());
break;
default:
System.out.println();
Hope it helps,
Daniel -
How do I import Map Info Tab files into Spatial for a map of europe?
How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
Any Help welcome :|
TimTim,
MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
Andy Greis
CompuTech Inc.
Maybe you are looking for
-
How To Block logging of 405's to Event Log?
I've got a webserver accessible to the outside world that comes under constant vulnerability scans, many of which involve accessing .exe filetypes. When any of these scans are made, not a 404, but a 405 error message is generated. Each 405 is stored
-
IPad iCal Apointments' Time Off by 1 Hour
I mostly schedule appointments using my iPhone, in checking out the iCal App in our new iPad I noticed they all were scheduled 1 hour later than what I entered on my iPhone. We moved recently from Pacific time to Mountain time, I corrected the iPhone
-
Selection Interface for large database
I am looking for a working example of a CF selection field that fills or builds a name list as you type. The database has about 600,000 names with 400 new people being added each day. I am looking for a smart tool that watches you type and brings d
-
Strange sounds in the background - malware?
Hi, what I'm going to say may look like a joke, but it is not. It's an annoying problem that worries me and I have no one I could consult about it. For some time now – I can't say exactly for how long – I've been hearing strange animal sounds in the
-
Hooking An Electric Guitar up to Garage Band 3 on Intel iMac
This question probably seems a little basic, but this is my first mac since the Mac 128's and I'm not sure where I'm going wrong here. So basically, I want to hook my Floyd Rose electric guitar up to my intel duo core iMac for the first time. This is